So basically I've just unlocked my bootloader last night. Used three hours to do so. And Before I slept, I flashed DoomKernel v06-1113 and everything was fine. SO I decided to flash DoomKernel V06 as it is said to be highly recommended for the rom I want, "FeraLab" So, I flashed V06 and the next thing that happen was the phone just stucks at DoomKernel Logo. Lasted for 20mins or so. I decided to pull out the battery and inserted it again. Stucked at DoomKernel Logo AGAIN but this time the screen gets dimmer after 4 secs or so. And the whole thing just seem to reboot again. And it goes on and on and on. Decided to take out the battery and just leave it like this hoping it would somehow work the next morning. The same problem just go on and on. But there was once, the whole thing fully rebooted and finally start up. I tried putting the freq to max on Set CPU and it went into reboot again. Straight. Now things just go back like before. Kept rebooting over and over again. I'm hoping for an answer ASAP as I'm gonna need to use my phone for a really really long time later this afternoon. Am going out for basketball practice now and will be checking for any replies. PLEASE AND THANKS IN ADVANCE.
Am gonna try using PC companion to repair. Hope it's a correct choice cuz I dont seem to be able to enter the xrecovery mode
Still waiting for more guidance. Help is much appreciated
PC companion never got to fully repair it cuz the part where they prepare the computer to update took too long and it never moved. Decided to try downloading SEUS to repair.
Still waiting for more guidance. Help is much appreciated
rickyX10User said:
PC companion never got to fully repair it cuz the part where they prepare the computer to update took too long and it never moved. Decided to try downloading SEUS to repair.
Still waiting for more guidance. Help is much appreciated
Click to expand...
Click to collapse
it would seems like ur x10 cant handle OC. i suggest u try the FS version
check it at DL thread.
http://forum.xda-developers.com/showpost.php?p=21214246&postcount=1356
here is the thread. try the 3rd option (FS)
remember to flash the wifi module as well
Thanks for your reply but like I said, I cant seem to enter xrecovery. How am I able to flash the rom?
allright buddy i will tell you exactly what you need to do
first thing go to this link
http://forum.xda-developers.com/showthread.php?p=21214246#post21214246
and download the medium overclocked version of the doom kernel which means the v06-1113 doom kernel i have the same problem my phone reboots as well if i used the 1228Mhz version it is just that it can't handle itand you have got that one flashed on your phone so go ahead and flash the v06-1113 doom kernel through flashtool an then it will let you go to xrecovery and i am also using the FeraLab v4
and it works perfect and you can visit the FeraLab rom page by clicking the link below
http://forum.xda-developers.com/showthread.php?t=1458001
Problem solved. Thanks for your help anyway
What I did was I used PC Companion to repair it and flashed v06 1113 into it. Thanks alot for your time and help =)
rickyX10User said:
Thanks for your reply but like I said, I cant seem to enter xrecovery. How am I able to flash the rom?
Click to expand...
Click to collapse
LOL the link i provided is for kernel, .ftf file. it was meant to be flash by flashtool.
as u know, the kernel provide 3 type of kernel (details at Doom's thread), once u flash the kernel, u will able to enter the boot manager (or any recovery that u want)
just wanted to clarify.
glad ur problem solve, but using this method would be easier as u does not need to reconfigure again. personally experienced it b4
But I thought you'll need to turn on your phone, get it connected to FT with it recognizing your phone, then select the file you want to flash, unplug it, turn it off and then enter flash mode. My phone din't seem to be able to be recognized by FT while it was soft bricked
rickyX10User said:
But I thought you'll need to turn on your phone, get it connected to FT with it recognizing your phone, then select the file you want to flash, unplug it, turn it off and then enter flash mode. My phone din't seem to be able to be recognized by FT while it was soft bricked
Click to expand...
Click to collapse
Hi ,
Now i have revert it to2.3.3 ginger bread and it is successfully running. Please suggest which andriod 4 version should i go for my mobile
sanjays183 said:
Hi ,
Now i have revert it to2.3.3 ginger bread and it is successfully running. Please suggest which andriod 4 version should i go for my mobile
Click to expand...
Click to collapse
My suggestion is don't go for ICS ROMs... they eat battery and your phone will have to be charged once every 10 hrs... so stick to gingerbread... go for tech devils ROM which is super light and long battery....
Sent from my Transformer TF101 using xda app-developers app
udupa82 said:
My suggestion is don't go for ICS ROMs... they eat battery and your phone will have to be charged once every 10 hrs... so stick to gingerbread... go for tech devils ROM which is super light and long battery....
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
well, i kinda agree in some of ya point that ics in x10 does eat more battery energy, but X10 it've done its best for 4" screen resolution 480*854, single core 1GHz with only 288MB RAM max. Many people still looking forward for it in ics though. And battery hours in ics (if just message, wifi, phonecall, alarm) can stand up to 3days (until battery 10% left) depending governor and frequency ya set. But if HD gaming, gingerbread still works great because it'meant for gaming including emulating games.
Whitefang
sanjays183 said:
Hi ,
Now i have revert it to2.3.3 ginger bread and it is successfully running. Please suggest which andriod 4 version should i go for my mobile
Click to expand...
Click to collapse
Depends to person liking. For me, Xperia S ICS CM9 by senior Vashista reddy. Great RAM freed and smoothness. Enough for wifi, call, music, 6MP camera uncompressed, but not video camcording or play. Older version still works great and smooth. But newer version jellycream got some fixes needed to be implemented. hope helps.
Whitefang
rickyX10User said:
PC companion never got to fully repair it cuz the part where they prepare the computer to update took too long and it never moved. Decided to try downloading SEUS to repair.
Still waiting for more guidance. Help is much appreciated
Click to expand...
Click to collapse
Hello friend, you cant repair your x10 thru seus or pccompanion coz youre using a custom kernel, my advice is flash a different kernel like thkernel then let it boot, if it successfully booted then try flashing again doomkernel.. Press thanks button if i helped you buddy. :thumbup:
Sent from my X10i using xda premium
Related
I was reboot my phone and once he do this:
Screen out (duh) screen on with ''Sony Ericsson'' then he still stay
on that, idk dont know why.
I have reinsert my battery i have used the right and left button`s.....
So, if someone can help me with a other option, please help me...
Very Thanks alot!!!...
x10i-user said:
I was reboot my phone and once he do this:
Screen out (duh) screen on with ''Sony Ericsson'' then he still stay
on that, idk dont know why.
I have reinsert my battery i have used the right and left button`s.....
So, if someone can help me with a other option, please help me...
Very Thanks alot!!!...
Click to expand...
Click to collapse
try using flashtool. directions are in the link.
U mentioned you have a x10i correct, then pick the firmware you want with the x10i with the latest baseband. if you still have questions, keep asking.
rooting is next if you go that route then, flashing ROMS, which are associated with a baseband
here is the link for flashtool: http://forum.xda-developers.com/showthread.php?t=920746
Yeah dude, use flashtool.... just flash it back... tht worked for me... i bricked my phone once.... now its rollin again....
how long did you leave it on the SE screen for?? sometimes mine takes a minute to boot through that?
im_iceman said:
how long did you leave it on the SE screen for?? sometimes mine takes a minute to boot through that?
Click to expand...
Click to collapse
ummmmh, more then 24 hours... :S
but i gonna try Flashtool right now, i hope i will work.
you could also just repair it using SEUS... depends if you want to root and install custom ROM's etc..
im_iceman said:
you could also just repair it using SEUS... depends if you want to root and install custom ROM's etc..
Click to expand...
Click to collapse
ok, i`ll try...
i can`t place my phone in Flashmode he gonna automatic to the Sony Ericsson logo...
What did i wrong?...
fire up SEUS, get to the bit where it say to connect your phone.
take the battery out for 10 seconds or so..
plug the micro USB cable into your phone only..
hold the back key (and keep it held until SEUS tells you to release it later in the process), push the battery back in
push the USB cable into your PC.
Should boot up into flash mode and SEUS will do it's thing!.
Done it before
Hi mate done it today since im new at rooting if you were trying to install a theme or rom, you might not have their firmware, if this is the case then you just from that Sony Ericsson screen keep pushing the Back or <-- key, this will boot you into xrecovery and just restore... if you havent made a back up, then you could try replace the rom you have back with the Se offical 2.1 rom which you can find in Android dev. and just launch it back with that... Hope this worked!!
I tried flashing the new CM7 ROM (cheers J) and I turned it on after backing up, wiping and flashing absolutely everything I had to. It went through the normal startup and then after the "Sony Ericsson" logo it said at the top of the screen "Loading custom kernel. Bye!" It then showed the CM7 logo and spent around 5 minutes booting up. I then got the WLOD and my phone just died really ever since then. Every time I turn it on, even when plugging it into the charger, I get a vibration and then the screen gets stuck on the "Sony Ericsson" page and won't change (I left it for 5 hours like that and it didn't change. Also, no matter how much I spam the back button, it will not enter xRecovery. I am slightly worried as I am meant to be going abroad this Wednesday and will definately need it then. Can anyone help me?
rhymesmoore said:
I tried flashing the new CM7 ROM (cheers J) and I turned it on after backing up, wiping and flashing absolutely everything I had to. It went through the normal startup and then after the "Sony Ericsson" logo it said at the top of the screen "Loading custom kernel. Bye!" It then showed the CM7 logo and spent around 5 minutes booting up. I then got the WLOD and my phone just died really ever since then. Every time I turn it on, even when plugging it into the charger, I get a vibration and then the screen gets stuck on the "Sony Ericsson" page and won't change (I left it for 5 hours like that and it didn't change. Also, no matter how much I spam the back button, it will not enter xRecovery. I am slightly worried as I am meant to be going abroad this Wednesday and will definately need it then. Can anyone help me?
Click to expand...
Click to collapse
hello....nowdays i keep seeing dead x10....
the truth is u will never kill ur x10.....or in other words...
it will not die because of flashing.....unless u smack to the floor...
so mate please search before u post....the easy way is use SEUS
sony ericsson update service....repair option for ur phone...
good luck....
amtzone said:
hello....nowdays i keep seeing dead x10....
the truth is u will never kill ur x10.....or in other words...
it will not die because of flashing.....unless u smack to the floor...
so mate please search before u post....the easy way is use SEUS
sony ericsson update service....repair option for ur phone...
good luck....
Click to expand...
Click to collapse
SEUS won't recognize my phone... I got it sorted by reflashing the original 2.1 from SE and then rerooting and reflashing xRec so now its practically back to normal. Only thing is though, I can't get rendeiro2005's [ROM][MAY24]BlackEditionHD_1.4_SE[Gingerbread 2.3.4] to work (link here: http://forum.xda-developers.com/showthread.php?p=13755473#post13755473) coz everytime I try, I just get WLOD and a reboot cycle. Any help there?
rhymesmoore said:
SEUS won't recognize my phone... I got it sorted by reflashing the original 2.1 from SE and then rerooting and reflashing xRec so now its practically back to normal. Only thing is though, I can't get rendeiro2005's [ROM][MAY24]BlackEditionHD_1.4_SE[Gingerbread 2.3.4] to work (link here: http://forum.xda-developers.com/showthread.php?p=13755473#post13755473) coz everytime I try, I just get WLOD and a reboot cycle. Any help there?
Click to expand...
Click to collapse
if u able to flash using flash tools also fine....try using flash tool...
this also happen to me when trying the custom kernel....
system process get error and keep bootloops......so i tried using SEUS..
it works fine....update ur SEUS and try pick the repair.....
amtzone said:
if u able to flash using flash tools also fine....try using flash tool...
this also happen to me when trying the custom kernel....
system process get error and keep bootloops......so i tried using SEUS..
it works fine....update ur SEUS and try pick the repair.....
Click to expand...
Click to collapse
Hows my buddy going, still sorting everybodies problems out i see, what you running now rom/theme.
Sorry for the ot but you did get your phone sorted.
amtzone said:
if u able to flash using flash tools also fine....try using flash tool...
this also happen to me when trying the custom kernel....
system process get error and keep bootloops......so i tried using SEUS..
it works fine....update ur SEUS and try pick the repair.....
Click to expand...
Click to collapse
I'm back to my old ROM (coincidently also from Rendeiro) and yeah cheers. My SEUS doesn't come up with a repair option, I only have "update". Anyway I've given up on that and am now flashing CM 7.0.3 coz it seems way more stable and from what I've heard there's no getting WLOD with it so far... so yeah cheers guys
smartgardens said:
Hows my buddy going, still sorting everybodies problems out i see, what you running now rom/theme.
Sorry for the ot but you did get your phone sorted.
Click to expand...
Click to collapse
haha hello mate...long time no see....
im still around as usual...helping what i can...
Okay, I was told to go here since people on AndroidForums.com had no clue on what to do.
Okay, here are my problems -
I received this Android from my mom and it was running Android 2.1. When I first got it, I turned it on without charging it. It booted up, came to the lockscreen, then about a second later turned off and now refuses to boot. I have tried flashing it with generic Android 2.1 and Stock ATT Android 2.1. But it refuses to do nothing but flashes a green light and vibrates. But that all it does. And PC Companion, SEUS, FlashTool have done nothing! So what do I do now? It accepts Flashes and restores, but it's like the Boot Files are corrupted. And I cannot JTAG, so is there any other options?
Thanks in Advanced,
NetworkLabs
NetworkLabs said:
Okay, I was told to go here since people on AndroidForums.com had no clue on what to do.
Okay, here are my problems -
I received this Android from my mom and it was running Android 2.1. When I first got it, I turned it on without charging it. It booted up, came to the lockscreen, then about a second later turned off and now refuses to boot. I have tried flashing it with generic Android 2.1 and Stock ATT Android 2.1. But it refuses to do nothing but flashes a green light and vibrates. But that all it does. And PC Companion, SEUS, FlashTool have done nothing! So what do I do now? It accepts Flashes and restores, but it's like the Boot Files are corrupted. And I cannot JTAG, so is there any other options?
Thanks in Advanced,
NetworkLabs
Click to expand...
Click to collapse
Plug in the charger while its off its most likely reallt dead!!!!
sent from my x10 using xda premium
stephenhiscock98 said:
Plug in the charger while its off its most likely reallt dead!!!!
sent from my x10 using xda premium
Click to expand...
Click to collapse
No, because I charged it all night and tried to turn it on with no success. So that isn't the problem...
Flash 2.3 firmware then do root,recovery(just in case you don't have it) and a kernel.
Sent from my Desire HD using xda premium
Here is the firmware, thank the logic please.http://forum.xda-developers.com/showthread.php?t=1749426
Sent from my Desire HD using xda premium
My only fear is after restore/flash to 2.3, it will most likely sit there forever. The screen doesn't even light up! So if is to happen, what do I do?
NetworkLabs said:
My only fear is after restore/flash to 2.3, it will most likely sit there forever. The screen doesn't even light up! So if is to happen, what do I do?
Click to expand...
Click to collapse
No it wont if you flash stock 2.3 it will wotk!
sent from my x10 using xda premium
I had quite the similar issue with my x10i. One day it just decided to stop working completely. No lights no nothing, tried everything, just dead. So I contacted SE and they said they could do nothing if the software had been tampered with, no matter how much I assured them if was a hardware related fault.. So I went to my carrier and they sent me to a phone repairing company (Fonemenders here in Ireland), who try fix the phone themselves by getting parts in from the manufacturers. If they deem your phone irreparable they will get you a new replacement. This is exactly what happened me. So the other day I received an email saying that seeing as my x10 couldn't be fixed, I'd be receiving a Sony Arc as a replacement! So i'm happily waiting for the Arc to get here while I use my moms old x8.
So my best advice if nothing is working, go to your carrier and hopefully they can get you through to a phone repairing place, and I wish you as good luck as my own
Well, I cannot replace the Phone since I am not really using it as a Phone. It will not be activated, it's just to mess around with. And I really don't want to buy a Samsung Galaxy Player just so I don't have to deal with this. So I'm going to try the Stock ROM now and see if it works. Do I have to wait for boot up or something?
Try to flash with SE Companion. It will work.
Well, I restored using SEUS because it's the only one that recognized the phone, other than FlashTool. After it restored, it said Unplug the phone and wait for first time. It will take a while. So I am currently doing that. Hope it turns on!
Well, I've restored it and it still sits here. What's next?
I am going to try to flash it using s1tool and see if that helps. Also, can someone please respond with what they think is wrong?
Okay, here's another question - In order to load the firmware you told me, does my Bootloader have to be UNLOCKED? If so, how do I do that without ROOT... Because I cannot do anything with the Phone.
NetworkLabs said:
Okay, here's another question - In order to load the firmware you told me, does my Bootloader have to be UNLOCKED? If so, how do I do that without ROOT... Because I cannot do anything with the Phone.
Click to expand...
Click to collapse
Nooo to flash a stock firmware you don't need unlocked bootloader
sent from my x10 using xda premium
Well, it won't let it. It either doesn't recognize the device or it returns a error... =/
I cannot flash the firmware that you suggested! It get's to system.sin and then aborts with no error information...
Any additional help?
NetworkLabs said:
I cannot flash the firmware that you suggested! It get's to system.sin and then aborts with no error information...
Click to expand...
Click to collapse
I have a question for you... is the phone rooted ? If not then try following
1) start your PC companion and select update software
2) if software say, your phone is up to date then use here will be repair option you need to select it.
3) once you select repair it will download stock GB 2.3.3 and after download it will ask you to plug you phone in flash mode
4) remove phones battery and connect the phone to your laptop.
5) now place the battery back while holding down the back button (3rd button from left) { this step is important as this will get your phone into flash mode.
6) above steps should get your phone back onto stock unrooted ROM...
if you want then use flash tool to root it again but be careful with kernels and bootloader
Set from my Transforer TF101 using xda app-developers app
Well, I think I have tried that and it still won't boot. But I will try again. (PS - Sorry for this old thread, but I just needed a break on working on it! I am going to try again and see if it works!)
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
You said the button still lights up? can you get into recovery? if so just wipe system and install a rom! and try flashing a kernel with flashtool!!!!
RE: Blank Screen After Flashing Custom ROM
Thanx for getting back to me so fast. As I said, the screen is blank. That is, the backlit display works but I can see nothing else. The "Home" button lights up when i press it but the display does nothing. If/When I reboot to try to enter XRecovery, I see the SonyEricsson logo followed by the backlit screen & nothing else. The Volume up/down buttons work as I am able to silence the phone by turning volume all the way down to vibrate. Because I cannot see what's on the display, I cannot turn USB on/off to connect to PC to run SEUS/Flashtool, etc. I.E. I cannot fix the device. Usually I just boot into XRecovery to fix a problem like this but that doesn't work.
x10
hy, install sony update service and repair your phone, then install again custom rom, the indications how to repair your phone software is in the program.
Best regards
Does USB need to be On or Off on the device for Update Service to run?
daRican! said:
Does USB need to be On or Off on the device for Update Service to run?
Click to expand...
Click to collapse
Update says I already have the latest Update installed.
Flash 2.3 off line update
Sent from my Xperia X10 using xda premium
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
seem like u dont have a launcher...install launcher throuh flashtool
lilinbakar said:
seem like u dont have a launcher...install launcher throuh flashtool
Click to expand...
Click to collapse
I wish I had gotten this solution sooner. Not sure if it would have mattered. When trying to use Flashtool I kept getting an error saying my phone was not in "flash mode".
I solved my problem by flashing using Omnius & flashing firmware 'X10i_generic_SE_24_MultiTouch.rar'. This got my phone back but it was only 2.1 so I used 'DooMLoRD_v4_ROOT-zergRush-busybox-su' to get me back to 2.3, but this is where I'm at. I had Wolf's firmware before but right now I have no xRecovery installed. I thought I had rooted my phone but xRecovery isn't installed nor is Busybox.. Any ideas? Thanx in advance...EVERYONE @ XDA-DEVELOPERS rox!
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
daRican! said:
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
Click to expand...
Click to collapse
C if u can repair phone using SEUS now. Open the software without connecting phone. N then go to the update part. It should give u a repair option. Then follow those steps. Or else just connect ur phone n then start software. When it tells u ur phone is up to date click on that n then click on "repair". Then use the latest flashtool to root. Recoveries come with kernels so just flash a custom kernel.
Sent from my Xperia X10 using xda app-developers app
Many Thanks, I was finally able to use SEUS; before I could not. I used Flashtool to upgrade/downgrade kernel. However, I still don't have XRecovery installed & I'm not sure how to do this. I can't install XRecovery using Flashtool. Any help would be greatly appreciated. I would really like to install a custom Rom again.
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
I'm Back, Baby!
AdX9170 said:
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
daRican! said:
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
Click to expand...
Click to collapse
Ur welcome i don't think u need help you just flashed a custom ROM.. the procedure for installing ICS is the same. Although it'd be better if you are on stock before installing it.. just look for an ICS ROM that u like (I'm using feralab n it works like a charm).
Get the kernel n ROM.. as usual, put the ROM zip on ur SD card, flash the kernel, install ROM from recovery
Although before installing:
1. In recovery go to mounts n storage
2. Format system data n cache
3. Mount system, data n cache (note that if the mounting is successful the options should change to unmount system, unmount data, unmount cache respectively)
4. Then install ROM
5. The installer is GUI based so it'll guide u really well through the installation
Sent from my Xperia X10 using xda app-developers app
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
your LCD flexibel not improperly installed or detached, just open your x10 with screwdriver, and plug it in again your LCD flexible socket.
Iam sory if my english bad
Since I flashed my rom.My phone comes on but I can see anything, even when starting I can't see anything...
I really need help..
I will appreciate if you help me sort it out.
Morning everyone
i have tried to search the forums with a similar problem, but i couldnt find a solution to this.
NOTE; If there is, please provide a link to the post, i'll appreciate that.
So this is what happened :
i flashed the phone with custom rom ( MiniCM9/JB/ICS) successfully..but after finding that the camera didnt work with one of the roms ICS i think, i reverted back to the original e10i kernel.
the problem with this is that PC Companion couldnt update my phone, as it didnt recognise it, it only said SONY/SONY ERICSSON phone..apart from that, the battery seems to have died out, i tried charging it on the wall plug but it would boot up and display the SONY ERICSSON logo and after a few seconds, restart. it doesnt seem to charge the phone but rather gives it a 'boost' to boot up. it does the same thing when plugged in the laptop. Now, the baterry seems to have been depleted completely as the red led flashes while still connected in flash mode.
I expected a big battery icon to display when i charged it on the wall plug but i got the boot logo...and restarts..SEUS said i have the latest software..PC companion couldnt ''repair'' it because the battery would run out while still connected in flashmode.
Please assist me in anyway.
thanks
AGAIN : if there is a problem somewhere in the forums PLEASE direct me to it, i dont wanna cause any spam on the forums.
Thank you
hands360 said:
Morning everyone
i have tried to search the forums with a similar problem, but i couldnt find a solution to this.
i flashed the phone with custom rom ( MiniCM9/JB/ICS) successfully..but after finding that the camera didnt work with one of the roms ICS i think, i reverted back to the original e10i kernel.
I expected a big battery icon to display when i charged it on the wall plug but i got the boot logo...and restarts..SEUS said i have the latest software..PC companion couldnt ''repair'' it because the battery would run out while still connected in flashmode.
Click to expand...
Click to collapse
Your main problem is that you still have the custom ROM although you're back on stock kernel. Try to flash this with flashtool.
downloading
SmG67 said:
Your main problem is that you still have the custom ROM although you're back on stock kernel. Try to flash this with flashtool.
Click to expand...
Click to collapse
Thanks bro..i'm downloading it now will try it after an hour or so..have to go to a friends house for a laptop..thanks to lighting storm. Anyway i'll keep you updated with the process.
After doing so can i flash custom rom?(i'd like to think so, just confirming to ease my conscience lol) and currently which is the most stable rom between the aforementioned roms? Just looking for your opinion.
Thanks again.
hands360 said:
Thanks bro..i'm downloading it now will try it after an hour or so..have to go to a friends house for a laptop..thanks to lighting storm. Anyway i'll keep you updated with the process.
After doing so can i flash custom rom?(i'd like to think so, just confirming to ease my conscience lol) and currently which is the most stable rom between the aforementioned roms? Just looking for your opinion.
Thanks again.
Click to expand...
Click to collapse
Yes, your bootloader will remain unlocked, so you will be able to flash custom kernels and roms, no problem.
They are working on a fix for the camera, and the first one updated will be MiniCM9 i think, but for now MiniCM7 (or other gingerbread based roms) remains the best performing option for our phones.
fail
SmG67 said:
Yes, your bootloader will remain unlocked, so you will be able to flash custom kernels and roms, no problem.
They are working on a fix for the camera, and the first one updated will be MiniCM9 i think, but for now MiniCM7 (or other gingerbread based roms) remains the best performing option for our phones.
Click to expand...
Click to collapse
Smg, i tell you, Yesterday was not my xperias day. My data bundles depleted while it had gone 80% (i think) into the download, i then recharged for another 100MB unfortunately i was using my ageing 6730c on Opera mini n the download couldnt resume! So i'd like to know, how big is the file itself because when it started, it said 114MB it reached that size and kept on going till 188MB i guess that's how much bundles i had. Anyway will try to get a wifi hotspot.
I think i'll go with the MiniCM7 for now till further development is made for these ROMS. A very big up to the developers.
Till i get that file! Later
hands360 said:
Smg, i tell you, Yesterday was not my xperias day. My data bundles depleted while it had gone 80% (i think) into the download, i then recharged for another 100MB unfortunately i was using my ageing 6730c on Opera mini n the download couldnt resume! So i'd like to know, how big is the file itself because when it started, it said 114MB it reached that size and kept on going till 188MB i guess that's how much bundles i had. Anyway will try to get a wifi hotspot.
I think i'll go with the MiniCM7 for now till further development is made for these ROMS. A very big up to the developers.
Till i get that file! Later
Click to expand...
Click to collapse
Yes, sorry about that.. it's the original SE stock 2.1 firmware and it comes in at about 210mb, although the site keeps saying differently, i don't know why it does that. You need to flash it with flashtool.
success
hey bro....guess what..it worked. I ended up downloading the file via a blackberry lol anyway it was 210MB...215 in fact..anyway my phone is fixed and ready for customisation. A very big Thank u man. I'm just waiting for it to fully charge because it was completely drained i was lucky it survived the original stock flashing.
Thanks for the time and energy you put in. I really appreciate it. Cant wait to get my Samsung Galaxy Gio lol i know its a bit old now but it hasn't seen the 'other side' of the grass.