I had Real Racing 2 on my rooted NT prior to CM7, but can't figure out how to install after flashing CM7. Tried putting the apk in system/app and data/app and both result in failed installation. Any ideas? Maybe permissions are off?
Sent from my Droid Incredible ICS 4.0.3
That is a good question.
I couldnt' get asphalt 6, modern combat 3, and 9mm to play.
They would validate files after install but would force close when starting the games.
Several other games I couldn't even get to install and would get the install failed prompt.
One of the only graphic intense games I could run was shadowgun.
boyj600 said:
I had Real Racing 2 on my rooted NT prior to CM7, but can't figure out how to install after flashing CM7. Tried putting the apk in system/app and data/app and both result in failed installation. Any ideas? Maybe permissions are off?
Sent from my Droid Incredible ICS 4.0.3
Click to expand...
Click to collapse
Have you tried installing them from the Market? idk if they're market apps or not or how you acquired them or whatever.
Try popping out the SDcard as I mention here: http://forum.xda-developers.com/showthread.php?t=1484272
then try to install
Nuckin said:
Have you tried installing them from the Market? idk if they're market apps or not or how you acquired them or whatever.
Try popping out the SDcard as I mention here: http://forum.xda-developers.com/showthread.php?t=1484272
then try to install
Click to expand...
Click to collapse
The game doesnt show up in the market on the NT, so I swapped the apk over from my phone, which worked prior to CM7.
Tried the SD card method and it said it installed successfully but when I try to load the game it just goes to a black screen...forever
boyj600 said:
The game doesnt show up in the market on the NT, so I swapped the apk over from my phone, which worked prior to CM7.
Tried the SD card method and it said it installed successfully but when I try to load the game it just goes to a black screen...forever
Click to expand...
Click to collapse
When you were on Stock, did you do the build.prop change that was posted?
No build.prop changes the first time, just copied apk from phone to tablet and installed.
Sent from my BNTV250 using xda premium
It may be a graphic driver issue.
Wait, where did you guys get cm7? or are you testing cm7 alpha
sungod88 said:
Wait, where did you guys get cm7? or are you testing cm7 alpha
Click to expand...
Click to collapse
Haha, if I had a nickel...
The CM7 downloads were taken down due to several bugs, including one that nearly fully bricked the NT.
I have been monitoring the CM7/9 progress from day 1 and downloaded the Alpha the morning it was released before they took it down.
Sent from my BNTV250 using xda premium
I have Asphalt 6: Adrenaline on my Captivate. It runs ok usually, but some times it gets very choppy and unplayable. I want to try it on my NT. I could not find it on the Market of Amazon App Store so I used Titanium Backup and Dropbox to back up, move the files, and restore. The app shows up on the NT but when you I try to open it, it says that it is not compatible and that I should request a refund.
My NT is on 1.4.0, rooted (Nook&Zergy) with OTAs blocked.
Has anyone figured out how to get this game working?
bobapunk said:
I have Asphalt 6: Adrenaline on my Captivate. It runs ok usually, but some times it gets very choppy and unplayable. I want to try it on my NT. I could not find it on the Market of Amazon App Store so I used Titanium Backup and Dropbox to back up, move the files, and restore. The app shows up on the NT but when you I try to open it, it says that it is not compatible and that I should request a refund.
My NT is on 1.4.0, rooted (Nook&Zergy) with OTAs blocked.
Has anyone figured out how to get this game working?
Click to expand...
Click to collapse
Please do not post the same question in multiple threads.
Related
Heads up, Gun Bros 1.3 doesn't work on the NC 1.1.0. At least for me. Beta was working, but I uninstalled it thinking 1.3 would work as well.
vapor63 said:
Heads up, Gun Bros 1.3 doesn't work on the NC 1.1.0. At least for me. Beta was working, but I uninstalled it thinking 1.3 would work as well.
Click to expand...
Click to collapse
1.3 works fine for me. On both Eclair and Froyo.
Edit: I am wrong. It crashes on Froyo.
I was never able to get any GLU games working on the Nook. Gun Bros loaded the title screen and that was it.
philburkhardt said:
1.3 works fine for me. On both Eclair and Froyo.
Click to expand...
Click to collapse
Anything you did in particular besides open the apk in ASTRO and install or adb install? Neither of those have made a running copy for me.
vapor63 said:
Anything you did in particular besides open the apk in ASTRO and install or adb install? Neither of those have made a running copy for me.
Click to expand...
Click to collapse
I don't even think I used Astro. I send the apk straight from my EVO to Dropbox. Then I go into the Dropbox app on my nook, and click on the apk there. It downloads and automatically opens the app manager.
I did the same as you. I uninstalled 1.1 to install 1.3.
Where did you get the apk?
philburkhardt said:
I don't even think I used Astro. I send the apk straight from my EVO to Dropbox. Then I go into the Dropbox app on my nook, and click on the apk there. It downloads and automatically opens the app manager.
I did the same as you. I uninstalled 1.1 to install 1.3.
Where did you get the apk?
Click to expand...
Click to collapse
I can't get it to work on my froyo ROM either. Starts and FC's right away. I grabbed the apk off market. Can you attach yours here?
nphil said:
I can't get it to work on my froyo ROM either. Starts and FC's right away. I grabbed the apk off market. Can you attach yours here?
Click to expand...
Click to collapse
[email protected]#$
Sorry, I totally apologize. It crashes on my Froyo too. It is only working on Eclair. I could have sworn I had it working last night, but I am apparently an idiot.
Edit: What's the deal with that, anyway? I had way more games working on my Eclair set up.
I'm still curious as to how you have it running on Eclair. My logcat shows some sort of java error (null pointer) or something; it crashes without so much as an image appearing other than 2 seconds of black screen. This game is captivating.
vapor63 said:
I'm still curious as to how you have it running on Eclair. My logcat shows some sort of java error (null pointer) or something; it crashes without so much as an image appearing other than 2 seconds of black screen. This game is captivating.
Click to expand...
Click to collapse
Did you get the apk from the market? I could shoot you my apk, but if yours is from the market it's probably the same.
Yeah, the game is pretty awesome. I'm bummed it's not working on Froyo.
Gun pros works on an autonootered 1.0.1. I haven't updated to 1.1.0 yet as there was no real benefits of the update. I hqvent done anything special and i never uninstalled the previous 1.1 gun pros. Just installed over it.
sent from my NC
Deadphyre said:
Gun pros works on an autonootered 1.0.1. I haven't updated to 1.1.0 yet as there was no real benefits of the update. I hqvent done anything special and i never uninstalled the previous 1.1 gun pros. Just installed over it.
sent from my NC
Click to expand...
Click to collapse
Good point.
I had it working on 1.0.1, too. Never tried it on 1.1.0, because I have moved on to Froyo. Since it's flashable now.
It's the weirdest thing. I had Gun Bros working just fine on 1.0.1 and I was upset that Caligo Chasers wouldn't save my game progress, so I was content at the time just playing Gun Bros. Now, I've upgraded to 1.1.0 to get the benefits of the B&N in-store stuff (which works great, I might add) and now I can't play Gun Bros, but Caligo works perfectly. Six of one and half dozen of the other, I guess. Now, if only Storm8 would work on getting iMobsters to work on the NC....
So after going from 1.0.1 to 1.1.0, to Froyo, then back since Evernote was broken, I've reverted all the way back to 1.0.1 so I can play Gun Bros.
I set Chainfire 3d to these settings for Shadowgun.
In Chainfire3d: Default OpenGL settings
Reduce texture quality
Reduce texture size
Disable MapBuffer emu
The download of the additional files gets to 100% and then it crashes. Any idea on how I can get it to finish?
I have it on my XOOM, where in its file structure can I just copy it over to my Nook? Thanks.
I just copied over the entire com.madfingergames.shadowgun folder from my SD card on my phone and put it on the sd card for my nook. After doing that I started the app, it downloaded past 100 percent, but started right up. Plays perfectly so far.
You guys got shadiwgun working on this wow make me regret giving my nook to my wife and getting a Acer iconia tab
Lol
Sent from my A500 using Tapatalk
Mine works until its loading the first level. I can see the intro flawlessly, but when it finishes or is skipped I crash after a while in the loading screen. I don't get FC it just got back to previous screen (Chainfire)
it plays. very stuttery and jerky past the first level, but it still plays. When I first bought the game i couldn't get it to play but if you know how to search right, you can find a version floating around that has been optimized for none dual core devices.
That's the best I can give you. I paid for the game so i won't direct anyone to a pirated copy, but there is one floating out there that doesn't need tegra.
I tried the low version and still got same result. Maybe there's something wrong with my sd cache files since it kept freezing during the download...
Sent from my NookColor using Tapatalk
Here is what I did to get it to work:
1) Get ShadowGun v1.0 and SD files
2) On Chainfire3D go to default open gl settings
3) Set plugin "NVIDIA", check "reduce texture size", "disable mapbuffer emu" and "hide cf3d id" (check reduce texture quality if you want better performance)
4) Run game.
5) ???????
6) Yeah... Profit!
How do I get it from the market is says my nook color is not compatable?
The market version isn't going to work. You have to google for it.
Where do u get the plugin from? Can anyone help?
google "chainfire 3d plugins". you should be able to find it. By the way, the plugins are zip files, once you've extracted them from the file you download just put them on the root of your sd card and install from the program.
I have tried several times, but it will not find my plugin file. I downloaded the correct one and used drop box to put it on my nook. Can anyone help thanks
The files:
libGLEMU_QUALCOMM.zip
libGLEMU_POWERVR.zip
libGLEMU_NVIDIA.zip
need to be on the root folder of your SDcard.
Don't forget that you need to "install plugins" before "Use plugin/Load a plugin"
Igot that done, but now it bombs out after it gets to 99% of the first download. Any suggestions?
I had it bomb on all of the downloads. It you keep trying, they usually download. Did you try installing the sd files? When I did it caused me to freeze on the downloads. Keep trying, took me awhile... Nothing like downloading til 99% then freezing.. drove me nuts
Sent from my NookColor using Tapatalk
well I got everything installed, and the game seems to run smooth, but my controls aren't on the screen.....
-_- Are you kidding me..
Read my graphically intensive games thread (includes Modern Combat 3, NOVA 3, Dead Trigger, Shadow Gun, and Mass Effect Infiltraitor) for any games info and how it works, why it works, and how to do it yourself. No Chainfire is needed. Shadowgun and Dead Trigger can even be downloaded from the Play Store. Im not trying to sound like an ass, but make sure you SEARCH before you post. I had to learn it the hard way xD
All the stuff in the thread is CM7 and CM9 compatible.
well I got everything installed, and the game seems to run smooth, but my controls aren't on the screen.....
Click to expand...
Click to collapse
I'm having the same problem running cm9 unofficial.
Sent from my NookColor using xda app-developers app
I think this may be my first post on XDA. I roam XDA, Rootz, and AC all the time but rarely find a time that I can contribute to others so I generally keep to myself.
Absolutely love my TP running CM9 alpha0.6...
From time to time I have issues with getting apps to work. Normally I can figure out a way to get the app side loaded and working but this has not been the case for GTA. When the app first hit the market I paid for it and downloaded. I have always got the same message after opening the game.
"Unfortunately, GTA III 10-YEAR ANNIVERSARY has stopped."
Obviously i have downloaded the data files from a site and put in the correct folder on my "SD card"..still no luck.
Maybe I have downloaded the wrong data .rar files? Which ones are working for others?(I read HTC Sensation files work in other threads)Where did you download them?
Are there any changes I need to make in order for the game to work?
Any suggestions would be helpful...i have wasted a lot of time on this.
Was helped by another member. Went through the market to update the app. was able to download the files and play afterwards.
I have the same issue with the Madden 12 app. It starts downloading some 300MB update, but then just quits and tells me to try later.
Sent from my Spud Gun using xda premium
Since I never wiped my SD card when upgrading from CM7 to CM9 all I had to do was install GTA and it launched using the files downloaded while on CM7. On CM7 I had downloaded the files on wifi, not sure if this works in CM9.
You can find the files already downloaded in an archive on the internet, just pick the correct GPU brand and it should work if you can't download on the Touchpad.
I have download the data direct from Wifi with no problem at all !
If you have save data, you can backup the file from "/sdcard/Android/data/com.rockstar.gta3ger/files/GTA3/GTA3sf*.b" before you re-download the data.
I have a silly question, when I upgrade my S2 to ICS 4.0 with many cook roms, i use titan backup to restore asphalt 6. When playing game, I could not play the game because it freeze all times. Anyone faced same problems like me, and any solutions? Sorry for my bad English. Thank you
do not restore from GB to ICS, install the game and play and see if that hapens.... still happen wipe and check again
Happen again
atifsh said:
do not restore from GB to ICS, install the game and play and see if that hapens.... still happen wipe and check again
Click to expand...
Click to collapse
I have already deleted all data, and downloaded new game and new data. But the problem still there. When coming in the game, i could played few mintues before the screen frozen and the game force close. Hix, tried many times and not successful. Please help.
Let someone who has the game reply. I dont have that game.
Sent from my GT-I9100 using Tapatalk 2
Odd, I have the game and no freezes.
Kaze105 said:
Odd, I have the game and no freezes.
Click to expand...
Click to collapse
+1, I installed the updated version from Play store yesterday, no problems. I noticed Riptide kept pausing itself after a few stages though, may 2 in an hours play
I have similar issue on Acer iconia tab a500 with ICS, launch game and get msg says "cannot play video" then after press OK twice just get a black screen.
Originally thought it was just ics update issue with unstable apps on a500 till I got all the rest working.
Have sent email to Gameloft. No reply as yet
well i got the game and it tends to get sloppy after a couple of hours playing but it doesn't freeze or FC
Legit app
Did you get the app from the Play Market or other source?
And what ROM did you use?
have installed this (MOD)(BL1.2ROM-CM-10)SmOoTh_BeAn_4.1.2(G-tablet)(Updated 11/10/12) and lock screen has graphic glitches. need fix to make this rom work correctly
dragonfixed said:
have installed this (MOD)(BL1.2ROM-CM-10)SmOoTh_BeAn_4.1.2(G-tablet)(Updated 11/10/12) and lock screen has graphic glitches. need fix to make this rom work correctly
Click to expand...
Click to collapse
This is apparently expected behavior at this point. If you have less running in the background, it won't happen. If you reboot, you should see it stop until you've got too much going on.
I have had good success messing with the performance settings and ultimately using the "V6 Supercharger" with this rom. The lock screen is much more reliable for me now. Do a search for it in all forums and I'm sure you'll find the thread.
mount sd card issue
Hey guys, I installed the latest smoother bean and everything is flawless but my SD card does not mount. It is inside the tablet and in settings there is an option to mount the SD card, I press on it but nothing happens. Is this common?
richardtribes said:
Hey guys, I installed the latest smoother bean and everything is flawless but my SD card does not mount. It is inside the tablet and in settings there is an option to mount the SD card, I press on it but nothing happens. Is this common?
Click to expand...
Click to collapse
Reboot with your sdcard in then check in file manager to see if it mounts properly.
Sent from My SmoOther then yours Gtablet
Tasker - Your device isn't compatible with this version
I am getting the dreaded "Your Device Isn't Compatible with this version" error in Google Play for tasker on this ROM. I didn't have this issue with GHarmony ICS. The tasker developer says it is a ROM issue.
Anyone know of a quick fix?
The good old Market Fix will get you back up. Google is your friend.
Sent from The Darkside using xda app-developers app
I really liked Smooth Bean but I couldn't use it because a lot of games were incompatible with it. The games would load up fine but then freeze at certain screens. It was a different screen for every game, but it was always the same screen for that particular game. The few that come to mind are Cut the Rope HD, Slice It!, Jewel Star, and Open Sea.
nobe1976 said:
The good old Market Fix will get you back up. Google is your friend.
Sent from The Darkside using xda app-developers app
Click to expand...
Click to collapse
Still an issue even after repeated attempts at market fix.
wuench said:
Still an issue even after repeated attempts at market fix.
Click to expand...
Click to collapse
What DPI setting are you currently using? I have seen a lot of fixes when using a 160 DPI and are you using the latest version 1.4.2 with the addon's that have to be loaded up after initial install?
Sent from my tervigon using xda app-developers app
---------- Post added at 02:55 PM ---------- Previous post was at 02:51 PM ----------
Nash Enders said:
I really liked Smooth Bean but I couldn't use it because a lot of games were incompatible with it. The games would load up fine but then freeze at certain screens. It was a different screen for every game, but it was always the same screen for that particular game. The few that come to mind are Cut the Rope HD, Slice It!, Jewel Star, and Open Sea.
Click to expand...
Click to collapse
I have been playing some hardcore games such as FL Commando, Dead Trigger, and with the latest audio fix was able to get Speedx 3D to run without any hiccups. I haven't heard of any issue with game play with latest addon's that are linked in the OP.
Sent from my tervigon using xda app-developers app
nobe1976 said:
I have been playing some hardcore games such as FL Commando, Dead Trigger, and with the latest audio fix was able to get Speedx 3D to run without any hiccups. I haven't heard of any issue with game play with latest addon's that are linked in the OP.
Click to expand...
Click to collapse
Okay, I'll re-flash and apply the add-ons to see if it'll work.
nobe1976 said:
What DPI setting are you currently using? I have seen a lot of fixes when using a 160 DPI and are you using the latest version 1.4.2 with the addon's that have to be loaded up after initial install?
Sent from my tervigon using xda app-developers app
Click to expand...
Click to collapse
I am using the latest, just downloaded it today, barebones version. I just installed the GHarmony JB ROM and it had the same problem. I then went back to the GHarmony ICS I was using previously and tasker install was fine. I tried to take the build fingerprint out of the build.prop from HarmonyICS and apply it after installing Smoothbean and run market fix and still can't load tasker.
ro.build.fingerprint=asus/WW epad/EeePad.4.0.3/IML74K/WW epad-9.4.2.21-20120323:user/release-keys
It looks like the GHarmony ICS rom which works was 120dpi, and I am running 120dpi on smoothbean...
I may just have to load the ICS rom and try and backup the apk, reload jb and install...
Do others using this ROM have tasker installed? It may be that I am doing something wrong with the market fix, it seems like there are several versions of the instructions out there..
Nash Enders said:
Okay, I'll re-flash and apply the add-ons to see if it'll work.
Click to expand...
Click to collapse
Okay, doing that helped with the games. However, some apps still don't work. For example, the weather app, Eye in Sky, shows up in the Play Store as incompatible with the device, so I tried to side-load it and it wouldn't install. It just says "app not installed." Should I change the build.prop?
Edit: I think my problem with Eye in Sky is the same as wuench's problem with Tasker.
You guys might want to think that it is the app and not the ROM. The same thing happened when ICS Started out with HBO GO for me. Not all apps have been converted to work on the Jellybean framework. They may seem almost the same at most points, but since I just ripped through a crap load of HTML files and smail files as well. They are quiet different. I am sorry that those particular apps will not work, but the best suggestion I can offer is contact the app developer. My current work is using a clone base of a Motorola Xoom which is widely supported in the Play Store Market. When it come available for compatibility then it will work, trust me.
Sent from the Darkside Via ME.
Yeah, I don't know what it could be. Eye in Sky works with Dirty Bean. It shows up in the Play Store and it can be side-loaded for that ROM. Oh well, it's not the only weather app. It has a nice UI, though.
Well, tasker will not install from the backup. I found the developers website and downloaded the apk directly, that install failed as well. I found a reference in their forum about needing the maps library installed, I was going to check the logs for errors but I can't find a log viewer application that works on Jelly Bean ATM. It sounds like some permissions were changed for log viewing and a lot of the apps need to be updated.
It seems like a really great ROM, these app issues are the only things I have noticed. I think you are right, these developers just haven't had time to support JB yet...
wuench said:
Well, tasker will not install from the backup. I found the developers website and downloaded the apk directly, that install failed as well. I found a reference in their forum about needing the maps library installed, I was going to check the logs for errors but I can't find a log viewer application that works on Jelly Bean ATM. It sounds like some permissions were changed for log viewing and a lot of the apps need to be updated.
It seems like a really great ROM, these app issues are the only things I have noticed. I think you are right, these developers just haven't had time to support JB yet...
Click to expand...
Click to collapse
Ok, looks like Tasker installs ok on BlAcK_jElLyBeAn CM10 4.1.1. Maybe all it needs are GApps? Does anyone know where to get that as a package? I tried installing Google Maps on Smoothbean and that didn't help....
Like i stated in other reply. Framework res difference. Black Jellybean is a 4.1.1 vs. Smoother Bean is 4.1.2. Black Jellybean is using team DRH as a base that's why it works.
Sent from my DROID BIONIC using xda app-developers app
nobe1976 said:
Like i stated in other reply. Framework res difference. Black Jellybean is a 4.1.1 vs. Smoother Bean is 4.1.2. Black Jellybean is using team DRH as a base that's why it works.
Click to expand...
Click to collapse
The apps work on my Motorola Xoom running stock 4.1.2.
Yes it does but you cannot run this framework.res from this device to another device. Each device has a different framework-res configuration. There is a lot of changes that need to be done and since I am still considered a novice dev. I am learning the different things to do with the ROM in order for it to work.
Sent from the Darkside Via ME.
Status 7 assert failed getprop ro.prod.device Smooth 4.1.2
Hi,
I am coming from FB Reunion and Smoother Bean 4.1.2 will not install. Gets "assert failed" error code 7, ro.prod.device and ro.build.product.
I reinstalled FB and retried as some of the threads suggested with no change. Any help appreciated!!!
Thanks
RESOLVED- Needed latest CWM