Related
Does anyone have any TyTN case suggestions? Something with a low profile so that it doesn't add to the pocket bulk, yet still allows the keyboard to slide out?
phork said:
Does anyone have any TyTN case suggestions? Something with a low profile so that it doesn't add to the pocket bulk, yet still allows the keyboard to slide out?
Click to expand...
Click to collapse
http://www.shieldzone.com/item_description/HTCTYTNF.html
Isn't there something like this out there but that has a belt clip/holster option?
I want something where you can open the keyboard without removing anything, but that you could clip to your belt. Surely I'm not the first...
Dillsnik said:
Isn't there something like this out there but that has a belt clip/holster option?
I want something where you can open the keyboard without removing anything, but that you could clip to your belt. Surely I'm not the first...
Click to expand...
Click to collapse
How about this selection?
http://www.mobilefun.co.uk/cat/TyTN-Cases.htm
failing this I suggest you Google TyTn case
Mike
mikechannon said:
How about this selection?
http://www.mobilefun.co.uk/cat/TyTN-Cases.htm
Click to expand...
Click to collapse
Great link Mike. Any recommendations? I'm looking for a case to fit into a bad/pocket rather than on my belt.
I started with the Shield Zone treatment... full body treatment. The top was fairly unprotected. There was a piece supplied that I believe was supposed to go there, but it didn't fit. Or at least I couldn't figure out how it fit. It's a decent solution for scratching and such, but not total protection. I can also see the edges of the applied material gathering lint, dust, etc. eventually becoming really grimey.
Also, the screen protector from Shield Zone sucks. It's too thick and nearly impossible to get a clear and clean application. It also has too much drag to comfortably use the stylus. Instead, I strongly suggest the Anti-glare from Boxwave instead. Used them on other PDAs and my Treo in the past. Much better quality, easily washable and reusable, very easy on the eyes and still easily usable with a stylus:
http://www.boxwave.com/products/easyfinder/buy-best-htc-tytn-accessories_2076.htm
Earlier this week, this case showed up:
http://pdaden.com/shop/cart.php?target=product&action=view&product_id=18122&substring=tytn
It definitely provides drop/bump/scratch protection. I may rip the flip screen off since I have the Boxwave on it. But overall, it doesn't add too much bulk, makes the phone easier to hold on to and even offers a degree of splash protection. I also don't care for clips, preferring to keep my phone in a front pocket.
This phone is huge! I feel like i'm smuggling a brick when i have it in the pocket. I can't believe there is not a cover out there being made that lets you clip it, but i still haven't found it.
Dillsnik said:
This phone is huge! I feel like i'm smuggling a brick when i have it in the pocket. I can't believe there is not a cover out there being made that lets you clip it, but i still haven't found it.
Click to expand...
Click to collapse
I totally agree - I have not seen a simple belt clip yet so I'm waiting for seidio to make a spring clip swivel holster like i had for the 8125. http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=302
I've emailed Seidio and asked if/when availability for ther 8525 holster is coming and have not heard back yet. Maybe if others email them, they'll hurry the process. I'm sure they were waiting to see how popular the phone is before they commit to making it...
In the meantime, I'm using my old Treo 650 leather case, and it fits perfectly. It's just a bit bulky versus a lower profile clip and holster...
mbn said:
I totally agree - I have not seen a simple belt clip yet so I'm waiting for seidio to make a spring clip swivel holster like i had for the 8125. http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=302
I've emailed Seidio and asked if/when availability for ther 8525 holster is coming and have not heard back yet. Maybe if others email them, they'll hurry the process. I'm sure they were waiting to see how popular the phone is before they commit to making it...
In the meantime, I'm using my old Treo 650 leather case, and it fits perfectly. It's just a bit bulky versus a lower profile clip and holster...
Click to expand...
Click to collapse
Will that one not fit with the Hermes? This is kind of what i am looking for, but not 100%.
sickchilly said:
Earlier this week, this case showed up:
http://pdaden.com/shop/cart.php?targ...substring=tytn
Click to expand...
Click to collapse
This case is the best design i have seen as it is the only one that opens without any removal. You clip on in 2 pieces, 1 on the front and 1 for back. The keyboard will open without having to remove anything, since its 2 seperate pieces.... Now if they could just add a clip to the back of that it is perfect.
Not sure I love the holster idea b/c you still have to unclip it, and i may not want it on the belt all the time. But it may be the best bet out there, that is if its out there!
mbn said:
I totally agree - I have not seen a simple belt clip yet so I'm waiting for seidio to make a spring clip swivel holster like i had for the 8125. http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=302
I've emailed Seidio and asked if/when availability for ther 8525 holster is coming and have not heard back yet. Maybe if others email them, they'll hurry the process. I'm sure they were waiting to see how popular the phone is before they commit to making it...
In the meantime, I'm using my old Treo 650 leather case, and it fits perfectly. It's just a bit bulky versus a lower profile clip and holster...
Click to expand...
Click to collapse
I received this today (12/11) from Seidio tech support:
Thank you for your interest in our products. We are expecting the new holster for Cingular 8525 available in a week later.
Thank You for contacting Seidio
also recommend the shieldzone, they have it for the HERM100 and HERM200 variants
not 100% complete cover, but enough to give you a piece of mind from minor scratches.
DeniaL said:
http://www.shieldzone.com/item_description/HTCTYTNF.html
Click to expand...
Click to collapse
mbn said:
I received this today (12/11) from Seidio tech support:
Thank you for your interest in our products. We are expecting the new holster for Cingular 8525 available in a week later.
Thank You for contacting Seidio
Click to expand...
Click to collapse
Still no Hermes holster on the seido site. I sent them an email two days ago and still have not heard back. My 8525 comes in today and really want to go the holster route..
Anyone have any additional feedback from them??
thanks in advance
-dale
Seidio Holster for 8525
The Seidio holster for the 8525 is in. I ordered one but it has yet to arrive.
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=589
Is there a Rezound belt clip availlable that does not require the phone to be in a case? It would be a bonus for me if the screen faced forward, and so I could use the phone without removing the case.
I am trying to find something similar to the old Droid Incredible belt clip. It was easy to remove the phone from the clip, and while in the clip it could be used normally, and the clip acted as a partial case, and added some depth to the phone so it could be gripped with more confidence. I could even rest it on the clip part so that it acted almost like a 'kickstand'. Finally, the belt clip had a hole in it so that it could be easily slipped onto a peg on my car dashboard mount, making the whole process very simple. Only downside is that this made the clip a little weak and it broke on me a couple of times.
I would very much like to duplicate this experience with the Rezound, so much that I was thinking of trying to get something custom made.
Any tips?
This what I use daily, sorry though it is a face in. It is the only one I ever came across that the phone did not need to be in a case. And it can be used with Std or Exr. batteries.
http://www.ebay.com/itm/3-PACK-Lot-HOLSTER-Swivel-Belt-Clip-Case-for-Verizon-HTC-REZOUND-6425-Plastic-3x-/130702872258?pt=PDA_Accessories&hash=item1e6e7f8ec2#ht_2490wt_1037
Jimi Mack said:
This what I use daily, sorry though it is a face in. It is the only one I ever came across that the phone did not need to be in a case. And it can be used with Std or Exr. batteries.
http://www.ebay.com/itm/3-PACK-Lot-HOLSTER-Swivel-Belt-Clip-Case-for-Verizon-HTC-REZOUND-6425-Plastic-3x-/130702872258?pt=PDA_Accessories&hash=item1e6e7f8ec2#ht_2490wt_1037
Click to expand...
Click to collapse
interesting clip. Any problems with the rezound falling out of it? Might try it.
I did run across that one. It seems to be the least bad of all the ones I've seen, although the construction looks a little cheap from pictures.
Anyone ever consider '3D printing' a custom case/clip?
It is not bad, I have been using it for a few weeks now with no problems. I like that it will take a std or extended battery and work fine.
eh, I understand why they would push belt clip +case. I handle my rez with care, but I'd hate to slide it out of the clip only to drop it because of q quick mishandle/someone bumping into me. Just my .02
Sent from my ADR6425LVW using Tapatalk 2
can that clip holster be used with any case? Looking at the tpu case for the extended battery (cut out).
I would say no... if the edges around the back are extended by a case it would not fit. The Std extended batteries add the bulk in the middle and not at the edges, which then allows it to fit in this holster.
danoldkong said:
Is there a Rezound belt clip availlable that does not require the phone to be in a case? It would be a bonus for me if the screen faced forward, and so I could use the phone without removing the case.
I am trying to find something similar to the old Droid Incredible belt clip. It was easy to remove the phone from the clip, and while in the clip it could be used normally, and the clip acted as a partial case, and added some depth to the phone so it could be gripped with more confidence. I could even rest it on the clip part so that it acted almost like a 'kickstand'. Finally, the belt clip had a hole in it so that it could be easily slipped onto a peg on my car dashboard mount, making the whole process very simple. Only downside is that this made the clip a little weak and it broke on me a couple of times.
I would very much like to duplicate this experience with the Rezound, so much that I was thinking of trying to get something custom made.
Any tips?
Click to expand...
Click to collapse
Man, I have been looking for the exact same thing since November! I built a car holder using a Garmin mount and the belt holster for both my hTC Hero and hTC EVO, and want the same thing for my Rezound! Needs to be face out, though!
Hi Guys
Has any one of you tried this Amzer belt clip case for his/her N3....????
Well I would like to mention one more thing that I have used the case of this manufacturer first time ever...and m really pleased to buy this one....the quality of this belt clip is just awesome....I use it at my work place and even in long daily run too and it really makes me feel worry free regarding my N3.....the toughness of this belt clip is the material of being tested I have checked it with many other belt clip owners and in all the case it did justice with me :good:...so I am really impressed and excited about this product quality and have also dropped a mail to the manufacturers(Amzer) to discuss about the material they have used for creating it....
Is there any one who has tried this one or the similar one...having some great experience.....???
Please do post and share your experience ...
Don't have one for my note 3. This is the first I've seen of it though this is what I've been waiting for.
I've used them on my previous phones, galaxy s4 and droid razr maxx hd. They work well. Have to be careful not to break the clips for the kickstand (they're just two tiny dots).
Fairly sturdy too.
I never used the belt clip though.
kudosmog said:
Don't have one for my note 3. This is the first I've seen of it though this is what I've been waiting for.
I've used them on my previous phones, galaxy s4 and droid razr maxx hd. They work well. Have to be careful not to break the clips for the kickstand (they're just two tiny dots).
Fairly sturdy too.
I never used the belt clip though.
Click to expand...
Click to collapse
Well I have created this thread just to depict its blet clip quality because I have also used this kind of belt clip case on my previous phones but the quality of belt clip was not that much fine enough to go on for a long time...but after using this case I can say the toughness of this belt clip is really the one to be trusted and I have also mentioned in my above post that I am trying to contact the operations person or the CEO as if which product material they are using for the belt clip as it is really tough and strong one....so just waiting for a reply and will surely update you whatever they revert......
I don't have this case but i bought similar ones for my note 2 and note 1 and i only used holster/ belt clip not the case itself because the case doesn't protect the phone that much, the TOP and the Bottom of the phone is not covered so i would use a TPU case with that Holster.
Since i need a belt clip for my phone, i am gonna buy this coz you recommend that it has better belt clip and thats what i need not the case.
mha1021 said:
I don't have this case but i bought similar ones for my note 2 and note 1 and i only used holster/ belt clip not the case itself because the case doesn't protect the phone that much, the TOP and the Bottom of the phone is not covered so i would use a TPU case with that Holster.
Since i need a belt clip for my phone, i am gonna buy this coz you recommend that it has better belt clip and thats what i need not the case.
Click to expand...
Click to collapse
Yes as per my experience and usage I will strongly recommend that belt clip one....as I have also used the many but I find this one much better one.....So I would recommend you to go for it.....:good:
Jimmy2u said:
Hi Guys
Has any one of you tried this Amzer belt clip case for his/her N3....????
Well I would like to mention one more thing that I have used the case of this manufacturer first time ever...and m really pleased to buy this one....the quality of this belt clip is just awesome....I use it at my work place and even in long daily run too and it really makes me feel worry free regarding my N3.....the toughness of this belt clip is the material of being tested I have checked it with many other belt clip owners and in all the case it did justice with me :good:...so I am really impressed and excited about this product quality and have also dropped a mail to the manufacturers(Amzer) to discuss about the material they have used for creating it....
Is there any one who has tried this one or the similar one...having some great experience.....???
Please do post and share your experience ...
Click to expand...
Click to collapse
Can you post pictures of the actual item on your phone? I'd like to see this case and not just the stock website photo. Thanks!
Where to buy...??? Can you please post the link...??? Thank you...
This is the exact one they sell at the Verizon store. They are alright but the top and bottom aren't protected.
Sent from my SM-N900V using Tapatalk
kuroy301 said:
Where to buy...??? Can you please post the link...??? Thank you...
Click to expand...
Click to collapse
Check out their.... it is available for free shipping too.... :good:
http://www.fommy.com/view-full-page...el=Samsung+GALAXY+Note+3+SM-N9005&skuno=96226
Euforeik said:
This is the exact one they sell at the Verizon store. They are alright but the top and bottom aren't protected.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Yes it is the same one....yes its not that much covered from top and bottom as I was looking for a sturdy belt clip case one for me so there it goes much better on comparison to other one available in the market and moreover it does not even hamper the screen on putting it on table from screen side ...not so much pricey even ...so its worth of its cost to go for it on behalf of considering the product quality....
Greets All, I have been doing quite a bit of searches, but I havent been able to find a Phone case I bought of my Honor Note 8, it would fit the Mate 20x, so I am seeing if anyone might have run across anything like this, or if you do if you could let me know. The last time I picked it up from Amazon, but its no longer available. Here is what it looks like:
https://www.amazon.com/gp/product/B01M28CR8C/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
AngelDeath said:
Greets All, I have been doing quite a bit of searches, but I havent been able to find a Phone case I bought of my Honor Note 8, it would fit the Mate 20x, so I am seeing if anyone might have run across anything like this, or if you do if you could let me know. The last time I picked it up from Amazon, but its no longer available. Here is what it looks like:
https://www.amazon.com/gp/product/B01M28CR8C/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I just received this today and it fits perfectly with the Huawei kickstand case. I bought a couple of other cases but this one fits the best so far so those other ones are going back.
https://www.amazon.com/Yuzihan-Holster-iPhone-Defender-Battery/dp/B07FYBZ3RT
Here's more pics
Nice But I am also looking for the swivel clip. I just ordered two from amazon we'll see if they will be big enough. I already have a leather one thats horizontal except the belt clip is a pain to get on my pants. I'll post the ones coming in if they work.
I found a few that I wanted to share with everyone in case anyone is interested:
This Case:
https://www.amazon.com/gp/product/B07HDCTWQ9/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Will work with no case, the clear case Huawei provides, and works with the following case:
https://www.ebay.com/itm/Dooqi-Luxu...var=532520095938&_trksid=p2057872.m2749.l2649
And possibly my guess and slim design case.
https://www.amazon.com/gp/product/B07HCL6M2C/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
This one works without a case or the clear one provided by huawei, will not work with thick or rugged cases.
All of these holsters for the iPhone Xs Max are only 6.5" interior length, but the Mate 20 X is 6.78" long
frcraig said:
All of these holsters for the iPhone Xs Max are only 6.5" interior length, but the Mate 20 X is 6.78" long
Click to expand...
Click to collapse
I understand that, but I bought them and they do work, if you'd like I'll post pics.
thank you for the clarification I wasn't sure if you were simply recommending these after having done some research or whether you had actually tried your phone in some of them. I assume then that the flap has some flexibility to permit the slightly longer length of this phone.
frcraig said:
thank you for the clarification I wasn't sure if you were simply recommending these after having done some research or whether you had actually tried your phone in some of them. I assume then that the flap has some flexibility to permit the slightly longer length of this phone.
Click to expand...
Click to collapse
No Problem, I wouldn't have posted them if I didnt try them. And yes there is a little play with the flap. I do have two more leather horizontal cases that work also, but dont have swivel belt clips and I have for emergencies when the belt clips break on the swivel ones. I'm pretty rough on them.
I just bought this
https://www.tvc-mall.com/details/6-3-6-9-inch-horizontal-style-universal-pu-leather-case-with-belt-clip-for-men-size-17-5-x-8-7-x-1-8cm-sku104800633a.html
And I just bought my Mate 20 X.
All of them should arrive next week. At that point, I'll let you know how everything fits with pictures and words and everything in between (...is there anything in between?).
I found a horizontal leather belt holster in which the Mate 20X fits really well (even with a case on the phone).
Here's my setup.
The kickstand case:
https://www.amazon.com/gp/product/B07KWWMDSK/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
The leather belt holster:
https://www.amazon.com/gp/product/B0727PLG7Q/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
(edited to add one more photo)
Hello,
I just received my Z Flip and after many years with Apple, I felt it is worth trying it out.
However, I am using belt clip holsters for all my previous iPhones and I would need a belt holster for the Z Flip - whether it comes with a clip or a loop.
The products out there are very limited as of now but that will hopefully change soon.
The holster that I found has everything that I want - except the clip or loop.
Doesn't allow me to post the amazon link...its called "www - galaxy z flip case (crocodile pattern)".
Does anyone know a supplier/brand for what I am looking for ?
The option would be to order the one from Amazon but then I have to find a clip/belt loop and a way to attach it.
Thank you very much for your replies.
Greetings, Jurgen
put one on thingiverse
Magicj said:
However, I am using belt clip holsters for all my previous iPhones and I would need a belt holster for the Z Flip - whether it comes with a clip or a loop.
Click to expand...
Click to collapse
This one looks good:
https://www.amazon.com/Nakedcellphone-Rotating-Ratchet-Holster-Samsung/dp/B08CB8RHYG