how to flash huawei C8511 (mts mtag) if I by chance brick it during rooting?
I've tried z4root and the procedures from this forum for my phone MTS Mtag (Re-branded Huawei C8511 - India), but unfortunately it failed. Now I realize that, z4root v 1.3 can not root Android 2.2.2.
Waiting for an update of z4root.
SuperOneClickv2.2-ShortFuse
i tried google "SuperOneClickv2.2-ShortFuse.zip"
& it works & can be unrooted if required
Me too finally rooted my MTS Mtag (Huawei C8511)
Me too finally rooted my MTS Mtag (Huawei C8511) with SuperOneClickv2.3.3 from the Developer Site ShortFuse.Org.
I Followed these steps....
(1) Downloaded the latest version (on 5 May 2012) SuperOneClickv2.3.3 from the developer website ShortFuse.Org
(2) Unzipped the file downloaded in PC
(3) Connected my phone (I've already installed the essential drivers of my phone and using the "Hi Suite"(its a PC Suite) provided by Huawei)
(4) Click on Root button on the application
(5) After few seconds it shows my phone is Rooted. I've restarted my phone, and Now my phone is Rooted.
Simple steps, right???
-
DreamzVp
RE: Flashing Huawei C8511
To answer the original question
Its very easy lol
Download the firmware here - C8511 V100R001C96B638
Then extract to a folder of your choice.
Copy the 'dload' folder to the root of your SD Card.
Turn your phone off completely (I always recommend removing the battery for 30 seconds or so)
Press your volume up and volume down keys and hold, then the power key and hold.
Your phone should display the update screen - see here - Step 8.
Leave it to finish and restart (may restart twice so don't worry lol)
Your phone should now be restored to when you started messing with it
BTW - You will need to re-root and this will delete EVERYTHING so only use if you've bricked it or royally screwed it up
I rooted this phone and removed all carrierware. I am proud to say I am the first guy to modify this phone and start 1x/Evdo on this phone. I somehow cannot make it to remove carrier name. Tried a lots in framework-res.apk but phone firmware is getting crashed and re-install is mandatory. Huawei c8511 is a low activity unrecognized device, we cannot expect anyone to help.
I have searched and found out over 100 custom roms for MTS Mtag-301 (known as Huawei C8500s in China). Was trying hard to flash recovery to swap custom roms. Got a recovery tool which can flash recovery to Huawei C8511 in few seconds. The steps are given below.
1. Download CWM Recovery C8500s 4.0.1.5 (English)
2. Extract the contents to any folder anywhere.
3. Switch off your phone and restart to go to fastboot mode. Press power+volume down keys continously for 10 seconds till the boot logo stays continously.
4. Open the extracted folder and run recovery.bat (batch file), this process will take a max 3 secs and the handset will reboot, let it settle down.
5. Again switch off and press power+volume up keys together and cwm recovery menu should appear.
6. Comming soon.. 2.3.5 and 4.0.3 versions for MTS Mtag 3.1 (Huawei C8511)
http://www.4shared.com/rar/sH3Ar38z/CWM_Recovery_HUAWEI_C8511_c850.html?
Kingroot (Chinese)
The one single rooting application for all Huawei phones and other devices. It is a chinese apk for those who can use it. I take no credits for this.
How did u start 1x/evdo
dr.faramroze said:
i rooted this phone and removed all carrierware. I am proud to say i am the first guy to modify this phone and start 1x/evdo on this phone. I somehow cannot make it to remove carrier name. Tried a lots in framework-res.apk but phone firmware is getting crashed and re-install is mandatory. Huawei c8511 is a low activity unrecognized device, we cannot expect anyone to help.
Click to expand...
Click to collapse
please can u help what did you do to start 1x/evdo i have rooted the phone and installed the recovery
t_avin said:
please can u help what did you do to start 1x/evdo i have rooted the phone and installed the recovery
Click to expand...
Click to collapse
Look for my post on RIMweb forum.
EVOing on Reliance using Tapatalk
Hey how you rooted your phone and done recovery
Sent from my Spice Mi-270 using xda premium
dr.faramroze said:
I rooted this phone and removed all carrierware. I am proud to say I am the first guy to modify this phone and start 1x/Evdo on this phone. I somehow cannot make it to remove carrier name. Tried a lots in framework-res.apk but phone firmware is getting crashed and re-install is mandatory. Huawei c8511 is a low activity unrecognized device, we cannot expect anyone to help.
Click to expand...
Click to collapse
hi
can you tell me are you able to unlock this phone
JohnnyParanoia said:
To answer the original question
Its very easy lol
Download the firmware here - C8511 V100R001C96B638
Then extract to a folder of your choice.
Copy the 'dload' folder to the root of your SD Card.
Turn your phone off completely (I always recommend removing the battery for 30 seconds or so)
Press your volume up and volume down keys and hold, then the power key and hold.
Your phone should display the update screen - see here - Step 8.
Leave it to finish and restart (may restart twice so don't worry lol)
Your phone should now be restored to when you started messing with it
BTW - You will need to re-root and this will delete EVERYTHING so only use if you've bricked it or royally screwed it up
Click to expand...
Click to collapse
link not working… file deleted
New link
abhinav2hd said:
link not working… file deleted
Click to expand...
Click to collapse
C8511 V100R001C96B638
New link.
Unfortunatly Mediafire decided to suspend my account for the n'th time and I decided not to fight them again, so have uploaded most to different hosts.
JP
JohnnyParanoia said:
C8511 V100R001C96B638
New link.
Unfortunatly Mediafire decided to suspend my account for the n'th time and I decided not to fight them again, so have uploaded most to different hosts.
JP
Click to expand...
Click to collapse
thanks for new link
dr.faramroze said:
I have searched and found out over 100 custom roms for MTS Mtag-301 (known as Huawei C8500s in China). Was trying hard to flash recovery to swap custom roms. Got a recovery tool which can flash recovery to Huawei C8511 in few seconds. The steps are given below.
1. Download CWM Recovery C8500s 4.0.1.5 (English)
2. Extract the contents to any folder anywhere.
3. Switch off your phone and restart to go to fastboot mode. Press power+volume down keys continously for 10 seconds till the boot logo stays continously.
4. Open the extracted folder and run recovery.bat (batch file), this process will take a max 3 secs and the handset will reboot, let it settle down.
5. Again switch off and press power+volume up keys together and cwm recovery menu should appear.
6. Comming soon.. 2.3.5 and 4.0.3 versions for MTS Mtag 3.1 (Huawei C8511)
http://www.4shared.com/rar/sH3Ar38z/CWM_Recovery_HUAWEI_C8511_c850.html?
Click to expand...
Click to collapse
thanks very much
update rom can fins here...http://www.needrom.com/download/huawei-c8500-3/
ROM Version: ROM Android 4.0.4
after flashing this rom phone nottt starting....it restart from logo ..............................................
here is full details about custom rom instalation to huawei c8511
http://forum.gsmhosting.com/vbb/f92...-mts-mtag-3-1-custom-rom-cyanogenmod-1914191/
http://forum.gsmhosting.com/vbb/f929/huawei-c8511-c8500s-mts-mtag-3-1-custom-rom-cyanogenmod-1914191/
Related
So I'm trying to learn a little more about exactly what all these terms really mean, but when I was reading a guide about rooting the Huawei U8650 (Sonic), the first step was to flash the phone with the original ROM.
Now with all the big terms used and all the disclaimers about bricking your phone, I was just wondering what exactly this does. I currently plan to flash my Huawei U8651T (aka T-Mobile Prism) with the original ROM for Huawei U8650 because from what I've read, they are the same phone, except the U8651T has some tech upgrades compared to the U8650, so I just wanted to know exactly what would I be doing to my phone and what potential problems may arise.
Thanks
Edit: Here's the guide I was reading (Can't post the link, but here it is copy-pasted)
To root U8650 you should flash it with original Rom, Spanish devices dont need original rom to root dont know why it is but it is
ROM
It is necessary to download an official ROM
LINK
After you download it unrar it and dload folder copy to memory card
Path should look like \ dload \ update
to flash device you need to
turn it off
remove the battery for 5 seconds
put the battery back in
press the buttons "VOL +" + "VOL-" + "ON" (all three keys at once)
and will start automatic firmware upgrade
for 3-4 minutes cell is debranded
If you get error not found firmware that means that you did not put the firmware on the SD card like you should (I got it a few times) just off the device and repeat the procedure.
root
After flashing unbranded firmware we can throw at root
software needed for the root LINK
This is similar to debranding.
download root file
Put it on SD card
turn off the phone
remove the battery for 3 seconds
Press "VOL +" + "ON" (without the vol-)
When you open the "bios like" menu use the volume keys up/down to select the update from memory card called root
after this procedure just reboot the phone and you have rooted phone
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
not screwed
promoking said:
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
Click to expand...
Click to collapse
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
hope he follows up with a thank you.
milindchitale said:
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
Click to expand...
Click to collapse
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hii,
Finally I reached on TWRP. Can I copy the Stock ROM Zip file in Memory Card and then install memory card on phone. And from Install in TWRP I can go the SD Card location and install it from there? Possible ?
Actually there was no battery on phone that is why the phone was not booting up to TWRP mode. Now I'm in TWRP and downloading Stock ROM. Hope it get fixed soon.
Many Thanks and Regards
promoking said:
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Click to expand...
Click to collapse
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
adfurgerson said:
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
Click to expand...
Click to collapse
Hi,
Now I'm downloading ...
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
I guess this is original ATT LG E970 Firmware. I will copy it into my external Memory Card and then will insert into phone. After that using TWRP I'll be going to use this Zip file and after that factory reset. Am I correct ? Do I need to follow different steps ?
Let me know. Moreover do I need to unlock Phone again? When I received it was already in Unlocked State. So installing the above link firmware will lock it again? Or should I proceed with the link I posted earlier, I mean this ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
And Rename File to .bin instead of .tot and Make ZIP it again ?
Please let me know.
PS ; I'm still Downloading The firmware from Ist link.
Regards
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hi, I tried these ROMS,
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
and downloaded today ..
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
Both are not working. ON TWRP it is saying ..
MD5 File NOT FOUND
ZIP File Signature VERIFICATION FAILED
Error in Flashing Zip
Please help?
Edit : I also tried Unticking ZIP File Verification. But still it says .. "Error in Flashing Zip"
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
pottyvick said:
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
Click to expand...
Click to collapse
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
promoking said:
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
Click to expand...
Click to collapse
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
pottyvick said:
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
Click to expand...
Click to collapse
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
promoking said:
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
Click to expand...
Click to collapse
in fast boot, what happens when you push the volume down button?
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
promoking said:
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
Click to expand...
Click to collapse
push the volume buttons, it will change the recovery mode to other options... Push the volume buttons on the handset...
pottyvick said:
in fast boot, what happens when you push the volume down button?
Click to expand...
Click to collapse
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
promoking said:
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
Click to expand...
Click to collapse
sorry, you're right... have you tried to manually get into download mode?
Poweroff phone>connect usb cable to phone (not to computer yet)>hold down (both) volume up/volume down>connect usb to computer (while holding down volume buttons)
pottyvick said:
It gives you only those 4 options? there is no other option>?
Click to expand...
Click to collapse
No Sir, I get only these 4 options above that Green Figure.
promoking said:
No Sir, I get only these 4 options above that Green Figure.
Click to expand...
Click to collapse
I edited my comment sorry...
I successfully rooted my huawei g610 u20, and installed a couple of rooted apps. Last night I installed the Root toolkit app for changing my phone's fonts and it never booted since then. I cant get passed by the boot animation and it gets stuck on the huawei logo. I have no idea what to do. I googled up a couple of solutions with no luck. I did find one or two roms but I don't know how to flash them since I don't have a custom recovery installed. All I have is the Android system recovery <3e> (which I can activate by pressing the vol up + power button). But it wont let me install any rom from sd. Help would really be appreciated guys. ;(
Search for your phone firmware on google, copy the dload folder on your SD card (using a sd card writer) and press the power button and the vol up and the vol down at the same time
johndroid1999 said:
Search for your phone firmware on google, copy the dload folder on your SD card (using a sd card writer) and press the power button and the vol up and the vol down at the same time
Click to expand...
Click to collapse
How do I know that which firmware version should I use?
HamzaLV said:
How do I know that which firmware version should I use?
Click to expand...
Click to collapse
Google "Huawei G610 u20 stock firmware download" and you should find it, then follow my instructions
can you find me a rom for G610 U20 in English and support arabic ples :angel:
Last night, i accidentally swiped to restore to an older ROM that i had. Not meaning to do this, and beginning to panic, i attempted to stop it, while it was still at 0%. I did this by holding the red button down. As i have now realised how stupid that was, i am wondering if there is any chance to fix it. It is now stuck on the Sony logo. Although i have seen many problems here, i cant find anyone that had the same problem as me. I was running the existenz ROM, and the ROM i was accidentally restoring to was the official ROM. Please help me
Thank you
thetechant said:
Last night, i accidentally swiped to restore to an older ROM that i had. Not meaning to do this, and beginning to panic, i attempted to stop it, while it was still at 0%. I did this by holding the red button down. As i have now realised how stupid that was, i am wondering if there is any chance to fix it. It is now stuck on the Sony logo. Although i have seen many problems here, i cant find anyone that had the same problem as me. I was running the existenz ROM, and the ROM i was accidentally restoring to was the official ROM. Please help me
Thank you
Click to expand...
Click to collapse
Does the phone go into flash mode?
sam_conrad said:
Does the phone go into flash mode?
Click to expand...
Click to collapse
yes, i can access it by holding the up button and power button while insterting the USB cord into the phone
thetechant said:
yes, i can access it by holding the up button and power button while insterting the USB cord into the phone
Click to expand...
Click to collapse
Enter flash mode and flash the stock firmware
thetechant said:
Last night, i accidentally swiped to restore to an older ROM that i had. Not meaning to do this, and beginning to panic, i attempted to stop it, while it was still at 0%. I did this by holding the red button down. As i have now realised how stupid that was, i am wondering if there is any chance to fix it. It is now stuck on the Sony logo. Although i have seen many problems here, i cant find anyone that had the same problem as me. I was running the existenz ROM, and the ROM i was accidentally restoring to was the official ROM. Please help me
Thank you
Click to expand...
Click to collapse
I had the exact same problem, I created a guide to help other people with this problem. Here it is. I can't post links yet but if you want to have a look, search for this on google ( oneplus : Xperia z2 bricked help!! ) It's the first link ( fourms Oneplus Net )
---------------------------------------------------------------------------------------------------------------------------------------
To get Sony's UI/ROM back:
Download and Install Flashtool from here.
Download a proper ( official ) ftf firmware for YOUR phone ( eg Sirius ).
Now copy the downloaded ftf firmware file to ( C:\Flashtool\firmwares )
Open the Flashtool and click on the little lightning rod and choose Flashmode.
Now a window will pop up and ask you to choose firmware for your device, Choose the one you downloaded and click flash.
--------Choosing a wrong one WILL further brick your device--------
Meanwhile, turn your phone completely off, To do this hold the Power button and the volume UP button until you feel your phone vibrate 3 times.
Flashtool will pop up saying you need to put your phone into flash/fastboot mode.
Now put it on fastboot/flash mode ( connect the usb to your computer and hold down the volume up button while plugging the other end to your phone. Your phone's LED should be blue at this stage.
The flashing process will start and once it's done, Flashtool will ask you to unplug the device and restart the phone.
The first boot takes 5-10 minutes.. CONGRATS YOU HAVE UN-BRICKED YOUR PHONE.
Now if you want to root your phone and install a custom recovery ( TWRP ), Download this package and extract it on your desktop
Make sure you have usb debugging turned on ( on your phone )
Navigate inside " to root" folder and run install.bat
Once thats done, to install recovery, navigate inside the " recovery folder " and run install.bat
Make sure to follow on-screen instructions. ( your computer and your phone )
Now you have Rooted sony ROM.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
ArrowHunt3R said:
I had the exact same problem, I created a guide to help other people with this problem. Here it is. I can't post links yet but if you want to have a look, search for this on google ( oneplus : Xperia z2 bricked help!! ) It's the first link ( fourms Oneplus Net )
---------------------------------------------------------------------------------------------------------------------------------------
To get Sony's UI/ROM back:
Download and Install Flashtool from here.
Download a proper ( official ) ftf firmware for YOUR phone ( eg Sirius ).
Now copy the downloaded ftf firmware file to ( C:\Flashtool\firmwares )
Open the Flashtool and click on the little lightning rod and choose Flashmode.
Now a window will pop up and ask you to choose firmware for your device, Choose the one you downloaded and click flash.
--------Choosing a wrong one WILL further brick your device--------
Meanwhile, turn your phone completely off, To do this hold the Power button and the volume UP button until you feel your phone vibrate 3 times.
Flashtool will pop up saying you need to put your phone into flash/fastboot mode.
Now put it on fastboot/flash mode ( connect the usb to your computer and hold down the volume up button while plugging the other end to your phone. Your phone's LED should be blue at this stage.
The flashing process will start and once it's done, Flashtool will ask you to unplug the device and restart the phone.
The first boot takes 5-10 minutes.. CONGRATS YOU HAVE UN-BRICKED YOUR PHONE.
Now if you want to root your phone and install a custom recovery ( TWRP ), Download this package and extract it on your desktop
Make sure you have usb debugging turned on ( on your phone )
Navigate inside " to root" folder and run install.bat
Once thats done, to install recovery, navigate inside the " recovery folder " and run install.bat
Make sure to follow on-screen instructions. ( your computer and your phone )
Now you have Rooted sony ROM.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
Thank you so much, as i have a mac, instructions had to be changed a little, but i was able to revert to a proper ROM again, and now have a fully functioning phone again. Thank you so much again.
thetechant said:
Thank you so much, as i have a mac, instructions had to be changed a little, but i was able to revert to a proper ROM again, and now have a fully functioning phone again. Thank you so much again.
Click to expand...
Click to collapse
No problem Always here to help.. if i can
Currently, I'm making a toolkit for all xperia z devices, just hoping it goes according to plan
Hi,
I bought lenovo tab 2 A7-10f for my brothers birthday.
After one week of using it he brought it back to me with words: I broke it.
He rooted (Kingo software) the Android system and than he cleaned some system apps which caused the crash of the system.
Now when I start it the boot stops in lenovo welcome animation and I can't get to boot mode anymore (pushing volume and start button) the system freeze in welcome screen with lenovo and android logo - no martian.
When I tried to connect by ADB the device appeared to be "offline" and I can't reach it.
Can you help me, please?
OS ANDROID 4.4
CPU: MTK 8127 QC 1.3GHZ
You need lenovo flash tool and latest rom. T2-A7-10F_USR_S041_150112_ROW or another.
power off your tablet.
push volume down and connect with your computer.
tablet will start and show he is charching.
Start flash tool. load the scatter file. In above rom it is : MT8127_Android_scatter.txt
once loaded push download.
some files will go to your tablet. If flash tool quickly stops , power off your tablet, but leave the usb cable.
Once powerd off , flash tool will continue.
when het is finished , you will see this on your computer.
disconect and restart tablet.
2nd possibility : power off you tablet
hold 3 buttons. Poweron , + and -
when tablet vibrates , release powerbutton but do not release + and - button
now your tab will start in recovery. here the tab says : no command and you push the powerbutton to see the menu.
there you can choose : wipe data/factory reset
after reset choose to reboot.
if this factory reset does not restore you tab , you must flash the rom.
choosing with keys :
with - button you go down
with +button you select
with power button menu will show
Can someone help me with a link to the stock rom ?
Try SAMmobile.com (you will have to make a free account) when you have made your account click the firmware button at the top of the screen then type in your phone model number. For example SM-G361F the choose your country. Then in the filter box seach your network provider ie. O2 then click download. Once you have downloaded it unzip the file in a folder. Boot your phone into odin/download mode. Click BL or AP it dosent really matter then choose your file and wait for the blue bar on your phone to finish. Then it should restart
And should be stock rom. If your brick your device please note you have full responsibilty over your device. If you do mess up and brick your device just repeat the steps above.
Try resetting the phone from recovery.
Enter into recovery(use possible combinations of power+vol up or power+vol down or power+vol up+vol down) and factory reset the phone. This might help.
danstermadman said:
Try SAMmobile.com (you will have to make a free account) when you have made your account click the firmware button at the top of the screen then type in your phone model number. For example SM-G361F the choose your country. Then in the filter box seach your network provider ie. O2 then click download. Once you have downloaded it unzip the file in a folder. Boot your phone into odin/download mode. Click BL or AP it dosent really matter then choose your file and wait for the blue bar on your phone to finish. Then it should restart
And should be stock rom. If your brick your device please note you have full responsibilty over your device. If you do mess up and brick your device just repeat the steps above.
Click to expand...
Click to collapse
I was asking for a way to download the stock rom for lenovo. now i got both a smartphone and a tablet from lenovo.
edit: when i try to us e the method showed by stevencumps,nothing happen. is there a posibility to flash the rom via stock recovery ?
danstermadman said:
Try SAMmobile.com (you will have to make a free account) when you have made your account click the firmware button at the top of the screen then type in your phone model number. For example SM-G361F the choose your country. Then in the filter box seach your network provider ie. O2 then click download. Once you have downloaded it unzip the file in a folder. Boot your phone into odin/download mode. Click BL or AP it dosent really matter then choose your file and wait for the blue bar on your phone to finish. Then it should restart
And should be stock rom. If your brick your device please note you have full responsibilty over your device. If you do mess up and brick your device just repeat the steps above.
Click to expand...
Click to collapse
That's amusing. they have a lenovo tablet and you're telling them to look for their stock firmware on a site for samsung devices and to restore the device with a program that is made for samsung devices, lol.
Rom original zip for upgrade to lollipop tab 2 a7 10f
honzasasak said:
Hi,
I bought lenovo tab 2 A7-10f for my brothers birthday.
After one week of using it he brought it back to me with words: I broke it.
He rooted (Kingo software) the Android system and than he cleaned some system apps which caused the crash of the system.
Now when I start it the boot stops in lenovo welcome animation and I can't get to boot mode anymore (pushing volume and start button) the system freeze in welcome screen with lenovo and android logo - no martian.
When I tried to connect by ADB the device appeared to be "offline" and I can't reach it.
Can you help me, please?
OS ANDROID 4.4
CPU: MTK 8127 QC 1.3GHZ
Click to expand...
Click to collapse
HERE YOU GO
I am not sure how this works but this is the downloable file any tablet tab 2 A7 10F gets when it's going to upgrade from kitkat 4.4 to lollipop 5.0 so I guess this will work on any of your tablets. This versión is supposed to be for latinamerica but It holds many languagues if any of you need others than Spanish or English.
This is the link, join the lines
just to avoid being banned
h
t
t
p
s
:
/
/
drive.google.com/
file/
d/
0B0M2L15KUCM2OXdITzZ2YWVPWUk/
view?usp=sharing
---------- Post added at 02:36 AM ---------- Previous post was at 02:31 AM ----------
HERE YOU GO
I am not sure how this works but this is the downloable file any tablet tab 2 A7 10F gets when it's going to upgrade from kitkat 4.4 to lollipop 5.0 so I guess this will work on any of your tablets. This versión is supposed to be for latinamerica but It holds many languagues if any of you need others than Spanish or English.
This is the link, join the lines
just to avoid being banned
h
t
t
p
s
:
/
/
drive.google.com/
file/
d/
0B0M2L15KUCM2OXdITzZ2YWVPWUk/
view?usp=sharing
Droidriven said:
That's amusing. they have a lenovo tablet and you're telling them to look for their stock firmware on a site for samsung devices and to restore the device with a program that is made for samsung devices, lol.
Click to expand...
Click to collapse
My twrp is very slow. İs this normal? Bad eng sorry