Related
I have a problem with my phone one day to another calls are heard almost nothing too low can not find the problem and return to the original rom and nothing stays the same even prodian please help thanks..
Have you tried re-flashing your chosen rom?
Flashtool guide here...
http://forum.xda-developers.com/showthread.php?t=928343
Or...
If you want to return to your original rom but you cant, then maybe think about starting all over again from stock rom. Then you can flash to whatever you like from a nice clean install
You can do this using several methods...
PC companion...
http://www.sonymobile.com/gb/tools/pc-companion/
Sony Ericsson Update Service (SEUS)...
http://sony-ericsson-update-service.en.uptodown.com/
Wotanserver...(free but gotta sign up)
http://www.wotanserver.com/en/
Hope this helps
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
You said the button still lights up? can you get into recovery? if so just wipe system and install a rom! and try flashing a kernel with flashtool!!!!
RE: Blank Screen After Flashing Custom ROM
Thanx for getting back to me so fast. As I said, the screen is blank. That is, the backlit display works but I can see nothing else. The "Home" button lights up when i press it but the display does nothing. If/When I reboot to try to enter XRecovery, I see the SonyEricsson logo followed by the backlit screen & nothing else. The Volume up/down buttons work as I am able to silence the phone by turning volume all the way down to vibrate. Because I cannot see what's on the display, I cannot turn USB on/off to connect to PC to run SEUS/Flashtool, etc. I.E. I cannot fix the device. Usually I just boot into XRecovery to fix a problem like this but that doesn't work.
x10
hy, install sony update service and repair your phone, then install again custom rom, the indications how to repair your phone software is in the program.
Best regards
Does USB need to be On or Off on the device for Update Service to run?
daRican! said:
Does USB need to be On or Off on the device for Update Service to run?
Click to expand...
Click to collapse
Update says I already have the latest Update installed.
Flash 2.3 off line update
Sent from my Xperia X10 using xda premium
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
seem like u dont have a launcher...install launcher throuh flashtool
lilinbakar said:
seem like u dont have a launcher...install launcher throuh flashtool
Click to expand...
Click to collapse
I wish I had gotten this solution sooner. Not sure if it would have mattered. When trying to use Flashtool I kept getting an error saying my phone was not in "flash mode".
I solved my problem by flashing using Omnius & flashing firmware 'X10i_generic_SE_24_MultiTouch.rar'. This got my phone back but it was only 2.1 so I used 'DooMLoRD_v4_ROOT-zergRush-busybox-su' to get me back to 2.3, but this is where I'm at. I had Wolf's firmware before but right now I have no xRecovery installed. I thought I had rooted my phone but xRecovery isn't installed nor is Busybox.. Any ideas? Thanx in advance...EVERYONE @ XDA-DEVELOPERS rox!
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
daRican! said:
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
Click to expand...
Click to collapse
C if u can repair phone using SEUS now. Open the software without connecting phone. N then go to the update part. It should give u a repair option. Then follow those steps. Or else just connect ur phone n then start software. When it tells u ur phone is up to date click on that n then click on "repair". Then use the latest flashtool to root. Recoveries come with kernels so just flash a custom kernel.
Sent from my Xperia X10 using xda app-developers app
Many Thanks, I was finally able to use SEUS; before I could not. I used Flashtool to upgrade/downgrade kernel. However, I still don't have XRecovery installed & I'm not sure how to do this. I can't install XRecovery using Flashtool. Any help would be greatly appreciated. I would really like to install a custom Rom again.
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
I'm Back, Baby!
AdX9170 said:
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
daRican! said:
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
Click to expand...
Click to collapse
Ur welcome i don't think u need help you just flashed a custom ROM.. the procedure for installing ICS is the same. Although it'd be better if you are on stock before installing it.. just look for an ICS ROM that u like (I'm using feralab n it works like a charm).
Get the kernel n ROM.. as usual, put the ROM zip on ur SD card, flash the kernel, install ROM from recovery
Although before installing:
1. In recovery go to mounts n storage
2. Format system data n cache
3. Mount system, data n cache (note that if the mounting is successful the options should change to unmount system, unmount data, unmount cache respectively)
4. Then install ROM
5. The installer is GUI based so it'll guide u really well through the installation
Sent from my Xperia X10 using xda app-developers app
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
your LCD flexibel not improperly installed or detached, just open your x10 with screwdriver, and plug it in again your LCD flexible socket.
Iam sory if my english bad
Since I flashed my rom.My phone comes on but I can see anything, even when starting I can't see anything...
I really need help..
I will appreciate if you help me sort it out.
HI
I need help urgently.
Yesterday my phone was blocked while writing a sms, button gave no sign of life, so I removed the battery and turned on the cellphone.
The mobile phone blocked again when writing a sms, and went back to do the same thing, but this time the mobile phone is not entered in MIUI and also did not appear the logo of SONY. It vibrates and lights up when I turn the backlight of the screen, but does not anymore.
I exchanged PM's with Sandy7, and he told me to flash the stock ftf via FlashTool, but I've used all the official ROMS for sk17i I found here: http://forum.xda-developers.com/showthread.php?t=2029238
And it's always the same problem.
Someone can help me?
Thanks in advance.
PS: Sorry for my english
This look likes a hardware defect. First, i was think about wrong kernel, but when i read your post again, i'm sure there is a problem with hardware. Maybe memory. I have same problem, but in GB. I'm just remove my sd, and everything working ok. So try it without SD. Maybe is not this fault, but you can try it.
varfik3311 said:
This look likes a hardware defect. First, i was think about wrong kernel, but when i read your post again, i'm sure there is a problem with hardware. Maybe memory. I have same problem, but in GB. I'm just remove my sd, and everything working ok. So try it without SD. Maybe is not this fault, but you can try it.
Click to expand...
Click to collapse
I did this, I switched the SD and also tried without SD. But still the same ... I'm desperate: (
I really need help. I can not do without mobile phone, is there any way to fix this?
firmware.......................
hknunes said:
HI
I need help urgently.
Yesterday my phone was blocked while writing a sms, button gave no sign of life, so I removed the battery and turned on the cellphone.
The mobile phone blocked again when writing a sms, and went back to do the same thing, but this time the mobile phone is not entered in MIUI and also did not appear the logo of SONY. It vibrates and lights up when I turn the backlight of the screen, but does not anymore.
I exchanged PM's with Sandy7, and he told me to flash the stock ftf via FlashTool, but I've used all the official ROMS for sk17i I found here: http://forum.xda-developers.com/showthread.php?t=2029238
And it's always the same problem.
Someone can help me?
Thanks in advance
PS: Sorry for my english
Click to expand...
Click to collapse
The thread which you are followed is for custom roms & kernels ..............you have to try to flash the official firmware for your Xperia MINI PRO its also called MANGO............. go to this thread and follow the instructions and please do thank him for his tutorials http://http://forum.xda-developers.com/showthread.php?t=1695514 may be this will help you good luck...............
if you think i have helped you you can press thanks button for me....................................
Have you tried flash another suitable kernel?
Sent from my LiveWithWalkman using xda app-developers app
Thanks for the tips but none worked: (
One thing I noticed was that the mobile phone charging the LED functions normally and if I press the 'HOME' the backlight illuminates. but no image.
I think the better way must go to Sony service.They will help you fix it. I think its belong hardware.
Sent from Hell by Xperia
First of all, I wanted to say hello since this is my first post here :victory: and also please if I am posting wrong or if this question has been answered before forgive me, but I have already searched on google and on this forum and found no related posts Ok now about my problem:
I have a "Sony Ericsson Xperia X10mini Pro" with MiniCM10-4.1.0-20130416(mimmi) and 2.6.32.60-nAa-jb-05 kernel installed. Yesterday I decided to go back to U20_nAa-14_2.6.29.6-nAa-14 kernel and MiniCM7-2.2.1-mimmi-UNOFFICIAL because of wifi problems. I have done the flashing process with flashtool a lot of times in the past and I can't be wrong with it this time.
The problem started after flashing my kernel. Flashtool flashed the U20_nAa-14_2.6.29.6-nAa-14 kernel fine and phone was OK ready to reboot, so I unplugged the USB cable to start it on recovery so I could install Minicm from SD, but since I unplugged the cable the phone is DEAD! No led and no charging! :crying: When I try to reflash it, flashtool doesn't recognize it, I am pressing the back button and plugging it in but the phone is not recognized. It is not charging when I am plugging it on the charger and its not even trying to boot. I tried different cables, different battery (from a friend with the same phone) and nothing. Is there a way to force flash it back? Please any help will be appreciated since I have tried everything I know...
This has happend to other users too reasently.
I'm not sure if it only happens when going from JB to GB or it also happens when going from GB to JB.
We need to investigate why/how it happens and how to prevent it.
I always recomend to do a battery stat whipe just before a planed kernel-flash. I had simular problem once (no charge, no boot, no nothing) after a kernel-flash. I solved it by putting in a battery from another Mimmi (my wife has the same model). For some reason everything worked fine doing so. After battery stat whipe, the phone worked with my own battery again.
Best advise for others is for now: When you want to flash new kernel, first do a SEUS/PC Companion repair
This should be written into all install-instructions and mentioned again and again to avoid same problem for others.
I'm not sure how the other users solved this. Was it only by JTAG?
Thank you for your answer! :good:
First of all, there was no battery wipe option on this release of the kernel As I said before I have done it a couple of times in the past and every time with battery wipe, except this one and besides, I already tried your solution with my friends battery with no luck... So probably I am looking for another solution.
And one last thing about your post, what is "JTAG"?? I have seen it on other posts before but without explanation as to what it is, the only JTAG I know of is on the xbox360 And if its a possible solution how can I possibly do it? Is there a post with instructions?? (I will search on my own too now, but a recommended guide from someone who knows better is much appreciated!)
Emperor.dk said:
This has happend to other users too reasently.
I'm not sure if it only happens when going from JB to GB or it also happens when going from GB to JB.
We need to investigate why/how it happens and how to prevent it.
I always recomend to do a battery stat whipe just before a planed kernel-flash. I had simular problem once (no charge, no boot, no nothing) after a kernel-flash. I solved it by putting in a battery from another Mimmi (my wife has the same model). For some reason everything worked fine doing so. After battery stat whipe, the phone worked with my own battery again.
Best advise for others is for now: When you want to flash new kernel, first do a SEUS/PC Companion repair
This should be written into all install-instructions and mentioned again and again to avoid same problem for others.
I'm not sure how the other users solved this. Was it only by JTAG?
Click to expand...
Click to collapse
zero2048 said:
Thank you for your answer! :good:
First of all, there was no battery wipe option on this release of the kernel As I said before I have done it a couple of times in the past and every time with battery wipe, except this one and besides, I already tried your solution with my friends battery with no luck... So probably I am looking for another solution.
And one last thing about your post, what is "JTAG"?? I have seen it on other posts before but without explanation as to what it is, the only JTAG I know of is on the xbox360 And if its a possible solution how can I possibly do it? Is there a post with instructions?? (I will search on my own too now, but a recommended guide from someone who knows better is much appreciated!)
Click to expand...
Click to collapse
I'm pretty sure he flashed the x10blrelock.ftf instead of the u20 kernel and that is why his phone went dead.
A JTAG for our phone will do basically the same thing as a JTAG for the xbox, it restores original phone-state, but you need special equipment to do it, which is quite expensive. Most repair-shops will have one.
SmG67 said:
I'm pretty sure he flashed the x10blrelock.ftf instead of the u20 kernel and that is why his phone went dead.
A JTAG for our phone will do basically the same thing as a JTAG for the xbox, it restores original phone-state, but you need special equipment to do it, which is quite expensive. Most repair-shops will have one.
Click to expand...
Click to collapse
Thank you for the answer about jtag, I also checked for myself and found about the expensive equipment and propably its not the way for me
But about the kernel I am pretty sure it was the right file...
I know that a dead phone means bad kernel but its a process that I have done before a lot of times with success on mine and other phones My best guess is that something interrupted the process (bad usb cable?) or corrupted downloaded kernel file If that's the case is there an alternative solution? :crying:
zero2048 said:
Thank you for the answer about jtag, I also checked for myself and found about the expensive equipment and propably its not the way for me
But about the kernel I am pretty sure it was the right file...
I know that a dead phone means bad kernel but its a process that I have done before a lot of times with success on mine and other phones My best guess is that something interrupted the process (bad usb cable?) or corrupted downloaded kernel file If that's the case is there an alternative solution? :crying:
Click to expand...
Click to collapse
Usually, whatever you flash, even if it goes bad, flashmode is still available because that doesn't get tampered with, the only true hardbrick i've ever seen is when flashing that x10blrelock.ftf, which happens quite a lot lately.
Just for fun i even formatted my entire phone once, no kernel, no rom, completely empty, and flashmode was still there so it could be recovered.
I noticed that in some older versions of flashtool you sometimes had to click the kernel you wanted twice in order to get it to pick up the right one. Normally there's not much difference you can spot (most .ftf's just contain a loader and a kernel), but i had full SE firmware in .ftf format, which contained other sections too, and that's where i noticed it didn't always pick it up right at the first time of clicking.
SmG67 said:
Usually, whatever you flash, even if it goes bad, flashmode is still available because that doesn't get tampered with, the only true hardbrick i've ever seen is when flashing that x10blrelock.ftf, which happens quite a lot lately.
Just for fun i even formatted my entire phone once, no kernel, no rom, completely empty, and flashmode was still there so it could be recovered.
I noticed that in some older versions of flashtool you sometimes had to click the kernel you wanted twice in order to get it to pick up the right one. Normally there's not much difference you can spot (most .ftf's just contain a loader and a kernel), but i had full SE firmware in .ftf format, which contained other sections too, and that's where i noticed it didn't always pick it up right at the first time of clicking.
Click to expand...
Click to collapse
I understand what you mean and its really easy to make the mistake!! But well, still I don't think I made it but I guess there is nothing more to do anyway Thank you both for your help and I hope soon to return the favor on this forum :victory:
Can you tell me an average cost about the recovery process according to your experiance in your country?? Is is expensive in general?
zero2048 said:
I understand what you mean and its really easy to make the mistake!! But well, still I don't think I made it but I guess there is nothing more to do anyway Thank you both for your help and I hope soon to return the favor on this forum :victory:
Can you tell me an average cost about the recovery process according to your experiance in your country?? Is is expensive in general?
Click to expand...
Click to collapse
Someone in this forum had it done in Latvia for next to nothing.
In the USA it will cost you, your right arm.
zero2048 said:
I understand what you mean and its really easy to make the mistake!! But well, still I don't think I made it but I guess there is nothing more to do anyway Thank you both for your help and I hope soon to return the favor on this forum :victory:
Can you tell me an average cost about the recovery process according to your experiance in your country?? Is is expensive in general?
Click to expand...
Click to collapse
I just had a look online for prices in my country, it seems to be around €25.
SmG67 said:
I just had a look online for prices in my country, it seems to be around €25.
Click to expand...
Click to collapse
Emperor.dk said:
Someone in this forum had it done in Latvia for next to nothing.
In the USA it will cost you, your right arm.
Click to expand...
Click to collapse
Emperor.dk how old are you?
SmG67 thank you again and I will delete x10blrelock.ftf just in case....
hi guys, i have the same problem too, when my rom is minicm10 and my kernel is jb-naa-05, i want to go back to MiniCM7 because of green screen camera in MiniCM10 so i go back to MiniCM7, I flashed the right kernel e10-2.6.29.6-naa-14 for my x10 mini via flashtool and after i flash the kernel, my phone does not booting up(5 mins no booting up) so i decided to use seus but seus does not recognize my x10 mini, i try flashtool, but flashtool is not recognize my x10 mini so i tried to flash my created stock 2.1.ftf(thanks to leajian) and selected x10 mini from device selection(my x10 mini is not recognize in flashtool), then i wait until it finish, when i tried to open my phone, it boots up and show sony ericsson logo and it boots up(sucess!!!)...
sorry for my english...
so for all MiniCM10 Users, Dont try to go back to MiniCM7 If your Rom is MiniCM10 because it will cause your phone to not booting up like my problem.
Renz29 said:
hi guys, i have the same problem too, when my rom is minicm10 and my kernel is jb-naa-05, i want to go back to MiniCM7 because of green screen camera in MiniCM10 so i go back to MiniCM7, I flashed the right kernel e10-2.6.29.6-naa-14 for my x10 mini via flashtool and after i flash the kernel, my phone does not booting up(5 mins no booting up) so i decided to use seus but seus does not recognize my x10 mini, i try flashtool, but flashtool is not recognize my x10 mini so i tried to flash my created stock 2.1.ftf(thanks to leajian) and selected x10 mini from device selection(my x10 mini is not recognize in flashtool), then i wait until it finish, when i tried to open my phone, it boots up and show sony ericsson logo and it boots up(sucess!!!)...
sorry for my english...
so for all MiniCM10 Users, Dont try to go back to MiniCM7 If your Rom is MiniCM10 because it will cause your phone to not booting up like my problem.
Click to expand...
Click to collapse
If you follow nAa's instructions properly, there is no problem.
What you have to do:
Wipe data/factory reset in CWM on the JB-kernel
Flash the GB-kernel
Format /system, /data en /cache, so they get back to the original sizes
Flash the GB-ROM, or restore a previous GB-backup you may have had
No problems at all...
And your phone still had flashmode available, unlike the OP of this thread, so you don't have the 'same' problem
zero2048 said:
Emperor.dk how old are you?
Click to expand...
Click to collapse
Why?
If you are asking me on a date? LOL, the answer is no :laugh:
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Rooted Apps & System info/apps on my phone are in a File Manager > xposed, bootmanager, clockworkmod, rom mod installer pro, Titanium Pro, and others...Can it someway be just flashed to a new rom of some version? :crying: Thanks in advance.......
Cedar1111 said:
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Rooted Apps & System info/apps on my phone are in a File Manager > xposed, bootmanager, clockworkmod, rom mod installer pro, Titanium Pro, and others...Can it someway be just flashed to a new rom of some version? :crying: Thanks in advance.......
Click to expand...
Click to collapse
Don't think that there are any custom updates. I found this: https://www.youtube.com/watch?v=-IOQJJCSKC4 - Sorry it's not in English, but it's the only thing I found that actually had a download of the rom. Even Pantech doesn't seem to have anything besides the manual and drivers for it.
Thanks
es0tericcha0s said:
Don't think that there are any custom updates. I found this: - Sorry it's not in English, but it's the only thing I found that actually had a download of the rom. Even Pantech doesn't seem to have anything besides the manual and drivers for it.
Click to expand...
Click to collapse
So I'm not bricked or anything right? If I was it wouldn't boot at all right?
Cedar1111 said:
So I'm not bricked or anything right? If I was it wouldn't boot at all right?
Click to expand...
Click to collapse
If the device powers up but is not able to boot into the operating system, that is referred to as a soft brick.
es0tericcha0s said:
If the device powers up but is not able to boot into the operating system, that is referred to as a soft brick.
Click to expand...
Click to collapse
Thanks ,, Any ideas on how I can fix this issue, or install a new rom ?
es0tericcha0s said:
Don't think that there are any custom updates. I found this: - Sorry it's not in English, but it's the only thing I found that actually had a download of the rom. Even Pantech doesn't seem to have anything besides the manual and drivers for it.
Click to expand...
Click to collapse
your right, it's not English, therefore I'm outta luck on that. haha although I still watched and tried to see if just maybe I'd catch some insight from it.. but thank you for sharing it with me..