Hi all,
I make this thread to poll how many people have sensors problem with MiniCM7. ( if you have trouble, post a message, because i do a mistake with the poll, and i can t see we have trouble , thanks )
My accelerometer doesn't work
NAA knows this probleme.
NAA have changed the driver of the sensor in the last MiniCM ( 2.1.4,2.1.5,.2.1.6,2.1.7 ) and now my sensor doesn t work. ( and for some other users )
### MiniCM7-2.1.4
* Sensors are now built from source (no compat mode). No sensor delays
* Many CM fixes related to stability, bugs and new features
* Disabled automatic light sensor screen dimming
* Automatic brightness now works (select tickbox from display settings and also allow light decrease from CM Display Settings)
* Liblights fixes
Click to expand...
Click to collapse
I hope NAA is working on this probleme
But you can do that for now :
Open MiniCM 2.1.3 with winrar :
You need : libsensorservice.so ( system => lib ) and sensors.default.so ( system => lib => hw ); sensors.goldfish.so ( system => lib => hw )
Extract this 3 files .
Now, open the new MiniCM ( ex : 2.1.7 the lastest ) with winrar :
-go to system => lib; delete libsensorservice.so and add libsensorservice.so ( that s taken from MiniCM 2.1.3 )
-go to system => lib => hw; delete sensors.goldfish.so and sensors.robyn.so; and add sensors.default.so and sensors.goldfish.so ( that s taken from MiniCM 2.1.3 )
Now, flash your phone with the new MiniCM that is created, and your phone will use the compatibility driver, and your acceleromter must work
TESTED with my phone !
PS: This is my Modify version with compatibility driver
http://depositfiles.com/files/axqjrblfd
Don t forget, for a fresh install : ( you will lose all data )
Flash your phone with the last NAA kernel ( 09 )
Turn on your phone and go to recovery
Wipe data/factor reset
Wipe cache partition
=>advanced , Wipe dalvik cache
Install MiniCM ( modified )
Install gapps
If some people have same problem, and if my modified MiniCM works for other; I will upload the new MiniCM modified.
Just ask, and i will do
Original thread : http://forum.xda-developers.com/showthread.php?t=1456028
http://code.google.com/p/minicm/iss...Milestone Owner Summary&groupby=&sort=&id=347
Sorry for my bad English
Hi,
I ve trouble with my sensor / accelerometer ( again and again ).; he doesn t work
This is my adb logcat and dmesg with MiniCM 2.1.9 + K 11
ADB logcat http://www.mirorii.com/fichier/23/495158/logcat_2-1-9-txt.html
DMESG http://www.mirorii.com/fichier/41/495159/dmesg_minicm_2-1-9-txt.html
And I use MiniCM 2.1.9 with older lib ( from MiniCM 2.1.3, libsensorservice.so ( system/lib ) and sensors.default.so + sensors.goldfish.so ( system/lib/hw ) ) and my sensor / accelerometer works ( in compat mode )
This my adb logcat and dmesg with MiniCM 2.1.9 with old lib + K 11
ADB logcat http://www.mirorii.com/fichier/91/495168/logcat_2-1-9_MOD-txt.html
DMESG http://www.mirorii.com/fichier/40/495172/dmesg_minicm_2-1-9_MOD-txt.html
I hope someone can help me
Some of you don't see it. but there is a clear difference between 2.1 and custom.
small lags for starters.
no filtering secondly.
Also the source SE drops is mostly missing bits.
I'm really not trolling the developer..
To be honest every rom since 2.2.1... has Accl issue's.
Custom kernel or not.
My accelerometer works.. fine.. good enough.
This is my MiniCM7 2.1.9 modify
http://www.mirorii.com/fichier/64/495974/MiniCM7-2-1-9-MOD-zip.html
SpliFFdu95240 said:
This my MiniCM7 2.1.9 modify
http://www.mirorii.com/fichier/64/495974/MiniCM7-2-1-9-MOD-zip.html
Click to expand...
Click to collapse
?? explain.
Is this a mod for the Accelerometer?
SpliFFdu95240 said:
Hi all,
I make this thread to poll how many people have sensors problem with MiniCM7. ( if you have trouble, post a message, because i do a mistake with the poll, and i can t see we have trouble , thanks )
My accelerometer doesn't work
NAA knows this probleme.
NAA have changed the driver of the sensor in the last MiniCM ( 2.1.4,2.1.5,.2.1.6,2.1.7 ) and now my sensor doesn t work. ( and for some other users )
I hope NAA is working on this probleme
But you can do that for now :
Open MiniCM 2.1.3 with winrar :
You need : libsensorservice.so ( system => lib ) and sensors.default.so ( system => lib => hw ); sensors.goldfish.so ( system => lib => hw )
Extract this 3 files .
Now, open the new MiniCM ( ex : 2.1.7 the lastest ) with winrar :
-go to system => lib; delete libsensorservice.so and add libsensorservice.so ( that s taken from MiniCM 2.1.3 )
-go to system => lib => hw; delete sensors.goldfish.so and sensors.robyn.so; and add sensors.default.so and sensors.goldfish.so ( that s taken from MiniCM 2.1.3 )
Now, flash your phone with the new MiniCM that is created, and your phone will use the compatibility driver, and your acceleromter must work
TESTED with my phone !
PS: This is my Modify version with compatibility driver
http://depositfiles.com/files/axqjrblfd
Don t forget, for a fresh install : ( you will lose all data )
Flash your phone with the last NAA kernel ( 09 )
Turn on your phone and go to recovery
Wipe data/factor reset
Wipe cache partition
=>advanced , Wipe dalvik cache
Install MiniCM ( modified )
Install gapps
If some people have same problem, and if my modified MiniCM works for other; I will upload the new MiniCM modified.
Just ask, and i will do
Original thread : http://forum.xda-developers.com/showthread.php?t=1456028
http://code.google.com/p/minicm/iss...Milestone Owner Summary&groupby=&sort=&id=347
Sorry for my bad English
Click to expand...
Click to collapse
Same for 2.1.9
It's going fine in my MiniPro with MiniCM7 2.1.9 and nAa kernel v11.
i have problem with the new sensor drivers too! They were working at the beginig but not now! I have the same problem with ics!
jccz said:
It's going fine in my MiniPro with MiniCM7 2.1.9 and nAa kernel v11.
Click to expand...
Click to collapse
Same here mini pro naa v11 minicm 2.1.9 all sensors working fine
Sent from my U20i using xda premium
stelios97, maybe you can ask to NAA if he can help us ( because your are a Recognized Developer ).
I ve already ask to NAA, but I m not sure he work on it ( because I m the only one who spoke about this problem )
Sorry for my bad English
Accelometer problem
Since minicm 2.1.3 I have the same problem too...Sensors don't respond at all...I had asked nAa but we couldn't find a solution and I thought I was the only one with this problem...
I have no sensors problems at all, sometimes just a little lag
I have that problem too. In alarmdroid, alarm can be stopped via flip or shake - I am used to that and now it doesn't work. App worked in original system, in SonyStyle but when I switched to this, it stopped working.
EDIT: Is there any way, how to use posted fix without system wipe? I just (friday) installed new rom, all apps, and then set them up properly - it took me some time and I don't have much of that right now. I don't really want to wipe again
Tested mine extensively...
1.What is your default cpu settings?
2. Do you have a screen off profile?
I am sorry, I just missed something in app - it works when alarm sounds, but it doesn't work in app, when I try to setup it. I have checked it via some sensor monitor and it works well.
I jumped to conclusion, because previously, it worked in that app even in setup mode and now I presumed, that it doesn't due to system changes.
GonziHere said:
I am sorry, I just missed something in app - it works when alarm sounds, but it doesn't work in app, when I try to setup it. I have checked it via some sensor monitor and it works well.
I jumped to conclusion, because previously, it worked in that app even in setup mode
Click to expand...
Click to collapse
I use Alarmdroid too (and MiniCM 2.2.0), and I have exactly the same issues: sensors don't work in app setup, but they do when an alarm sounds or when testing with other apps.
Sent from my E10i using XDA
I had this problem back in version 2.1.1... the sensors didn't work at all... I put it in the miniCM thread and n4a told me to do a full wipe, which I did, and now everything works like a charm ^^.
Sent from my E10i using xda premium
I have this problem since I flashed cm 10.. I then downgraded to cm7 but the problem persists. Here's the question : can I just replace the files that where posted on the first post without having to flash the rom again? So just replace the files...
Send from beneath my cloak of magic
Related
Hi guys,
as the title says, I managed to port the Hero/Legend/Gratia/Aria ROMs with Sense to our X8.
To install use xRecovery, busybox+xrecovery preinstalled in rom so you can restore backups after.
If upgrading from my previous rom to newer version, do Advanced Restore and restore only /system partition, all your data will be preserved.
These roms REQUIRE latest baseband version xxx15
Take the new baseband and flasher from my server here
or just the firmware if you have the flash tool already, here
Check if u need update by typing "busybox uname -a", u need this (notice date) :
Linux localhost 2.6.29 #1 PREEMPT Fri Dec 17 18:35:45 2010 armv6l GNU/Linux
blagus - thanks a lot !
Thanks go to J&Z and Erasmux!
Enjoy !
Cyanogen CM7 progress can be tracked here
Updated 31-jul-2011 :
2.3.3 GingerBread Sense based on HTC Salsa v0.15
Download : 2.3-Sense0.15
Fixes : Sound, GSM (calls/sms),Sensors (Proximity etc),Bluetooth,some 2d.
Not done : 3d, wifi,3G,vibra
Notes : Latest HTC Sense port is here
Updated 23-July-2011:
CM7 (2.3.4) v.138 HACKDROID
Download : cm7-138
Bugs: Camera,FM
Updated 20-July-2011: updated!
Floyo (2.2.5) v1.0b HACKDROID
Download : Floyo 1.0
Bugs: None, Market crash fixed.
Notes: shares code with FroyoBread-21b; undervolt,pinch-to-zoom,theme chooser,DSP,FM,edgeglow etc.
Themes included : Buuf,NTSense,Arc,GingerSystem,RetroDroid,and more
Updated 7-July-2011:
CM7 (2.3.4) v.122 HACKDROID
Download : cm7-122
Bugs: Camera,FM
New features: Screenshot on power menu, see cm7 changelist.
Updated 16-June-2011 : updated (brightness fix)
2.2.9 CM Floyo v0.30 Really the last one (until the next version)
Download : Floyo v0.30
Working : Everything.This rom is really fast and has no bugs (?)
Based on FroyoBread(0.12)by doixanh (thanks!) + circle battery with %
fixes : sense theme, mpeg4 video-recording,wifi (wpa2+adhoc), some others.
Bugs: autobrightness might be dark, not sure yet why. At least its not completely dark.
Updated 8-June-2011:
CM7 (2.3.4) v.92 HACKDROID
Download : cm7-92
Bugs: Camera (disabled),FM
Updated 06-June-2011 :
Thanks again for all who donated, you have covered my weekend beer expenses
I was asked to do new releases to donators first for testing, and official release once bugs are solved.
This sounds like a good idea, if you have donated to me, you will receive an email with password to access to latest updates once its setup.
I believe this is the only way to both show my appreciation and not impact the rest of community.
Once again, no modaco-style, all roms will be shared with everybody in the end.
Updated 03-June-2011 :
2.2.9 CM Floyo v0.25
Download : Floyo v0.25
Working : Everything.
Based on FroyoBread by doixanh (thanks!)
Updated 1-June-2011:
CM7.0.4 (2.3.4) v.86 HACKDROID
Download : cm7-86
Bugs: Camera (disabled),FM
Fixes : the black themes menu buttons are fixed, updated googleapps, voicerecorder,DSPmanager installed.
And still I prefer to use it with Sense theme, but you can use even Honeycomb theme (preinstalled)
Notes: I am using this as my daily rom, it's stable and reasonably good (no surprises at all).
Updated 29-May-2011 :
2.3.3 GingerBread Sense based on HTC Salsa v0.10
Download : 2.3-Sense0.10
Fixes : Sound, GSM (calls/sms)
Not done : Everything else
Notes : I might need help fixing this one, so all are welcome
Updated 29-May-2011:
CM7.0.4 (2.3.4) v.85a HACKDROID
Download : cm7-85a
Bugs: Camera (disabled),FM
Comes with pinch2zoom and mddi fix modules installed (thanks doixanh)
Updated 06-May-2011 : updated!
2.2.1 CM Floyo v0.20
Download : Floyo v0.20
Working : Everything!
Fixes : cummulative fixes up to 5th may 2011 (everything you need)
No undervolt, no overclock, only stable,very fast and generic-looking rom.
If you are updating X8 for your gf/friend/etc install this, they will be happy and won't bug you much..
if upgrading from older floyo or other cm6 rom, wipe cache(!), but u can keep old data partition.
update: latest google apps(market,maps,talk..), brightness fix, keymap fix.
VGA-video recording fix : here, put it in /system/etc
Updated 4-May-2011 :
2.3.3 GingerBread Sense(RUU_Marvel_HTC_Europe_1.33.401.2) v0.4
Download : 2.3-Sense0.4
Fixes : Sound, GSM (calls/sms),brightness, sensors,gps?
Not done : Everything else
Comment : This is the latest WildfireS build released by HTC, with most software that comes with it ..
Unfortunately we have no more space left in /system for the rest of HTC Apps, I might release them as update.zip for /data partition installation later.
Updated 25-Apr-2011 (Easter present) : updated
CM7 NIGHTLY v.54 HACKDROID (Smooth,Stable)
Download : CM7-54
Bugs: Camera (disabled)
Update : No more "SDcard is safe to be removed" crashes (credits go to NobodyAtall).
Updated 06-Mar-2011 :
2.2.1 CM Floyo v0.15
Download : Floyo v0.15
Working : Almost everything.. (app2sd is fixed native and app2sd+)
Broken : Video (record), FMRadio,ANT+
To enable FMRadio in 0.15, install this update
2.2 Froyo Sense (Legend) v0.5
Download : 2.2-SenseFroyo.0.5
Fixes : GPS,WIFI(!), SD
Not done : GSM,Vibra,Sound..
Leave comments after testing of bugs..
If you like it press "thanks" or buy me a beer!
Updated 02-Feb-2011 :
Some further progress with GSM (data/sms work now, not calls yet)
2.1 Eclair Sense (Legend) v0.5a
Download : 2.1-Sense.0.5a
Broken : GL, Vibra, Calls
Updated 01-Feb-2011 :
2.1 Eclair Sense (Legend) v0.5
Download : 2.1-Sense.0.5
Fixes : Sound,Power,Brightness,Location,GPS,WIFI(!), etc
Not done : GSM,Vibra,GL
And now the great teaser (Quadrant 1000+):
2.2 Froyo Sense + LiveWallpapers (Legend) v0.2
Download : 2.2-Sense-LEGEND
Fixes : Power,some init.rc stuff, complete openGL, etc
Not done : Wifi/GSM ..
And a rather broken still :
2.2 Froyo Sense (Hero) v0.2
Download : 2.2-Sense-HERO
Fixes : Power,some init.rc stuff, complete openGL, etc
Not done : Wifi/GSM ..
2.2.1 CM Froyo "Floyo" (Hero) v0.2
Download : CMFloyo-Hero
Fixes : Power,some init.rc stuff, complete openGL,Sound
Not done : Wifi/GSM,SD,..
2.2.1 AOSP Froyo (Hero) v0.2
Download : TastyFroyo-HERO
Fixes : Power,some init.rc stuff, complete openGL,Sound
Not done : Wifi/GSM,SD,..
--------------------------------------------------------->8----------------------------------------------------------------------
Below are older versions..
2.1 Eclair Tegro (Slide Espresso)
Original post : Tegro for Hero
Download : 2.1-Tegro
Bugs to fix:
Wifi
Bluetooth
GSM
3G
Vibro
SD
GPS
FAQ
1. why I can't move EVERY app to SD with froyo/ginger native app2sd ?!
- there're limitations, read more here
Updated 10-Feb-2011 :
Cookers only
Here is the tool to check library dependencies in roms.
ld-linux
It is arm-compiled, to setup do these steps :
adb push ld-linux /system/bin/
adb shell
chmod 04755 /system/bin/ld-linux
To see library dependencies run ld-linux on any .so file and it will give u the list.
To install your cooked Floyo rom built from sources, put this script update-script
into
/META-INF/com/google/android/ directory inside update.zip, delete both update-binary and updater-script from it and copy to SDcard.
Now use xRecovery to install it normally.
Once installed, and BEFORE REBOOT reinstall xRecovery files into /system/bin/ directory.
You should also extract original boot.img files into /system/bin/ramdisk.tar and install chargemon from one of my Floyo roms.
To enable adb root and debug mode, put property.tar to /system/bin/ - take it from Floyo rom.
Now it should boot.
If you don't see boot animation of Floyo, try replacing /system/lib/libgsl.so
To fix sound, replace libaudio.so
To fix Vibra and Leds : libhardware_legacy.so
make sure these programs start fine before going further :
app_process
mediaserver
surfaceflinger
If one of these 3 fails, it won't boot.
The following are for network and gsm :
ifconfig
netcfg
dhcpcd
rild
wpa_supplicant - make sure if you run it manually, reported interface is wlan0 and not tiwlan0
The fixes required for ramdisk.tar :
init.rc file should have 2 parts from original sony init.rc that are marked as #SEMC
add original init.delta.rc and init.delta.sh from sony or one of my ramdisks, those are responsible for service declarations.
Rom patching modifications :
/system/etc/firmware/ dir
/system/etc/sensors* files
/system/etc/*.sh files
/system/lib/hw/ dir
/system/lib/modules/ dir
Those are probably required for every rom..
anyone tried it?
ps. i have xrecovery in the moment. If I restore this with xrecovery, will I be able to go by to my backup afterwards?
This is not rooted right?
Sent from my E15a using Tapatalk
Is there multi-touch and flash?
i am testing this rom now. no wifi . no network. no gsm/3g. no sdcard support. but over all everything seems to be smooth, i am loving htc ui . touch is working. application is working. widgets are working. dialer is laggy.it is restarting frequently.no camera
is there pinch-to-zoom?
stoyandim said:
is there pinch-to-zoom?
Click to expand...
Click to collapse
no camera. no multitouch or pinch to zoom. must annoying thing is i cant access sdcard. if i can access my sdcard then i can try to change system and try my best and help to solve the problems...
stoyandim said:
anyone tried it?
ps. i have xrecovery in the moment. If I restore this with xrecovery, will I be able to go by to my backup afterwards?
Click to expand...
Click to collapse
yes you make sure make back up of the current firmware and files and you can get to your previous condition if you are worried about bugs by using xrecovery restore feature.
can someone extract sense with widgets in titanium backup??
How i can write this to my x8 ??
zxc79 said:
How i can write this to my x8 ??
Click to expand...
Click to collapse
Put "ChocolateEclair" folder in /sdcard/xRecovery/backup, enter xRecovery, restore backup "ChocolateEclair".
Waiting to be fixed wi-fi,network,restarting,gps,sd and bluetoth.
Finaly one rom for x8.
I just tested it, and it's amazing! Now I understand those people who request HTC Sense for non-HTC phones...
Scroll smoothnes is brilliant! Just like it says "quietly brilliant"
Amazing! Great work
as-mario said:
Waiting to be fixed wi-fi,network,restarting,gps,sd and bluetoth.
Finaly one rom for x8.
Click to expand...
Click to collapse
There is an AOSP Rom in development with more working features than this.
I want this rom because its more nice than aosp
Sent from my E15i using XDA App
gays i have some stubed idia i like to share
may be if we use some system apps from stock room like "sim tool kit and etc "
we can fix the diling broblems
"sorry i have a bad english "
good work racht ,,,,
very very nice,,,,but
its true bugs - really disturbing ...
I expect you can overcome all the bugs,,,
and how we donation
sorry my bad english
how about porting miui
How it's possible to install Hero ROM (custom at all), but doesn't possible to install other Custom ROMs for X8 without cracked bootloader? Is it needed?
XShinyBread CM6 v1 Stable
[ Official Download Links : ]
http://www.4shared.com/get/KvBkbHjh/XShinyBread_CM6_v1-Stable.html
http://www.mediafire.com/?d3t5dhc1c9k5uqj
-
XShinyBread
Android 2.2.1 (FROYO) CM6
Version: 1.0.0 Stable
8.1 MP HD-Ready 720p Camera
Windows Flip Animation
Ubuntu Font Pack
Sense HD Status Bar Icons
(Better quality than GBread ported mpdi icons..)
All is working (Not Camera Zoom and Flash.. !)
Gingerbread 2.3:
- Battery Icon
- Dialer
- User Interface
- Status bar
- Music app
- Keyboard ( Download )
**************************
[ Requirements: ]
1. Baseband
Baseband 2.0.52 (Stable with Fix)
Baseband 2.1.54 (?)
Baseband 2.1.55 (Stable)
Baseband 2.1.58 (Stable)
Baseband 2.1.61 (?)
Baseband 2.1.65 (?)
Baseband 2.1.67 (Stable)
( Baseband Collection )
Baseband version 49/52 ? ( Download Fix )
Install baseband FTF file with FlashTool
2. Kernel
2.6.29 SE (Already included!)
3. Xrecovery 0.3 (ROOT) ( Download )
4. Download 2 files: (Click)
XShinyBread_CM6_v1-Stable.zip
XShinyBread_Mod_v1.zip
[ Install: ]
WE ARE NOT RESPONSABLE IF YOU BREAK YOUR PHONE !
0.1. Xrecovery
1. Factory reset
2. Wipe cache partition
3. Wipe dalvik cache
4. Wipe Battery stats
5. Install custom ZIP ( XShinyBread_CM6_v1-Stable.zip )
5.1 Install baseband fix (Option)
6. Reboot and let the phone alone 5 minutes.
7. Reboot in Xrecovery
8. Install custom ZIP ( XShinyBread_Mod_v1.zip )
9. Reboot in Android
10. Go to : Setting / CyanogenMod Settings / User Interface / Tweaks extras / Select a theme / XShinyBread
10.1. Reboot
[ Apps Included: ]
NEW ANDROID MARKET v2.2.11
ZEAM LAUNCHER
BEAUTIFUL WIDGET LITE
EBUDDY
LED FLASHLIGHT (Use it with your camera)
XDA
BARNACLE WIFI TETHER
UPDATED GOOGLE APPS (06/06/11)
DSP MANAGER
BLADE WIFI FIX
TITANIUM BACKUP
[ APP2SD: ]
Go to: Setting / CyanogenMod Settings / Application Settings /
(Check) Allow application moving
[ Rotary Lockscreen: ]
Go to: Setting / CyanogenMod / Input Settings / Lockscreen Style /
(Choose) Rotary
[ Animation ] On/Off
Go to : Setting / Display / Animation / (Choose)
[ Credits: ]
XDA members: Enolok, Hawkysoft, Zdzihu, Jerpelea, SicNside,
CyanogenMod Team, FreeXperia Team [...]
NO NETWORK ?!
Crash the system server:
Go to Application Dev Tools / Bad Behavior / Crash the system server
-
This ROM is based on my last project: XAT CM6FROYO
(10 000+ downloads)
XShinyBread_CM6_v1.1-Beta_FreeKernel
XShinyBread_CM6_v1.1-Beta_FreeKernel
(BETA Version. Testing purpose only!)
Kernel : v3.47
(Thanks FreeXperia Team)
- FPS caps removed
- Overclocked 1.1 GHz
- Undervolted
- Underclocked 128mhz
- NetFilter/IpTables
- CIFS
Baseband 52 Only !
[ Install ]
0.1. Xrecovery
1. Factory reset
2. Wipe cache partition
3. Wipe dalvik cache
4. Wipe Battery stats
5. Install custom ZIP ( XShinyBread_CM6_v1.1-Beta_FreeKernel )
5.1 Install baseband fix (Option)
6. Reboot and let the phone alone 5 minutes.
7. Reboot in Xrecovery
8. Install custom ZIP ( XShinyBread_Mod_v1.zip )
9. Reboot in Android
10. Go to : Setting / CyanogenMod Settings / User Interface / Tweaks extras / Select a theme / XShinyBread
10.1. Reboot
[ Known bugs: ]
- Unwanted reboot (WLOD)
Report please if you Test and clarify your version, thanks !
-
Release Branch :
1.0.* = Stock Kernel (Stable)
1.1.* = Custom Kernel (Beta)
2.* = CM7 Gingerbread 2.3.* (Alpha)
Will this rom work with .58 baseband?
If it works with .55 then it will most likely work with .58
Other than that sounds good!
Tried to click image on website. No link there.
Mister J said:
If it works with .55 then it will most likely work with .58
Other than that sounds good!
Click to expand...
Click to collapse
For now I will only support for .55 baseband but feel free to test it guys!
Sorry for the download link mediafire is so slow :|
I am on .58. I will check it out on my current BB. If it doesn't work, I will flash .55.
How much time left before uploaded? Just an estimate. I want to try this before I go to bed if possible.
scamp238 said:
How much time left before uploaded? Just an estimate. I want to try this before I go to bed if possible.
Click to expand...
Click to collapse
Yeah ok 2 hours I think and it will be there.
I can't upload the rom on my google site (20MB max.)
Thanks for your support dude !
enolok said:
Yeah ok 2 hours I think and it will be there.
I can't upload the rom on my google site (20MB max.)
Thanks for your support dude !
Click to expand...
Click to collapse
No problem. I want to try something new.
Once this is uploaded, I'm deff gonna use this! Looks great!
I like your cat
freddy009 said:
I like your cat
Click to expand...
Click to collapse
The name of my little cat is Molly !
Thanks to her, I will test our beta camcorder with
how did you get the photo widget to work? can you upload an apk so we can use it on another froyo rom like wolfbreak's??
ABOUT ARC LAUNCHER AND PHOTO WIDGET:
Yeah I know guys, it's a little laggy but so beautiful. After a couple of reboot, it's more flawlessly !!!
Not sure if we will stay with the launcher in rc2.
I'll have to try it in th AM. Thanks for uploading.
performance
Would please share some linpack and/or quad results?
I'm too thinking about trying something new but will only do it if I can get some promising results...
Setting everything again is just too lame...
Seems nice enought, though.
GRATZ
hatanakaf said:
Would please share some linpack and/or quad results?
I'm too thinking about trying something new but will only do it if I can get some promising results...
Setting everything again is just too lame...
Seems nice enought, though.
GRATZ
Click to expand...
Click to collapse
Yes I will but..
I don't think mine will be more up than wolfbreak rom, will see later
Does this have arc keyboard?
Sent from my SAMSUNG-SGH-I897 using Tapatalk
sofia-captivate said:
Does this have arc keyboard?
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
not sure the arc keyboard works in 2.2.
but I use Better Keyboard in market ! Hot n free !
ORIGINALLY POSTED BY doixanh:
It seems that X8 and X10mini use the same touchscreen controller, so this module may work with X10 mini, too!
I'm working with a kernel module to replace SE touchscreen driver to support dualtouch. However, as I found out, it will mostly not be supported by our hardware, because X8 has only 1 sensor and that sensor supports only 1 finger. I don't know whether we can have dual touch if we flash the screen firmware. I will have a look on that.
A temporary solution now is to make a one finger pinch zoom. The idea is that we make Android to think that the second finger is also pressed, by generating second finger events from the driver.
Because I need to modify hw_config.sh and each ROM has a different hw_config.sh, there will be a specific update.zip for each ROM.
Release history
April 13 v004. Rewrite from scratch. Pinch zoom with one or two fingers.
April 03. Source released.
March 26 v003. Specify zoom-in position.
March 25 v002. Zoom-out, rotate. Module size optimization.
March 24 v001. Better finger detection. Reduced zoom-in speed.
March 23 v000. 1 finger pinch zoom-in only
Very Important : How to zoom
For v004
To activate gesture, put your two fingers one-by-one (one finger first, then another after - don't put both at the same time) on the screen, away from each other for at least 1cm. The 2nd finger should have more pressure onto the screen. After putting your 2nd finger on the screen, wait for 0.5s, the gesture will be activated.
After the gesture is activated, you can
- Use your two pressed fingers, or
- Lift up one finger and use the remaining finger
to zoom-in/out/rotate.
I prefer keeping two fingers on the screen, because it's natural for pinch zoom. You can look at the tutorial for v004 here, and practice with MultiTouch Visualizer 2.
For v003 and below
Right now it supports only zoom-in, zoom-out, and rotate. I will improve it over time. For who says it's not working, please read this how-to very carefully:
- To activate gesture : Put two fingers near each other, lift one finger up.
- To zoom-in (make things bigger): Activate gesture near the center of the screen. Move your remaining finger away from the gesture position to zoom-in.
- [new in v003] To zoom-in with specified zoom-in position: Do a normal touch to the zoom-in position (your face in an image, for example), then activate the gesture a little bit away from the zoom-in position shortly after the previous normal touch, then drag to zoom. I know, it's a little bit hard to understand ~.~ I will make a short clip for the tutorial
- To zoom-out (make things smaller): Activate gesture at the corner or the side of the screen. Move your remaining finger toward the screen center to zoom-out.
- To rotate : Activate gesture at the corner or the side of the screen. Move your remaining finger around the screen center to rotate.
Practice your 1 finger pinch zoom with MultiTouch Visualizer 2. Tutorial for zoom in, zoom out, and rotate can be watched here
Requirements
- Rooted
- xRecovery (for update.zip installation)
For people who have previous x8gesture.ko and want to only update to new one without any other changes use the attached x8gesture_v004_update.zip to flash with xRecovery. Then edit hw_config.sh and add following code at top:
Code:
#dx: our modded touchscreen driver
insmod /system/lib/modules/x8gesture.ko
[IMG]http://tapa.tk/mu/7560d9ef-d470-2e3d.jpg[/IMG] [IMG]http://tapa.tk/mu/7560d9ef-d484-c533.jpg[/IMG]
Hope it helps.[/U][/B][/SIZE][/COLOR]
[SIZE="4"][COLOR="DarkOrchid"][B][U]Instruction for manual installation:[/U][/B][/COLOR]
- Remount /system as rw
- Copy the attached x8gesture.ko below to /system/lib/modules
- Change hw_config.sh in your /system/etc, add this code at the beginning
Code:
# dx: our modded touchscreen driver
insmod /system/lib/modules/x8gesture.ko
- Push modified hw_config.sh back to your phone, reboot[/SIZE]
[B][U][COLOR="Blue"]Instruction for installation with update.zip:[/COLOR][/U][/B]
- [B][U][SIZE="4"][/SIZE][/U][/B]: These update.zip will disable X8Overclock if it's enabled on your system. It's much better if you do the manual installation above.
- Download update.zip accImportant ording to your current ROM
- Reboot and flash with xRecovery
- Report bugs
[B][COLOR="DarkOrchid"]List of update.zip[/COLOR][/B]
[B][COLOR="DarkOrchid"]v004 releases[/COLOR][/B]
- For Stock SE 2.0.1.A.0.47 : update-2.0.1.A.0.47-2011-04-13-signed.zip (9.69 KB) [url]http://www.multiupload.com/JQIPMR4FS5[/url]
- For Stock SE 2.1.1.A.0.6 : update-2.1.1.A.0.6-2011-04-13-signed.zip (9.45 KB) [url]http://www.multiupload.com/EJPLJL0NEY[/url]
- For racht's CM7-J005 HACKDROID : pdate-cm7j005hackdroid-2011-04-13-signed.zip (9.98 KB) [url]http://www.multiupload.com/EMU5K5ZYNF[/url]
- For jerpelea's CM7-006a : update-cm7j006a-2011-04-13-signed.zip (9.61 KB) [url]http://www.multiupload.com/4KER24ZCXX[/url]
- For racht's HACKDROID 0.15 : update-floyo15-2011-04-13-signed.zip (9.69 KB) [url]http://www.multiupload.com/PS9UPCX46B[/url]
- For nobodyAtall's MiniCM beta 2 : update-minicm2-2011-04-13-signed.zip (9.44 KB) [url]http://www.multiupload.com/LHT0RC4F4M[/url]
[B]v003 releases[/B]
- For Stock SE 2.0.1.A.0.47 : update-2.0.1.A.0.47-2011-03-26-rel-signed.zip (9.71 KB) [url]http://www.multiupload.com/USKMD30N67[/url]
- For Stock SE 2.1.1.A.0.6 : update-2.1.1.A.0.6-2011-03-26-rel-signed.zip (9.47 KB) [url]http://www.multiupload.com/CL2SH8FJGK[/url]
- For racht's CM7-J005 HACKDROID : update-cm7j005hackdroid-2011-03-26-rel-signed.zip (10 KB) [url]http://www.multiupload.com/1X0IWZKRN6[/url]
- For jerpelea's CM7-006a : update-cm7j006a-2011-03-26-rel-signed.zip (9.63 KB) [url]http://www.multiupload.com/6N2HAGE9OC[/url]
- For racht's CM7-1.0 RC1 : update-cm7r1.0rc1-2011-03-26-rel-signed.zip (9.62 KB) [url]http://www.multiupload.com/PMN0H2LB52[/url]
- For racht's HACKDROID 0.15 : update-floyo15-2011-03-26-rel-signed.zip (9.71 KB) [url]http://www.multiupload.com/UJK029BLIX[/url]
- For nobodyAtall's MiniCM beta 2 : update-minicm2-2011-03-26-rel-signed.zip (9.47 KB) [url]http://www.multiupload.com/Z7XKFKP3A5[/url]
For other ROMs, please upload your /system/etc/hw_config.sh so I can customize your ROM's hw_config to load the kernel module
[B][U]Troubleshoot[/U][/B]
Q. Help! It doesn't work!
A. Try this command from your PC shell
[CODE]
adb shell
dmesg | grep X8Gesture
If there is some output, that means the module is loaded. You need to practice first.
Q. Help! I did as above, but nothing was output
A. Check your hw_config.sh or your ramdisk to be sure that it's loaded during boot
Q. Help! dmesg above output something, but it doesn't work!
A. Maybe you're trying to load it in X10 Mini Pro or other devices? It supports only X8 and X10 mini.
Give it a try.
If u like my post, thank me!!
Yep works on MiniCM, althrough..I think most of the packages won't suit to our x10mini(I mean official firmware ones)
omg is working!!!!!! But it wants callibration. I downloaded a multitouch tester from the market and it found 2 touch points.
sorry for my bad english!!
Works well on MiniCM-Beta2 !
Tested in Google Maps, Web Browser, and checked with Multitouch Tester.
thank you so much. Works perfect in my x10 mini SE 2.1.1.A.0.6.
Works Great ! on E10i 2.1.1.A.0.6
it can be zoom in Angrybird?
make one for cyanogen6 v3.4?
nakato124 said:
Works Great ! on E10i 2.1.1.A.0.6
it can be zoom in Angrybird?
Click to expand...
Click to collapse
Here it works.
It's good and it's a good start !!
Works on cm7!
congratulation!
great job,will try this out later on this evening!
Keep it up.
Best wishes.
Its really awesome aint it guys! Yup it requires calibration though.....but otherwise, its the next best alternative to the pinch-zoom for X10!!
guys because i don't have the x10 mini yet (in 2 days i will buy it)i cant test this one question:it makes the x10 mini recognise 2 fingers? or something like emulate the second finger?
I need a help from you X10mini guys: can somebody do a fresh restart and paste the content of dmesg on your X10mini? I don't have an X10mini but I want to see your dmesg info.
Thanks.
Sora94 said:
guys because i don't have the x10 mini yet (in 2 days i will buy it)i cant test this one question:it makes the x10 mini recognise 2 fingers? or something like emulate the second finger?
Click to expand...
Click to collapse
Hey its just a 1-pinch zoom (read how it works in the main thread). And i suggest u dont buy the mini! No offence....SE have quit on it and wont provide any new updates on it!
doixanh said:
I need a help from you X10mini guys: can somebody do a fresh restart and paste the content of dmesg on your X10mini? I don't have an X10mini but I want to see your dmesg info.
Thanks.
Click to expand...
Click to collapse
Alrite mann! I'll let u no ASAP. Thanks for the work. Am out rite now, will post as soon as i come back.
Regards,
death214
doixanh said:
I need a help from you X10mini guys: can somebody do a fresh restart and paste the content of dmesg on your X10mini? I don't have an X10mini but I want to see your dmesg info.
Thanks.
Click to expand...
Click to collapse
1 q....how do i see the dmesg info?
death214 said:
1 q....how do i see the dmesg info?
Click to expand...
Click to collapse
I think you can see in adb logcat but i don't know what is fresh restart.
Sorry for my english
Sent from my X10mini using XDA Premium App
Here is the dmesg info from my mini.
nice work dude
Thanks for uploading the dmesg @nishan.
Hello everebody!
My name is Walace and I'm from Brazil.
So, I've a SE x10 mini with kernel 2.6.29.6-nAa-06 and MiniCM7-2.1.4 and I don't no what happened, the accelerometer doesn't work anymore.
Please help me!
thanks.
Walace
walace.elias said:
Hello everebody!
My name is Walace and I'm from Brazil.
So, I've a SE x10 mini with kernel 2.6.29.6-nAa-06 and MiniCM7-2.1.4 and I don't no what happened, the accelerometer doesn't work anymore.
Please help me!
thanks.
Walace
Click to expand...
Click to collapse
first of all make a backup and wipe your phone and then install an up to date kernel as well as rom, i think this might solve the problem.
My accelerometer doesn't work too
NAA knows this probleme.
NAA have changed the driver of the sensor in the last MiniCM ( 2.1.4,2.1.5,.2.1.6,2.1.7 ) and now my sensor doesn t work. ( and for some other users )
### MiniCM7-2.1.4
* Sensors are now built from source (no compat mode). No sensor delays
* Many CM fixes related to stability, bugs and new features
* Disabled automatic light sensor screen dimming
* Automatic brightness now works (select tickbox from display settings and also allow light decrease from CM Display Settings)
* Liblights fixes
Click to expand...
Click to collapse
I hope NAA is working on this probleme
But you can do that for now :
Open MiniCM 2.1.3 with winrar :
You need : libsensorservice.so ( system => lib ) and sensors.default.so ( system => lib => hw ); sensors.goldfish.so ( system => lib => hw )
Extract this 3 files .
Now, open the new MiniCM ( ex : 2.1.7 the lastest ) with winrar :
-go to system => lib; delete libsensorservice.so and add libsensorservice.so ( that s taken from MiniCM 2.1.3 )
-go to system => lib => hw; delete sensors.goldfish.so and sensors.robyn.so; and add sensors.default.so and sensors.goldfish.so ( that s taken from MiniCM 2.1.3 )
Now, flash your phone with the new MiniCM that is created, and your phone will use the compatibility driver, and your acceleromter must work
TESTED with my phone !
PS: Sorry for my bad english
Well,
s0ftcorn I tried what you said but doesn't work. So, I did what SpliFFdu95240 and doesn't work too!
I installed the ROM MiniCm7 2.1.3 and now my cell is working very well.
I'll wait a new ROM until the problem will be solved.
Thank's
You must do a mistake; if I can ( but mu is dead ), I will try to upload my version of MiniCM
EDIT: This is my Modify version with compatibility driver
http://depositfiles.com/files/axqjrblfd
Don t forget, for a fresh install : ( you will lose all data )
Flash your phone with the last NAA kernel ( 09 )
Turn on your phone and go to recovery
Wipe data/factor reset
Wipe cache partition
=>advanced , Wipe dalvik cache
Install MiniCM ( modified )
Install gapps
Sorry for double post !
I make a new thread with poll, please go here http://forum.xda-developers.com/showthread.php?t=1477205
Any chance to use it on other ROMs or at least.. Is it possible to port same script from other ROM to second ROM (like StornMix which has accelerometer sensor problem)?
I don t know, ask to the autor of the ROM.
It s NAA who said to me to do that, so I don t know, sorry
IMPORTANT ANNOUNCEMENT ON AT POST #807 PLEASE READ http://forum.xda-developers.com/showpost.php?p=24178405&postcount=807
MooDeD ICS ROM v.2.0 [ROM]
-==-Best ROM And HD-Games Working HIT THANKS -==-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New Version:
If U Experience Battery Drain On my ROM remove the torch and brightness control On The QuickPanel Settings ..
HYDr^0G3N TeaM HIRING [ Click Here To Join Please ]
MooDeD ICS Version 2.0 FULL VERSION | xTreme Stable | Full Version With ICS Apps. [Link Working ] Updated ROM at [24/12]
MooDeD ICS 30.5 RC2 + Xperia S UI Fixed + More... Please DONATE For A Little Help Guys.. Thanks.
For Neo V Users Here Is The Patch Enjoy Thanks to Wilsonchuchu
Xperia Neo V Patch + HotFix
Flash This Also For GPU Driver Of ICS [MooDeD ICS] ~ Hope U Donate.. .. Buying Xperia S | Enhanced 2D & 3D Experience..
MooDeD ICS GPU Driver For ARC
Press thanks when you download, just once, if every person that have downloaded MooDeD ROMs since the start had pressed the thanks button I would have more than 50000 Thanks , and if every person that have downloaded MooDeD ROM since the start, had donated well you know the sentence, I would be really rich , so please
Installation Instructions :
Transfer the zip file you downloaded above to your internal sdcard (not the external micro SD).
Turn off the phone, then boot into recovery mode. For this, press and hold Menu Button Until CWM screen shows up: Volume Button.
Phone will boot into CWM recovery. Use volume keys to scroll up and down between options and power/home key to select an option.
Perform a wipe:
Select “wipe data/factory reset”. Then select “Yes” on next screen to confirm. (This will not touch your SD cards so don’t worry).
Go to “advanced” and then select “wipe dalvik cache”, then select “Yes” on next screen. Now, go back to main screen of recovery.
Select “mounts and storage”, then select “format system”. Select “Yes” on next screen to confirm. Go back to main recovery menu after system format is complete.
Then, select “install zip from sdcard”, then select “choose zip from sdcard”. Then, browse to the file you transferred to the sdcard in step 2 and select it.
Confirm installation on the next screen by selecting the option ”Yes — Install MooDeD ICS.zip“. The ROM will now start installing.
After installation is complete, select “go back” then select “reboot system now” to reboot the phone.
Click to expand...
Click to collapse
Why To Choose My ROM?
Cause This ROM Is The Fastest And Light No-Redraws 96% And 100% Daily Update
Click to expand...
Click to collapse
FAQ :
Q: I can't find my ext sdcard!
A: using file manager go to /emmc
Q: I can't record videos!
A: no kernel sources
Q: when I connect the phone to PC I cannot mount my sdcard!
A: no kernel sources
Q: I Have A Lag Or The ROM Is Slow ...
A: Just Request to me Remove Application So Some Bloatware Will Be Remove
Q: gallery is too slow!
A: give it some time to scan or download quikpic free from market
Q: I have too many force closes and bugs not found on this thread!
A: relate to installation instruction in OP
Click to expand...
Click to collapse
About the ROM :
Base : 4.0.3 ICS : FULL ICS BASE FROM SOURCE ICS BETA Kanged from their repos by Sony ( Thanks To HIM .)
What can you expect? Well, Basically the sames bugs as CM9, and the Full ICS user experience, with all their awesome mods.
It's has been tested by my Recognized Tester (Duvel999 Etc.... !)
It's Rockstable, nothing more nothing less. It's Blazing fast.
It contains Light Gapps. If you're missing some apps that are related to Google, go on and flash latest ICS Gapps. It has now the ICS Settings, from CM9 !
'Bout the recovery. Stock, not touch. Some users don't understand how it works, and freak out because they can't use it or restore their beloved Sony ROMs() , so it's stock.
Click to expand...
Click to collapse
Next Update Day:
Version 40.0 =- March 31, 2012
Version 40.5 =- April 04, 2012
Version 50.0 =- April 10-15, 2012 [ Official ICS ROM ]
Click to expand...
Click to collapse
Miscellaneous Area:
Working HD Games:
Tested and working:
- 9MM HD
- Asphalt 5
- Asphalt 6 HD
- BackStab HD
- GT Racing HD
- Real Football 2011 HD
- Shrek Karting HD
- UNO HD
- Dead Space
- Reckless Racing 2
- Modern Combat 3
- World of Goo
- Let's Golf 1
- GSM => working
- 3G/DATA => working
- SMS => working
- SENSORS => working
- USB Connection => working (MTP mode)
- AUDIO => working
- VIDEO => working
- VIBRATION => working
- MIC => bug with Recorder app
- GPS => working
- ANT+ => working
- Bluetooth => working
- WIFI => working
- camera => working
- camcorder => working
- flashlight => working
- USB tethering => working
- USB Mount in Recovery ==> working
Fixes And HotFix Download Area:
Fixes :
HTK / BullerProoF SuperCharge Service V6 Download:
HTK / BulletProoF Service
WiFi Fix Download:
WiFi Fix For 3.0
SuperUser Fix Download :
Super User Fix
SuperCharge V6 RC.9 For ICS Download :
SuperCharge V6 [See XDA Forums]
Addons :
AOSP LockScreen:
Still Making It..
SuperSU : Download Link :
SuperSU [ Ill Integrate Later With My ROM ]
Facebook Inside Xperia : Download Link:
Facebook Inside Xperia v.1.0
Google Apps : Download Link:
Google Apps
SEMC Mail : Download Link:
SEMC Mail
LiveWallpapers : Download Link
LiveWallpapers
Radio : Download Link:
Radio
Widget : Download Link:
Widget
Report If Error 6 [ Script Error ] Happens Cause I Am Not Using ICS Im In GB...
Themes : Cheers Coming Soon..
Screenshots:
ChangeLog's Area:
ChangeLog v2.0 NEO
HTK Tweak For More Smooth Transition ~ Best If OverClocked
BootLoop Fix
Fixed Xperia S UI
BuG Fix Of Framework
Build.prop Updated Name
New Music Player
New Call UI
Reboot Option..
Revamped UI
Fixed Update-Script
New Toggle Buttons
NEO UI Tweak [ Kinda xD ] Only For NEO I Have NEO ROM To.. ..
By: ChaosFirZen XDA
Special Thanks To:
StockDroid ~ For HSDPA Limiting category
XtremePeople ~ For All In One Tweak
cobrato ~ For ICS Stock Kernel And USB Fixes
krabappel2548 ~ For UI And Many More Thank Yo HIM...
WasabiWa83 ~ For Making Poster He Is The Best Poster Maker.. [2012]
DooMLord ~ For Many Things Like Kernel And WiFi Modules
TheFrankenstain ~ For PowerSave,System Tweak And Other =)
If You Want To Support Me Here Is The Banner / Poster:
IMPORTANT ANNOUNCEMENT ON AT POST #807 PLEASE READ http://forum.xda-developers.com/showpost.php?p=24178405&postcount=807
MooDeD ICS ROM v.2.0 [ROM]
-==-Best ROM And HD-Games Working HIT THANKS -==-
New Version:
If U Experience Battery Drain On my ROM remove the torch and brightness control On The QuickPanel Settings ..
HYDr^0G3N TeaM HIRING [ Click Here To Join Please ]
MooDeD ICS Version 2.0 FULL VERSION | xTreme Stable | Full Version With ICS Apps. [Link Working ] Updated ROM at [24/12]
MooDeD ICS 30.5 RC2 + Xperia S UI Fixed + More... Please DONATE For A Little Help Guys.. Thanks.
For Neo V Users Here Is The Patch Enjoy Thanks to Wilsonchuchu
Xperia Neo V Patch + HotFix
Flash This Also For GPU Driver Of ICS [MooDeD ICS] ~ Hope U Donate.. .. Buying Xperia S | Enhanced 2D & 3D Experience..
MooDeD ICS GPU Driver For ARC
Press thanks when you download, just once, if every person that have downloaded MooDeD ROMs since the start had pressed the thanks button I would have more than 50000 Thanks , and if every person that have downloaded MooDeD ROM since the start, had donated well you know the sentence, I would be really rich , so please
Installation Instructions :
Transfer the zip file you downloaded above to your internal sdcard (not the external micro SD).
Turn off the phone, then boot into recovery mode. For this, press and hold Menu Button Until CWM screen shows up: Volume Button.
Phone will boot into CWM recovery. Use volume keys to scroll up and down between options and power/home key to select an option.
Perform a wipe:
Select “wipe data/factory reset”. Then select “Yes” on next screen to confirm. (This will not touch your SD cards so don’t worry).
Go to “advanced” and then select “wipe dalvik cache”, then select “Yes” on next screen. Now, go back to main screen of recovery.
Select “mounts and storage”, then select “format system”. Select “Yes” on next screen to confirm. Go back to main recovery menu after system format is complete.
Then, select “install zip from sdcard”, then select “choose zip from sdcard”. Then, browse to the file you transferred to the sdcard in step 2 and select it.
Confirm installation on the next screen by selecting the option ”Yes — Install MooDeD ICS.zip“. The ROM will now start installing.
After installation is complete, select “go back” then select “reboot system now” to reboot the phone.
Click to expand...
Click to collapse
Why To Choose My ROM?
Cause This ROM Is The Fastest And Light No-Redraws 96% And 100% Daily Update
Click to expand...
Click to collapse
FAQ :
Q: I can't find my ext sdcard!
A: using file manager go to /emmc
Q: I can't record videos!
A: no kernel sources
Q: when I connect the phone to PC I cannot mount my sdcard!
A: no kernel sources
Q: I Have A Lag Or The ROM Is Slow ...
A: Just Request to me Remove Application So Some Bloatware Will Be Remove
Q: gallery is too slow!
A: give it some time to scan or download quikpic free from market
Q: I have too many force closes and bugs not found on this thread!
A: relate to installation instruction in OP
Click to expand...
Click to collapse
About the ROM :
Base : 4.0.3 ICS : FULL ICS BASE FROM SOURCE ICS BETA Kanged from their repos by Sony ( Thanks To HIM .)
What can you expect? Well, Basically the sames bugs as CM9, and the Full ICS user experience, with all their awesome mods.
It's has been tested by my Recognized Tester (Duvel999 Etc.... !)
It's Rockstable, nothing more nothing less. It's Blazing fast.
It contains Light Gapps. If you're missing some apps that are related to Google, go on and flash latest ICS Gapps. It has now the ICS Settings, from CM9 !
'Bout the recovery. Stock, not touch. Some users don't understand how it works, and freak out because they can't use it or restore their beloved Sony ROMs() , so it's stock.
Click to expand...
Click to collapse
Next Update Day:
Version 40.0 =- March 31, 2012
Version 40.5 =- April 04, 2012
Version 50.0 =- April 10-15, 2012 [ Official ICS ROM ]
Click to expand...
Click to collapse
Miscellaneous Area:
Working HD Games:
Tested and working:
- 9MM HD
- Asphalt 5
- Asphalt 6 HD
- BackStab HD
- GT Racing HD
- Real Football 2011 HD
- Shrek Karting HD
- UNO HD
- Dead Space
- Reckless Racing 2
- Modern Combat 3
- World of Goo
- Let's Golf 1
- GSM => working
- 3G/DATA => working
- SMS => working
- SENSORS => working
- USB Connection => working (MTP mode)
- AUDIO => working
- VIDEO => working
- VIBRATION => working
- MIC => bug with Recorder app
- GPS => working
- ANT+ => working
- Bluetooth => working
- WIFI => working
- camera => working
- camcorder => working
- flashlight => working
- USB tethering => working
- USB Mount in Recovery ==> working
Fixes And HotFix Download Area:
Fixes :
HTK / BullerProoF SuperCharge Service V6 Download:
HTK / BulletProoF Service
WiFi Fix Download:
WiFi Fix For 3.0
SuperUser Fix Download :
Super User Fix
SuperCharge V6 RC.9 For ICS Download :
SuperCharge V6 [See XDA Forums]
Addons :
AOSP LockScreen:
Still Making It..
SuperSU : Download Link :
SuperSU [ Ill Integrate Later With My ROM ]
Facebook Inside Xperia : Download Link:
Facebook Inside Xperia v.1.0
Google Apps : Download Link:
Google Apps
SEMC Mail : Download Link:
SEMC Mail
LiveWallpapers : Download Link
LiveWallpapers
Radio : Download Link:
Radio
Widget : Download Link:
Widget
Report If Error 6 [ Script Error ] Happens Cause I Am Not Using ICS Im In GB...
Themes : Cheers Coming Soon..
Screenshots:
ChangeLog's Area:
ChangeLog v2.0 NEO
HTK Tweak For More Smooth Transition ~ Best If OverClocked
BootLoop Fix
Fixed Xperia S UI
BuG Fix Of Framework
Build.prop Updated Name
New Music Player
New Call UI
Reboot Option..
Revamped UI
Fixed Update-Script
New Toggle Buttons
NEO UI Tweak [ Kinda xD ] Only For NEO I Have NEO ROM To.. ..
By: ChaosFirZen XDA
Special Thanks To:
StockDroid ~ For HSDPA Limiting category
XtremePeople ~ For All In One Tweak
cobrato ~ For ICS Stock Kernel And USB Fixes
krabappel2548 ~ For UI And Many More Thank Yo HIM...
WasabiWa83 ~ For Making Poster He Is The Best Poster Maker.. [2012]
DooMLord ~ For Many Things Like Kernel And WiFi Modules
TheFrankenstain ~ For PowerSave,System Tweak And Other =)
If You Want To Support Me Here Is The Banner / Poster:
Reserved..............
STILL BETA ON NEO REPORT IF ANY BUG OCCURS.. Hit thanks if it helps..
It is for neo v? Or only for neo?
Sent from my ST15i using Tapatalk
V.5.5 Screen rotation error inverse
eu8umhc said:
It is for neo v? Or only for neo?
Sent from my ST15i using Tapatalk
Click to expand...
Click to collapse
Same question here.
Guess you will be providing a NEO V patch soon.
Moreover you can have only one thread on NEO and just add neo v patch there, to keep issues limited to one thread and share reviews
I flash on neo v
sj.wasan said:
I flash on neo v
Click to expand...
Click to collapse
And I suppose it's working properly? If yes, then I'll try it as well. A question. What kernel am I supposed to use for this? (Sorry, new to fastboot and stuff, so making sure).
addicted2088 said:
And I suppose it's working properly? If yes, then I'll try it as well. A question. What kernel am I supposed to use for this? (Sorry, new to fastboot and stuff, so making sure).
Click to expand...
Click to collapse
Flash the stock ICS beta kernel... present in other ICS threads ..
Same question:
1) NEO V patch ???
2) Kernel for this ROM
3) What about battery drain ?
thanks
palimatix said:
Flash the stock ICS beta kernel... present in other ICS threads ..
Click to expand...
Click to collapse
Thanks understood already. Tried the AOSP ROM and somehow now Google Play asks me to buy apps i have already purchased, even though they still show up in my orders list. Gonna try this and see what happens. probably something due to ICS.
---------- Post added at 04:10 PM ---------- Previous post was at 03:51 PM ----------
Okay, tried on Neo V, the camera is completely messed up, so I guess it needs a patch. Wifi also seems to be quite slow, but i guess that's a problem on all Sony ICS ROMs.
Hmmm.. Interesting Im Gonna FIX It ASAP..
ChaosFirZen said:
Hmmm.. Interesting Im Gonna FIX It ASAP..
Click to expand...
Click to collapse
Yeah, camera view shows up all red as if the G and B values have been made zero, plus the viewfinder image is reversed 180 degrees. And taking a pic comes all garbled as seen in this image:
http://i.imgur.com/FzRcs.jpg
Not found any other problem yet, but I'll keep looking
Camera Bug Fix Im GonnabUpload the update soon..=)
Sent from my LT18i using XDA App
addicted2088 said:
Yeah, camera view shows up all red as if the G and B values have been made zero, plus the viewfinder image is reversed 180 degrees. And taking a pic comes all garbled as seen in this image:
http://i.imgur.com/FzRcs.jpg
Not found any other problem yet, but I'll keep looking
Click to expand...
Click to collapse
I think you can use the patch on AOSP for Neo V. It has correct Neo V drivers + working flash...
also can you tell me the overall UI experience? was it laggy? Have you played HD games such as Backstab, Asphalt, any changes?
DrearierJester1 said:
I think you can use the patch on AOSP for Neo V. It has correct Neo V drivers + working flash...
also can you tell me the overall UI experience? was it laggy? Have you played HD games such as Backstab, Asphalt, any changes?
Click to expand...
Click to collapse
Overall UI was smooth, definitely good enough for use.
Didn't try any games, nope. My Neo V is new with just the inbuilt 2 GB SD card, so not trying any games at this point coming from the Galaxy S which had internal 16 GB, i have no spare high capacity SD cards yet
Also, the slow wifi is a problem for me, so i switched to another ROM for now.
Thanks for Feedback the new update will be uploaded soon..
Sent from my LT18i using XDA App
Does it support any sort of data2sd or link2sd or sdcard partitions ??
Yes if the kernel support .
Sent from my LT18i using XDA App
When will the next version coming?
Find me at Gtalk
Gmail: PM
Using XDA on my Neo V