Related
how to flash huawei C8511 (mts mtag) if I by chance brick it during rooting?
I've tried z4root and the procedures from this forum for my phone MTS Mtag (Re-branded Huawei C8511 - India), but unfortunately it failed. Now I realize that, z4root v 1.3 can not root Android 2.2.2.
Waiting for an update of z4root.
SuperOneClickv2.2-ShortFuse
i tried google "SuperOneClickv2.2-ShortFuse.zip"
& it works & can be unrooted if required
Me too finally rooted my MTS Mtag (Huawei C8511)
Me too finally rooted my MTS Mtag (Huawei C8511) with SuperOneClickv2.3.3 from the Developer Site ShortFuse.Org.
I Followed these steps....
(1) Downloaded the latest version (on 5 May 2012) SuperOneClickv2.3.3 from the developer website ShortFuse.Org
(2) Unzipped the file downloaded in PC
(3) Connected my phone (I've already installed the essential drivers of my phone and using the "Hi Suite"(its a PC Suite) provided by Huawei)
(4) Click on Root button on the application
(5) After few seconds it shows my phone is Rooted. I've restarted my phone, and Now my phone is Rooted.
Simple steps, right???
-
DreamzVp
RE: Flashing Huawei C8511
To answer the original question
Its very easy lol
Download the firmware here - C8511 V100R001C96B638
Then extract to a folder of your choice.
Copy the 'dload' folder to the root of your SD Card.
Turn your phone off completely (I always recommend removing the battery for 30 seconds or so)
Press your volume up and volume down keys and hold, then the power key and hold.
Your phone should display the update screen - see here - Step 8.
Leave it to finish and restart (may restart twice so don't worry lol)
Your phone should now be restored to when you started messing with it
BTW - You will need to re-root and this will delete EVERYTHING so only use if you've bricked it or royally screwed it up
I rooted this phone and removed all carrierware. I am proud to say I am the first guy to modify this phone and start 1x/Evdo on this phone. I somehow cannot make it to remove carrier name. Tried a lots in framework-res.apk but phone firmware is getting crashed and re-install is mandatory. Huawei c8511 is a low activity unrecognized device, we cannot expect anyone to help.
I have searched and found out over 100 custom roms for MTS Mtag-301 (known as Huawei C8500s in China). Was trying hard to flash recovery to swap custom roms. Got a recovery tool which can flash recovery to Huawei C8511 in few seconds. The steps are given below.
1. Download CWM Recovery C8500s 4.0.1.5 (English)
2. Extract the contents to any folder anywhere.
3. Switch off your phone and restart to go to fastboot mode. Press power+volume down keys continously for 10 seconds till the boot logo stays continously.
4. Open the extracted folder and run recovery.bat (batch file), this process will take a max 3 secs and the handset will reboot, let it settle down.
5. Again switch off and press power+volume up keys together and cwm recovery menu should appear.
6. Comming soon.. 2.3.5 and 4.0.3 versions for MTS Mtag 3.1 (Huawei C8511)
http://www.4shared.com/rar/sH3Ar38z/CWM_Recovery_HUAWEI_C8511_c850.html?
Kingroot (Chinese)
The one single rooting application for all Huawei phones and other devices. It is a chinese apk for those who can use it. I take no credits for this.
How did u start 1x/evdo
dr.faramroze said:
i rooted this phone and removed all carrierware. I am proud to say i am the first guy to modify this phone and start 1x/evdo on this phone. I somehow cannot make it to remove carrier name. Tried a lots in framework-res.apk but phone firmware is getting crashed and re-install is mandatory. Huawei c8511 is a low activity unrecognized device, we cannot expect anyone to help.
Click to expand...
Click to collapse
please can u help what did you do to start 1x/evdo i have rooted the phone and installed the recovery
t_avin said:
please can u help what did you do to start 1x/evdo i have rooted the phone and installed the recovery
Click to expand...
Click to collapse
Look for my post on RIMweb forum.
EVOing on Reliance using Tapatalk
Hey how you rooted your phone and done recovery
Sent from my Spice Mi-270 using xda premium
dr.faramroze said:
I rooted this phone and removed all carrierware. I am proud to say I am the first guy to modify this phone and start 1x/Evdo on this phone. I somehow cannot make it to remove carrier name. Tried a lots in framework-res.apk but phone firmware is getting crashed and re-install is mandatory. Huawei c8511 is a low activity unrecognized device, we cannot expect anyone to help.
Click to expand...
Click to collapse
hi
can you tell me are you able to unlock this phone
JohnnyParanoia said:
To answer the original question
Its very easy lol
Download the firmware here - C8511 V100R001C96B638
Then extract to a folder of your choice.
Copy the 'dload' folder to the root of your SD Card.
Turn your phone off completely (I always recommend removing the battery for 30 seconds or so)
Press your volume up and volume down keys and hold, then the power key and hold.
Your phone should display the update screen - see here - Step 8.
Leave it to finish and restart (may restart twice so don't worry lol)
Your phone should now be restored to when you started messing with it
BTW - You will need to re-root and this will delete EVERYTHING so only use if you've bricked it or royally screwed it up
Click to expand...
Click to collapse
link not working… file deleted
New link
abhinav2hd said:
link not working… file deleted
Click to expand...
Click to collapse
C8511 V100R001C96B638
New link.
Unfortunatly Mediafire decided to suspend my account for the n'th time and I decided not to fight them again, so have uploaded most to different hosts.
JP
JohnnyParanoia said:
C8511 V100R001C96B638
New link.
Unfortunatly Mediafire decided to suspend my account for the n'th time and I decided not to fight them again, so have uploaded most to different hosts.
JP
Click to expand...
Click to collapse
thanks for new link
dr.faramroze said:
I have searched and found out over 100 custom roms for MTS Mtag-301 (known as Huawei C8500s in China). Was trying hard to flash recovery to swap custom roms. Got a recovery tool which can flash recovery to Huawei C8511 in few seconds. The steps are given below.
1. Download CWM Recovery C8500s 4.0.1.5 (English)
2. Extract the contents to any folder anywhere.
3. Switch off your phone and restart to go to fastboot mode. Press power+volume down keys continously for 10 seconds till the boot logo stays continously.
4. Open the extracted folder and run recovery.bat (batch file), this process will take a max 3 secs and the handset will reboot, let it settle down.
5. Again switch off and press power+volume up keys together and cwm recovery menu should appear.
6. Comming soon.. 2.3.5 and 4.0.3 versions for MTS Mtag 3.1 (Huawei C8511)
http://www.4shared.com/rar/sH3Ar38z/CWM_Recovery_HUAWEI_C8511_c850.html?
Click to expand...
Click to collapse
thanks very much
update rom can fins here...http://www.needrom.com/download/huawei-c8500-3/
ROM Version: ROM Android 4.0.4
after flashing this rom phone nottt starting....it restart from logo ..............................................
here is full details about custom rom instalation to huawei c8511
http://forum.gsmhosting.com/vbb/f92...-mts-mtag-3-1-custom-rom-cyanogenmod-1914191/
http://forum.gsmhosting.com/vbb/f929/huawei-c8511-c8500s-mts-mtag-3-1-custom-rom-cyanogenmod-1914191/
Hi all,
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
Please help me...
Regards
Hi,
any ideas? I need your help...
I also have such a problem with my PMP5580C DUO.
It just hangs on the Bootscreen with the "The Art Hi-Tech" and the logo.
No chance to get into cwm with power+vol up and even the Hardresetbutton just switches the tablet off.
Can someone help? Or did you find a solution yet?
Thank you very much
W3hrWolf said:
Hi all,
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
Please help me...
Regards
Click to expand...
Click to collapse
Have you tried to put the update.zip file and recovery image on an SD card ?
If not do that then press (Volume +) + (Power) buttons then when the screen flashes stop pressing the (Power) button and keep pressing the (Volume +) button after some time it will start flashing the Tab.
Here is the link if you don't have the update.zip file :
http://www.prestigio.com/catalogue/Archive_products/Multipads/MultiPad_8.0_Pro_Duo#/product-support/firmware
use the 2.0.24 version.
Hope this helps
If not tell me so I can give you another way by using CWM.
Waiting for your reply...
pmp5580c bootloop
Zacktamondo said:
Have you tried to put the update.zip file and recovery image on an SD card ?
If not do that then press (Volume +) + (Power) buttons then when the screen flashes stop pressing the (Power) button and keep pressing the (Volume +) button after some time it will start flashing the Tab.
Here is the link if you don't have the update.zip file :
use the 2.0.24 version.
Hope this helps
If not tell me so I can give you another way by using CWM.
Waiting for your reply...
Click to expand...
Click to collapse
Hi, my friend has the PMP5580c and it too will not go to recovery at all. it just hangs in a boot loop on the start up screen. I have tried the recovery combination, but it does not work. how would I go about flashing the firmware/update.zip file using CWM.
AzahTabor said:
Hi, my friend has the PMP5580c and it too will not go to recovery at all. it just hangs in a boot loop on the start up screen. I have tried the recovery combination, but it does not work. how would I go about flashing the firmware/update.zip file using CWM.
Click to expand...
Click to collapse
Do you have a CWM flashed already or not?
If so then I had this problem before you just need to put the update.zip on the root of the SD card then press the recovery buttons for some time like 2 minutes -some times it takes so long but it works- .
reply to me soon.
Bootloop fixed
Hi Zack.
I was able to get it sorted with fastboot. Needed the laptop to register the m3-chip that it was saying was the tablet. Once that was done, flashed it with the original stock firmware. It now runs like it was brand new.
Thank you all for your time on this matter
AzahTabor said:
Hi Zack.
I was able to get it sorted with fastboot. Needed the laptop to register the m3-chip that it was saying was the tablet. Once that was done, flashed it with the original stock firmware. It now runs like it was brand new.
Thank you all for your time on this matter
Click to expand...
Click to collapse
hi, i have the same fault on the same tablet, how do i fastboot? also when connected to pc it is saying it is a world cup device? thanks in advance
Bricked PMP5580C
Hello
I have bricked my Intenso Tab 814 (same as Prestigio PMP5580C). I formated the bootloader space + the recovery space, and now I can't even turn it on. The backlight of the display isn't glowing up at least. So I used my MicroUSB cable and connected to the computer, it is recognized by the computer, but I can't flash anything back with the amlogic software which I've got, I am really appreciating when someone of you can try to help me out,
thanks in advance,
AMLOGIC
Unbricked Intenso Tab 814
I have successfully unbricked an Intenso Tablet 814 also know as Prestigio PMP5580C! It had no bootloader and all partitions were formatted! This includes the bootloader, means it even showed backlight as I plugged it into the power supply. I got a rescue sd card made with Christian Troys tutorial but my tabket was nit abke to start, because the nand chip was corrupted, so I looked at the nand chip and used a scrwwdriver and put it on the 6 and 5 th point t the right side on the left side is the hole on the nand chip, after that I was able to permitt the access for the nand chip to the mainboard, so it booted from the sd card automaticaly,
Intenso Tab 814 can be unbricked! Yeah, now I need it's source to customize the recovery and boot splash + oneday the os,
Take care!
Bye bye!
Stuck in bootloop intenso tab 724
So the title says it all how can I fix it? No custom recovery only root
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
I have the exact same problem for me too :crying:
maialo said:
I have the exact same problem for me too :crying:
Click to expand...
Click to collapse
same here.
desperately trying to find a solution, but I guess it's totally bricked ...
the ddsetNa
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
jpsollie said:
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
Click to expand...
Click to collapse
in case the 2 people here are still looking 4 the answer:
http://forum.xda-developers.com/showthread.php?t=2412017
get the firmware for your phone (don't know if it's G700-U00 or U10), and flash images back. take out the battery, put the software in download mode for the necessary images (=download to phone), and insert the cable while you 're pushing both volume buttons
Huawei Ascend G700 bootloop
Did n`t work for me. Does someone know serial connecting points for Ascend G700, or has .pdf or picture of electrical schematic?
I think , it may help much!
Thanks for answer anyway.
SAme problem Guys plz help and reply any solution
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same[/QUOTE]
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
I think the program he is refering to is listed on that other thread that he refers to http://forum.xda-developers.com/showthread.php?t=2412017
The program hisuite is mentioned. just google hisuite and you will find the official Huawei website with the program download.
But a "dummies how to guide" could be useful if anyone that have done this themself could take the trouble to make one.
Personally I just have ordered and not received my G700 yet, and found this thread because I was planning to root and put CWM into it when I get it.
But reading this thread makes me a bit worried if its worth the trouble, as it sounds as its a common problem on these phones.
From what I read, rooting is rather safe, but the CWM part may brick the phone, is this correct?
Stuck at boot loop
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
->i used sp flash tool but the software is not detecting my phone even after installing MT65XX VCOM driver
->again the device show up only for couple seconds in fastboot mode like just detected and den removed.
-> tried pressing vol+ key battery removed and den pushing battery but nthng helped.
tried everything but m nt able to read the partition of my device. Plz suggest any alternative to push and replace recovery
Thanks
Cwm g700-u20 v100r001c00b110
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
I too have the same problem
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Any solution yet ??:cyclops:
acacio23 said:
Any solution yet ??:cyclops:
Click to expand...
Click to collapse
nothing yet.
any solution i have the same problem
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
---------- Post added at 02:15 PM ---------- Previous post was at 01:47 PM ----------
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Hi how did you get out of the boot loop i have the same issue
Boot Loop
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
acacio23 said:
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
Click to expand...
Click to collapse
Read this thread, someone else managed to fix their phone with bootloop
http://forum.xda-developers.com/showthread.php?t=2412017&page=9
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
do u got the solution?
Mobile uncle tools problem
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
Hi i faced the same issue , the reason is mobile uncle told dint download the recovery image properly it was of 0 KB and i flashed it and error ..
still awating proper document to recover using sp tool recovery
Hello Everyone!
I am facing a bootloop problem after restoring a complete Nandroid recovery.
1). I created a full backup of my system using "Online Nandroid Backup Pro".
2). I rebooted into the recovery mode using Team Win Recovery (TWRP).
3). I restored the full backup from there.
4). After rebooting into the system, i got stuck with the bootloop problem.
Any suggestions, solutions, or ideas would be greatly appreciated.
Thanks in advance for your time and help!
Get a full Update image of original firmware (UPDATE.APP) 3Go . put it in a folder named : dload on your SD card
press Volume + , Volume - and power at the same time....and thats it
croisade said:
Get a full Update image of original firmware (UPDATE.APP) 3Go . put it in a folder named : dload on your SD card
press Volume + , Volume - and power at the same time....and thats it
Click to expand...
Click to collapse
Thank you very much for your reply.
I have tried your method above just now. I am ending up with the TWRP mode when i click Volume +, Volume -, and power at the same time.
Is there any other way to load the original ROM? Thanks.
Up ! I have also a reboot issue ! how to totally reflash factory the phone ?
Hello Members
I Have Hard Bricked Huawei Y6 Pro [TIT-AL00] "No Recovery" "No Fast Boot Mode" And Mobile Hang On Huawei Logo
Please Help:crying::crying::crying:
You need to give more information so people can help you.
What were you doing just before this happened?
Does it charge when plugged in?
Have you tried to fix it? if so what have you tried?
Anything else that might be relevant!
shakirbaloch said:
Hello Members
I Have Hard Bricked Huawei Y6 Pro [TIT-AL00] "No Recovery" "No Fast Boot Mode" And Mobile Hang On Huawei Logo
Please Help:crying::crying::crying:
Click to expand...
Click to collapse
Hold volume down and power at same time
shanman-2 said:
You need to give more information so people can help you.
What were you doing just before this happened?
Does it charge when plugged in?
Have you tried to fix it? if so what have you tried?
Anything else that might be relevant!
Click to expand...
Click to collapse
tnx for replying
by mistake i wiped system in twrp recovery
i have unlocked bootloader and twrp recovery
by phone will not go to fastboot mode or recovery option
phone only hang on huwei screen
sorry for bad english
shakirbaloch said:
tnx for replying
by mistake i wiped system in twrp recovery
i have unlocked bootloader and twrp recovery
by phone will not go to fastboot mode or recovery option
phone only hang on huwei screen
sorry for bad english
Click to expand...
Click to collapse
Have you got a back-up?
If so press and hold volume up and press start button to got to twrp and restore your backup.
If no back up , download stock firmware from huawei and also download SpFlashTool and you will be able to flash firmware.
shanman-2 said:
Have you got a back-up?
If so press and hold volume up and press start button to got to twrp and restore your backup.
If no back up , download stock firmware from huawei and also download SpFlashTool and you will be able to flash firmware.
Click to expand...
Click to collapse
phone not able to go to recovery and fastboot mode
:crying:
shakirbaloch said:
phone not able to go to recovery and fastboot mode
:crying:
Click to expand...
Click to collapse
Then try the second option. You will have to do a bit of reading but I am pretty sure you will be able to get it going again.
shanman-2 said:
Have you got a back-up?
If so press and hold volume up and press start button to got to twrp and restore your backup.
If no back up , download stock firmware from huawei and also download SpFlashTool and you will be able to flash firmware.
Click to expand...
Click to collapse
I downloaded a stock rom form your huawei link
but it is SD Card update file
its not a sp flash tool file :cyclops:
please give me sp flash tool file link if you can find one
sorry again for my bad english
shakirbaloch said:
I downloaded a stock rom form your huawei link
but it is SD Card update file
its not a sp flash tool file :cyclops:
please give me sp flash tool file link if you can find one
sorry again for my bad english
Click to expand...
Click to collapse
Google is your friend, friend!
http://huawei-firmware.com/rom/huawei-y6-pro/titu02/133
shanman-2 said:
Google is your friend, friend!
http://huawei-firmware.com/rom/huawei-y6-pro/titu02/133
Click to expand...
Click to collapse
thanks but this is also sd card update file link no sp flash tool
It has instructions on how to install update.app firmware, have you tried it?
did you fix your problem .. i have same problem here
above
hello, this works for me everytime . This problem mostily occurs when you wipe or clean a catch memory in huawei TIT-u02 /A00 .
if you can not access the recovery then do the following
1. copy the dload file to you sd card
2.insert the sd card to your phone
3. Press simulitaniousury power+vol up + volume down at once
4.One the phone boots , release only power button while still holding vol up +vol down
5.release vol up +volume down at once when you see android log (installing system update )
Note : the phone will repeat the isntalling system update and errosing more that 6 time . then your phone will restart