hi just took the new update for my ray and it seems to have bricked it is there anyway i can recover it and get it working again , bootloader was unlocked and i hit yes to update so im taking it i should have locked the bootloader before taking the update
andyc240 said:
hi just took the new update for my ray and it seems to have bricked it is there anyway i can recover it and get it working again , bootloader was unlocked and i hit yes to update so im taking it i should have locked the bootloader before taking the update
Click to expand...
Click to collapse
how did you unlocked your bootloader? official SE method or the testpoint?
try to use flashtool.
just used the test point method and was wondering wood this work if i follow the instructions
Flashtool application
Xperia 2011 Range_FreeXperia_ALL.ftf File
unbrick sony ericsson xperia ray
plug your microUSB cable date to X-Ray (not to PC, not yet).
Put Xperia 2011 Range_FreeXperia_ALL.ftf file to folder firmwares (you can find this folder in FlashTool).
Run X10FlashTool.exe
Click “Flash” button and then choose Xperia 2011 Range_FreeXperia_ALL.ftf file.
Wait for FlashTool command, press and hold volume[-].
When command from FlashTool appear, connect the USB cable to PC (remember! in condition volume[-] is press and hold).
A green light at home button will turn on when FlashToll detect the sony ericsson Xperia Ray. now you can release the volume button.
Sit back and wait until the process is done
When all process is complete, try to turn on your sony ericsson Xperia Ray. It should be fine now.
andyc240 said:
just used the test point method and was wondering wood this work if i follow the instructions
Flashtool application
Xperia 2011 Range_FreeXperia_ALL.ftf File
unbrick sony ericsson xperia ray
plug your microUSB cable date to X-Ray (not to PC, not yet).
Put Xperia 2011 Range_FreeXperia_ALL.ftf file to folder firmwares (you can find this folder in FlashTool).
Run X10FlashTool.exe
Click “Flash” button and then choose Xperia 2011 Range_FreeXperia_ALL.ftf file.
Wait for FlashTool command, press and hold volume[-].
When command from FlashTool appear, connect the USB cable to PC (remember! in condition volume[-] is press and hold).
A green light at home button will turn on when FlashToll detect the sony ericsson Xperia Ray. now you can release the volume button.
Sit back and wait until the process is done
When all process is complete, try to turn on your sony ericsson Xperia Ray. It should be fine now.
Click to expand...
Click to collapse
may i ask first how did you get the update? is it from SEUS or PC Companion? because if you use testpoint method, you can still repair it via SEUS.
but if have already downloaded an .ftf file, yes, that will work via flashtool. you can also try wotan server.
the update came through the wifi on my phone and i just used flashtool and everything was great worked a treat and is there a way i can take the update without bricking the phone and not having to lock my bootloader
andyc240 said:
the update came through the wifi on my phone and i just used flashtool and everything was great worked a treat and is there a way i can take the update without bricking the phone and not having to lock my bootloader
Click to expand...
Click to collapse
maybe the installation is not completed. update via PC Companion or SEUS. never mind the unlocked bootloader because it safe to receive official updates if you have your bootloader unlocked via testpoint method.
ok thanks will try this and see what happens and i prefered using the testpoint method as thought that it was safer
for the files, go here: http://forum.xda-developers.com/showthread.php?t=1553601
Related
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Pull out your battery and then reinsert and use buttons to go to recovery ( volume down, home n power)
Sent from my LG-P500 using xda premium
JollyKing said:
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
Click to expand...
Click to collapse
if you have an X10mini (notPRO) and tried to install CM7 (i.e. miniCM7-2.1.3 or official CM)
you obviously forgot to read the first lines of my FAQ, so do it, and then, you'll have fastly working phone
Im not getting back into recovery at all :/ jus keeps rebooting to sony ericson screen
evil_chris said:
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Click to expand...
Click to collapse
I am Not seeing A repair function with the pc companion???
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
if you really want to use miniCM7 and have your BL unlocked, just flash nAa's kernel with flashtool
if not, you absolutely need to start from the beginning using SEUS, sorry (post 3 of my FAQ, you'll get links to debrick )
and read carefully everything before making mistakes
I was in the same situation. I installed minicm7 pro v20 and then it entered infinity loopboot. With luck, i pressed the menu button for some seconds just before "sony ericssom" appear and then i entered in the CWM 3.2 menu, where i did a restore.
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
the repair funcition is with the phone unpluged go to Pc companion > Suport zone > update your software > repair phone> then just folow what it say
try sony Ericsson update service it works for me :L
I have the same condition with neo V. PLS HELP ME TOO !!
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Sturdy_99 said:
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Click to expand...
Click to collapse
Don't worry if the Flashtool says 'USB debugging is disabled' if you enabled it before flashing it,it is because the Flashtool got a problem with connecting to your USB debugging feature in your phone...
About the bootloop,it is considered a softbrick as it can be fix as long as you can connect your phone to your PC in Flashmode
How to recover your phone back :
1.Go to wotanserver
2.Register and verify email if requested
3.Download wotanclient in the website
4.Download the needed driver in the website
5.Make sure you installed the thing that is needed thing before proceed
6.Open wotanclient
7.It will now start in Startup tab,wait for it if your wotanclient is auto updating
8.Now,after your wotanclient is updated,it will now currently in the Phone detection tab and asking you to connect your phone service button (for Xperia Neo V,I think it is back button)
9.Press and hold the service button and connect your phone to computer using USB
10.It will now connecting to your phone,and go into Phone setting tab
11.Enter your registered account and password,and click the 'Update' option and you should have a 1 credit result and something like that
12.After that,it will go to the setting tab,choose what your phone model is,and choose which phone firmware would you like to recovered into your phone
13.Choose your country Generic for the best result for your phone after recover your phone
14.Now,it will now download the file for your phone,it should take around 1-2 hours
15.After downloading,it will flash the phone automatically
16.After the phone got flashed,it will ask you to disconnect your USB and reboot your phone
17.Reboot your phone,and it will take sometime for the phone to create cache for your new system
18.Set your phone setting like the first time you buy your phone
19.?????????????
20.PROFIT
If you think my post help you,don't forget to click the Thanks button
I wil try it out.
THANKS FOR THE SOLUTION. I will try it out. Hope it WORKS...
Dude getting stuck at phone detection
i rooted my x10 mini and flashed it it stuck at se logo page.
wat to do now
i cannot use pc campanion without going to menu screen
i hav back up of previous os by using xrecovery wat shall i do
Plz help me.
My xperia x10 not booting.it stocks on sony ericsson logo.
what i did is....
1) My phone is rooted
2) i have xrecovery 0.3 installed
3) I installed latest doom kernel for locked bootloaders
4) i am tryed to update rom to latest CosmicUI rom found on Development forum
5) i forget the that rom only for unlocked bootloaders
6) i am not change the kernel to CosmicUI kernel.
7) after installing rom my phone rebooted and stock on sony ericsson logo
8) i am connected the phone to PC.but it is not detected.
9) i installed xparia x10 ADB & Flash drivers, Flashtool, Sony ericsson PC companion.Still it is not detected in Flash tool and Sony PC Companion.PC shows Unknown device.
Please help me to solve this,
Sorry for my bad english.
Try uninstall Pc companion & drivers and install them again, maybe it detects your phone after that
do not panic. It happened to me last week. Phone won't register on pc until you connect in flash mode to flash a new FW with flashtool. You may already know this but
1)DON'T CONNECT PHONE
2) Start FlashTool in flash mode, choose ur ftf, click ok.
3)Wait until the screen prompts you to plug in ur device.
4)Hold the back button while plugging the usb cable into the phone (make sure it is connected to pc first though)
5) Phone should start flashing, wait until it completes.
If step 5 doesn't take try again from step 2.
AGAIN DON'T WORRY!! Happens all the time.
hit thanks when ur done
Sony erricson xperia x1a- hangs after booting
Hi my sony erricson xperia x1a(Windows mobile6.1 os ) hangs after booting, Ive installed few apps before its gets hanged.
Let me know the solution for this.
devon411 said:
do not panic. It happened to me last week. Phone won't register on pc until you connect in flash mode to flash a new FW with flashtool. You may already know this but
1)DON'T CONNECT PHONE
2) Start FlashTool in flash mode, choose ur ftf, click ok.
3)Wait until the screen prompts you to plug in ur device.
4)Hold the back button while plugging the usb cable into the phone (make sure it is connected to pc first though)
5) Phone should start flashing, wait until it completes.
If step 5 doesn't take try again from step 2.
AGAIN DON'T WORRY!! Happens all the time.
hit thanks when ur done
Click to expand...
Click to collapse
This post contains how to root Xperia Ray ST18i ICS 4.0.4 (4.1.B.587) with the use of DooMLoRD Toolkit.
Instructions
Flash the Kernel of 4.1.A.0.562
Download the Kernel - Go to Following Link
Download the Flash-Tool and Install (If you have not install flash-Tool drivers first you have to install it - \FlashTool\drivers\ FlashTool-drivers.exe )
Then, put ST18i_4.1.A.0.562_kernel.ftf (Downloaded in 1) into the \FlashTool\Firmwares
Then open FlashTool.exe, Click on the Flash Button and select Flash Mode.
Select Ray and Press OK.
Then follow the instruction give by the software to connect the phone to the PC.
Then you have to connect the device to PC (Make sure that device is switched off [remove battery may be]. First Plug the cable to the device and then plug USB to the PC while press and hold volume down key) (If the device connected correctly, a green led will show up)
After finishing flashing kernel, disconnect the cable and restart the Device. (You might get some errors after rebooting, it is normal, and it will be fixed after next step.
Root your device with DooMLoRD’s Tool – Go to Following Link
Re flash the kernel (4.1.B.0.587)
Download the Kernel - Go to Following Link
Now flash the kernel by Follow 3 to 6 in the 1st step.
Now your device is rooted.
Thank You.
For all download Links - winandtips.blogspot.com/2012/09/how-to-root-xperia-ray-st18i-ics-404.html
Special Thanks to - DoomLoRD, OverLo4d (for his tutorial in Arc/S section)
Rooting Xperia Ray St18i
Hi, I have followed the instructions word by word, but its not downgrading to ***562****, after flashing when i restart the phone it still shows ***587""".
Any help with this??????
Regards,
Junaid
danudmw said:
This post contains how to root Xperia Ray ST18i ICS 4.0.4 (4.1.B.587) with the use of DooMLoRD Toolkit.
Instructions
Flash the Kernel of 4.1.A.0.562
Download the Kernel - Go to Following Link
Download the Flash-Tool and Install (If you have not install flash-Tool drivers first you have to install it - \FlashTool\drivers\ FlashTool-drivers.exe )
Then, put ST18i_4.1.A.0.562_kernel.ftf (Downloaded in 1) into the \FlashTool\Firmwares
Then open FlashTool.exe, Click on the Flash Button and select Flash Mode.
Select Ray and Press OK.
Then follow the instruction give by the software to connect the phone to the PC.
Then you have to connect the device to PC (Make sure that device is switched off [remove battery may be]. First Plug the cable to the device and then plug USB to the PC while press and hold volume down key) (If the device connected correctly, a green led will show up)
After finishing flashing kernel, disconnect the cable and restart the Device. (You might get some errors after rebooting, it is normal, and it will be fixed after next step.
Root your device with DooMLoRD’s Tool – Go to Following Link
Re flash the kernel (4.1.B.0.587)
Download the Kernel - Go to Following Link
Now flash the kernel by Follow 3 to 6 in the 1st step.
Now your device is rooted.
Thank You.
For all download Links - winandtips.blogspot.com/2012/09/how-to-root-xperia-ray-st18i-ics-404.html
Special Thanks to - DoomLoRD, OverLo4d (for his tutorial in Arc/S section)
Click to expand...
Click to collapse
Sorry for my question.
Can I use this steps for my Ray with Android 4.04. but Built is 4.1.B.0.431 ?
where is link?!!!!!!
---
Help
I press the back button after i turnoff the phone and nothing happen . I am nab in the job with rooting,is my first attempt of this type.!!!
adidoareu said:
I press the back button after i turnoff the phone and nothing happen . I am nab in the job with rooting,is my first attempt of this type.!!!
Click to expand...
Click to collapse
Try to press volume down when phone is turned off and while holding it down connect it to the pc. Be sure the drivers from the "flashtool installation folder > drivers" are installed :good:
rooting xperia ray
Hello
My name is Ambrose
I want to update my xperia ray to ics android 4
what do i have to do ?....ive allready tried pc companion repair and it doesnt work....please help!
Anbrosius34 said:
Hello
My name is Ambrose
I want to update my xperia ray to ics android 4
what do i have to do ?....ive allready tried pc companion repair and it doesnt work....please help!
Click to expand...
Click to collapse
Try with sony update service...
Sent from my GT-I9100 using xda premium
Anbrosius34 said:
Hello
My name is Ambrose
I want to update my xperia ray to ics android 4
what do i have to do ?....ive allready tried pc companion repair and it doesnt work....please help!
Click to expand...
Click to collapse
you must relock bootloader and use stock rom
still no ICS on xperia ray
m4nz said:
Try with sony update service...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
hello again....thanks for your reply but i still cant update my xperia ray to ics,it says i allready have my phone up to date and when i update it just blanks all my data and stays on android 2....im so confused....is there any other way i can update my xperia ray to ics? please help me! :crying:
---------- Post added at 07:47 PM ---------- Previous post was at 07:40 PM ----------
V4mpjr3 said:
you must relock bootloader and use stock rom
Click to expand...
Click to collapse
hello
thanks for your reply....i would like to know how to relock my bootloader...please could you tell me?
You can just flash ics ftf with flashtool and flash a prerooted kernel for ics
You needn't relock bootloader!
Sent from my SK17i running MIUI 2.11.16
Usb debugging off
i conntect the device and flash via flashtool
I follow the instructions, but flashtool says
'usb debugging off' but i actually turned on weeks ago and still it is.
any idea?
ackid32 said:
i conntect the device and flash via flashtool
I follow the instructions, but flashtool says
'usb debugging off' but i actually turned on weeks ago and still it is.
any idea?
Click to expand...
Click to collapse
But if you flash a rom, you don't need usb debuggin turned on. Just connect in flashmode, not turned on! Power off, take out battery (optional), hold volume down, connect the usb cable and hold volume down, green led will light up and flashing will start
mihahn said:
But if you flash a rom, you don't need usb debuggin turned on. Just connect in flashmode, not turned on! Power off, take out battery (optional), hold volume down, connect the usb cable and hold volume down, green led will light up and flashing will start
Click to expand...
Click to collapse
I follow these instructions
Download the Kernel - Go to Following Link - done
Download the Flash-Tool and Install (If you have not install flash-Tool drivers first you have to install it - \FlashTool\drivers\ FlashTool-drivers.exe )- done
Then, put ST18i_4.1.A.0.562_kernel.ftf (Downloaded in 1) into the \FlashTool\Firmwares- done
Then open FlashTool.exe, Click on the Flash Button and select Flash Mode.- done
Select Ray and Press OK.- done
Then follow the instruction give by the software to connect the phone to the PC.
Here i follow the instructions on flashtools - unplus / power off /press the back key and hold / plus the cable
here flashtool says the usb debugging off and stalled
When i follow the below rules.
Then you have to connect the device to PC (Make sure that device is switched off [remove battery may be]. First Plug the cable to the device and then plug USB to the PC while press and hold volume down key) (If the device connected correctly, a green led will show up)
After finishing flashing kernel, disconnect the cable and restart the Device. (You might get some errors after rebooting, it is normal, and it will be fixed after next step.
Xperia ray 4.0.4 to jellybean
Nice and simple trick. But I already updated it with sony pc companion and want to ugrade to jelly bean. How can i get the news regarding its update.
Or do you ahve any updates?
danudmw said:
This post contains how to root Xperia Ray ST18i ICS 4.0.4 (4.1.B.587) with the use of DooMLoRD Toolkit.
Instructions
Flash the Kernel of 4.1.A.0.562
Download the Kernel - Go to Following Link
Download the Flash-Tool and Install (If you have not install flash-Tool drivers first you have to install it - \FlashTool\drivers\ FlashTool-drivers.exe )
Then, put ST18i_4.1.A.0.562_kernel.ftf (Downloaded in 1) into the \FlashTool\Firmwares
Then open FlashTool.exe, Click on the Flash Button and select Flash Mode.
Select Ray and Press OK.
Then follow the instruction give by the software to connect the phone to the PC.
Then you have to connect the device to PC (Make sure that device is switched off [remove battery may be]. First Plug the cable to the device and then plug USB to the PC while press and hold volume down key) (If the device connected correctly, a green led will show up)
After finishing flashing kernel, disconnect the cable and restart the Device. (You might get some errors after rebooting, it is normal, and it will be fixed after next step.
Root your device with DooMLoRD’s Tool – Go to Following Link
Re flash the kernel (4.1.B.0.587)
Download the Kernel - Go to Following Link
Now flash the kernel by Follow 3 to 6 in the 1st step.
Now your device is rooted.
Thank You.
For all download Links - winandtips.blogspot.com/2012/09/how-to-root-xperia-ray-st18i-ics-404.html
Special Thanks to - DoomLoRD, OverLo4d (for his tutorial in Arc/S section)
Click to expand...
Click to collapse
I do not see any links !!!
faizkazi4u said:
Nice and simple trick. But I already updated it with sony pc companion and want to ugrade to jelly bean. How can i get the news regarding its update.
Or do you ahve any updates?
Click to expand...
Click to collapse
You want to update to jellybean? There's no official sony jelly bean update. You can just use Cyanogenmod 10/10.1 for android 4.1.2/4.2.1. But for Cyanogenmod you need to unlock your bootloader
impossible root
junaidzs said:
Hi, I have followed the instructions word by word, but its not downgrading to ***562****, after flashing when i restart the phone it still shows ***587""".
Any help with this??????
Regards,
Junaid
Click to expand...
Click to collapse
i've the same problem... someone help us??
Xperia st18i .587 with 4.0.4
Elius93 said:
i've the same problem... someone help us??
Xperia st18i .587 with 4.0.4
Click to expand...
Click to collapse
same problem!
My xperia ray is breaked bootloader.
What can i do?
Where can I download boot loader for xperia ray?
Do you have acces to the download mode ?
If yes use PC Compagnion or a FTF (the .587) is recomended
try to repair it with sony update service
paolinhos said:
try to repair it with sony update service
Click to expand...
Click to collapse
I wouldn't recommend that. If you tried to unlock it and you broke it, it might hard-brick your device...
Try Flashtool and flash a FTF.
I know to access download mod for Xperia Ray(hold volume down key+plug in usb with pc)
1. I try use Sony PC Compagnion to repair and finish success with rom 4.1.B.0.587 but my phone can not open just vibrate only.
2. I use Flash tool to flash the rom(ST18i_Ray_ICS_4.0.4-4.1.B.0.587_Generic_Nordic_1252-5332.ftf ) success too but my phone can not open just vibrate only too.
Sorry my english is bad.
ysambo said:
I know to access download mod for Xperia Ray(hold volume down key+plug in usb with pc)
1. I try use Sony PC Compagnion to repair and finish success with rom 4.1.B.0.587 but my phone can not open just vibrate only.
2. I use Flash tool to flash the rom(ST18i_Ray_ICS_4.0.4-4.1.B.0.587_Generic_Nordic_1252-5332.ftf ) success too but my phone can not open just vibrate only too.
Sorry my english is bad.
Click to expand...
Click to collapse
you got your xray hardbrick, because you use the PC companion update..
is not recomended when you have a Unlocked Bootloader
I don't know how to fix it
ysambo said:
My xperia ray is breaked bootloader.
What can i do?
Where can I download boot loader for xperia ray?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1492805&highlight=hardbricked
Hi all, I have xperia mini with unlock bootloader and rooted. Yesterday my device bricked. I unbricked with octapus and wotan. After that i install with flashtool the Xperia Mini (ST15i)_4.0.2.A.0.42_CE ftf. And the problem Start. I make a big mistake. I try update my device with pc companion to .587 version. After that i can't enter in flashmode and fastboot!!!!!! I install a kernel from mike with flashtool Reboot into fastmode(via ADB) and my phone working again but the problem with flashmode and fastboot exists. Pls someone help me. thank u all
So..you cant flash firmware/kernel anymore??
Sent from my Xperia Ray (ST18i) using XDA Premium 4 mobile app
Exactly!
hi
vassilis91 said:
Hi all, I have xperia mini with unlock bootloader and rooted. Yesterday my device bricked. I unbricked with octapus and wotan. After that i install with flashtool the Xperia Mini (ST15i)_4.0.2.A.0.42_CE ftf. And the problem Start. I make a big mistake. I try update my device with pc companion to .587 version. After that i can't enter in flashmode and fastboot!!!!!! I install a kernel from mike with flashtool Reboot into fastmode(via ADB) and my phone working again but the problem with flashmode and fastboot exists. Pls someone help me. thank u all
Click to expand...
Click to collapse
1.Switch off your mini
2.remove battery and wait for 5 seconds before you reinsert it
3.keep holding upper volume button and connect usb cable (make sure its already connected to PC)
4.if there's blue notification light, then its fastboot mode.
5.Also you need fastboot driver installed from sdk on your PC
May be, if you are familiar with all above steps, i guess something wrong on PC. check with removing & reinstalling fastboot driver from sony's site
dragonX1 said:
1.Switch off your mini
2.remove battery and wait for 5 seconds before you reinsert it
3.keep holding upper volume button and connect usb cable (make sure its already connected to PC)
4.if there's blue notification light, then its fastboot mode.
5.Also you need fastboot driver installed from sdk on your PC
May be, if you are familiar with all above steps, i guess something wrong on PC. check with removing & reinstalling fastboot driver from sony's site
Click to expand...
Click to collapse
I am familiar with this steps. It's not pc problem. My st15i trim area it's damaged maybe after phone bricked.
vassilis91 said:
Hi all, I have xperia mini with unlock bootloader and rooted. Yesterday my device bricked. I unbricked with octapus and wotan. After that i install with flashtool the Xperia Mini (ST15i)_4.0.2.A.0.42_CE ftf. And the problem Start. I make a big mistake. I try update my device with pc companion to .587 version. After that i can't enter in flashmode and fastboot!!!!!! I install a kernel from mike with flashtool Reboot into fastmode(via ADB) and my phone working again but the problem with flashmode and fastboot exists. Pls someone help me. thank u all
Click to expand...
Click to collapse
You say you had unlocked bootloader before flashing ST15i)_4.0.2.A.0.42_CE ftf
And then you upgrade to .587 via pc companion ?
Because AFAIK when I tried updating same on my friends phone with unlocked bootloader. Pc companion denied to update because of software modification.
And if you were successfully updated then most probably your bootloader is relocked. So you may wanna check that!
Also try for hard reset if possible!
Sent from my ST15i using XDA Free mobile app
dragonX1 said:
You say you had unlocked bootloader before flashing ST15i)_4.0.2.A.0.42_CE ftf
And then you upgrade to .587 via pc companion ?
Because AFAIK when I tried updating same on my friends phone with unlocked bootloader. Pc companion denied to update because of software modification.
And if you were successfully updated then most probably your bootloader is relocked. So you may wanna check that!
Also try for hard reset if possible!
Sent from my ST15i using XDA Free mobile app
Click to expand...
Click to collapse
My bootloader is still unlocked because i flash a boot.img kernel via adb fastboot!
Problem solved by @kks111 . My TA was damaged and i had simlock too. He remotely fixed it with 4SE tool . Thanks again
Thats good
Sent from my ST15i using XDA Free mobile app