Related
Hey Guys.
I recently Hard Bricked my Vibrant while flashing a Custom ROM. It won't turn ON at all.
I am shipping the Phone to Samsung Repair Centre in Texas from India.
I had a talk with the Call Centre where they said that I should just give them the piece without the Battery and Battery Pack and they will only repair my piece and will not Replace it anyhow.
I am fine with them just repairing my piece rather than replacing it, but the issue is that I have only Download Mode available on my piece and the Recovery Mode is Factory Disabled.
My Questions are,
1) Whether they will make the Recovery and Download Mode available back on my Vibrant after repairing it ?
2) The phone is very much off the 30 days mark for the Return Policy to work, so is it still their obligation to Replace my piece with a one that has a Recovery and Download Mode enabled on it if the repairing solution doesn't do the trick ?
3) I am shipping the Phone from India so how should I make sure that the Phone that they have Repaired or Replaced with has the Recovery and Download mode working on it ?
4) Also, in my Country we have a Samsung Galaxy S International available, so is the Motherboard of Samsung Vibrant and the International Model similar for the Service Centre over here to repair it ?
Any Help is appreciated.
Thank You.
ech419 said:
Hey Guys.
I recently Hard Bricked my Vibrant while flashing a Custom ROM. It won't turn ON at all.
I am shipping the Phone to Samsung Repair Centre in Texas from India.
I had a talk with the Call Centre where they said that I should just give them the piece without the Battery and Battery Pack and they will only repair my piece and will not Replace it anyhow.
I am fine with them just repairing my piece rather than replacing it, but the issue is that I have only Download Mode available on my piece and the Recovery Mode is Factory Disabled.
My Questions are,
1) Whether they will make the Recovery and Download Mode available back on my Vibrant after repairing it ?
2) The phone is very much off the 30 days mark for the Return Policy to work, so is it still their obligation to Replace my piece with a one that has a Recovery and Download Mode enabled on it if the repairing solution doesn't do the trick ?
3) I am shipping the Phone from India so how should I make sure that the Phone that they have Repaired or Replaced with has the Recovery and Download mode working on it ?
4) Also, in my Country we have a Samsung Galaxy S International available, so is the Motherboard of Samsung Vibrant and the International Model similar for the Service Centre over here to repair it ?
Any Help is appreciated.
Thank You.
Click to expand...
Click to collapse
So you CAN get into download mode with the Android holding a shovel in a big yellow triangle?
Also, did you ever try flashing a custom recovery? ie- clockwork
Sent from my nuclear powered submarine.
ech419 said:
Hey Guys.
I recently Hard Bricked my Vibrant while flashing a Custom ROM. It won't turn ON at all.
I am shipping the Phone to Samsung Repair Centre in Texas from India.
I had a talk with the Call Centre where they said that I should just give them the piece without the Battery and Battery Pack and they will only repair my piece and will not Replace it anyhow.
I am fine with them just repairing my piece rather than replacing it, but the issue is that I have only Download Mode available on my piece and the Recovery Mode is Factory Disabled.
My Questions are,
1) Whether they will make the Recovery and Download Mode available back on my Vibrant after repairing it ?
2) The phone is very much off the 30 days mark for the Return Policy to work, so is it still their obligation to Replace my piece with a one that has a Recovery and Download Mode enabled on it if the repairing solution doesn't do the trick ?
3) I am shipping the Phone from India so how should I make sure that the Phone that they have Repaired or Replaced with has the Recovery and Download mode working on it ?
4) Also, in my Country we have a Samsung Galaxy S International available, so is the Motherboard of Samsung Vibrant and the International Model similar for the Service Centre over here to repair it ?
Any Help is appreciated.
Thank You.
Click to expand...
Click to collapse
So let me get this straight...
I'm assuming u rooted the phone b/c you must in order to even attempt to flash a custom rom...
So you want to send a rooted phone in for repair??
Its very hard to brick the vibrant....u probably have a soft brick....did u try Odin to restore your phone back to stock?? Try that before sending it anywhere
Sent from my XDA app cuz I'm stalking your mom....
Mr. Apocalypse said:
So let me get this straight...
I'm assuming u rooted the phone b/c you must in order to even attempt to flash a custom rom...
So you want to send a rooted phone in for repair??
Its very hard to brick the vibrant....u probably have a soft brick....did u try Odin to restore your phone back to stock?? Try that before sending it anywhere
Sent from my XDA app cuz I'm stalking your mom....[/QUOTE
Sounds to me like he probably doesn't know about odin.
Sent from my nuclear powered submarine.
Click to expand...
Click to collapse
Thanks for Reply.
No, Guys. I know what Odin is.
The phone is Hard Bricked. That means nothing will show up on the screen to do anything at all. It is a well known issue and it is very much possible with your phone too.
From what I have read on the forum, the USB doesn't work due to some bootloader corruption and thus you will not be able to try anything on your phone and Wires need to be physically soldered onto the Motherboard to flash the bootloader and Stock ROM.
I want to enquire about the issue of whether Download and Recovery Mode which comes factory disabled in the newer Vibrants, be enabled by Samsung itself ?
Thanks for your Help.
ech419 said:
Thanks for Reply.
No, Guys. I know what Odin is.
The phone is Hard Bricked. That means nothing will show up on the screen to do anything at all. It is a well known issue and it is very much possible with your phone too.
From what I have read on the forum, the USB doesn't work due to some bootloader corruption and thus you will not be able to try anything on your phone and Wires need to be physically soldered onto the Motherboard to flash the bootloader and Stock ROM.
I want to enquire about the issue of whether Download and Recovery Mode which comes factory disabled in the newer Vibrants, be enabled by Samsung itself ?
Thanks for your Help.
Click to expand...
Click to collapse
Have you heard from Samsung yet as to how much the repair cost will be? I have to send mine there after a Kies update killed by boot loader (the most common reason why a Galaxy S won't show any signs of life and only way to truly brick them). I had a local repair shop jtag it before Kies killed it again, but they couldn't fix the hardware lock.
I got it to a point like that as well. Even when I plugged it in to charge and such, nothing happend. I was still able to ODIN it though. What I had to do was just the battery pull method of putting it into download mode (pull battery, sim and sd cards, open ODIN, connect phone to pc, pop in battery while holding volume buttons) and it worked for me.
Like others say, it's really difficult to hard-brick Vibrants. If either primary or secondary bootloader has been corrupted, you shouldn't have Download mode. Try search more and find out what others did to get out of such situations. You should be able to flash away UNLESS your internal SD card has been fried/messed up. The repair will probably cost you ridiculously large sum of money. Samsung will probably replace internal SD memory (I think it's MoviNAND flash memory module) and flash new firmware. But again it will cost money. I would do everything I can possibly think I can do before sending it off to repair centers.
EDIT: If it is your cellular carrier accepting your phone for examination and think that the cause is hardware malfunction, the carrier will REPLACE your phone. If you are not sending it to your carrier, however, and you are sending it directly to Samsung repair center instead, they will most likely incur repair fees. Not sure 100% but Samsung must be able to tell if you've ever flashed custom firmware and flashing custom kernels and ROMs void manufacturer's 1 year warranty. And this will probably be true unless you flash a stock ROM before shipping it, but this is ironic and according to you doing so is impossible. Try Odin JFD again!
sharkethicx said:
I got it to a point like that as well. Even when I plugged it in to charge and such, nothing happend. I was still able to ODIN it though. What I had to do was just the battery pull method of putting it into download mode (pull battery, sim and sd cards, open ODIN, connect phone to pc, pop in battery while holding volume buttons) and it worked for me.
Click to expand...
Click to collapse
I take it yours wasn't hardware locked then. It's interesting that you were still able to get Odin to recognise the phone when it wasn't showing any sign of life. Were the lights turning on?
jaetm83 said:
Like others say, it's really difficult to hard-brick Vibrants. If either primary or secondary bootloader has been corrupted, you shouldn't have Download mode. Try search more and find out what others did to get out of such situations. You should be able to flash away UNLESS your internal SD card has been fried/messed up. The repair will probably cost you ridiculously large sum of money. Samsung will probably replace internal SD memory (I think it's MoviNAND flash memory module) and flash new firmware. But again it will cost money. I would do everything I can possibly think I can do before sending it off to repair centers.
EDIT: If it is your cellular carrier accepting your phone for examination and think that the cause is hardware malfunction, the carrier will REPLACE your phone. If you are not sending it to your carrier, however, and you are sending it directly to Samsung repair center instead, they will most likely incur repair fees. Not sure 100% but Samsung must be able to tell if you've ever flashed custom firmware and flashing custom kernels and ROMs void manufacturer's 1 year warranty. And this will probably be true unless you flash a stock ROM before shipping it, but this is ironic and according to you doing so is impossible. Try Odin JFD again!
Click to expand...
Click to collapse
I'm trying to find out exactly how much Samsung would charge to repair a screwed up boot loader caused by a Kies update. The device was flashed to stock prior to the update; however, there is a TiBu folder on the internal sd. The Samsung agent I spoke with opened a support ticket and said it would be repaired under warranty as long as nothing was done to the device to void the warranty. I'm trying to decide whether to have it jtagged and still have it hardware locked, or take a chance and send it to Samsung for a proper repair, fixing the hardware lock and boot loader.
I think I've bricked my Galaxy S II.. I got it yesterday and tried to flash 2.3.5. When I was flashing with Odin, the program went unresponsive and crashed. There was nothing else to do but take out the battery.. I shouldn't have done it, but I did. And now it won't turn on at all. I've tried the 3 button method, for download mode, and a jig from my old i9000. Nothing has worked. The screen wont even turn on. I don't know what to do... Help Please??
you need a jtag.If it wont go into download or recovery its gone.
What do you, Jtag? I've got a usb jig, does that work? Or are they the same thing?
*What do you mean
aren't jigs phone-specific?
Any new info on this? Did jtag worked or whatever. I keep eye on this thread but looks like OP disappeared. Genuinely curious what happened with the phone.
Hmm .. very wierd that phone wont turn on ... i have broken Odin flashes purposedly many times myself but always I can get back into it ...
You could try power drain ... remove battery ... press power on button for 10 seconds (WITHOUT BATTERY IN) ... now put battery back in and try to go into Download mode.
Sorry but i got busy with other stuff but wanted to explain to him about the JTag.Its a special box called a RiffBox JTag and what it does is basically wipes the motherboard/bootloader and in most phones repears the bootloader aswell of a fully bricked phone so it can be put into download mode again letting you re-flash via Odin and thus saving your phone.A little miracle that means no more bricked phones.There doesnt seem to be that many around and to buy they aint cheap at all but if you can find a dealer or a phone shop who has one they can do it for you.For example.I bicked my phone and was going to buy the box on ebay.es imported (in spain there isnt any for sale) for 160euros complete or 140 without cables.Searched this site:
http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
and found a shop in Barcelona who did it for me for 35euros plus postage "BARGIN!!!!".If you search youtube and google for RiffboxJtag in your country you should find someone with a unit willing to help out or check the link ive given as it has a list of users worldwide.
EDIT:A jig is not a JTag.A jig will boot your SEMI-BRICKED(phone showing some kind of life ex.classic icon of phone/arrow/computor,menu and back arrow lights work e.t.c.) phone into download mode.A FULLY-BRICKED(dead,no signs of life.wont start.no download,recovery,lights nothing.DEAD!!!) phone needs a JTag
@cooza , Thanks for that explanation and site I even found one near me, that some day might come handy.
I must ask now to further clear my doubts, this riffjtag box, like you said is able to "revive" or "unbrick" _any_ bricked SGS2? No matter how bad is it? Im kinda new around these things and trying to suck up as much info/knowledge possible, before I decide to flash/root/?brick? xD haha ( hope not for last one) my phone.
Devourz said:
@cooza , Thanks for that explanation and site I even found one near me, that some day might come handy.
I must ask now to further clear my doubts, this riffjtag box, like you said is able to "revive" or "unbrick" _any_ bricked SGS2? No matter how bad is it? Im kinda new around these things and trying to suck up as much info/knowledge possible, before I decide to flash/root/?brick? xD haha ( hope not for last one) my phone.
Click to expand...
Click to collapse
Hi.As i said before there are semi and hard bricked phones.A semi bricked phone can normally be booted into download mode with the 3 button combo or a jig and your away again.It has the usuall symbol of a phone and a PC with a warning sign in the middle of them.Hard bricked is when the bootloader is damaged and there is basically no return.You got yourself a very expensive paper-weight for the office desk.Its like trying to turn on your phone with no battery in it.Dead,gone and not coming back.Before the Riffbox the only solution was the rubbish bin or maybe change the motherboard(but a few years ago that was an extremely pricey task if possible).Now we have the box.You can screw you phone to the point of no return and still the box will bring it back to life as it wipes the motherboard and in the case of the SGS2 also repears the damaged bootloader which is what boots your phone to start with.One thing to know,and i dont know if it happens to everyone but mine came back with 2.3.3 installed but there was no recovery mode.If this happens all you have to do is re-flash via Odin a more reciente firmware WITHOUT PIT FILE and yourll get recovery mode back at reboot.Obviously youll need to plug in your phone before hand to re-install the drivers.Same with Odin.boot to download,plug in,installs,unplug,then open Odin and flash.
EDIT:yourve got my name there so if something ever happens and you need a hand to re-flash after a jtag just send me a private message.Here to help.
SamBroomby said:
I think I've bricked my Galaxy S II.. I got it yesterday and tried to flash 2.3.5. When I was flashing with Odin, the program went unresponsive and crashed. There was nothing else to do but take out the battery.. I shouldn't have done it, but I did. And now it won't turn on at all. I've tried the 3 button method, for download mode, and a jig from my old i9000. Nothing has worked. The screen wont even turn on. I don't know what to do... Help Please??
Click to expand...
Click to collapse
im not juding you...but next time is better to flash with CWM.
Odin only for root kernel...
cooza said:
Hi.As i said before there are semi and hard bricked phones.A semi bricked phone can normally be booted into download mode with the 3 button combo or a jig and your away again.It has the usuall symbol of a phone and a PC with a warning sign in the middle of them.Hard bricked is when the bootloader is damaged and there is basically no return.You got yourself a very expensive paper-weight for the office desk.Its like trying to turn on your phone with no battery in it.Dead,gone and not coming back.Before the Riffbox the only solution was the rubbish bin or maybe change the motherboard(but a few years ago that was an extremely pricey task if possible).Now we have the box.You can screw you phone to the point of no return and still the box will bring it back to life as it wipes the motherboard and in the case of the SGS2 also repears the damaged bootloader which is what boots your phone to start with.One thing to know,and i dont know if it happens to everyone but mine came back with 2.3.3 installed but there was no recovery mode.If this happens all you have to do is re-flash via Odin a more reciente firmware WITHOUT PIT FILE and yourll get recovery mode back at reboot.Obviously youll need to plug in your phone before hand to re-install the drivers.Same with Odin.boot to download,plug in,installs,unplug,then open Odin and flash.
EDIT:yourve got my name there so if something ever happens and you need a hand to re-flash after a jtag just send me a private message.Here to help.
Click to expand...
Click to collapse
Thank you mate! I am getting my SGS2 this week so ive been doing alot of reading and research about everything. Thanks for your contribution and kind offer to help if ever comes to that. Very appreciated.
No worries mate.truth is its very hard to fully hard-brick an i9100.The main thing to watch out for,and its a mistake that first-time users/flashers have done,is to flash there i9100 phones with i9000 firmware by mistake.An SGS is not an SGS2 and if they are mixed you WILL hard-brick your device.Here on XDA everything is clearly marked and on their right pages so you cant go wrong if you take your time dont rush-in.But just in case you havnt seen it heres the thread:
Firmwares:
http://forum.xda-developers.com/showthread.php?t=1075278
CF-Root Kernels: (if you feel the need)
http://forum.xda-developers.com/showthread.php?t=1103399
Hi, dont bother faffing with it mate, if you have only had it a day take it back and tell them it wouldnt boot after an automatic Kies update. If they cant turn it on they wont know you bricked it until it gets back to the factory and to be honest after selling 10 million of these babies they wont even bother checking it out, they'll just put it into spares or straight recondition it.
I did the same thing to my xoom, PC world couldnt turn it on so they just gave me another.
hi everybody!
all the steps below were taken from galaxys2root.com as well as the files
i have i9100 with a stock rom 2.3.4 (ki4) (and 1.4gb of free memory-maybe that was the problem).
yesterday i rooted it (everything was fine) and then i installed CWM recovery 4.0.1.4 through odin v1.85 (went fine too) and then on my way to find myself a new rom i decided to backup my current one with cwm. then i entered cwm by pressing vol-down+pwr+home and hit "backup". it backed up the system and then moved on to the data and thats where it got stuck for like an hour.... from the guide i understood that it shouldnt take more than 10 min- 15 min top so i figured that im having a problem, i tuned off the phone by pressing pwr button and turn it back on, then the phone got stuck on the sgs2 screen with the triangle so i turned it off again----> this time it didnt came back on, and not responding to download mode neither to polling battery out or not even by connecting to usb and charger- just dead!
how is it possible? and what should i do to bring it back to life? (and myself)
thank you very much(please help...), and sorry for the long text and the bad english
do you have usb jig with you?
i assume you brick your phone.
read my thread http://forum.xda-developers.com/showthread.php?t=1402286 carefully. anyway, usb jig will not harm your device
No download mode = try jig. Jig doesn't work = JTAG repair by 3rd party repairer (cheaper option) or JTAG repair my Samsung (more expensive option).
thank you,
no dont have one but i ordered from ebay.
is there a chance that my battery died and as a result of the two my phone wont respond?
Possible but highly unlikely. I guess you might as well try a new battery, at worst you'll have a spare when you get the phone repaired.
Fairly common problem go to forum xx download something and follow the instructions dont work go to a totally different forum and ask why ???
CWM 4 very old .
vol-down+pwr+home and hit "backup why ??? thats download mode
My guess would be wrong instructions/firmware .
The other question to ask is it a i9100 or a different version .
jje
i really hope thats the problem, im going to a friend now to try with his battry.
but really how is it possible that my phone is bricked when i didnt even try to flash a new rom, and more than that it happened in the backup process when all the cwm does is a copy operation... so what really had happened?
JJEgan said:
Fairly common problem go to forum xx download something and follow the instructions dont work go to a totally different forum and ask why ???
CWM 4 very old .
vol-down+pwr+home and hit "backup why ??? thats download mode
My guess would be wrong instructions/firmware .
The other question to ask is it a i9100 or a different version .
jje
Click to expand...
Click to collapse
to be honest i was too lazy to search here (which im not going to be now)
thats what he was doing in the video (it did went in cwm)
and my phone is i9100 i bought it in the UK
Wrong firmware faulty firmware wrong instructions any number of things can go wrong with a flash . But it is very odd that it happens in backup recovery yes but backup very rare .
jje
JJEgan said:
Wrong firmware faulty firmware wrong instructions any number of things can go wrong with a flash . But it is very odd that it happens in backup recovery yes but backup very rare .
jje
Click to expand...
Click to collapse
so there is a slight chance that its the battery right?
IIIMJRIII said:
so there is a slight chance that its the battery right?
Click to expand...
Click to collapse
no, there is not.
Sent from my GT-I9100 using xda premium
ok the battery swap doesnt work so its not the problem,
any other ideas??? (except usb jig and jtag)
thanks
Jig <=1% chance of getting you into download mode, JTAG = 100% chance of fixing it. Other options = 0.
MistahBungle said:
Jig <=1% chance of getting you into download mode, JTAG = 100% chance of fixing it. Other options = 0.
Click to expand...
Click to collapse
I should say jog = 50% chances of getting into download mode. JTAG is more like a solution for hard brick(totally unresponsive, bootloader totally mess up, brain system totally corrupted).
Base on my understanding, getting yourself a hard brick is harder than finding a needle in a haystack. If you go through zedomax(galaxys2root.com owner), he mentioned that he flashed all his android device countless time. All he got is just a couple of soft brick. Never a hard brick. Don't waste your money first. Invest on a cheap usb jig which only cost around 2 dollar, compare to JTAG services which cost 50 dollar.
If usb jig doesn't work, try to go for warranty , see whether they charge you or not. If warranty doesn't cover you and cost less than 50 dollar to repair, go for it.
Only go for JTAG if every effort above don't work.
Warning: JTAG is just a service that reinject Samsung firmware into your device. If your phone has hardware failure, I don't think they can help. Unless they provide hardware repair now. If you wanna be sure, email or call them up to see if they provide hardware repair/replace as well, just in case it is a hardware failure cases.
Sent from my GT-I9100 using xda premium
i know its a very rare situation but it happened. I've tried the jig and it didnt work, then i decided to send it back to the store and they told me they have sent it to the manufacturer, now im waiting...
Hey there,
i really read several topics in the xda-developers forum and tried to help myself. Nothing worked so I'm very grateful for any help of you professionals.
I've got an I9100GSMH which was already flashed with Odin and 2.3.6.
Following (stupid) steps I did:
1) tried to flash I9100XXLPQ - seems to be working but the phone got stuck at the bootloader/samsung logo after flashing
2) after that I tried I9100GXXLPN - but this didn't work anyways.
3) i did a Wipe/Factory Reset in recovery mode and deleted the cache. then I tried I9100GXXLPN - no success
4) now I tried to get back to 2.3.6 with I9100GXXLA1 and used a omap4_all PIT file. The repartitioning worked but not the flash. After that I just pulled out the usb plug, which was kinda stupid.
Now the phone stays fully black and doesn't react to any buttons, no Recovery mode, no Download Mode or anything else.
- What can I do to get back into Download mode? Does this USB jig help/work?
- Which Firmware, PIT, Bootloader, etc. would fit for my phone? (Just working - no matter 2.3.6 or 4.0.1)
Thanks for your help. I really appreciate this.
Greetings
Futuretec
If the phone shows no signs of life, only thing you can do is try a jig which realistically probably has 1% chance of getting you into download mode. Actually, I'm being generous. Probably a lot less than that. But worth a try nonetheless.
So that means you can either have it JTAG'd by a 3rd party repairer or send it into Samsung & hope they either can't tell or don't care that's it's been messed with & they repair it under warranty. Best thing to do would be to send it into Samsung/authorised repairer in the first instance, and if they're going to charge you for the repair (don't bother debating this, btw), ask for a quote. That way you can compare their price to fix it with the cost of a JTAG. Here's a JTAG repairer to give you an idea of what you're probably up for (say $100 USD incl postage to/from ?). I'm sure you'll find others with a Google search, maybe even one close to you.
Edit to add -Actually, given you ended up with bootloop after flashing the I9100 rom in the first instance, it probably wasn't that which killed it. More likely pulling the plug.
MistahBungle said:
it probably wasn't that which killed it. More likely pulling the plug.
Click to expand...
Click to collapse
My guess would be his flashing of an OMAP .pit on what seems to be an I9100, rather than I9100G (he said I9100GSMH not I9100GGSMH).
Ahhhh yes. You're right ;-) The fine details.
oinkylicious said:
My guess would be his flashing of an OMAP .pit on what seems to be an I9100, rather than I9100G (he said I9100GSMH not I9100GGSMH).
Click to expand...
Click to collapse
is your phone under warranty
Warranty ain't covering that. Only way you get away with it is if the NAND is so stuffed they can't tell, or if whomever fixes it doesn't care/turns a blind eye.
neerajganga said:
is your phone under warranty
Click to expand...
Click to collapse
MistahBungle said:
Warranty ain't covering that. Only way you get away with it is if the NAND is so stuffed they can't tell, or if whomever fixes it doesn't care/turns a blind eye.
Click to expand...
Click to collapse
if the phone is completely bricked then perhaps we can clain it in warranty
just go to service center and act stupid as if the u never id anythng
i did that when my phone went dead once and ya i got it fixed from them for free under warranty
Hello all,
thanks for your nice respones.
I learned that I have NO G-Version of it.
GT-I9100
Model I9100GSMH
I'm from Germany - anyone now where I can find a professional doing a JTAG "unbrick"? Or do you have other Solutions.
I ordered a USB Jig + Docking station for external battery loader (maybe the battery is low).
Thanks for your help!
futuretec said:
Hello all,
thanks for your nice respones.
I learned that I have NO G-Version of it.
GT-I9100
Model I9100GSMH
I'm from Germany - anyone now where I can find a professional doing a JTAG "unbrick"? Or do you have other Solutions.
I ordered a USB Jig + Docking station for external battery loader (maybe the battery is low).
Thanks for your help!
Click to expand...
Click to collapse
Doubtful the jig will work, and battery low isn't the issue.
As mentioned above by oinkylicious, the issue is you flashed an OMAP .pit file meant for an I9100G to an Exynos I9100 phone.
It was probably recoverable yourself up until you did that.
JTAG or Samsung service is your only option at this point. Google for a mobile phone repair shop near you that has JTAG Riff boxes.
Had about the same issue, Odin was stuck in the middle - pulling the plug here was fatal.
USB jig for SGS2 ICS is different, won't help anyway.
Cost me around $120 for a Jtag treat that fixed the flashed data chip
Model GT-i9100, SSN: i9100GSMH
Reuvenm said:
Had about the same issue, Odin was stuck in the middle - pulling the plug here was fatal.
USB jig for SGS2 ICS is different, won't help anyway.
Cost me around $120 for a Jtag treat that fixed the flashed data chip
Click to expand...
Click to collapse
Hi All,
I have a similar issue. Exactly the same phone. But I don't think I've fully bricked it yet.
Under the battery it says Model: GT-i9100, SSN: i9100GSMH
Originally Gingerbread, then I upgraded to 4.03 via official Kies firmware release.
Couple of days ago tried to upgrade to 4.04 using ODIN and got a fail at factoryfs.img. probably used the wrong firmware.
Could still get into download mode at that stage, but can't anymore. I tried to install a couple of different firmware versions of 4.04. I can still get 'added' when I connect to ODIN though.
Can somebody please help me to upgrade to either 4.04 or Jellybean? I'm willing to go fully custom, just don't know how to do it....Can I do it with ODIN? Do i need a new kernel or pit or image or anything?
Thanks heaps, look forward to any help.
Cheers,
Jackson
Hi all,ok i have had a rooted samsung galaxy s3 i1900 for the last 8 mths and dont no what is going on but last nite it decided to switch itself of and stay stuck on the Samsung logo boot up screen, ive tried all the obvious like a soft/hard reset and taking the battery out and trying to put into recovery mode, but it doesnt want to no , also even when i plug in mains charger im getting no red light to say its charging, so before i take back to vodafone can i just make sure it is bricked and there is nonthing i can do, vodafone said yes they will send of to samsung for repair free of charge as its still under the 12 mth warranty, only reason im posting this is to definately check there is nonthing else i can try with the help from other members on here, many thanks and hope to hear soon from brian..
can you boot it into download mode?
If you can still access recovery then it isn't a dead motherboard, probably the system partition is corrupt which a reflash of the ROM will solve - or go for the warranty repair. The rooting shouldn't invalidate the warranty.
Thankyou
boomboomer said:
If you can still access recovery then it isn't a dead motherboard, probably the system partition is corrupt which a reflash of the ROM will solve - or go for the warranty repair. The rooting shouldn't invalidate the warranty.
Click to expand...
Click to collapse
Hi all and no cant even get into download mode !! looks like a trip back to mobile shop so they can send it of..
that's the only solution