Related
TIRED OF THE PLAIN MOTOROLA BOOT IMAGE WHEN YOUR PHOTON FIRST POWERS ON? TIRED OF STARING AT THE RED M LOGO WHEN IN FASTBOOT MODE?
WAIT NO MORE!!
I AM STARTING A THREAD FOR BOOT LOGOS FOR THE PHOTON. I WILL BE POSTING LOGOs AS I MAKE THEM. IF YOU HAVE AN IMAGE YOU WOULD LIKE AS A LOGO, PLEASE PM ME OR POST ON HERE AND I WILL CONVERT IT FOR YOU!
I WILL BE KEEPING UP WITH THIS THREAD AS MUCH AS POSSIBLE. I WILL UPDATE REQUESTS AS I GET THEM...OR AT LEAST ONCE A DAY. IF YOU WANT AN IMAGE AND YOU POST IT IN THE THREAD, PLEASE BE RESPECTFUL OF OTHERS. IF ITS AN IMAGE THAT YOU DO NOT WANT REPOSTED FOR OTHERS TO USE, PLEASE PM ME!
LETS DO THIS!
HOW TO
HERE IS THE LINK TO WHERE I GOT ALL MY INFO AND FILES NEEDED TO DO ALL OF THIS. ITS BEEN ALOT OF FUN AND ALOT OF TRIAL AND ERROR!!
BOOT LOGOs FOR THE MOTO ATRIX (exact same process for the Photon)
A FEW THINGS TO REMEMBER / BE AWARE OF:
THIS IS NOT A BOOT ANIMATION - JUST THE IMAGE PRIOR TO THE ANIMATION STARTING.
IF YOU ATTEMPT YOUR OWN AND ITS NOT RIGHT, IT WILL JUST BOOT INTO BINARY TEXT. DONT FREAK OUT!!!
THESE WILL BE FOR COMMAND PROMPT ONLY. ATTACHED IS THE ZIP WITHOUT THE LOGO.BIN FILE. SIMPLY PLACE THE LOGO.BIN IN THE ROOT OF THIS ZIP FILE AND PLACE ON YOUR SDCARD AND BOOT INTO RECOVERY AND USE CWM TO INSTALL! **THANK TO damageplan1223 FOR THE ZIP** (I have not tested this zip to see if it works. I always use cmd)
I WILL GIVE AS CLOSE TO STEP-BY-STEP INSTRUCTIONS AS POSSIBLE ON HOW TO INSTALL THE IMAGE ONCE ITS CONVERTED. SO HERE IS GOES:
UNZIP THE FASTBOOT FILE AND PLACE ON YOUR C DRIVE (OR WHEREVER YOU WANT IT)
IF ITS NOT ALREADY, MAKE SURE THE NAME OF THE FILE IS LOGO.BIN
PLACE THE LOGO.BIN FILE IN YOUR FASTBOOT FOLDER
USING COMMAND PROMPT (OR EMULATOR) CD TO YOUR FASTBOOT FOLDER: (example - cd C:/fastboot)
ONCE IN FASTBOOT DIRECTORY, BOOT INTO FASTBOOT ON YOUR DEVICE AND PLUG INTO TO COMPUTER (vol down and power...once fastboot appears, vol up)
TYPE moto-fastboot flash logo logo.bin (depending on if its home or work computer, I have to leave out the moto-)(It will tell you that the command wont work if you use the moto-fastboot. If it doesn just put fastboot and leave out the moto-)
AT THIS POINT IT SHOULD WRITE THE FILE TO YOUR DEVICE
THEN moto-fastboot reboot (same as other command, may have to leave out moto-)
AT THAT POINT, YOUR DEVICE SHOULD REBOOT AND BAM...NEW LOGO!!!
SO THATS ABOUT IT. JUST EXTRACT THE LOGO.BIN FROM THE DOWNLOAD AND FOLLOW THE ABOVE STEPS!!
GOOD LUCK!!!
Shattered Glass
iPhone Killer
MotoPhone
XDA QR Code - really takes you to xda-developers.com when scanned!
NC TarHeels - For the NC fans out there!
Abstract - Just something a little different
Black and White - MY FAV SO FAR!!
Apple Sniper - THE BEST!!
Here are a few more. Hope you enjoy! These are a little more abstract/nontraditional!!
Superman
Hex
Alien
3D Android
3D Glass
you could try this as a test
if you want to flash a logo thru CWM recovery thiz is my flashable zip file that u can use to as a boot logo or you could extract an change the logo.bin for your own logo. http://dl.dropbox.com/u/20954860/Moto-Boot-logo.zip
damageplan1223 said:
if you want to flash a logo thru CWM recovery thiz is my flashable zip file that u can use to as a boot logo or you could extract an change the logo.bin for your own logo. http://dl.dropbox.com/u/20954860/Moto-Boot-logo.zip
Click to expand...
Click to collapse
Much appreciated!!! If you dont care...Im going to remove the logo.bin and post just the zip in the OP so others can use it if they dont want to use command prompt.
...and I LOVE the Tegra 2 stuff...especially the red one!!
Google evo never forget splash screen. I would LOVE this on the Photon.
Edit
http://forum.xda-developers.com/showthread.php?t=766465
There it is dowant.jpg
Sent from my MB855 using xda premium
[email protected] said:
Google evo never forget splash screen. I would LOVE this on the Photon.
Edit
http://forum.xda-developers.com/showthread.php?t=766465
There it is dowant.jpg
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
If this is what you are talking about...here you go!! If you want me to change the HTC EVO to Motorola Photon or something like that, let me know!
EVO NEVER FORGET
Anyways to just remove the sprint boot up flash sequence?
Nice work
Sent from my MB855 using XDA Premium App
No problem
Sent from my MB855 using XDA Premium App
thanks OP I nostalgia'd so hard when i rebooted my phone.
[email protected] said:
thanks OP I nostalgia'd so hard when i rebooted my phone.
Click to expand...
Click to collapse
Haha...no prob. Glad I could help!!!
Sent from my MB855 using XDA App
Aquos1 said:
Anyways to just remove the sprint boot up flash sequence?
Click to expand...
Click to collapse
Give me some more info about your device:
Rooted?
Unlocked?
ROM?
...will make a difference!
I would like the animation from the droid 3 personally with or without sound
rooted not unlocked
Can i get this please?
here is a link to the picture ...
http://t3.gstatic.com/images?q=tbn:ANd9GcRCZNcvxJzmVZDMxKPnDQWRpmdSI_DcqtjcGdf9JJ7o1jEPR6t7z5XsCg
zikronix said:
I would like the animation from the droid 3 personally with or without sound
rooted not unlocked
Click to expand...
Click to collapse
Unfortunately I dont do much with boot animations...just the boot image that you see right before the boot animation. Here is a link to someone that does the animations and a pretty good directive on how to do it yourself.
You can PM Bandage as well to get it done a little quicker!
iSaint said:
Can i get this please?
here is a link to the picture ...
http://t3.gstatic.com/images?q=tbn:ANd9GcRCZNcvxJzmVZDMxKPnDQWRpmdSI_DcqtjcGdf9JJ7o1jEPR6t7z5XsCg
Click to expand...
Click to collapse
Here ya go. Because the orginal image is so small...I made it as big as I could without alot of distortion. Hope its ok!
Link for download
Thanks so much bro !
Here's the one I just made for myself, based off just the Android logo.
[BOOT LOGO + ANIMATION] Moto Logos (Multi-Color, Blur, & MOTOX) - Updated 10/12/13
Just sharing some work I did on aligning some boot logos and animations using OEM Moto logos. All of these were converted from animations originaly from Motorola.
These are CWM flashable, and they change the Boot Logo and the Boot Annimation so that they flow into one another.
These are designed to work with GB ROM's, I have only tested them with NottachTrix and CSROM. If you want to use them with other ROM's then extract the bootanimation.zip file from within these and copy it over tot he right /system folder
!! NEW !! Moto X Boot Animation (revolving world scape ... kind of thing). I had to mod the animation due to our Atrix's capability, but ti still looks pretty cool
Link: http://www.mediafire.com/?gt5oy7yi0pf0431
Grey Version of the OEM Logo
Link: http://www.mediafire.com/?u90939pr9jy6g2n
Blue OEM Logo
Link: http://www.mediafire.com/?6vbga4dtr7u8gr6
Red Version of the OEM Logo
Link: http://www.mediafire.com/?9t9deo3gvxofxs9
Embers Version of the OEM Logo (sorry for the small size on this one, orignal source was small to begin with)
http://www.mediafire.com/?imy2sryeymkdci6
Violet Version of the OEM Logo (sorry for the small size on this one, orignal source was small to begin with)
http://www.mediafire.com/?6lky4bjali4dkgt
Pink Version of the OEM Logo
http://www.mediafire.com/?c4x47oyjjxqz2jf
Blur Version of the Logo form the Defy
Link: http://www.mediafire.com/?3jmbgweuv5160u5
To install:
1.) boot to recovery
2.) install from zip
3.) reboot
Thanks to thewarhawk for his guide on how to do all this (http://forum.xda-developers.com/showthread.php?t=1187337&highlight=boot)
These are all great. Thanks again for sharing!
(Unfortunately, I used up my "THANKS" for today. I'll be back tomorrow.)
bernardwilkes3 said:
Just sharing some work I did on aligning some boot logos and animations using OEM Moto logos.
Click to expand...
Click to collapse
Thanks so much, they work fine.
Regards
Really like the blue logo but the "Blur" bit kills it.
nh777 said:
Really like the blue logo but the "Blur" bit kills it.
Click to expand...
Click to collapse
Yea I agree, but that was in the OEM animation. I was thinking of shortening the animation and trying to eliminate the Blur word, but that is a ton of editing of a lot of individual files.
bernardwilkes3 said:
Yea I agree, but that was in the OEM animation. I was thinking of shortening the animation and trying to eliminate the Blur word, but that is a ton of editing of a lot of individual files.
Click to expand...
Click to collapse
Sorry to hear that. It'd be great to have a version in line with the red and grey.
For what it's worth, I'm on grey now and really dig it. If you manage to find a way to load the blue (or find it elsewhere), post it on here.
bernardwilkes3 said:
Yea I agree, but that was in the OEM animation. I was thinking of shortening the animation and trying to eliminate the Blur word, but that is a ton of editing of a lot of individual files.
Click to expand...
Click to collapse
I can help you editing the images
Regards
gustrick said:
I can help you editing the images
Regards
Click to expand...
Click to collapse
Ok I'll PM you a link with the images and you can have at it ....
I am working on a new Moto Animation based on a clip I found of the logo, it is a nice blue and I think it is just what a few of you (and me) are looking for .... almost done with it and hope to post it later tonight.
New BLUE OEM Logo and Animation Posted
Awesome, awesome, awesome work!
Problem Flashing
I have problem when flashing this .zip file with CWM 5.8 and it said "installation aborted" "Status 7"
femtofecmi said:
I have problem when flashing this .zip file with CWM 5.8 and it said "installation aborted" "Status 7"
Click to expand...
Click to collapse
Which one did you download? Were you able to flash any of them or is it a specific problem with just one of them?
They only works in a blur rom
I try it in CM7 and shows the same error
Saludos
gustrick said:
They only works in a blur rom
I try it in CM7 and shows the same error
Saludos
Click to expand...
Click to collapse
Yep, I built them for NottachTrix4G and CSROM (should work with other Blur based ROMs). However, they could be converted to work with CM7 if you wanted to.
bernardwilkes3 said:
Yep, I built them for NottachTrix4G and CSROM (should work with other Blur based ROMs). However, they could be converted to work with CM7 if you wanted to.
Click to expand...
Click to collapse
I want them but just the animation. I dont want to replace the boot logo
femtofecmi said:
I want them but just the animation. I dont want to replace the boot logo
Click to expand...
Click to collapse
Can't you just extract bootanimation.zip and copy it to your phone?
How to update
bernardwilkes3 said:
Just sharing some work I did on aligning some boot logos and animations using OEM Moto logos.
These are CWM flashable, and they change the Boot Logo and the Boot Annimation so that they flow into one another.
These are designed to work with GB ROM's, I have only tested them with upndwn4par's CSROM and NottachTrix.
Grey Version of the OEM Logo
Link: http://www.mediafire.com/?u90939pr9jy6g2n
!! NEW !! Blue OEM Logo
Link: http://www.mediafire.com/?6vbga4dtr7u8gr6
Red Version of the OEM Logo
Link: http://www.mediafire.com/?9t9deo3gvxofxs9
Blur Version of the Logo form the Defy
Link: http://www.mediafire.com/?3jmbgweuv5160u5
To install:
1.) boot to recovery
2.) install from zip
3.) reboot
Thanks to thewarhawk for his guide on how to do all this (http://forum.xda-developers.com/showthread.php?t=1187337&highlight=boot)
Click to expand...
Click to collapse
Can u help with steps and procedure to change the boot logo animation. I have downloaded it.
ravilov said:
Can't you just extract bootanimation.zip and copy it to your phone?
Click to expand...
Click to collapse
i replaced bootanimation.zip in /system/media and set permission by es file explorer but it didn't work. black screen appear in stead of the animation
vigremrajesh said:
Can u help with steps and procedure to change the boot logo animation. I have downloaded it.
Click to expand...
Click to collapse
You flash it through recovery like any other flashable ZIP.
femtofecmi said:
i replaced bootanimation.zip in /system/media and set permission by es file explorer but it didn't work. black screen appear in stead of the animation
Click to expand...
Click to collapse
Try putting it in /data/local/bootanimation.zip.
Although, putting it in /system/media should work too, dunno why it doesn't. Are you sure you did it right?
femtofecmi said:
i replaced bootanimation.zip in /system/media and set permission by es file explorer but it didn't work. black screen appear in stead of the animation
Click to expand...
Click to collapse
The fact that you get a blackscreen tells me that you put the file in the right place. That leads me to believe there is something wrong with the bootanimation.zip file you are using.
Did you by chance unzip the bootanimation.zip file itself? And then rezip it before moving it to the Atrix? If so, did you happen to rezip the bootanimation file normaly? I ask because I did that a one point and caused the very same issue.
A bootanimation.zip must be made without compression, or set as "store" not "archive" when Zip'ing. If you answered yes to all of this then the solution is to get a bootanmiation.zip that is compressed correctly and move that to your /system/media. You can do that one of two ways,
1.) redownload my files, unzip the flashable file to get the bootanimation, but do NOT unzip the bootanimation file itself. Copy that bootanimation to your phone
or
2.) rezip the bootanimation file without compression, in 7zip you do this by setting the the pression to "store"
quick how to -->use splashflasher1.0 to convert 1080x1920 image then flash it with fastboot flash splash1 custom.img while in bootloader
you will need the eng hboot found here
1. Find your image and resize it to 1080 (width) by 1920 (length). (gimp is a good free tool for this)
2. Download splash flasher from here (and give the guy a thanks)
3. Follow the instructions by placing your newly created image in the folder then running the tool (note: make a copy of the image and put it in the folder as the process deletes the original)
4. Place the newly created custom.img in your working adb dir.
5. reboot to bootloader and send the command fastboot flash splash1 custom.img
i've attached the first one that i made. Make your own and share...
Edit: Check out the regawmod thread to remove the red disclaimer at the bottom or get get one that is already done here
note: if i've stepped on anyone's toes please let me know and i'll remove my post
[Splash]Red HTC Quietly Rooted
Cool. I just made a red HTC quietly rooted splash with this tool in a couple minutes.
Re: [How to] make your own splash screen for the DNA
What happened to the old school splash screen flash where u name it PL83200 and put it on the root if your sd card boot bootloader and press up on the volume rocker.
Sent from ny ViperDNA
Thanks! I'll use this to make some for the one xl
Re: [How to] make your own splash screen for the DNA
jonah1234 said:
What happened to the old school splash screen flash where u name it PL83200 and put it on the root if your sd card boot bootloader and press up on the volume rocker.
Sent from ny ViperDNA
Click to expand...
Click to collapse
Doesn't work that way with us because there is no sdcard to search. I've been emailing back n forth with the developer who made the flash image gui app to see if splash.img can be included in flashing with his app. Hopefully he does that for us...
Sent from my HTC6435LVW using Xparent Cyan Tapatalk 2
Re: [How to] make your own splash screen for the DNA
Stoney 666 said:
Doesn't work that way with us because there is no sdcard to search. I've been emailing back n forth with the developer who made the flash image gui app to see if splash.img can be included in flashing with his app. Hopefully he does that for us...
Sent from my HTC6435LVW using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Right right forgot about that. Silly HTC
Sent from ny ViperDNA
Some people like to add their name and phone number to the splash, then if someone takes it they can't figure out how to remove it. Here are some basic minimalistic jpg's that you can add text to before you convert it. I've also converted them if no text is wanted...
if you are using the custom.img don't forget to rename it to custom.img or adjust your adb command.
edit: i fixed the android circuit, sorry about the mixup
...a few more...
... a few more...
jonno95 said:
... a few more...
Click to expand...
Click to collapse
Would you mind making me an all black splash? :good::laugh:
Credit for design goes to yousefak, I just edited size and added text.
Argumentation said:
Would you mind making me an all black splash? :good::laugh:
Click to expand...
Click to collapse
here is all black
Re: [How to] make your own splash screen for the DNA
Some of these make great wallpapers as well
Sent from my HTC6435LVW using xda app-developers app
will be posting more, started converting live wallpapers I have made into these.
call this the urban garden
jonno95 said:
Some people like to add their name and phone number to the splash, then if someone takes it they can't figure out how to remove it. Here are some basic minimalistic jpg's that you can add text to before you convert it. I've also converted them if no text is wanted...
if you are using the custom.img don't forget to rename it to custom.img or adjust your adb command.
Click to expand...
Click to collapse
the android curciut img downloaded but shown as captain amerika
minjiet said:
the android curciut img downloaded but shown as captain amerika
Click to expand...
Click to collapse
I fixed it. Thanks for letting me know.
Stoney 666 said:
Doesn't work that way with us because there is no sdcard to search. I've been emailing back n forth with the developer who made the flash image gui app to see if splash.img can be included in flashing with his app. Hopefully he does that for us...
Sent from my HTC6435LVW using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
that would be way cool if we could do it through the flash image gui. i'd probably pay for the market app then.
Well that takes care of that.. I was just working to figure out how this was done. Thanks OP for letting the cat out of the bag..
I thought I'd contribute as well... just finished making this one up.
how to create logo.bin .... from...my choice of image?
i'm on ubuntu ... with gimp installed.....
dchatterjee172 said:
how to create logo.bin .... from...my choice of image?
i'm on ubuntu ... with gimp installed.....
Click to expand...
Click to collapse
There is a detailed guide on droidforums.
In short, it goes like.
Open the base logo with PS or gimp.
Paste your logo over it.
Merge it.
(This part is tricky). You have to change the colors.Don't remember the values exactly. Google it.
However, there's a glitch. Using a custom logo also removes the battery charging logo(when powered off).
Tapatalk with RAZR HD
This is for flashable zip "Boot Logos". Firstly I must say that all credit and thanks go to @GokulNC for his "Splash Image Tool" which makes it possible to create the splash.img" files. As we all know the A 7 is a testy and finicky device and therefore I must make the point that I am not responsible for any problems that occur by your use of these boot logos. Having said that my device is an A2017U and I have successfully installed each of the logos that I publish.
Important points to consider.....
(1) These logos only replace the initial ZTE logo they do not replace the unlocked bootloader screen.
(2) Sure as eggs come at Easter if you try to flash these to the partition occupied by the warning
unlocked notice then you will probably brick your device (I can speak with authority on this point
having done it!)
(3) Flash these through custom recovery (i.e. TWRP).
Unfortunately because it is only replacing the initial boot logo the display time is very short and is soon overtaken by the unlocked bootloader screen. The only way you can see it for a longer period is when you reboot into TWRP when it stays on the screen longer.
The attached zip files are the flashable zips and the attached jpg thumbnails show you what they look like. I've posted an initial 5 screens (2 for the Justice League and 3 which I have called ZTE for the sake of calling them something). Hopefully someone will come up with a way of getting rid of that lousy unlocked screen so that we can see a decent logo.
I really want to make my own custom one. Can you help me?
Bumthimble said:
Can you help me?
Click to expand...
Click to collapse
I suggest you search XDA for posts by GokulNC there you will find a recent post in which he describes using his script "Splash Image Tool".
I saw your post in another thread ..... To start with you need a png graphic file measuring 1440x2560 ..... It must be png can't be jpg or bmp or tiff or gif. This is all presuming you are using ZTE Axon 7 phone.
metpolds said:
I suggest you search XDA for posts by GokulNC there you will find a recent post in which he describes using his script "Splash Image Tool".
I saw your post in another thread ..... To start with you need a png graphic file measuring 1440x2560 ..... It must be png can't be jpg or bmp or tiff or gif. This is all presuming you are using ZTE Axon 7 phone.
Click to expand...
Click to collapse
Thank you. I am using axon 7. I will do it
Bumthimble said:
Thank you. I am using axon 7. I will do it
Click to expand...
Click to collapse
@Bumthimble ... This will save you searching for it, just download the "splash-maker".
EDIT ..... @Bumthimble really gave you a bum steer (sorry about the pun) with this reference, I've replaced it and tried the new one and it goes where I wanted.
https://forum.xda-developers.com/axon-7/how-to/guide-how-to-create-custom-splash-t3472194
Here are a couple more.
What was written in Post#1 still applies.
I tried to avoid splashing text all over but if anyone desperately wants text on one of them post here and I'll see what I can do.
Another 3 same blurb as before.
@nujackk I really appreciate your "thanks", to me it means that someone is gracious enough to show their liking for what I do.
We all should show our appreciation more. I really appreciate folks like you who allow me to have choices, please keep up the work
nujackk said:
I really appreciate folks like you who allow me to have choices
Click to expand...
Click to collapse
Thanks guys I'm encouraged to keep up the search for graphics that become our boot logos.
Here are 3 more, all Justice League this time.
A couple more.
Just a quick note ..... I've made a logo with a "Ghost Rider" theme but because of it's nature it doesn't fit well alone, to complement it I have made a Ghost Rider Animation that the logo suits. Both the logo and the animation can be found in the thread I have previously created in "Themes and Mods" named "Flashable zip Boot Animations".
Should anyone just want a logo then let me know and I will see what I can do.
TWRP flashable "Android Eats Apple" splash screen.
I made one. It's copy/pasted because I have no artistic skill. I think I laid out a pretty good one though. I found high resolution .png files. Looks nice and crisp.
@Doc Ames ... Nice one. :highfive: