Related
Hi. I am a first time poster but a long time follower. This past week I rooted to Nero V5. However there are two apps that I no longer have that I want but can't find. Tmobile TV no longer shows up in the market and Think Office is in the market but didnt the Vibrant come with the whole version for free. I am wondering how I can get these back. Sorry if this has been answered somewhere, but I did a search and could not find anything. I am also a noob to most of this stuff so forgive me there. Any help would be appreciated.
http://forum.xda-developers.com/showthread.php?t=894794
Brace yourself for the ****storm that you have caused upon yourself for posting in the development section my friend
nah, he is a new member and does not know better.
I wasn't going to post in here, but I thought since I had a custom rom it might be relevant. I am sorry for that. Thanks.
Here is a RIP of the Galaxy Tab's ThinkFree
It's a little bit more updated, and has tabbed browsing in spreadsheet at least.
Bad link ...on that link ... "File deleted" ... Oh well ...
Sent from my SGH-T959 using XDA App
I thought ppl with less than 10 posts cant start a thread in the dev forum?
he's been a member since last February
dsoklepek said:
Hi. I am a first time poster but a long time follower. This past week I rooted to Nero V5. However there are two apps that I no longer have that I want but can't find. Tmobile TV no longer shows up in the market and Think Office is in the market but didnt the Vibrant come with the whole version for free. I am wondering how I can get these back. Sorry if this has been answered somewhere, but I did a search and could not find anything. I am also a noob to most of this stuff so forgive me there. Any help would be appreciated.
Click to expand...
Click to collapse
Pull them out of the .zip of any of the CWM deodexed versions of the recent leaks: KA5, KA6, KA7.
--John
Hello,
I am rather new at all this stuff, but after searching for dfferent tutorials, I am trying to install ClockWorkMod Recovery on my ATT Galaxy S 2 based on the instructions below:
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II_(AT&T):_Full_Update_Guide
The problem I am having is on
Step 5. Untar codeworkx's kernel into the Heimdall directory.
When I do this, it gives me an error saying the firmware.xml is missing from the package.,
I was wondering if anyone knew the reason and a work aaround.
Thank you
Why don't you take a walk around the forums and view the forums?
I'm sure you'll find something of use. (wink, wink)
This sticky: http://forum.xda-developers.com/showthread.php?t=1511838
It will show you all that you need to know.
You're gonna get shut down (shot down?), but start here http://forum.xda-developers.com/showthread.php?t=1511838
You'll be happy you did
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
Red5 said:
This sticky: http://forum.xda-developers.com/showthread.php?t=1511838
It will show you all that you need to know.
Click to expand...
Click to collapse
Man, that's what I get for not refreshing before I post. Curse you, evil master moderator! (shakes tiny fist)
alacrify said:
You're gonna get shut down (shot down?), but start here http://forum.xda-developers.com/showthread.php?t=1511838
You'll be happy you did
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
Man, that's what I get for not refreshing before I post. Curse you, evil master moderator! (shakes tiny fist)
Click to expand...
Click to collapse
Since I AM going to get shot down, might as well go all out.
I was just wondering for my information, What is the difference between a binary and a ROM??
Use this link, I asked the same a few days ago and got a great answer
http://forum.xda-developers.com/showthread.php?t=1542567
jjack0310 said:
Hello,
I am rather new at all this stuff, but after searching for dfferent tutorials, I am trying to install ClockWorkMod Recovery on my ATT Galaxy S 2 based on the instructions below:
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II_(AT&T):_Full_Update_Guide
The problem I am having is on
Step 5. Untar codeworkx's kernel into the Heimdall directory.
When I do this, it gives me an error saying the firmware.xml is missing from the package.,
I was wondering if anyone knew the reason and a work aaround.
Thank you
Click to expand...
Click to collapse
Try re-downloading.
I just did, untar w/o any problem.
The "zImage" file is 6,561KB.
Also, try to download and untar on different computers
I thought this topic was covered in a sticky? ..Just wondering why this thread is still open and if it is already covered why are we encouraging others to start new threads about topics already discussed left and right?
..just curious
Sent from my SGH-I777 using xda premium
Coreym said:
I thought this topic was covered in a sticky? ..Just wondering why this thread is still open and if it is already covered why are we encouraging others to start new threads about topics already discussed left and right?
..just curious
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
To Coreym and others who thought this thread should be closed due to the "have been covered in Sticky" and Mod Red.
Firstly, I personally do not think this question has been covered in Sticky.
The OP asking about how to install CwM Recovery onto his phone retaining stock kernels, NOT custom kernel. Yes, I did ask the question and creepy has provided answer b4. Yes, ramos did ask the same question and got the answer, I'm sure there were one or two more in the room. Yes, it has been answered but NOT covered in the Sticky.
Secondly, I don't believe the OP should get any flame because he did do the search and did his homework, he just ran into some errors, that's why he asked for help. This is way different than others who not even do homework, haven't even tried on their system, but just asked for direction.
I believe in this case, the OP did do his best and asked for help, that's why I provided a suggestion to him, rather than flame.
My $.02
votinh said:
To Coreym and others who thought this thread should be closed due to the "have been covered in Sticky" and Mod Red.
Firstly, I personally do not think this question has been covered in Sticky.
The OP asking about how to install CwM Recovery onto his phone retaining stock kernels, NOT custom kernel. Yes, I did ask the question and creepy has provided answer b4. Yes, ramos did ask the same question and got the answer, I'm sure there were one or two more in the room. Yes, it has been answered but NOT covered in the Sticky.
Secondly, I don't believe the OP should get any flame because he did do the search and did his homework, he just ran into some errors, that's why he asked for help. This is way different than others who not even do homework, haven't even tried on their system, but just asked for direction.
I believe in this case, the OP did do his best and asked for help, that's why I provided a suggestion to him, rather than flame.
My $.02
Click to expand...
Click to collapse
There was no flame in my post..
I hope the OP or you don't take it that way.
Also maybe I read it wrong but it looks like he's trying to install CWM using codeworkx kernel.. which is a custom kernel, not stock. Even the instructions in the link he provided go back to installing a custom kernel.
Okay I just went back and don't see ANYWHERE where the OP is trying to install CWM while retaining stock kernel.. I guess I must be blind
Sent from my SGH-I777 using xda premium
votinh said:
Try re-downloading.
I just did, untar w/o any problem.
The "zImage" file is 6,561KB.
Also, try to download and untar on different computers
Click to expand...
Click to collapse
I'm at my wits end. I've been using this method: http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II_(AT&T):_Full_Update_Guide
I can not get recovery to work. The menu displays and when I pick a item from the menu I just get the top-hat screen and nothing. It can't find the sig.
I have searched this forum extensively..but I haven't found the answer.
I've put CM on my N1, Att Inspire and my short lived Skyrocket without any problems. But this time I am stumped, I can't get recovery to work.
I rooted the SGII using the Odin One Click..worked great.
And yes, I've checked: http://forum.xda-developers.com/showthread.php?t=1511838
Any suggestions?
Smokeaire said:
I can not get recovery to work. The menu displays and when I pick a item from the menu I just get the top-hat screen and nothing.
Any suggestions?
Click to expand...
Click to collapse
this used to be covered in the sticky....and probably is somewhere, since its a known 'issue'
use the HOME key to select, not the power button, on the version of CWM you are on
Pirateghost said:
this used to be covered in the sticky....and probably is somewhere, since its a known 'issue'
use the HOME key to select, not the power button, on the version of CWM you are on
Click to expand...
Click to collapse
Well I'll be. Major thanks Pirateghost. I'm not going say what # my flash counter is up to, along with all the Command prompt syntax I had to relearn.
Yea, that needs to be a sticky somewhere, not exactly self evident.
Pirateghost said:
this used to be covered in the sticky....and probably is somewhere, since its a known 'issue'
use the HOME key to select, not the power button, on the version of CWM you are on
Click to expand...
Click to collapse
I think thats in the binary yellow triangle thread or the other CWM thread... both linked from the sticky.
Red5 whats the deal with this thread? I was under the impression that this was already covered. After getting my post quoted and being told that the OP was trying to install CWM with his existing kernel, I went back and read the OP and followed his link. It seems to me that he is just trying to install CWM like we all have, using codeworkx kernel and not his existing kernel.
If that is the case, I guess I don't know why this thread hasn't been closed. Seems a little confusing to me (and probably others) as to what threads are allowed to stay and which ones aren't ... if we are talking about multiple threads with the same topic (installing CWM)..?
Not questioning your authority, just would like a little clarification.
Coreym said:
Red5 whats the deal with this thread? I was under the impression that this was already covered. After getting my post quoted and being told that the OP was trying to install CWM with his existing kernel, I went back and read the OP and followed his link. It seems to me that he is just trying to install CWM like we all have, using codeworkx kernel and not his existing kernel.
If that is the case, I guess I don't know why this thread hasn't been closed. Seems a little confusing to me (and probably others) as to what threads are allowed to stay and which ones aren't ... if we are talking about multiple threads with the same topic (installing CWM)..?
Not questioning your authority, just would like a little clarification.
Click to expand...
Click to collapse
Well, there was a decent conversation going on, until someone had to crap on it. Threads that just ask "how to install this?"are shut down because 99% is covered in the stickys or are linked in the stickys.
This thread had a decent conversation and I was waiting to make sure the user got the info he needed and was successful. Its called helping out. Once that takes place, the thread can be closed because there is no longer any need for any more discussion.
Its not beneficial to just automatically close every thread that pops up in the General or Q&A section. Even Devs started out as noobs at one point, so we need to be somewhat courteous in the offchance that the next noob might turn out to be a great dev in the future. The OP didnt seem like your ordinary noob that just wanted to be spoonfed, so I gave him the benefit of a doubt and left this open.
Red5 said:
I think thats in the binary yellow triangle thread or the other CWM thread... both linked from the sticky.
Click to expand...
Click to collapse
yep...took me a few seconds to locate it after clicking the links in the sticky...
from: http://forum.xda-developers.com/showthread.php?t=1311081
3a.) How to Install a customized kernel containing ClockworkMod Recovery onto your Rooted phone from your phone, using Mobile Odin Lite or Mobile Odin Pro
Click to expand...
Click to collapse
The 5.0.2.3 version of ClockworkMod Recovery has a different button configuration. Home = select, Back = back, Power = back from submenu or toggle logo/main menu. The 5.0.2.7 version of ClockworkMod Recovery retains this button configuration but changes it to Power = select.
Click to expand...
Click to collapse
Red5 said:
Well, there was a decent conversation going on, until someone had to crap on it. Threads that just ask "how to install this?"are shut down because 99% is covered in the stickys or are linked in the stickys.
This thread had a decent conversation and I was waiting to make sure the user got the info he needed and was successful. Its called helping out. Once that takes place, the thread can be closed because there is no longer any need for any more discussion.
Its not beneficial to just automatically close every thread that pops up in the General or Q&A section. Even Devs started out as noobs at one point, so we need to be somewhat courteous in the offchance that the next noob might turn out to be a great dev in the future. The OP didnt seem like your ordinary noob that just wanted to be spoonfed, so I gave him the benefit of a doubt and left this open.
Click to expand...
Click to collapse
hey man, sorry if I crapped on this thread. It really wasn't my intention. The OP doesn't seem like your ordinary noob wanting to be spoonfed, but I was just taking notice at what he was trying to do is pretty basic and is more than covered. When I got my phone i rooted and installed CWM using the same threads here on XDA. Superoneclick rooted and followed codeworkx instructions to install his kernel for CWM. Granted I didn't have any poroblems, I get it that some people will.
Red5 said:
Its called helping out.
Click to expand...
Click to collapse
i asked an honest question and you give me sarcasm... come on man, I'm trying to be cool and just ask why.. that was all.
still unclear about what is ok and what is not..lol sorry man, but going back and reading the OP.. I'm not all too convinced he couldn't of figured this out without reading maybe a little bit more than he is admitting to. but whatever..
Coreym said:
i asked an honest question and you give me sarcasm... come on man, I'm trying to be cool and just ask why.. that was all.
Click to expand...
Click to collapse
There was no sarcasm, that was the reason why. I gave you an honest answer. I dont think every thread should be closed and as I said, this thread had a decent conversation in it. With that, I took a look at the sticky and realized that I can modify it to better point out the issue that the OP had. Had I just closed the thread I never would have stumbled onto that.
Again, there was no sarcasm in my comment. I just wanted to help out a newer member and left this open for him.
lol.. you can honestly say that you weren't being sarcastic when you told me "its called helping out"
..normally anytime you put "it's called.." in front of ANYTHING other than a question asking what something is, it's being sarcastic.. just sayin.
I posted this in Q&A and got zero responses so please no flaming about posting this there.......someone here knows because i got the info from here long ago. What changes in builds prop are done to "trick" the market? Nexus S in somewhere....just can't recall. TIA.
jmac9 said:
I posted this in Q&A and got zero responses so please no flaming about posting this there.......someone here knows because i got the info from here long ago. What changes in builds prop are done to "trick" the market? Nexus S in somewhere....just can't recall. TIA.
Click to expand...
Click to collapse
I would also like to know that. I run mine at 200 DPI but and thats a little too low for the full market access.
It also pisses me off when I post a question in the proper section and no one responds.
Then bump the post in the proper section. Don't knowingly and willfully break the rules.
Sent from my SCH-I500 using xda premium
whole lotta derpin goin on...
First: ask an intelligible question if you want a sufficient answer. I for one have no idea wtf the OP is asking exactly since he gave virtually no details.
Second: don't ask in development when you know you shouldn't! See first response....
Third: getting "pissed off" when no one answers is extremely lame and immature. Either no one knew the answer, or no one knew wtf you were talking about and didn't feel like playing 20 questions. See first response....
Sent from my Galaxy Nexus using XDA
I bought the app LCD Density modder pro, it comes with a modifed play store that reports your LCD Density at 240dpi to the market.
This fixes the "App not compatible errors"
I've been flashing a lot of ICS roms lately and I was sick of booting ICS, running LCD modded, installing the modded files, rebooting... etc.. etc.. so I made myself a CWM zip file that I just flash right after I flash a rom.
Even tho it's a personal file, I gave LCD Density modded all the credit. Although I know of other sources the show you how to do the mods yourself. I don't know if I'm allow to post the CWM zip file here for you guys to download, or even if you do in fact want to download it.
So, if it's ok for me to post the file, can a mod let me know? Please and thanks. I will post it in the main form for others and let you guys know where it's too.
Thanks
Maniac
jmac9 said:
I posted this in Q&A and got zero responses so please no flaming about posting this there.......someone here knows because i got the info from here long ago. What changes in builds prop are done to "trick" the market? Nexus S in somewhere....just can't recall. TIA.
Click to expand...
Click to collapse
MrManiacNF said:
I bought the app LCD Density modder pro, it comes with a modifed play store that reports your LCD Density at 240dpi to the market.
This fixes the "App not compatible errors"
I've been flashing a lot of ICS roms lately and I was sick of booting ICS, running LCD modded, installing the modded files, rebooting... etc.. etc.. so I made myself a CWM zip file that I just flash right after I flash a rom.
Even tho it's a personal file, I gave LCD Density modded all the credit. Although I know of other sources the show you how to do the mods yourself. I don't know if I'm allow to post the CWM zip file here for you guys to download, or even if you do in fact want to download it.
So, if it's ok for me to post the file, can a mod let me know? Please and thanks. I will post it in the main form for others and let you guys know where it's too.
Thanks
Maniac
Click to expand...
Click to collapse
Thank you for the response. I'll be sure to be more mature about my responses here. I wouldn't want anyone telling my 65 year old mother one me. I'd hate to have to explain all of that to her. I'll simply say puzzled from now on.
jt1134 said:
whole lotta derpin goin on...
First: ask an intelligible question if you want a sufficient answer. I for one have no idea wtf the OP is asking exactly since he gave virtually no details.
Second: don't ask in development when you know you shouldn't! See first response....
Third: getting "pissed off" when no one answers is extremely lame and immature. Either no one knew the answer, or no one knew wtf you were talking about and didn't feel like playing 20 questions. See first response....
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
Sorry for not explaining it better (being the OP). It sounded very clear inside my head when typing.......and that is a problem I know!
When trying to download some apps in the Market (Crackle TV app for example) I get the error "this app is not compatible with your phone". There was a "trick" posted awhile back that by changing something in the build prop using a text editor that would make the market think I had a newer modeled phone and thus could get the apps to download.
I had run for months with the market thinking I had a Nexus I believe (again, sorry I can't remember what I had changed it to) for a long time with no issues, but these latest builds of ICS just aren't playing nice with the Play Store.
I truly thought it was a common thing people were doing with the fascinate in order to have full access to the market/play store. Thus, I just condensed my question thinking it was going to get multiple hits and a quick answer. My mistake there again.
Hi, I have searched for an answer and haven't had any luck. I know that the latest S-Voice App supposedly can't be installed on something other than a device running ICS. Found Here: http://www.xda-developers.com/tag/samsung-galaxy-s-ii/
However, I can't seem to get it to work. It keeps giving me an error: There is a problem parsing the package.
I'm guessing I can't install it because I'm not running ICS. Can anyone confirm this? as it has been mentioned, that it does work. Found Here: http://www.xda-developers.com/android/samsung-s-voice-ripped-for-the-world-to-enjoy/
SGH-7989
VER: 2.3.6
T898UVLDE
2.6.35.11
GINGERBREAD.UVLDE
I'm still waiting for ICS to come out for T-Mobile...I have not Rooted my Device yet, don't really plan on it yet, but am considering it in the far future...lol
Homeuser66 said:
Hi, I have searched for an answer and haven't had any luck. I know that the latest S-Voice App supposedly can't be installed on something other than a device running ICS. Found Here: http://www.xda-developers.com/tag/samsung-galaxy-s-ii/
However, I can't seem to get it to work. It keeps giving me an error: There is a problem parsing the package.
I'm guessing I can't install it because I'm not running ICS. Can anyone confirm this? as it has been mentioned, that it does work. Found Here: http://www.xda-developers.com/android/samsung-s-voice-ripped-for-the-world-to-enjoy/
SGH-7989
VER: 2.3.6
T898UVLDE
2.6.35.11
GINGERBREAD.UVLDE
I'm still waiting for ICS to come out for T-Mobile...I have not Rooted my Device yet, don't really plan on it yet, but am considering it in the far future...lol
Click to expand...
Click to collapse
even on ICS its buggy since sgs2 framewrk differs with sgs3 i suppose
Sun90 said:
even on ICS its buggy since sgs2 framewrk differs with sgs3 i suppose
Click to expand...
Click to collapse
Thanks for your reply! I guess I'll wait for the ICS to officially come out for TM...
OP, you realize that as a T-mobile USA user, who owns an SGH-T989, you are actually in the wrong forum for your device, right? (I've also noticed you've posted in the Epic 4G Touch forums as well...)
I've already tried to tell you once that you're posting in the wrong forums. I guess it's up to you to realize what you're doing.
I'm not saying it as a matter of you're not allowed to post here, but if you request ports, mods, firmwares or kernels, and you post in a device forum that ISN'T yours, people will link you to solutions that will NOT work for your phone, and in all likelihood cause you no shortage of headaches if you decide to follow their instructions or install stuff they link you to.
Your device (SGH-T989) has VERY different hardware from the GT-I9100 and the Epic 4G Touch (SPH-D710).
But it's up if you want to continue to post in other device forums.
i used this -http://forum.xda-developers.com/showthread.php?t=1662959&page=12
and its working perfectly
and i think it wont work on 2.3.3
upgrade to ics and use go launcher ,, even i was thinking GB was bettter , but after using hydrogenics i dont feel like going back
ctomgee said:
OP, you realize that as a T-mobile USA user, who owns an SGH-T989, you are actually in the wrong forum for your device, right? (I've also noticed you've posted in the Epic 4G Touch forums as well...)
I've already tried to tell you once that you're posting in the wrong forums. I guess it's up to you to realize what you're doing.
I'm not saying it as a matter of you're not allowed to post here, but if you request ports, mods, firmwares or kernels, and you post in a device forum that ISN'T yours, people will link you to solutions that will NOT work for your phone, and in all likelihood cause you no shortage of headaches if you decide to follow their instructions or install stuff they link you to.
Your device (SGH-T989) has VERY different hardware from the GT-I9100 and the Epic 4G Touch (SPH-D710).
But it's up if you want to continue to post in other device forums.
Click to expand...
Click to collapse
So harsh on s simple mistake!!!
I didn't realize I was in the wrong forum...and I don't recall you ever telling me such in the past.. I don't visit here all that often, only for advice or to help someone else if I figure out something. I am new to Droids and this forum, probably only here a few months.
Homeuser66 said:
So harsh on s simple mistake!!!
I didn't realize I was in the wrong forum...and I don't recall you ever telling me such in the past.. I don't visit here all that often, only for advice or to help someone else if I figure out something. I am new to Droids and this forum, probably only here a few months.
Click to expand...
Click to collapse
Nothing harsh about it. I'm trying to save you on future headaches. You're seriously offended by me letting you know you're posting in the wrong device's forums?
ancilary said:
i used this -http://forum.xda-developers.com/showthread.php?t=1662959&page=12
and its working perfectly
and i think it wont work on 2.3.3
upgrade to ics and use go launcher ,, even i was thinking GB was bettter , but after using hydrogenics i dont feel like going back
Click to expand...
Click to collapse
I thank you for your input here, but apparently I have mistakenly posted in the wrong forum..and this won't work for me..but thanks again anyway!!
ctomgee said:
Nothing harsh about it. I'm trying to save you on future headaches. You're seriously offended by me letting you know you're posting in the wrong device's forums?
Click to expand...
Click to collapse
ok, Thanks!
Since you're a Sr member, can you delete this post or move it for me?
Homeuser66 said:
I thank you for your input here, but apparently I have mistakenly posted in the wrong forum..and this won't work for me..but thanks again anyway!!
Click to expand...
Click to collapse
Well, the reason it won't work for you is because the app only works on ICS, apparently. Not because of your device. (That link is to a post in the HTC Sensation forum)
You're still on Gingerbread.
Homeuser66 said:
ok, Thanks!
Since you're a Sr member, can you delete this post or move it for me?
Click to expand...
Click to collapse
Senior Member doesn't give me that kind of power. I'm not a moderator...
Just to add... Samsung has pulled the plug! It won't work any more.
What about the other version that's been hacked ???
jje
atifsh said:
Just to add... Samsung has pulled the plug! It won't work any more.
Click to expand...
Click to collapse
Probably to get you to buy the SGIII.....IMO
thanx i will try it soon
Samsung and Vlingo are blocking server side requests that come from any device other than the SIII
http://www.slashgear.com/samsung-and-vlingo-blocking-unofficial-s-voice-use-21229117/
Hope this helps
Working Svoice
A new hacked version of svoice have been released. I tried it on my GS2 running ICS Resurrection 1.9.1 and it is working with no issue. It bypass verification by Samsung. Just copy the zip file to your SDCard and flash using CWM.
Here is the link to download.
http://forum.xda-developers.com/showthread.php?t=1667046
Hello,
While changing my front glass screen of my S3, i've damaged the capacitive button interface, i've already ordered one new for replacement, but until there is there any way to have the buttons on screen like Nexus (NavBar) in a Touchwiz JB ROM? NOT like an AOKP or CM based rom.. I know that those have that option like paranoidrom.
Regards.
Check the first rule of XDA. Hint: you just broke it.
Your thread is also in the wrong section. Questions go in the QA
You're right.. i've posted on the wrong section...
About searching i've already did and didn't found anything for a International touchwiz JB ROM, can you post here an answer? or you just broke the rule 7 about this one?
Regards.
http://lmgtfy.com/?q=i9300+on+screen+buttons+stock
took me 3 seconds
Well.. i got to admit, you're very good using google.. but i still didn't found anything on those results that works on a JB touchwiz, not CM10 based ROM, did you?
Rule N1
"Use one of our search functions before posting, whether you have a question or something new to share, it's very likely someone already asked that question or shared that news."
OUR=Google.. oh my bad, i've used XDA search engine, maybe its the same engine.. I dont know.
I Really apreciate your help, maybe i didn't said that i've tried everything on those results previously and that they didn't worked for me, it causes BootLoop's, so you assumed that i didn't searched anything, may be i didn't melted my brain searching but i've searched alot, im a member since 2008 and this is my 1st thread started by me, so i didnt started the thread without having a little fight with search options.
Thank you for you help.
Glebun said:
http://lmgtfy.com/?q=i9300+on+screen+buttons+stock
took me 3 seconds
Click to expand...
Click to collapse
Overture said:
Well.. i got to admit, you're very good using google.. but i still didn't found anything on those results that works on a JB touchwiz, not CM10 based ROM, did you?
.
Click to expand...
Click to collapse
I did, it was the first link
EDIT: and here you go:
http://forum.xda-developers.com/sitesearch.php?q=i9300 on screen buttons stock
using XDA search engine