Hello together,
I have a problem with bluetooth connections:
I'm using a HTC Desire, rooted and flashed with a ROM from Alex-V Android Version 2.3.3 with the 2.6.35.8 Kernel.
I have two bluetooth devices:
MM100 Stereo Headset from Sennheiser
BT-Version: 2.0 + EDR
Protocolls: HSP, HFP, A2ADP, AVRCP
and the Hands free car kit Parrot MK6000
BT-Version: 1.2
Protocolls: HSP, HFP, AADP, AVRCP
I can pair both devices with my Desire and the latest paired device would connect automatically to audiosystem for media and telefone when switched on.
The problem is, that the first paired device would not connect automatically to my desire and when it is connected manually it would only connect to the audiosystem for media not telefone.
I can't force it to connect with audiosystem for telefone. I checked and un-checked the check-boxes for both connections in every combination :-(
Remark: I don't want to connect both devices at the same time. I know that this is not working ;-)
With the original HTC Rom I doesn't had this problem. Both devices would pair and connect perfect.
Does anyone has the same problem, or perhaps a solution for this problem?
Pudl
Hello,
is there no one outside with two Bluetooth Hands free devices?
Does anyone has the same problem?
Pudl
Related
Has anyone succeeded in a combination of these two with the Blue Angel device ?
If so, is the audio from the gps software also routed to your car stereo ? What bluetooth protocol would support this ? The parrot carkit supports both the Bluetooth Headset and Handsfree profile.
I think in the end, this would be the best future proof solution : buy a standard pda mount for the Blue Angel and share the parrot carkit between all bluetooth devices present in the car.
Any comments would be welcome !
Kristof
Ok,
I did a little bit of bluetooth research : in order to have MP3 playback using bluetooth, the device must support the bluetooth A2DP (Advanced Audio Distribution profile) profile. The A2DP profile was included in BT 1.2 spec.
I've read the thread on the HP MP3 headphones, and there they have a patch that will install the A2DP profile, though I'm not certain whether it is a HP specific implementation.
Some other interesting threads on this subject :
http://forum.xda-developers.com/viewtopic.php?t=12549
http://forum.xda-developers.com/viewtopic.php?t=10747
http://forum.xda-developers.com/viewtopic.php?t=7679
So I expect that sooner or later there is going to be a firmware upgrade or bluetooth stack upgrade from Broadcomm that includes this profile.
The next step would be the parrot : for what I know, it does not support the A2DP profile. I asked their sales department if they have any future products / firmware upgrades that will support this profile.
So once you enter your car, you would have to enable 3 (!) bluetooth connections :
Bluetooth headset profile -> mobile phone handsfree communication
Bluetooth A2DP profile -> regular audio coming from the device
Bluetooth Serial profile -> connection to gps
With all the bluetooth instabilities with the current protocol stack, I wonder if these three at the same time would ever be realistic. Does bluetooth support this kind of bandwith anyways ?
I have a Orange M2000 with the Parrott CK3300 (it has built in bluetooth GPS)- The bluetooth handsfree works fine as long as you update the handsfree kit to the latest firmware. Also you have to pair as a Windows CE device for it to connect whenever you get in the car.
The bluetooth GPS does work but I find I usually have to do a soft-reset and then launch tom tom which then connects to the GPS without a problem.
You do loose the GPS connection when you make or recieve a phone call, I'm not sure if this is a limitation of the handsfree kit or the M2000 though, I've only had if for 2 weeks so I'm still experimenting with it!
Hey people,
I tried connecting my Jabra320 up to my Touch HD the other day. The headset should support A2DP for stereo bluetooth, which worked with my old Touch Dual, however, whenever I try adding the headset to my HD I can only see the hands free profile.
Anyone had any problems with A2DP or any ideas how to fix this?
I was thinking about getting a Sony Ericsson headset, but don't want to commit to the investment until I know that I can use the A2DP profile...
I'm using Dutty's v2.5 rom and the v1.12 radio.
Same problem with new duttys roms. It shows me both wireless stereo and handsfree but when i try only to connect A2DP it disconnects. Worked fine on older duttys roms.
I have Jabra 620s
tunppi said:
Same problem with new duttys roms. It shows me both wireless stereo and handsfree but when i try only to connect A2DP it disconnects. Worked fine on older duttys roms.
I have Jabra 620s
Click to expand...
Click to collapse
You're getting a little further than I - I domn't see the 'Wireless Stereo' option at-all. Well I believe Dutty is releasing a new ROM soon. Hopefully it'll be fixed then. If not I'll mention the problem when it comes out - hopefully Dutty or someone will find a fix.
Thanks though for confirming I'm not the only one with this problem!
Hope you guys has fixed your problem. if not, let me tell you how to fix it.
I had the same issue before. now it works.
1. make sure your headset is power off and delete the connection on your cellphone.
2. connect your charger to the headset for 4 seconds, then disconnect it.
3. repeat step2 4 times.
4. after that, your headset will be reset. then, reconnect to your cell phone and you will see wireless stereo function enabled.
What I have discovered on my A2DP headphones (Philips SHB7100) is that when I power them on it will automatically connect but only with wireless headset (phone calls only) functionality.
What I have to do is go to the touchflo settings tab, select Menu> Bluetooth Devices and disconnect then reconnect the headset. Once I do that it connects for both A2DP and phone calls.
I also have a Jabra "Dogtag" headset and it ALWAYS reconnects with both automatically unlike the Philips set, so I suspect this also has something to do with the headset itself and not just the OS/ROM.
Hello, I just bought a Xperia S and I did not reach in connection it to my Built-in bluetooth system (a parrot built-in kit in a Citroen). The pjone can see the system but I'm not able to make the system pairing.
I already had difficulties in the past with an X10 but it was linked to Android 1.6 and with my Samsung Galaxy S2 under Cyanogen7. I have no issue to conenct with Nokia E6, iPhone 4 or Android 2.3.X smartphones (Samsung Galaxy S2, Samsung Galaxy S, HTC Desire,...).
I think that it could come from the BT stack used by Sony or from their Android adaptation and I don't think I would be able to pair the system till an update could be released or perhaps with ICS.
Does somebody has the same difficulty or a solution ?
Best regards
Try to reset the bluetooth in your car.
Sent from my Sony Xperia S-LT26i
I had the same issue with my bluetooth IO player.First time when I added it after that it would not connect. Turned bluetooth off and on and automatically connected. Might be worth restarting your phone. If the phone can add it then it should be able to connect to it.
Hello, I do,'t know where to reset my car BT as it is a built-in. One solution could be to remove the fuse....
It is not a question of connexion as I'm not able to pair the BT device and the Xperia.
I have no issue with all the other phones !!!
I have a 2009 Ford Mondeo and my Xperia S paired with the integrated bluetooth unit without any issues. Can browse phone book and call log without any issues and obviously make/receive calls.
Hi Guys,
Im having a real bluetooth issue with my SXS and Merc...I can connect and pair fine, however randomly the phone keeps disconnecting.. ive had this working fine with a Iphone4s and lumia 800 so i dont think its the MB side of things...can anyone shed some light on this?
Can the rezound connect to multiple bluetooth devices at one time?
I'm running CM10.1, and I can't seem to be able to connect to both my wireless speaker and keyboard at the same time.. I've never tried to use more than one device at a time until today, and I just assumed it would work..
Yes, but I don't believe multiples of the same BT profile. My car only supports BT headset (no music) I bought an Auris to pipe in BT music through the aux jack. The auris has two profiles, one for headset and one for music. I disable the headset one and it connects to both the Auris and my car at the same time just fine.
Long story short, 'yes it can'
Hello everybody
Please apologize if this question might have been answered already. However, I haven't found a thread that dealing with this exact question.
I was wondering if anybody ever had a OBD2 Bluetooth dongle and headset connected at the same time. Is this possible?
I'm planning to use an OBD2 Bluetooth dongle together with Torque Pro to retrieve engine data on my HTC one. At the same time I don't want to sacrifice my car's Bluetooth headset, also connected to my HTC one.
So while displaying the engine details I still want to be able to answer calls using my headset.
Has anybody ever dealt with such a scenario? Did it work?
Thanks very much any hint and / or info!
[SOLVED] [Q]: Bluetooth OBD2 & headset simultaneously
To whoever it may concern, I was able to have both Bluetooth devices connected simultaneously, the car's hands-free and OBD2 dongle. Could even listen to music on my device through Bluetooth.
HTC ONE with Android 4.2.2
BMW Hands-Free Bluetooth integration
OBD2 Bluetooth dongle used with Torque Pro
Hope this helps people with similar concerns.
THX