[Q] USB jig to still use samsung warranty? - Galaxy S II Q&A, Help & Troubleshooting

Hi guys im only new here,
Im not sure if i posted this in the right section feel free to move it MODs
Anyway I think i may have bricked my galaxy s2, I get a message that says "Firmware upgrade encountere...." ,after i tried to flash a stock rom back onto the phone after using lite'ning rom for a while, the process failed about half way through, I was using Odin, i can no longer get into recovery mode or clockwork recovery....I can still however get into download mode but my pc wont recognise the device through odin.....
I think it may be bricked
If the phone is bricked could i get a usb jig and reset the binary count to "0" and bring it to my authorised samsung repair shop, would they know i have rooted the phone and would my warranty still be covered?
Thanks for any help guys, i loved this phone and now its useless..

This should go into Q&A.
What stock firmware did you flash exactly? Stock carrier?
Sent from my GT-I9100 using Tapatalk

Hi I tried to flash an inscure.tar file, of a stock rom i found on a website i think it was KE7,.... sorry im a complete noob

No worries. That's why XDA is here for you to learn.
So you can get into download mode but Odin doesn't see your device. Seems like the Samsung drivers isn't installed on your computer. Try installing the device drivers manually. And see if Odin recognizes your device then.
EDIT: did you make sure kies wasn't running in the background when you're using ODIN?
Sent from my GT-I9100 using Tapatalk

Ok thanks for the help, kies was not running tin the background anyway, can you tell me how to manually install the drivers if possible?

Where can i get a stock firmware for a sgs2 sgh-I777? i loaded ics 4.0.3 and now my speaker and mic dont work during calls. Anyone have and ideas on how to get back to gingerbread? i have search for it and everywhere says it has been removed.

Try uninstalling kies and install again. Once installed plug in your device and see if it downloads the drivers that way.
I'll try and look for the drivers while you do that.
Sent from my GT-I9100 using Tapatalk

Spardicus05 said:
Where can i get a stock firmware for a sgs2 sgh-I777? i loaded ics 4.0.3 and now my speaker and mic dont work during calls. Anyone have and ideas on how to get back to gingerbread? i have search for it and everywhere says it has been removed.
Click to expand...
Click to collapse
You'll have better luck in the at&t gs2 forums. You won't find your file here. Sorry
Sent from my GT-I9100 using Tapatalk

Ok i will try that and get back to you

Sounds like a soft brick. I had problems flashing once (work computer was playing up) and it was complaining about needing an emergency firmware recovery in kies but I just re-flashed the rom when I got home and it was all good.
Hopefully it's the same for you.

The thing is I cant reflash because odin wont recognise the device, and i cannot get into recovery mode for a manual flash either :/

android6391 said:
The thing is I cant reflash because odin wont recognise the device, and i cannot get into recovery mode for a manual flash either :/
Click to expand...
Click to collapse
Did you uninstall/reinstall kies?
Here are the the drivers for you to install
http://hotfile.com/dl/109276666/f22355e/SAMSUNG_USB.rar.html
Sent from my GT-I9100 using Tapatalk

Im in the process of doing it now, my pc is unbaringly slow, will i try the kies installation first before i try install the drivers you gave me?

Okay i just reinstalled kies there and it did not work, kies did not recognise the device, and it showed the same error message on the screen, i am now downloading the drivers you gave to me, i will report back when i have tried that, thanks again

android6391 said:
Okay i just reinstalled kies there and it did not work, kies did not recognise the device, and it showed the same error message on the screen, i am now downloading the drivers you gave to me, i will report back when i have tried that, thanks again
Click to expand...
Click to collapse
Alright let me know
Sent from my GT-I9100 using Tapatalk

Okay i installed the drivers and my computer wont recognise the device in fact, it says "usb device malfunctioned and windows does not recognise it" :/
looks like im outta luck, any other suggestions?

android6391 said:
Okay i installed the drivers and my computer wont recognise the device in fact, it says "usb device malfunctioned and windows does not recognise it" :/
looks like im outta luck, any other suggestions?
Click to expand...
Click to collapse
Hmmm strange. When you're in download mode and you plug into Odin what does it say?
Edit: what version of windows do you have?
Sent from my GT-I9100 using Tapatalk

android6391 said:
Okay i installed the drivers and my computer wont recognise the device in fact, it says "usb device malfunctioned and windows does not recognise it" :/
looks like im outta luck, any other suggestions?
Click to expand...
Click to collapse
Try on another Port or Computer ?

sikcool said:
Try on another Port or Computer ?
Click to expand...
Click to collapse
If its possible.
Sent from my GT-I9100 using Tapatalk

the galaxy s2 just shows the standard downloading screen with my binary count number etc as it normally would, but odin dosent pick it up, dosent show any sign of contact to the device, even windos says the device is malfunctioned, its an old dell with windows xp

Related

Galaxy S2 problem, need advice please....

Hi guys,
need a hand here, yesterday I plugged my S2 to my PC but it wouldn't show up. I've done this many times before. I was getting the message saying 'usb device not recognized'. I then flashed the new ICS resurrection rom by moving it to my SD Card through an adapter. I thought maybe the usb problem would go away.
As my luck would have it the flash went badly it seems because i'm now getting the kernel panic message on my device. I can't get it to recovery mode but I can get it to download mode BUT Pc doesn't recognize the device still...
Could this maybe be a damaged port on my device?
Is it maybe a driver problem?
Any help would be much appreciated....
Anyone have any advice?
pdscoelho said:
Is it maybe a driver problem?
Click to expand...
Click to collapse
Did you install the usb drivers that are included in kies? They're in the kies\usb driver directory.
peachpuff said:
Did you install the usb drivers that are included in kies? They're in the kies\usb driver directory.
Click to expand...
Click to collapse
I plugged in a galaxy TAB and used KIES through my web browser to transfer items to the TAB. Does this interfere with the SGSII? I haven't used KIES with the SII
Instructions are to install Kies and connect the phone with the Samsung cable and drivers are found .It does not mention install another device and it will work so its a guess as to driver conflict due to Kies looking for the TAB .
Could be port on PC not a mainboard port USB on phone dirty or custom rom buggered phone .
I would flash stock GB rom via Odin .
jje
JJEgan said:
Instructions are to install Kies and connect the phone with the Samsung cable and drivers are found .It does not mention install another device and it will work so its a guess as to driver conflict due to Kies looking for the TAB .
Could be port on PC not a mainboard port USB on phone dirty or custom rom buggered phone .
I would flash stock GB rom via Odin .
jje
Click to expand...
Click to collapse
I can only get my phone into download mode, when I connect and open up odin it isn't picking up the device.....so how can I flash anything to it?
Hi
never had that problem :|......Try instal CWM whit ROm manager(market) and u can go in Recovery Mode
OP, try this.
Ekibyo22 said:
never had that problem :|......Try instal CWM whit ROm manager(market) and u can go in Recovery Mode
Click to expand...
Click to collapse
I can't get the s2 into anything except download mode....I tried flashing a new rom to see if the usb problem would go away but something went wrong with the flash. I get the kernel panic error message. So no way of installing recovery or anything else...I have to fix it through odin but not getting it to see my device....
pdscoelho said:
I can't get the s2 into anything except download mode....I tried flashing a new rom to see if the usb problem would go away but something went wrong with the flash. I get the kernel panic error message. So no way of installing recovery or anything else...I have to fix it through odin but not getting it to see my device....
Click to expand...
Click to collapse
Sorry, missed that you can't get to anything BUT download mode.
Try flashing an older Gingerbread firmware wipe package then.
EDIT: specifically using mobile Odin, since your computer isn't detecting your phone via USB... not even sure if that works, but what do you have to lose at this point?
ctomgee said:
Sorry, missed that you can't get to anything BUT download mode.
Try flashing an older Gingerbread firmware wipe package then.
EDIT: specifically using mobile Odin, since your computer isn't detecting your phone via USB... not even sure if that works, but what do you have to lose at this point?
Click to expand...
Click to collapse
Never heard of mobile Odin, but i've found it on the market. How can I get this to my device? it doesn't load up anything except the kernel panic message or download mode with the key combo.....
pdscoelho said:
Never heard of mobile Odin, but i've found it on the market. How can I get this to my device? it doesn't load up anything except the kernel panic message or download mode with the key combo.....
Click to expand...
Click to collapse
Download the apk to your computer, and email it to yourself? Or via wifi file copy?
EDIT: I'm a dork, right, your phone doesn't boot. Um... I'm not sure now... have to think about it.
I'm going to have to get a new usb port in my S2, I just hope it works after that. Found a few guys that can do it for about $40-$60. LI'll let everyone know how it goes....
pdscoelho said:
I'm going to have to get a new usb port in my S2, I just hope it works after that. Found a few guys that can do it for about $40-$60. LI'll let everyone know how it goes....
Click to expand...
Click to collapse
Good luck, dude.
I resolved the problem! Thanks for the input guys

[Q] update for galaxy fit accidentally installed on galaxy ace?

hi guys, i really need help with this, i was updating my friends phone from froyo to gingerbread. the update was successfully done on the galaxy fit, but the problem was, i accidentally installed the update for the galaxy fit on the galaxy ace, w/c caused the screen to go colored and it wont even go to recovery mode nor do the hard reset on the phone. i also tried to reinstall the correct package on the galaxy ace but the computer wont even recognize the phone. so i need help on what to do. ive been searching all over the internet for the solution to this. hope you can help me out with this.
Odin
Sent from my LG-E739 using Tapatalk
MysteryEmotionz said:
Odin
Sent from my LG-E739 using Tapatalk
Click to expand...
Click to collapse
He said he can't even get Odin to detect his phone , what makes you think Odin will work ?
@OP I think you might wanna send it to service center.....
Ace-ing all tests.
EmoBoiix3 said:
He said he can't even get Odin to detect his phone , what makes you think Odin will work ?
@OP I think you might wanna send it to service center.....
Ace-ing all tests.
Click to expand...
Click to collapse
He said the computer won't recognize the phone. Maybe you need to learn how to read. When using Odin or cwm to flash anything it doesn't touch download mode. That's a untouched partion.
Op try to boot into download mode then connect your phone n see if Odin recognizes the phone. If so you can use Odin to restore the phone.
Sent from my LG-E739 using Tapatalk
MysteryEmotionz said:
He said the computer won't recognize the phone.
Click to expand...
Click to collapse
If it's a Windows based PC, he should check to make sure he has USB drivers installed. If the drivers aren't installed, when he connects the phone to the PC it should detect the phone and try to install USB drivers. If it doesn't find any it will ask for a location to install them from. I forget if I installed them separately, or if they got installed when I loaded Kies.
But if he has the proper USB drivers installed, and the phone doesn't show up in Windows Explorer as a new drive in a few seconds... it's probably a problem with the phone that might mean sending it back to Samsung for repairs.
hard brick
give it to service
only thing that can help u now is z3box (and other similar tool)
EDIT: Deleted my reply about drivers. It was redundant and other replies come from people with much more experience.
My friend has done this too before, only Service Center or RIFF(?) JTAG Box can save you.
@ Service centre blame kies for everything (If Kies wasn't so useless- we wouldn't need to update with Odin.
Harry GT-S5830 said:
@ Service centre blame kies for everything (If Kies wasn't so useless- we wouldn't need to update with Odin.
Click to expand...
Click to collapse
I think you got this from me

Firmware upgrade encountered......cant get into recovery, can get download, help?

Hi
i was installing a stock rom last night and I got the Firmware Upgrade encountered....
The phone wont boot into recovery, it will how ever go into download mode but odin will not detect it no matter what I do
Tried every set of drivers I could find, no luck.
I am on windows 7 64 bit.
Is the phone bricked, it shows no binary count in download, would it be covered under warranty?
Really need to get my phone back if anyone can help, I have tried everything at this stage, I think
Thanks
Did you already installed the Kies software? It will install the Galaxy S2 drivers, maybe that is the problem. If it really doesn't work, try another computer with the Kies functioning!
delawalla said:
Did you already installed the Kies software? It will install the Galaxy S2 drivers, maybe that is the problem. If it really doesn't work, try another computer with the Kies functioning!
Click to expand...
Click to collapse
Thanks delawalla
I have kies tried a laptop and a pc running xp but it wont work.
Also I have tried it on my windows 7 laptop but no luck.
Think I will just return the phone and hope for a repair
amadablam said:
Thanks delawalla
I have kies tried a laptop and a pc running xp but it wont work.
Also I have tried it on my windows 7 laptop but no luck.
Think I will just return the phone and hope for a repair
Click to expand...
Click to collapse
dont forget that you need to start odin before you plug the phone in, if you can get into download mode then it's not bricked
mrbluesman said:
dont forget that you need to start odin before you plug the phone in, if you can get into download mode then it's not bricked
Click to expand...
Click to collapse
Done that mate, thats the frustrating part, I can get into DL and know what to do but on three computers, I cant get it to work and ODIN always worked for me. I have had at least 300 roms on this phone but being stuck in DL mode sucks when I cant get progress, even returning to stock and using the factory tar files. I cant get any furhter than DL screen thanks for your help

[Q] Firmware upgrade encountered an issue.

how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app

[Q] Confirmation on whether this is bricked or not?

My friend handed me his samsung galaxy SII believing that I could fix his problem. He rooted it, and started going ROM crazy. Needless to say he broke it. I thought I could fix it, maybe it was a simple bootloop issue or what have you, but the phone won't even get recognized on my computer. I can set it into ODIN mode, but it won't get recognized by my computer, even though I downloaded the samsung usb drivers. It won't show up in ODIN, and It won't enter recovery mode either for some odd reason, so there's no chance of me loading something through his SD card. Whenever I turn it on normally it's stuck at a battery screen with a circle as if it were loading the battery, but it never finishes.
I'm pretty sure it's bricked, but I want to be sure before I tell him to buy a new phone.
The only information I can get out of it is that it's a SHW-M250K
thank you in advance.
mmmmm ask your friend if he converted it to an I9100.
Sent from the little guy
gastonw said:
mmmmm ask your friend if he converted it to an I9100.
Sent from the little guy
Click to expand...
Click to collapse
I believe he did.
RichAzure said:
I believe he did.
Click to expand...
Click to collapse
Then Flash siyah
Try V5 first, see if it can gets you to recovery mode.
If it doesn't work, try V6.
gastonw said:
Then Flash siyah
Try V5 first, see if it can gets you to recovery mode.
If it doesn't work, try V6.
Click to expand...
Click to collapse
I would, but as I previously mentioned, the phone won't boot into recovery on it's own, and it won't recognize on my computer
But you can enter DL mode, so that's your window.
You need to get your pc to see the device, we git plenty of tricks for that. Haven't you bumped into any of them?
Try other odin versions/usb cable/usb ports/clean kies uninstall and re install, try another pc and do it all over again.
You can also disable the antivirus if you like.
Sent from the little guy
gastonw said:
But you can enter DL mode, so that's your window.
You need to get your pc to see the device, we git plenty of tricks for that. Haven't you bumped into any of them?
Try other odin versions/usb cable/usb ports/clean kies uninstall and re install, try another pc and do it all over again.
You can also disable the antivirus if you like.
Sent from the little guy
Click to expand...
Click to collapse
Could you point me in the right direction if you don't mind?
RichAzure said:
Could you point me in the right direction if you don't mind?
Click to expand...
Click to collapse
1) if ur PC is running Win7 then try running Odin with 'Administrative rights' and see.
2)Kill all Kies process running in the background.
3)Try connecting phone to Pc with the main USB port.
4)try diff v of ODIn (but still recomend u to go for v1.85)
Try this thread from xda:
http://forum.xda-developers.com/showthread.php?t=1457458
Sent from my SGS II
Sun90 said:
1) if ur PC is running Win7 then try running Odin with 'Administrative rights' and see.
2)Kill all Kies process running in the background.
3)Try connecting phone to Pc with the main USB port.
4)try diff v of ODIn (but still recomend u to go for v1.85)
Click to expand...
Click to collapse
Whenever I plug in the device it says it has malfunctioned and to replace it
That's good, try all the above again.
Remember to CLEAN uninstall kies (with your uninstaller pro or similar) and install it right back.
You can also intall kies on another PC and try it out.
Sent from the little guy

Categories

Resources