Related
for months everything was quit well with my SGS2. Ich flashed a lot (CM7, CM9, ...) and bevor every new version i have done a nandroid backup via CWM.
Yesterday the backup stopped in the middle of the data partition (yes, i have waited very long to be sure it was not just a big file). I bootet the phone and tried again. Same result. Different file but approximately the same position.
I think it could possibly be a issue with the filesystem.... Bute how could i fix it? Or are there other possibilities?
thx and bye, Jens
riker187 said:
for months everything was quit well with my SGS2. Ich flashed a lot (CM7, CM9, ...) and bevor every new version i have done a nandroid backup via CWM.
Yesterday the backup stopped in the middle of the data partition (yes, i have waited very long to be sure it was not just a big file). I bootet the phone and tried again. Same result. Different file but approximately the same position.
I think it could possibly be a issue with the filesystem.... Bute how could i fix it? Or are there other possibilities?
thx and bye, Jens
Click to expand...
Click to collapse
download Rom Manager from Market and flash clockwork from there and back-up rom from Rom manager....this worked for me when my earlier clockworkmode gave me a treble...
zaheedahmed said:
download Rom Manager from Market and flash clockwork from there and back-up rom from Rom manager....this worked for me when my earlier clockworkmode gave me a treble...
Click to expand...
Click to collapse
I am using Rom Manager and this was where it fails in the first place... After that i tried directly in recovery and it fails also
riker187 said:
I am using Rom Manager and this was where it fails in the first place... After that i tried directly in recovery and it fails also
Click to expand...
Click to collapse
Rom manager is not 100% compatible wit sgs2, will not work for everybody. If you can boot in downloade mode flash stock ics rom through odin, then root with cf root kernel.
078gregory said:
Rom manager is not 100% compatible wit sgs2, will not work for everybody. If you can boot in downloade mode flash stock ics rom through odin, then root with cf root kernel.
Click to expand...
Click to collapse
As i explained, the problem occurs also if i am using the recovery mode. And if it freezes in the data partition i don´t think it would be solvable flashing a new ROM.... Maybe i try to wipe the data partition. or should i format it? Is there a difference?
regards, Jens
formating the data partition solved the problem!
Hello guys,
I've got an X10mini (E10) (second hand but should not branded)
I'm actually stucked in a bootloop. It happened after I tried flashing the miniCM7 ROM with CWM.
I've tried the wipe data/factory reset frome CWM but nothing happened
I've tried the recovery option from my previous backup
Nothing
I've tried reflashing the Stock Rom (found in one of Xda-developers thread)
And I still got a bootloop (with the Sony Ericson logo)
Could anyone help me? =)
Gahu said:
Hello guys,
I've got an X10mini (E10) (second hand but should not branded)
I'm actually stucked in a bootloop. It happened after I tried flashing the miniCM7 ROM with CWM.
I've tried the wipe data/factory reset frome CWM but nothing happened
I've tried the recovery option from my previous backup
Nothing
I've tried reflashing the Stock Rom (found in one of Xda-developers thread)
And I still got a bootloop (with the Sony Ericson logo)
Could anyone help me? =)
Click to expand...
Click to collapse
Why don't you try a repair with SEUS or PC Companion, that will get you back to original.
You said you did wipe data/factory reset, but did you wipe cache and dalvick-cache too (second one in advanced menu in CWM), because they're filled with useless junk from your old ROM, causing many errors.
SmG67 said:
Why don't you try a repair with SEUS or PC Companion, that will get you back to original.
You said you did wipe data/factory reset, but did you wipe cache and dalvick-cache too (second one in advanced menu in CWM), because they're filled with useless junk from your old ROM, causing many errors.
Click to expand...
Click to collapse
I can't find the SEUS or PCC repair option
And yes I did wipe the dalvick cache but still nothing happens
Gahu said:
I can't find the SEUS or PCC repair option
And yes I did wipe the dalvick cache but still nothing happens
Click to expand...
Click to collapse
Disconnect your phone from your pc
Start PC Companion
Choose Support Zone
It will try to find an update for your phone, but since it's disconnected it can't
It will offer a Repair link
Follow the instructions from there.
SmG67 said:
Disconnect your phone from your pc
Start PC Companion
Choose Support Zone
It will try to find an update for your phone, but since it's disconnected it can't
It will offer a Repair link
Follow the instructions from there.
Click to expand...
Click to collapse
The fact is that the last version of PC Companion doesn't have that Support Zone anymore
and downloading the previous version doesn't help cause it force you to upgrade the software ...
Gahu said:
The fact is that the last version of PC Companion doesn't have that Support Zone anymore
and downloading the previous version doesn't help cause it force you to upgrade the software ...
Click to expand...
Click to collapse
I've updated mine whenever it requested it and in mine it is still there...
SmG67 said:
I've updated mine whenever it requested it and in mine it is still there...
Click to expand...
Click to collapse
Okay I think I might be cursed or something ... Cause this option never show with my PCC ...
I only got a "blank" window even if I restart with the phone unpluged
Gahu said:
Okay I think I might be cursed or something ... Cause this option never show with my PCC ...
I only got a "blank" window even if I restart with the phone unpluged
Click to expand...
Click to collapse
I see, mine looks more like in the screenshot below
You've got an unlocked bootloader right?
I can get you an original SE Firmware to flash with flashtool if you're interested... just let me know...
SmG67 said:
I see, mine looks more like in the screenshot below
You've got an unlocked bootloader right?
I can get you an original SE Firmware to flash with flashtool if you're interested... just let me know...
Click to expand...
Click to collapse
Yeah I unlocked the bootloader with flashtool (the log said it was done properly)
And it would be nice to get the original SE firmware =D (I tried one and it didn't solve anything but still ... what choice do I got?)
Gahu said:
Yeah I unlocked the bootloader with flashtool (the log said it was done properly)
And it would be nice to get the original SE firmware =D (I tried one and it didn't solve anything but still ... what choice do I got?)
Click to expand...
Click to collapse
You don't have much choice i suppose, i'll give you the download link in a pm
Just download it, put it in the firmwares subfolder where flashtool is installed and flash it to your phone, it will take a while because it flashes everything (kernel and rom), but i hope it will help you
SmG67 said:
You don't have much choice i suppose, i'll give you the download link in a pm
Just download it, put it in the firmwares subfolder where flashtool is installed and flash it to your phone, it will take a while because it flashes everything (kernel and rom), but i hope it will help you
Click to expand...
Click to collapse
OH yeah =)
So long to the Bootloop =D Thanks =)
Gahu said:
OH yeah =)
So long to the Bootloop =D Thanks =)
Click to expand...
Click to collapse
Good luck flashing m8 Keep it lying around, you can always get out of trouble
SmG67 said:
Good luck flashing m8 Keep it lying around, you can always get out of trouble
Click to expand...
Click to collapse
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Kubaz said:
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Click to expand...
Click to collapse
Connect your phone to your PC using the usb-cable
Boot into CWm (you say you can)
Go into Mounts and Storage
Choose USB-Mass storage
You should be able to access the sd-card from your pc now and copy the ROM and maybe Gapps.
SmG67 said:
Connect your phone to your PC using the usb-cable
Boot into CWm (you say you can)
Go into Mounts and Storage
Choose USB-Mass storage
You should be able to access the sd-card from your pc now and copy the ROM and maybe Gapps.
Click to expand...
Click to collapse
Worked like a charm!. Thank you very much. I went for mini cm 7 as it seemed the most stable. thanks for your help.
just need to get the sd card to mount and I am all set. Do you have any ideas why I can't get it to mount?
Kubaz said:
Worked like a charm!. Thank you very much. I went for mini cm 7 as it seemed the most stable. thanks for your help.
just need to get the sd card to mount and I am all set. Do you have any ideas why I can't get it to mount?
Click to expand...
Click to collapse
I don't know, apparently it worked fine when you connected it to your pc...
Maybe you could pull all your files off the sd-card to your pc, boot into cwm and format the sd-card (in mounts and storage), then reboot into the rom.
If that's all successful, put the files back on your sd-card.
SmG67 said:
I don't know, apparently it worked fine when you connected it to your pc...
Maybe you could pull all your files off the sd-card to your pc, boot into cwm and format the sd-card (in mounts and storage), then reboot into the rom.
If that's all successful, put the files back on your sd-card.
Click to expand...
Click to collapse
What would happen if I select "apply update from sd card". This is the second option under CWM recovery.
Should I restore from Nanadroid. i s this necessary?
Could partitioning the sd card help? Thanks again!
Kubaz said:
What would happen if I select "apply update from sd card". This is the second option under CWM recovery.
Should I restore from Nanadroid. i s this necessary?
Could partitioning the sd card help? Thanks again!
Click to expand...
Click to collapse
The 'Apply Update.zip' does exactly the same thing as the 'Install zip from sd-card', but the first option only works for zip-files named 'update.zip' in the root of your sd-card, the second option will let you browse the sd-card and select a zip-file with any name. The second option is the one you use to install your ROM.
Restoring from nandroid, just fills your internal phone-memory with the old stuff you had in there, it won't affect your sd-card, other than that it reads the nandroid from that sd-card.
Your sd-card needs to be formatted with the fat-filesystem to work properly, so partitioning or not makes not much of a difference, only that the available space for your stuff (music, photo's, etc.) is less because the other partitions take up space too.
If you can flash your ROM in CWM from sd-card I don't really see any problem with your sd-card.
worked like a charm. many thanks!
Kubaz said:
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Click to expand...
Click to collapse
"Alternatively, on start up, I can get into cwm recovery".
I have the exact same problem though i cant get into clockworkmod recovery. May i know how you got into cwm recovery? Any help is appreciated.
Thanks!
Yo guys,
I got a S2 I-9100 and I flashed the new Siyah Kernel onto it via Heimdall. The Problem is that if i boot it, the Samsung logo and the Siyah logo appears but afterwards the screen turns black.
Its propably not turned off cos I can't restart it without removing the battery.
Download and Recovery still works. I tried to use the wipe data/factory reset, but that didn't worked.. actually nothing happened.
Also tried to flash the Original Kernel (KF3) but the Phone gets stucked in boot on the Samsung logo..
Would be nice if someone could help me
zzzEE said:
Yo guys,
I got a S2 I-9100 and I flashed the new Siyah Kernel onto it via Heimdall. The Problem is that if i boot it, the Samsung logo and the Siyah logo appears but afterwards the screen turns black.
Its propably not turned off cos I can't restart it without removing the battery.
Download and Recovery still works. I tried to use the wipe data/factory reset, but that didn't worked.. actually nothing happened.
Also tried to flash the Original Kernel (KF3) but the Phone gets stucked in boot on the Samsung logo..
Would be nice if someone could help me
Click to expand...
Click to collapse
You may have a problem with rom not supporting your kernel. Get formatted system,cache, data and put dorimanx latest kernel onto your phone via recovery. From this point you should be able to flash any CM rom you can get. If it still persist, go for odin and lastest Samsung Official
cortex69 said:
You may have a problem with rom not supporting your kernel. Get formatted system,cache, data and put dorimanx latest kernel onto your phone via recovery. From this point you should be able to flash any CM rom you can get. If it still persist, go for odin and lastest Samsung Official
Click to expand...
Click to collapse
Thanks for ur quick answer, I did format onto system,cache and data through recovery - mounts and storage, I guess thats right but when i want to install the dorimanx kernel it just says: can't open "....".zip (bad) and aborts the installation.
zzzEE said:
Thanks for ur quick answer, I did format onto system,cache and data through recovery - mounts and storage, I guess thats right but when i want to install the dorimanx kernel it just says: can't open "....".zip (bad) and aborts the installation.
Click to expand...
Click to collapse
What code did it show 0 or 7?
KingOfDope said:
What code did it show 0 or 7?
Click to expand...
Click to collapse
Neither one of them, just (bad)
well the only reason is that it didn't downloaded good, so redownload... or try with another sd card. or try to put the zip/rom in your internall sd. by going into recovery>format & mount>mount usb storage and now connect to your pc and drop the zip/rom into your sd card or internal sd :highfive:
KingOfDope said:
well the only reason is that it didn't downloaded good, so redownload... or try with another sd card. or try to put the zip/rom in your internall sd. by going into recovery>format & mount>mount usb storage and now connect to your pc and drop the zip/rom into your sd card or internal sd :highfive:
Click to expand...
Click to collapse
uhm thanks redownload worked, phone is running again thanks
zzzEE said:
uhm thanks redownload worked, phone is running again thanks
Click to expand...
Click to collapse
Have fun ! I recommend you to get yourself USB jig and get onto WIP CM11 thread http://forum.xda-developers.com/showthread.php?t=2523604
I think that dev needs some people to get everything tested, even though it's not even booting. But he shared a way to get log from the device at 7th page of the thread !
zzzEE said:
uhm thanks redownload worked, phone is running again thanks
Click to expand...
Click to collapse
Yess, hhehehe thanks button would help me :angel: :victory: :highfive:
have fun with your phone! :fingers-crossed:
Hello
I've accidentally flashed a wrong cwm-recovery (meant for some other phone)
After the installation I've rebooted into recovery and it booted the one I already had (that's when I understood it's the wrong one)
Then I've tried to reboot back to my rom but it got stuck on the rom's loading screen
Tried to flash a new rom after using gs2RomWipe
Tried to restore from a nandroid backup
all of them gave the same result.. stuck on the loading screen
Now to my question...
If I flash a stock Rom via Odin.. will it be enough? will I be able to reroot and use my phone normally again?
Or is there an easier way maybe?
i did the same today..
all the time bootloop..
flashing same rom that i was using did not helped..
flashing some other rom helped but cant call cause phone dont see simcard..
flashing some other roms like cyanogenmod also stuck my on bootloop..
I am pretty sure you have to flash via odin.
Update...
I've flashed a stock rom via Odin but it went into a bootloop
when I've entered recovery it said E:failed to mount efs (invalid argument)
so far I've found no way to make the phone work
please help
PureMind0 said:
Update...
I've flashed a stock rom via Odin but it went into a bootloop
when I've entered recovery it said E:failed to mount efs (invalid argument)
so far I've found no way to make the phone work
please help
Click to expand...
Click to collapse
If you are using i9100.
Then flash philz kernel via odin.
Then boot into recovery.
MOUNT usb storage
Place any rom zip in the root of ex sd card
Flash it with full wipe
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
If you are using i9100.
Then flash philz kernel via odin.
Then boot into recovery.
MOUNT usb storage
Place any rom zip in the root of ex sd card
Flash it with full wipe
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
It doesn't work...
stock rom wont start, restored nandroid wont start, philz + new rom wont start
I have efs backup as tar.gz but didn't find a normal guide on how to use it without the phone working (i.e adb)
I'm not even sure if the problem is because of the efs missing or not but it seems to be the problem
PureMind0 said:
It doesn't work...
stock rom wont start, restored nandroid wont start, philz + new rom wont start
I have efs backup as tar.gz but didn't find a normal guide on how to use it without the phone working (i.e adb)
Click to expand...
Click to collapse
Ok.
Lets make it clear.
After flashing philz which rom did u flash?.
U should have not got any problem.
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Ok.
Lets make it clear.
After flashing philz which rom did u flash?.
U should have not got any problem.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I've flashed ReVolt JB version
the result was the same as any other method I've tried so far..
stuck on loading screen / bootloop
PureMind0 said:
I've flashed ReVolt JB version
the result was the same as any other method I've tried so far..
stuck on loading screen / bootloop
Click to expand...
Click to collapse
Ok.
Do this.
Boot into recovery
Wipe cache
Wipe dalvik cache
Factory reset/wipe data
Format system
Format preload
Format data
Install philz kernel
Boot into recovery
Select wipe data/factory reset-clean to install a new rom
Install any custom stock rom like neat rom, vivekrom , biftor (choose any one)
Reboot
I assume you are using gti9100
Report back.
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Ok.
Do this.
Boot into recovery
Wipe cache
Wipe dalvik cache
Factory reset/wipe data
Format system
Format preload
Format data
Install philz kernel
Boot into recovery
Select wipe data/factory reset-clean to install a new rom
Install any custom stock rom like neat rom, vivekrom , biftor (choose any one)
Reboot
I assume you are using gti9100
Report back.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I did everything you said. installed Bitfor rom
got the same result.. still stuck on loading screen
Thanks a lot for your help it's much appreciated
hope I'll be able to solve this somehow
PureMind0 said:
I did everything you said. installed Bitfor rom
got the same result.. still stuck on loading screen
Thanks a lot for your help it's much appreciated
hope I'll be able to solve this somehow
Click to expand...
Click to collapse
First boot takes 5/7 min.
Wait
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
First boot takes 5/7 min.
Wait
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
still nothing...
and it usually takes 1-2 mins max for me
also doesn't explain why stock from odin wont work
It seems to me that I need to somehow fix the efs folder but no idea how to do that
almost all the guides I've seen about that requires the rom to work and use root explorer
the others wasn't clear enough or just not related
according to the shell commands my efs folder is empty
copying the efs folder I have on my sdcard doesn't help because it's not there after reboot
I have a tar.gz as well but not sure how to use it
can I flash the .tar via odin? or some other solution with adb/shell?
or do you think it has nothing to do with my problem?
anyone have any idea how to help me???
I've tried many different ways but my device just wont make it past the loading screen of the rom (doesn't matter which one)
I really have no idea what can cause this problem
thought that flashing stock rom via Odin should fix it but it doesn't help
I've tried some methods I've seen to fix efs problems but so far nothing helped
I'm really desperate at the moment :\
download mode and flash the cwm kernel via Odin should work.
Sent from my GT-I9100G using xda app-developers app
i am facing exact same problem
and it also start with flashing cwm for kitkat
nothing working now stock or custmised rom
hope some one can help us to fix it
Any more ideas??
If I take it to my carrier company, will they be able to make it work with their official rom?
PureMind0 said:
Any more ideas??
If I take it to my carrier company, will they be able to make it work with their official rom?
Click to expand...
Click to collapse
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
casperusm said:
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
Click to expand...
Click to collapse
Good luck!
I should send mine tomorrow and hopefully they can fix it
update when you get yours back
casperusm said:
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
Click to expand...
Click to collapse
Did you get your device fixed?
OK.....just a quick thing......Odin flashing a normal single file stock firmware *may* not be the solution as it just overwrites what is already there during the flash. I will provide a link to a three part firmware that wipes the old as it flashes.....this essentially flashes the firmware onto 'pristine' memory partitions....it *might* help......
Here's the link.....
http://www.mediafire.com/?1z5ao5b6r594x45
Search for @Hopper8s Odin troubleshooting guide for instructions on how to flash it.....
Good luck.....
This might be my S2, or it might be my W...but it's definitely CM
Huawei u8800
gingerbread 2.3.5
kernel version- 2.6.35.7-perf
build number - U8800V100R001C00B526G001
I had rooted my phone using 'Easy Rooting Toolkit (v-4)' by DoomLord..I was trying to install custom roms by cyanogenmod.. for some reason i was not able to install custom roms and was getting a status 7 error...so i did sd card partition from Rom manager..but instead of external it did an internal partition..after that my phone is recognizing many problems...many programs are force closing at anytime..if i do anything on phone and reboot then my phone goes into bootloop...then i have to reset data, clear partition and then reboot...then my phone starts properly....i am not able to root or install custom rom because as my phone reboots it remains into bootloop...
What went wrong ??? What should i do ???? How do i proceed ??? plz help me ..i searched many forums but did not get any good answers..pppppllllllzzzzzzz help!!!!!!!!!
help plzzzzzz..........................................................................................
crackandroid said:
help plzzzzzz..........................................................................................
Click to expand...
Click to collapse
Huawei(s) have locked bootladers... Which means custom recoveries (cwm, twrp..) are next to impossible to do/use, which means no backups to save you when $h¡+ happens, which also means working ROMs are virtually nonexistent... Sorry bro.. Might be time to exchange/trade in/return..
Sent from my N9510 using Tapatalk
i can unlock bootloader officially .....does it have any risks.....and will it solve my problem.thanks for hlp bro....
Did u install a known working cwm/twrp recovery and did u make a backup?
Sent from my N9510 using Tapatalk
bcrichster said:
Did u install a known working cwm/twrp recovery and did u make a backup?
Sent from my N9510 using Tapatalk
Click to expand...
Click to collapse
yes ...i had also done a nandroid backup....
i had done backup with cwm...
crackandroid said:
yes ...i had also done a nandroid backup....
i had done backup with cwm...
Click to expand...
Click to collapse
Does the boot loop take you back to recovery? And if so, does your nandroid restore/work properly?
Sent from my N9510 using Tapatalk
bcrichster said:
Does the boot loop take you back to recovery? And if so, does your nandroid restore/work properly?
Sent from my N9510 using Tapatalk
Click to expand...
Click to collapse
the bootloop continues till i dont do a factory resst..right now i have my inbuilt recovery which does not have restore option..and also when i try to restore backup via nandroid manager it says 'please select your recovery'..i cannot instll cwm now..
crackandroid said:
the bootloop continues till i dont do a factory resst..right now i have my inbuilt recovery which does not have restore option..and also when i try to restore backup via nandroid manager it says 'please select your recovery'..i cannot instll cwm now..
Click to expand...
Click to collapse
help needed.....thanks for the help guys....salute to all of u...
help really appreciated..............plzzz
crackandroid said:
help really appreciated..............plzzz
Click to expand...
Click to collapse
I solved a similar problem in the following way:
cwm emulated trough adb
wipe everything and format system
flash a new rom
may be it helps!
orthoman said:
I solved a similar problem in the following way:
cwm emulated trough adb
wipe everything and format system
flash a new rom
may be it helps!
Click to expand...
Click to collapse
kk......i'll try this solution today........can u tell me how to 'cwm emulated through adb' part....properly in steps..
what about using fastboot? and/or flashing cwm through adb in the recovery
thanks for help guys.....both the above methods didnt work for me......instead ma phone was not starting for 7 days.....anyways now it has started....waiting for other answers,,,,,