Hello guys!
First of all, I wanna tel you that I've tried everything in my knowledge to fix this issue, but I had no success so far...
My phone keeps freezing in the lock screen for no reason...
Please watch this video I made for better understanding:
I've tried flashing all kinds of ROM and the only one I don't get this issue is ICS XXLPB, which got me thinking that it must be due to a downgrade issue as I have previously flashed KP8...
I've tried flashing the complete XXKI3 ROM WITH PIT file and Re-Partition ticked, but it didn't solve this....
I'm really out of options here...
It started with LA2 all of sudden... I thought it was a system thing, so I wiped everything with no luck... then tried all kinds of ROM...
This is ODIN's Log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> factoryfs.img
<ID:0/003> data.img
<ID:0/003> hidden.img
<ID:0/003> cache.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
The phone also doesn't sleep if you let it sit...
EDIT: Just flashed CM9 and it works without any problem!! WTF is going on??! Gingerbread ROMs got this problem but ICS ROMs don't!
Is there any way to pretty much format the whole phone? So it doesn't hold any information? Start from scratch??
Any suggestion guys? Please, I already ran out of options here...
you could try super wipe
forum.xda-developers.com/showthread.php?t=1367825
its in the download bit of the first thread
do u have a backup b4 , u can long press shut down and boot to recovery , restore your backup
do a hard reset,maybe itll help
no wipe worked... system, cache, data...
i think it's not hardware as ICS ROMs work normally... i really don't get what' going on...
Marcio_Bianco said:
no wipe worked... system, cache, data...
i think it's not hardware as ICS ROMs work normally... i really don't get what' going on...
Click to expand...
Click to collapse
I read somewhere that this problem came from "enable hw acceleration" under developer options on ics leaked roms.
May be that u enable it on ics? It's weird because I understood that u have this issue on gb...
I would try if it was my phone to flash ics and enable and disable that option then reflash GB....
Claudio67 said:
I read somewhere that this problem came from "enable hw acceleration" under developer options on ics leaked roms.
May be that u enable it on ics? It's weird because I understood that u have this issue on gb...
I would try if it was my phone to flash ics and enable and disable that option then reflash GB....
Click to expand...
Click to collapse
hmmm I don't know about that... Why would an ICS setting remains active in GB ROMs? Even after wiping all data, system, and flashing a new ROM with PIT and Re-partition ticked?
I've been noticing that the phone won't turn of the screen if you let it sit doing nothing... doesn't matter if you set 15s, 30s, 1 minute.... the screen doesn't turn off by itself... it just dims the brightness and stay that way...
T
Marcio_Bianco said:
hmmm I don't know about that... Why would an ICS setting remains active in GB ROMs? Even after wiping all data, system, and flashing a new ROM with PIT and Re-partition ticked?
I've been noticing that the phone won't turn of the screen if you let it sit doing nothing... doesn't matter if you set 15s, 30s, 1 minute.... the screen doesn't turn off by itself... it just dims the brightness and stay that way...
Click to expand...
Click to collapse
Agree with you 100%. So it's hw related? If it is hw why with ics it works fine?
Did u format system&data from cwm->mounts?
Another question is if u did enable hw acceleration in ics. If u didn't do this forget my doubt...
Claudio67 said:
T
Agree with you 100%. So it's hw related? If it is hw why with ics it works fine?
Did u format system&data from cwm->mounts?
Another question is if u did enable hw acceleration in ics. If u didn't do this forget my doubt...
Click to expand...
Click to collapse
Yes I did.. data, system, cache and dalvik from CWM...
If it was HW issue, it wouldn't work in ICS aswell... that's why I'm so pissed off...
I'm not at home right now, so when I get back, I'll try flashing XXLBP again and checking the Development section...
I thought of some firmware issue, or driver... like a firmware that works fine in ICS but no in GB, maybe screen driver or GPU... I've flashed Speedmod, Syiah and NEAK's kernels... but don't know if that is related...
Ok... tried flashing SuperWipe, flashing XXLBP again and checking Development settings (everything was OK), tried wiping data, system, cache then flashing KI3 with PIT and Re-partition... NOTHING worked... seriously, there's no way to complete format this phone... everytime it retains stuff from last ROMs...
I give up... I'm taking it to a Samsung repair center tomorrow... hopefully they don't take too long with it...
Marcio_Bianco said:
Ok... tried flashing SuperWipe, flashing XXLBP again and checking Development settings (everything was OK), tried wiping data, system, cache then flashing KI3 with PIT and Re-partition... NOTHING worked... seriously, there's no way to complete format this phone... everytime it retains stuff from last ROMs...
I give up... I'm taking it to a Samsung repair center tomorrow... hopefully they don't take too long with it...
Click to expand...
Click to collapse
S..t i'm very sorry and i don't want to waste your time but i remembered to read something about kernel cleaner script
http://forum.xda-developers.com/showthread.php?t=1363738
I think this is last chance... good luck!
Sent from my LG-P920 using XDA App
Claudio67 said:
S..t i'm very sorry and i don't want to waste your time but i remembered to read something about kernel cleaner script
http://forum.xda-developers.com/showthread.php?t=1363738
I think this is last chance... good luck!
Sent from my LG-P920 using XDA App
Click to expand...
Click to collapse
I appreciate your help but it didn't work...
I've flashed this kernel cleaner then flashed a normal CF-ROOT and no deal...
Thank you, but i don't see any other option... I'll take it to a repair center...
Just came back from Samsung's Repair Center.... showed them the problem... Apparentely it all went fine... Now I just have to wait untill tomorrow...
They said this: "It's probably just a software issue, we'll have to re-program it".... I hope they don't use Odin 'cause it won't work... Hopefully they have a JTAG for that...
Related
I tried flashing US boot loader and I receive this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> param.lfs
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I received the file from this thread. http://forum.xda-developers.com/showthread.php?t=1531850
did you try turning the device on and off again?
Try redownloading the file you're trying to flash, sometimes they get corrupted.
Why are you trying to flash bootloaders anyway? Is your player seriously screwed up?
Ill try that. The player boots straight into recovery, that's my primary issue.
dktfoster said:
Ill try that. The player boots straight into recovery, that's my primary issue.
Click to expand...
Click to collapse
If you're getting recovery your bootloaders should be fine. Probably just need to reflash kernel/rom.
I've done that and it still boots straight into recovery
Are you sure you have the right kernel and rom? Maybe try a different one from the dev section?
I have the 4.0 us, I'm 100% sure I have the right rom. I might just send it back to Samsung. This whole problem started after flashing over to Klins Klassic and doing a factory wipe.
Try a different rom for your device.. it shouldn't be irreversibly screwed up.
Sent from my SGP5
dktfoster said:
I have the 4.0 us, I'm 100% sure I have the right rom. I might just send it back to Samsung. This whole problem started after flashing over to Klins Klassic and doing a factory wipe.
Click to expand...
Click to collapse
Redownload the Us restore pack. Ensure that re-partition is checked.
YP-GP70CWY
Hello,
I just encountered the same problem with my SGP5. It got stuck and reboots to the Android Recovery. I was trying to install a tweak on it after rooting and it just happened. I could go to kies no problem. But the main is, I can't get the OK/Power button to confirm so that I can wipe everything. Vol+- works but no confirmation. What should I do?
It is really hard when someone is on a learning curve. This is totally different for me.
Thank you very much for the devs and help.
....................................
I thought I had bricked it. I made it working again by reinstalling a rom.
thank you anyway.
I had one of my players that kept booting into recovery after resurrection from hard brick. Flashing a different rom fixed it. Flash a rom with CWM and use CWM to factory reset the device and retry. It took me a couple of tries, but I managed to get it to boot correctly.
cvcduty, I have read your little guide to restore the Galaxy Player on AdamOutlers' thread but it still won't work.. If you can please help me out, I'd be very grateful/appreciative. Thanks!
Hello XDAdevelopers,
My GSII wont turn on after i auto reboot or auto reboot into recovery.
So i installed the stock ICS rom via ODIN, everything went fine. but when the installation finished, the phone stay dead, it wont reboot unless i remove the battery, wait a few seconds and put it in again.
So i booted into download mode, flashed the Root BOX JB, with syah via ODIN, everything fine. But it wont boot again.
I removed the battery, wait few seconds, place it again, then it turns on.
Every time i reboot my phone or turn it off, it wont turn on unless i remove the battery.
Do you guys know why this is happening ?
Already flashed stock AOKP, CM, STOCK and now trying with ROOT BOX, always the same problem.
Update1: Flashed the stock ICS ROM and Kernel trough Odin and still cant boot without removing the battery =/
Update 2: Flashed with PIT and Re-partition checked, still the same =/, what else should i try ?
update 3: Flashed the stock XXLPH kernel after the PIT, still the same =/
Exact Same problem
How can u get out of this.....
I have also the same problem
I went to samsung care & they just want to change my motherboard ...
but i don't think that motherboard have any fault.
plz help mee........ if u got any..
syama35 said:
How can u get out of this.....
I have also the same problem
I went to samsung care & they just want to change my motherboard ...
but i don't think that motherboard have any fault.
plz help mee........ if u got any..
Click to expand...
Click to collapse
Heyy,
well, i don't know what else to do, i'll keep searching and trying, any update ill post in here.
Trying flashing a full stock firmware.. do a factory reset too..
Sent from my GT-I9300 using xda premium
saywhatt said:
Trying flashing a full stock firmware.. do a factory reset too..
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
i did it before the PIT. gonna try it now.
Give some solution
Sorry saywhatts .........................:angel:
I didn't get u ...............
plz give any solution if any...?????
syama35 said:
Sorry saywhatts .........................:angel:
I didn't get u ...............
plz give any solution if any...?????
Click to expand...
Click to collapse
Okay, go to sammobile.com and download a firmware there.. flash it via odin
Sent from my GT-I9300 using xda premium
Glowing_Potato said:
i did it before the PIT. gonna try it now.
Click to expand...
Click to collapse
no deal, =/
I'm trying to flash a bootloader now,
Btw, the phone should auto boot when the installation finish right ? its not happening here...
I get the firmware but not working dear.........:angel:
Hey is the Bootloader require???????
hey guys,
The first thing i did was to flash a stock ICS rom from sammobile.
the flash was successful but the phone didn't auto reboot and the problem persist.
I just trying the android 2.3.3
lets see what happen
syama35 said:
I just trying the android 2.3.3
lets see what happen
Click to expand...
Click to collapse
Ok, let me know if you did it :cyclops:
Glowing_Potato said:
Ok, let me know if you did it :cyclops:
Click to expand...
Click to collapse
I think 2.3.3 have a lots of different file so .. i just stuck in it what to put where in odin...(there is files like kernel, code ,modem,EFS & Multi....)
Help me..
syama35 said:
I think 2.3.3 have a lots of different file so .. i just stuck in it what to put where in odin...(there is files like kernel, code ,modem,EFS & Multi....)
Help me..
Click to expand...
Click to collapse
CODE -> PDA
MODEM -> PHONE
CSC -> CSC
after this, flash the kernel on PDA
got it ?
Yes i get u ....... & thanks..
what about the auto reboot check box.. is it checked or after kernel ...........
syama35 said:
Yes i get u ....... & thanks..
what about the auto reboot check box.. is it checked or after kernel ...........
Click to expand...
Click to collapse
the auto reboot and F.Reset Time needs to be checked.
just flashed a single file firmwara from samMobile, the odin process was successful, but the problem persist.
odin log:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100VJLP7_I9100UHLPF_I9100ZTOLP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> factoryfs.img
<ID:0/009> zImage
<ID:0/009> hidden.img
<ID:0/009> cache.img
<ID:0/009> modem.bin
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
after this the phone still dead, no auto reboot. cant manually reboot either.
Glowing_Potato said:
the auto reboot and F.Reset Time needs to be checked.[/QUOTE
where to put this EFS_I9100XWKE8_CL214845_REV02_user_low_ship.tar file ..............
---------- Post added at 09:07 PM ---------- Previous post was at 09:03 PM ----------
I already did the single file of 4.0.3 & 4.0.4 UK EDITION..
THATS NOT WORK
i just didn't get what about the EFS file to do
Click to expand...
Click to collapse
syama35 said:
Glowing_Potato said:
the auto reboot and F.Reset Time needs to be checked.[/QUOTE
where to put this EFS_I9100XWKE8_CL214845_REV02_user_low_ship.tar file ..............
Click to expand...
Click to collapse
i think you dont need to flash this one.
either way, its go on PDA.
Click to expand...
Click to collapse
don't know what else to try.
So my unrooted, Jellybean SG2 decided to crap out on me. It's stuck in the dread boot loop! OH NOES! I got a new SG2, so I don't care if my SG2 what software is put on it. I just want my precious data (music, photos, videos). Some said it couldn't be done, but I found this thread on here that said otherwise.
Making use of SiyahKernal, it should be possible to mount my SG2 to my laptop. I decided to Odin this puppy up. I wanted to go by the tutorial the other thread posted, so I tried using the Jellybean T-Mobile rom (which my SG2 was using). I used the ROM, for my device, from Samsung Updates. I made sure to restart my PC, shut down any processes by Kies, etc, etc before starting Odin. When I went to flash the ROM, Odin froze for a good 15 minutes. I decided that nothing was going to happen and unplugged my S2.
So, here I am, stuck with the message, "firmware upgrade encountered an issue in Samsung Galaxy S2." I, somehow, made the problem worse. I just want my data. As you can see, I'm a total noob with this stuff. Please help!
Get a stock rom from Samfirmware, AndroidFirmwares.net or Samsung-Updates.com, flash it with Odin following instructions in thread stickied near top of Q&A titled 'Flash stock firmware...'. Clean slate. You shouldn't lose your stuff, but there are never guarantees with this or even that this will definitely fix your phone & enable it to boot normally (it shouldn't & it should though).
MistahBungle said:
Get a stock rom from Samfirmware, AndroidFirmwares.net or Samsung-Updates.com, flash it with Odin following instructions in thread stickied near top of Q&A titled 'Flash stock firmware...'. Clean slate. You shouldn't lose your stuff, but there are never guarantees with this or even that this will definitely fix your phone & enable it to boot normally (it shouldn't & it should though).
Click to expand...
Click to collapse
Thanks. I'll give it a try and post my results.
Ricequakes said:
Thanks. I'll give it a try and post my results.
Click to expand...
Click to collapse
well loosing data is something that i've experienced alot of times (my case i9100g)
i guess flashing the clean stock rom will help out.. but recently when my friend messed up his s2 i9100 i flashed the stock through odin which made him all the data its uncertain whether you loose your data or not.. fingers crossed flash the stock you may or may not loose data
thuva06 said:
well loosing data is something that i've experienced alot of times (my case i9100g)
i guess flashing the clean stock rom will help out.. but recently when my friend messed up his s2 i9100 i flashed the stock through odin which made him all the data its uncertain whether you loose your data or not.. fingers crossed flash the stock you may or may not loose data
Click to expand...
Click to collapse
Let's hope. If only it would even flash. Just tried and this is what I got on Odin:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T989UVMC6_T989TMB_T989UVMC6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> amss.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
And what it said on my SG2:
nand_write: flash write fail
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s2-tmobile
Post in correct forum
S4 victim
theunderling said:
http://forum.xda-developers.com/galaxy-s2-tmobile
Post in correct forum
S4 victim
Click to expand...
Click to collapse
I'm a bigger noob than I thought. Sorry, guys.
Mod Edit
Thread closed
[OP] found correct forum
malybru
Forum Moderator
Hey guys. I've run into an issue with my GT-i9300 International version just yesterday at it's racking my brains up.
Here's the lowdown about the device
It's the international GTi9300 (3G version)
It runs ArchiDroid v2.1.4 ROM
This rom was installed a year ago and gave no issues what so ever.
Just yesterday the device did not boot up. i Managed to get it into philz recovery to see whats the problem. i get the error message that it couldnt mount /data, /system & etc.
I have posted the screenshots. I've tried backing up, mounting and even factory wiping but it does not work
I have a feeling the eMMC flash storage has failed and therefore i have a hardware failure :crying:
I hope this is not the case since i have lots of important data on this phone (it's my secondary phone)
Have a look at the screens. lemme know the fate of my S3, whether it is possible to recover this device or not
p.s: I've checked all over the net. i've only come across the /efs not mounting issue. not what im going through
Naweed Reza said:
Hey guys. I've run into an issue with my GT-i9300 International version just yesterday at it's racking my brains up.
Here's the lowdown about the device
It's the international GTi9300 (3G version)
It runs ArchiDroid v2.1.4 ROM
This rom was installed a year ago and gave no issues what so ever.
Just yesterday the device did not boot up. i Managed to get it into philz recovery to see whats the problem. i get the error message that it couldnt mount /data, /system & etc.
I have posted the screenshots. I've tried backing up, mounting and even factory wiping but it does not work
I have a feeling the eMMC flash storage has failed and therefore i have a hardware failure :crying:
I hope this is not the case since i have lots of important data on this phone (it's my secondary phone)
Have a look at the screens. lemme know the fate of my S3, whether it is possible to recover this device or not
p.s: I've checked all over the net. i've only come across the /efs not mounting issue. not what im going through
Click to expand...
Click to collapse
Have you flashed stock firmware with Odin yet? This is the first thing you need to do to see if Odin works or gives errors....don't forget to factory reset after flashing. I'm afraid you may have to live with losing your data if you can't back it up in recovery.
tallman43 said:
Have you flashed stock firmware with Odin yet? This is the first thing you need to do to see if Odin works or gives errors....don't forget to factory reset after flashing. I'm afraid you may have to live with losing your data if you can't back it up in recovery.
Click to expand...
Click to collapse
i'll try flashing the stock rom via odin
Yeah, now i gave up on caring about the data. i really need the phone to work tho
i'll get back on the progress
@tallman43
Status report.
I tried flashing a stock rom which is on 4.3
It says NAND write failure. screenshot uploaded.
So i'm guessing my eMMC is corrupt or has failed :crying:
I did more research and found out that i could repartition it using a .pit file
This thread shows the relevant pit files
http://forum.xda-developers.com/showthread.php?p=30547929#post30547929
GT-I9300_mx_20120220.pit is for the 16 gb s3.
i'll flash with with the ROM
Lemme know if this is alright :good:
Naweed Reza said:
@tallman43
Status report.
I tried flashing a stock rom which is on 4.3
It says NAND write failure. screenshot uploaded.
So i'm guessing my eMMC is corrupt or has failed :crying:
I did more research and found out that i could repartition it using a .pit file
This thread shows the relevant pit files
http://forum.xda-developers.com/showthread.php?p=30547929#post30547929
GT-I9300_mx_20120220.pit is for the 16 gb s3.
i'll flash with with the ROM
Lemme know if this is alright :good:
Click to expand...
Click to collapse
Be careful the thread is for verizon you can't flash any pit files from there be 100% sure the pit file is for S3 international try looking here this is the rescue firmware >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << there is a pit file in the 4.1.2 download but you need to flash the 4.3 in the link to stop efs issues. But to be honest it doesn't look too good if this fails I recommend a service repair.
tallman43 said:
Have you flashed stock firmware with Odin yet? This is the first thing you need to do to see if Odin works or gives errors....don't forget to factory reset after flashing. I'm afraid you may have to live with losing your data if you can't back it up in recovery.
Click to expand...
Click to collapse
Tried flashing the pit. I got the following error messages on odin
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK6_I9300OXAGMK6_I9300XXUGMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
tallman43 said:
Be careful the thread is for verizon you can't flash any pit files from there be 100% sure the pit file is for S3 international try looking here this is the rescue firmware >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << there is a pit file in the 4.1.2 download but you need to flash the 4.3 in the link to stop efs issues. But to be honest it doesn't look too good if this fails I recommend a service repair.
Click to expand...
Click to collapse
I had downloaded the pit from another site. it was the international one
But i'll try your link. i just saw your reply
I'm downloading the 4.3 GT-I9300XXUGMJ9_KOR_MULTI_FACTORY package
Naweed Reza said:
Tried flashing the pit. I got the following error messages on odin
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK6_I9300OXAGMK6_I9300XXUGMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You need to flash everything at once pit file and rom look at the link I sent you but it looks like you need a new motherboard:crying:
tallman43 said:
You need to flash everything at once pit file and rom look at the link I sent you but it looks like you need a new motherboard:crying:
Click to expand...
Click to collapse
Oh maan
Last resort is the link you gave. i'm downloading the 4.3 package. will put everything and flash at once. if this doest work. rip i guess :/
I never did anything. I installed the custom rom a year ago and let the phone be. didnt bother tweaking or adding to the custom rom
Then all of a sudden it doesnt boot
Naweed Reza said:
@tallman43
Status report.
I tried flashing a stock rom which is on 4.3
It says NAND write failure. screenshot uploaded.
So i'm guessing my eMMC is corrupt or has failed :crying:
I did more research and found out that i could repartition it using a .pit file
This thread shows the relevant pit files
http://forum.xda-developers.com/showthread.php?p=30547929#post30547929
GT-I9300_mx_20120220.pit is for the 16 gb s3.
i'll flash with with the ROM
Lemme know if this is alright :good:
Click to expand...
Click to collapse
I have a feeling the eMMC flash storage has failed and therefore i have a hardware failure
This is true
So flashing all 4 stock files (including pit) via odin turned out to be a Fail
I guess the eMMC is not functional resulting in a hardware failure
Thanks for the help @tallman43
If anyone else has suggestions, feel free to post them here
Dz-Horse said:
I have a feeling the eMMC flash storage has failed and therefore i have a hardware failure
This is true
Click to expand...
Click to collapse
Has this happened to your S3?
I havent tinkered with anything and this happens
I just installed a ROm and left it for a year
Oh well
Yes it happened to me same problem
I'll cut to the chase, I own a Verizon Samsung Galexy S4.
It's rooted, and I used Eclipse rom, but I wanted to update to Lollipop.
So I flashed the stock SCH-I545NC5 4.4.2 and everything was fine.
Now, I used software update and it would download, restart, and give me the "failed to download/update" etc. error ( I have figured out later that this was due to me still being rooted.)
Anyway, I then tried to use Kies3 and everything was going great.
It restarted annnnd boom, I get the firmware failed to update screen with the exclamation point telling me to use emergency repair. So I did. Aaand that fails every time too... so I did some searching and finally found the SCH-I545NC5 factory rom tar.md5 file for Odin.
I have all of the drivers and everything, and I have used Odin3 before to update this phone without trouble.
But now whenever I try to flash stock it gives me this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
It prints all of that out in a second or less...
I then got the .pit and tried that, it will stay at getting pit for mapping for ~5 minutes or more.
And that's where I am now... I'm at my wits end, can anyone help?
Many people say that using a different USB port or a different cable might work.
GDReaper said:
Many people say that using a different USB port or a different cable might work.
Click to expand...
Click to collapse
Well, that didn't seem to work :/
Does anyone know if I would be able to take this into a Verizon store to get help? or if they would refuse due to root?
yeronix said:
Well, that didn't seem to work :/
Does anyone know if I would be able to take this into a Verizon store to get help? or if they would refuse due to root?
Click to expand...
Click to collapse
If you want your warranty rights, then they might refuse it.
GDReaper said:
If you want your warranty rights, then they might refuse it.
Click to expand...
Click to collapse
Well I don't have a warranty.. I have heard they can flash there to fix(?) stuff... would that work, would they even do that?
yeronix said:
Well I don't have a warranty.. I have heard they can flash there to fix(?) stuff... would that work, would they even do that?
Click to expand...
Click to collapse
Well, since you're paying, they will certainly try, I guess.
GDReaper said:
Well, since you're paying, they will certainly try, I guess.
Click to expand...
Click to collapse
Well alright then.
Do you know of anything else I could try? I've tried a different cable, other ports, and another computer at this point.
yeronix said:
Well alright then.
Do you know of anything else I could try? I've tried a different cable, other ports, and another computer at this point.
Click to expand...
Click to collapse
To be honest I am not very familiar with Odin problems. I just suggested what I saw on other threads.
I also stumbled upon a similar error when I tried to flash a stock rom.
Well good news is it's working! I had been flashing NC5/NK1 thinking that's what I needed. Not the case! I tried flashing the latest GOC1 and it worked!!!!
I also uninstalled Kies3 and disables my antivirus, I think that played a large part in it.
Yes, Kies messes with Odin if they both run at the same time.