Related
This is just a quick post with my comments on the invisible shield, in case it's useful to somebody looking for a screen protector...
Pros:
- Thick, feels very protective. No worries about putting it in a pocket and getting it scratched from keys or change
- Air bubbles really do work themselves out after a few days of use, even on a completely ham fisted install!
- Doesn't affect screen, you can still see it in daylight without rainbow or mirror effect.
Cons
- B****rd to install. Way fiddly because of all the little corner flaps and cut out bits.
- Slightly sticky to the touch means finger glide action isn't what it could be. Also scrolling with a stylus seems much more hit and miss than without the protector
- Not particularly cheap.
I'll be keeping mine - I'm mainly concerned about protection (which it should excel at) and with a little adaption you can get used to the decreased screen sensititvity. I find using the back of the fingernail to scroll actually works better than a finger.
As an aside, the best protector I had in terms of a balance between feel and protection was a generic cut-to-size one from Palm! Unfortunately it only covers the display part of the TP2 front, it's not big enough to cover the whole front.
Hope that helps someone!
Marc.
Hmm, i was thinking just installing the back part for scratch protection and keeping the normal screen protector that comes with it, i find that the protector that comes with it gives it that capacitive feel to it in that the screen doesnt push in as it used to without the protector ... because honestly i dont think the screen feel and senstivity is something i can compromise .. my 2 cents
omarbadr36 said:
Hmm, i was thinking just installing the back part for scratch protection and keeping the normal screen protector that comes with it, i find that the protector that comes with it gives it that capacitive feel to it in that the screen doesnt push in as it used to without the protector ... because honestly i dont think the screen feel and senstivity is something i can compromise .. my 2 cents
Click to expand...
Click to collapse
That's what I did
omarbadr36 said:
Hmm, i was thinking just installing the back part for scratch protection and keeping the normal screen protector that comes with it, i find that the protector that comes with it gives it that capacitive feel to it in that the screen doesnt push in as it used to without the protector ... because honestly i dont think the screen feel and senstivity is something i can compromise .. my 2 cents
Click to expand...
Click to collapse
I forget to inform them not to apply the Raceshield screen protector as it is too thick and it gives a funny and unresponsive feeling when you touch the screen.
I might change the screen protector to Martin Field instead.
does the invisibleshiled protect my device when it´s falling down to the ground?? or will the phone be damaged??
djkasmic said:
does the invisibleshiled protect my device when it´s falling down to the ground?? or will the phone be damaged??
Click to expand...
Click to collapse
Invisible Shield protect your device from scratches only.
If it falls onto the ground, it'll damage your phone for sure.
Get a pouch or a case if you need that kinda protection.
i have just installed the invisible shield on my touch pro2, not particularly hard, because I have lots of experience installing these.
But if you are a noob, it will be very tricky.
Even if you install it properly, you might still get dust or dirt underneath, and you may not realize it until it has dried up, which is too late.
I got some big bubbles underneath, waiting for it to dry.
I would only recommend the invisible shield for the back part, as for the screen, it is better to stick with a regular screen protector.
Scrolling and figure gestures are not as smooth if you use the invisible shield,
i will post pics up later! cheers.
I put my IS on last night. My impressions:
1. The back fits very nicely.
2. The front doesn't fit quite as well, but you can get it on with enough patience.
3. There are a few small bubbles, I'm still waiting for them to go away.
4. Today the bubbles are still there, and the front has a rather sticky feel to it. I don't like the feel.
5. The back cover sticks very well to the gell pad I use in my car. (bonus!)
6. I don't like the ridges on the sides left by the front cover.
7. If the bubbles don't disappear completely, I will find a replacement for the front cover.
Doesn't the phone come with a proective cover on the back already and a screen protector for the screen? I would have thought that would be enough?
DJ_Enigma said:
Doesn't the phone come with a proective cover on the back already and a screen protector for the screen? I would have thought that would be enough?
Click to expand...
Click to collapse
The 'cover' on the back is just part of the back's design.
And the screen protector that comes with the phone, well, not sure about everyone else, but mine peeled off within a few days of it going in and out of my pocket.
leginag said:
The 'cover' on the back is just part of the back's design.
And the screen protector that comes with the phone, well, not sure about everyone else, but mine peeled off within a few days of it going in and out of my pocket.
Click to expand...
Click to collapse
Does the cover on the back come off? I'm confused now.
DJ_Enigma said:
Does the cover on the back come off? I'm confused now.
Click to expand...
Click to collapse
The "cover" on the back, which can sorta be seen when you look at the volume rocker doesn't come off, which is why I said it's just part of the design.
You can place any protection you want on it.
could anyone please post some pictures of the invisibleshield on tp2??
djkasmic said:
could anyone please post some pictures of the invisibleshield on tp2??
Click to expand...
Click to collapse
Also, not just what it looks like on the physical device, but some good pictures of what the SCREEN looks like with phone on? So many screen protectors distort the screen image (thinking to my mother's ipod touch screen protector that makes the pixels all rainbowy and aliased looking) and I have yet to see ONE picture of what the actual display looks like when the screen is on.
tduck said:
So many screen protectors distort the screen image (thinking to my mother's ipod touch screen protector that makes the pixels all rainbowy and aliased looking) and I have yet to see ONE picture of what the actual display looks like when the screen is on.
Click to expand...
Click to collapse
Sorry, I have no photos to offer. I can tell you that the screen does look a bit "rainbowy" when I have polaroid sunglasses on. (When driving) It's enough to be a minor annoyance, no more. Still very easy to see the screen, which is a big plus comin from a Tilt that could not be seen at all in my roadster.
Also, as a general follow-up to my earlier rant-
All the bubbles have worked out, and I've grown accustomed to the sticky face. So I will keep the IS on my TP2. I really likethe idea of the phone being well protected from all the abrasive items that find their way into my pockets.
Does it really help to have a screen protector on STR? My nook is always inside a case, and always have some finger smudges on the screen, which does not interfere with reading the screen content.
Would it make the screen harder to use, such as in a resistive screen? I know it has IR technology, not resistive lcd, but it is good to know...
I have a screen protector, because I have cats and dogs who're lurking around my nook, and I'd hate to see them scratch the screen. I'm not using any case for it. The film does not affect the touch sensitivity in any way...
thanks for the info, emarusceac.
I can see dogs and cats and stuff being a problem. I just have an old NC sleeve laying around that works. If you can stand the wait, ebay is cheap Turns out the NC and NST width is the same...
emarusceac,
what sort of screen protector are you using?
Hi mh127,
I'm using a basic anti-glare screen film from ebay.
The nst is the first touch screen I have not used one on.
It is perfect now, the matte should hide small scratches, it gets used more lightly than phones/tablets, it is light (less damage if dropped), and it is cheap!
I am going to buy one.
I must warn you that it's VERY hard to apply it smoothly. I mean you'll get some air pouches caused by small particles, those bubbles won't go away no matter what you do. I prefer bubbles to permanent scratches though....
emarusceac said:
I must warn you that it's VERY hard to apply it smoothly. I mean you'll get some air pouches caused by small particles, those bubbles won't go away no matter what you do. I prefer bubbles to permanent scratches though....
Click to expand...
Click to collapse
I ordered one. Was concerned that it would be tough to apply because of the high frame around the screen. Any tips how to apply well? You use a credit card to smooth the film down over the screen?
Oh one more thing. Has anyone tried removing one? Does it change or damage the screen in any way?
I have had several different screen protectors on my NST and none of them caused any damage when I removed them. I would note though that I have read that you must not apply a screen protector to the Glowlight, something about the built in screen protector and its light guide properties. I would also point out the one reason my NST has had multiple screen protectors is because they are so hard to apply without getting bubbles/lint between the screen and the film. The film I have on now I finally got applied without any bubbles/lint in the reading area, so it will hopefully be on there for a while. Make sure you are working in a CLEAN area and take great pains to get it lined up straight before actually applying it to the screen.
The NST doesn't need a screen protector, it really wont do much for the device, but if you really feel like spending the money for it go ahead.
The NSTG already has a protector built in, putting an extra one on would be like putting on an extra pair of latex gloves. It'll offer a little more protection, but it can get to be quite frustrating in terms of lost control. It's advised not to bother with a protector for the NSTG.
Personally unless you know you're going to have your NST in reach of creatures with claws, or lose objects with sharp edges the protective screen will do little for you. Even in those cases it's possible the screen would merely lessen the damage done rather than prevent it out right.
In regards to the NSTG and it's pre-installed screen protector, has anyone actually removed it? I've read lots of reports of people complaining about minor scratches and finger pressure marks causing the light to become very strong on those parts, wondering if removing the screen protector would fix that or whether it's instead a problem with the screen.
Xadious said:
In regards to the NSTG and it's pre-installed screen protector, has anyone actually removed it? I've read lots of reports of people complaining about minor scratches and finger pressure marks causing the light to become very strong on those parts, wondering if removing the screen protector would fix that or whether it's instead a problem with the screen.
Click to expand...
Click to collapse
They claim there is one, I claim they lie as there is no visible edge of one. If there was you wouldn't get the light flares from minor scratches. Adding one may protect the screen but no idea what it would do to the light guide properties of the screen. If you ever have to remove it I'd worry what would happen to the light guide layer.
Because gadgets capabilities/sppecs increase rapidly & prices drop fast too, unless it's expensive I forget about screen protectors if the device is cheapish (got mine cheap) & if it will be outdated in a couple of years. Specially if it's not an outdoor device like my phone. Or if the protector hampers speed / functionality to some degree. Also personally I rarely scratch tab screens unless it's a phone, my phones/tabs all have protectors put on from day one, but not doing my NTSG. YMMV.
Hi guys,
Is there a pre applied screen protector on the Tablet S? Looking closely at the corners of the screen to does look like it but I haven't found any confirmation of this. I have a scratch on my screen and would obviously like to fix that.
Note that it was exactly like this on my Sony Ericsson Xperia arc where I just removed the pre fit screen protector and found a perfectly unscathed glass screen below. SE however declares that they apply a "shatter proof film" to avoid cracked glass displays
Can anyone confirm for the Tablet S? Has anyone tried to remove it?
Thx
Mine never came with one lol
Are you sure? Looks exactly like my phone. You would never have guessed it is there and you need to look really closely.
I bought one last week, and I can confirm there is a screen protector on the Tablet. I bought it in The Netherlands
- SnEAky
Yes, there is indeed one applied from factory, just as there was with my Xperia Play. I did go ahead and add an anti-glare protector on top of mine so I essentially have two protectors on mind now, but I think for most the hassle and frustration of trying to apply a protector without dust/air bubbles etc, simply isn't worth it as you are already protected.
There is a screen protector on the Tablet S just like most of the Android phones from SonyEricsson.
It is quite different from what you can get in the market. The screen protector from the factory is to prevent cracks or breaks. The screen protectors selling on ebay or whatever amazon are for anti-scatching.
I was recommended not to removed the factory screen protector on my X10 once before but I did it. After removing the screen protector, the glass is quite fragile like iphone's. It ends up with cracks at the edge when I dropped my phone from my pocket. Because I was sitting at that moment, the height is approx. 30cm.
Sorry for my bad english.
Mine has a screen protector. It's a 16gb one from the US.
Thanks, looks like the scratch is just on the screen protector then which is good news
On Xperia phones we know it's fine to remove (providing you don't drop it) but would like to hear from someone with a Tablet S. The my scratches aren't big enough to motivate the increased risk of breaking the glass, yet at least..
I have scratch on my screen already, so worry... now since everyone said there is a screen protector I feel better...
It seems redundant to put another screen protector over the factory installed. I can tell there is one on mine since it feels like plastic when I touch the keyboard...Is everyone still putting the sony screen protector over the factory installed?
I did, but it was a b*tch to do so with all the bubbles. But I managed to get them all, but one. See no reason why not use an extra screen-protection when you got one.
Has anyone managed to get this screen protector off the screen? It's a terrible dust magnet so i want to get rid of it and put on the "other" sony one.
daClaus said:
Has anyone managed to get this screen protector off the screen? It's a terrible dust magnet so i want to get rid of it and put on the "other" sony one.
Click to expand...
Click to collapse
I used a fine kitchen knife and peeled it of gently. I did it on the sony lcd-protection. Not the pre-installed one.
kryddan said:
I used a fine kitchen knife and peeled it of gently. I did it on the sony lcd-protection. Not the pre-installed one.
Click to expand...
Click to collapse
Have you found that the sony screen protector has reduced screen sensitivity... especially when typing?
can't said that I had. Did not play around with the screen before i placed the protection over it. It feels fine and responsive. The only thing is that it gets a little harder when it's hot outside and your hands gets warm, but that goes for all touch-devices I guess.
ditto
the matte finish is worth any loss in sensitivity, its fine with the official sony extra cover on and the matte is a BIG diff.
In fact it was a major selling point for me IMO, saw it in store next to the samsung tabs and the glare was hilarious. It wasn't until I was checking the box contents that I realised that the matte finish was due to an extra cover, but since that was part of the deal I didn't care. I didn't realise that it would have any impact on touchscreen sensitivity (?), in my experience with other devices I've not seen such an effect.
I also bought the matte one and applied it over the "other" (since there seems to be no way to peel it of) screen protector. The matte finish is great, and the touch feeling is much better than before. The original screen felt sticky and kind of rubberish when swiping with the finger, the matte one feels more dry. Great improvement!
Didnt get one in the Netherlands, but myn Tablet was a Demo machine in a store
I bought the official Sony protector and I actually really don't like it. I got it on with no bubbles or dust, and the matte finish looks nice when you put it on and feels nice when swiping etc.
Unfortunately, in my case, the touch sensitivity took a steep dive and made swiping vertical lists, vertical combo boxes, etc a real pain to do. By far the worst thing I've found is that the official protector leaves horrid fingerprint marks all over the screen, which kind of ruins the Sony's lovely sleek and shiny looks.
I love my Tablet to pieces, but the official protector I bought here in Australia is truly dreadful.
Don't be a fool, leave the factory applied protector on. It would be like peeling the safety film off of your windshield on your car. There is no practical benefit from doing it.
Either buy a clear aftermarket one or the matte Sony one, but don't degrade your tablet. If you have kids, however, encase it in carbonite ASAP.
So I've been using my Lumias for a while with a Skinomi screen protector. These are probably the best options for a screen like the one on the Lumia: the curved design makes regular plastic screen protectors (the only ones with a decent look and feel) useless on this phone, you can't even set them up properly; on the other hand, wet application screen protectors suck really bad: they have that orange peel look and feel, they give you that horrible feeling when swiping and look terrible in sunlight, Skinomi is no exception.
This got me thinking. I decided to go without a screen protector on my 400+ € piece of hardware. Am I just a mad man? Not quite (IMHO), here's why: gorilla glass can be scratched, that is for sure, but you're most likely to get only really thin scratches in the coating (given that you're careful), which can be 100% hidden with a wet application screen protector. So why would you go for one in the first place when your screen is still pristine, when you can still actually enjoy it? When you'll have the feeling that it's getting too much scratched you'll still be able to get a protector and have a fresh start.
What do you guys think? Do you still use protectors on your Lumias? Do you enjoy "freedom" instead? Please let me know. Maybe I'm just too OCD and crazy, but this phone and its amazing curved glass is giving me a lot of headaches. How do you deal with it?
vnvman said:
So I've been using my Lumias for a while with a Skinomi screen protector. These are probably the best options for a screen like the one on the Lumia: the curved design makes regular plastic screen protectors (the only ones with a decent look and feel) useless on this phone, you can't even set them up properly; on the other hand, wet application screen protectors suck really bad: they have that orange peel look and feel, they give you that horrible feeling when swiping and look terrible in sunlight, Skinomi is no exception.
This got me thinking. I decided to go without a screen protector on my 400+ € piece of hardware. Am I just a mad man? Not quite (IMHO), here's why: gorilla glass can be scratched, that is for sure, but you're most likely to get only really thin scratches in the coating (given that you're careful), which can be 100% hidden with a wet application screen protector. So why would you go for one in the first place when your screen is still pristine, when you can still actually enjoy it? When you'll have the feeling that it's getting too much scratched you'll still be able to get a protector and have a fresh start.
What do you guys think? Do you still use protectors on your Lumias? Do you enjoy "freedom" instead? Please let me know. Maybe I'm just too OCD and crazy, but this phone and its amazing curved glass is giving me a lot of headaches. How do you deal with it?
Click to expand...
Click to collapse
You're not mad, haha! You're just like me, I have a crap one on mine, I really didn't want to put a screen protector on, usually I'm good with my phones, but strangely, on the first day that I bought the Lumia, I managed to put a faint scratch on it, and that cheesed me off. So I put a half-ass martins on. Which is ok.
I've got a skinomi, and I've yet to put it on, I haven't ever put a wet screen protector on any of my phones, now based on your review, I don't want to. So I'm stuck on whether I should bother with putting one on or just taking it off completely and allowing the thin scratches.
p.s. phone currently at Nokia care centre...
Glad to see I'm not that weird Btw what do you mean by martins, maybe Martin Fields? I saw one of those on Expansys but apparently it doesn't cover the whole screen, so it will probably peel off easily like all of the non wet ones...
i didn't use a screen protector on my lumia - actually i've never used a screen protector before (i just know i'll put it on badly).
i also found the rubber-ish case provided is terrible for keeping your phone clean. somehow dust gets underneath it and just makes the phone look horrible.
Wiggy Fuzz said:
i also found the rubber-ish case provided is terrible for keeping your phone clean. somehow dust gets underneath it and just makes the phone look horrible.
Click to expand...
Click to collapse
Actually I think that the original case gets way less greasy than the phone itself (assuming you have the black one), the white one is a fingerprint magnet, but it's glossy so it's very easy to wipe...I also tried a few tpu cases, but they even make things worse.
The lumia it's a fantastic phone with a fantastic Gorilla Glass and a fantastic polycarbonate unibody, why you need to put something on this phone to protect it ???
look there
frenk_91 said:
The lumia it's a fantastic phone with a fantastic Gorilla Glass and a fantastic polycarbonate unibody, why you need to put something on this phone to protect it ???
look there
Click to expand...
Click to collapse
Maybe because you want it to stay beautiful for longer than a couple months
I've never used screen protector with 3 gorilla glass phones during 2 year time period and not a single scratch.
I've not bothered with a screen protector on mine due to the curves, and the screen is still pristine, although I never keep anything in my pocket with it.
Screen protectors sucks on every phone! I rather take a few scratches than using a protector that takes away all the good feelings from the touch.
In fact I already got a small small scratch. Doesn't bother me as much as a screen protector would though.
I'm using a Zagg screen protector (wet application) on mine. At least it adhered properly around the curved screen. Yes, it does feel different than the naked screen, but that is not necessarily a bad feeling. My $0.02
Well, right now I don't have one on. I have tried every brand, Skinomi, Zagg, Martin Fields and even some cheap one from eBay, but no luck: they either don't stay on at all or look crap with their orange peel effect. Wet ones are even worse: if a grain of dust gets underneath when you install them it gets stuck and you can't take it away by any mean, even washing them doesn't help. I ordered a Gadgetshieldz protector because I heard they're the best ones, but if it doesn't satisfy me I'll keep going naked, I'm sick of this crap, I just wanna enjoy the phone
Don't worry about the scratches guys. It's just the Oleophobic coating.
Anyway to hide those scratches, apply a small amount of clear car wax and wipe it off.
That coating does a great job by the way... my screen gets less finger-printy than previous phones.
Rusty! said:
That coating does a great job by the way... my screen gets less finger-printy than previous phones.
Click to expand...
Click to collapse
Yeah it's actually doing great. When you swipe It feels like you're not even touching the phone, it seems like a gesture more than a touch input. The SGSII I had before had a pretty smooth screen when naked, but it didn't even come close. Maybe the curved glass is helping increasing that feeling too. Day after day the idea of putting on a screen protector on this baby sounds more and more like murder. I guess I'll still be using one of those zagg-like protectors when I go to the seaside tho, sand can still screw up everything. The Gadgetshieldz thing I'm getting will help me through that I guess...
I'm not using a screen protector on my Lumia 800.
When I bought my phone, I wanted to; especially because I had 2 mini scratches on the screen within 24 hours of purchase.
Although it would be nice to have one, it's a bit of a hassle so I decided not to go out of my way to get one. I just try to be careful with my phone and the only cover I am using is the one provided for the body, but I'm even thinking about removing that.
Rare Earth said:
I just try to be careful with my phone and the only cover I am using is the one provided for the body, but I'm even thinking about removing that.
Click to expand...
Click to collapse
I'd like to go completely naked too, but given the form factor of the back I'd probably screw up the camera. As far as I can tell the glass on the Lumia is behaving pretty well, however you're still gonna get a few scratches in the coating in no time, regardless how careful you are. Honestly it doesn't bother me at all tho: the very tiny marks on the coating are only visible under a strong light, looking very closely at the phone which has to be sitting at a very special angle. With a screen protector I would get much bigger and annoying scratches, plus the hideous orange peel effect, which makes the screen really look and feel like garbage. I repeat, I can't murder such a beautiful design that way. I only hope that I won't get BIG scratches, those ones able to create that horrible rainbow effect. This is probably the only thing that would suck even more than a screen protector, but I'm not just careful, I'm literally obsessed with my phone, so it's highly unlikely to happen. Only rubbing sand at full force on the screen should have such consequences...fingers crossed
vnvman said:
I only hope that I won't get BIG scratches, those ones able to create that horrible rainbow effect.
Click to expand...
Click to collapse
I got one of those but it's SMALL. Like 2mm long fairly deep as yo can easily feel it if I want to but its sitting at the edge of the screen on the right side so I never notice it in my daily use. As I said earlier. I rather take those scratches than using a protector as it would bother me more than the scratches I get. Gorilla glass is good but it's no miracle glas by any means.
I managed to drop my brand new phone on the gravel (thank God it's my work phone) and got a really, really bad scratch that really annoyed me so I decided to get a screen protector so I wouldn't make everything worse.
I first ordered a Skinomi and while the fit was pretty decent I screwed up badly when putting it on and I wasn't about to order another one from the US. So I decided to try Copter (Swedish only brand I think?)
While it is originally for the N9 with a cut out in the bottom for the sensor it was in my opinion much, much better. It is a bit smaller then the actual screen but it is so thin, 0,178 mm, that I can barely notice it unless some dust get stuck to the edges.
There is a slight drag when using it compared to no protector but you just have to lighten up your touch and you won't notice. There is no orange peel affect at all and the best thing is that the bad scratch is gone, completely!
I would prefer not having a screen protector at all but since I know I'm clumpsy and will most likely scratch my screen even more I can highly recommend Copter. (If you can get it) In my oppinion it feels and looks ton better then Skinomi. My GF has a Zagg on here phone and in my oppinion that is crap in comparisson, thicker, more drag and an orange peel effect.
Sounds good, thanks for the tip. Anyway I could only find it here http://www.teknikmagasinet.no/db.pl...&title=Copter Displayfilm Nokia N9/Lumia 800&
But actually I don't understand a word so I really don't know wether they ship to my country or not :/
@dannejeanne: ouch, sorry to hear that. How did you manage to put that scratch on it? Did you drop it? If it can scratch that way without a particular reason this kinda sucks...
Hey guys, I'm just wondering what do you think the best screen protector for the Nook is?
I'm looking for clarity mostly, but feel is important too.
I usually wouldn't ask such a basic question, but after 20 minutes of googling there doesn't seem to be anyone who's asked this question before lol. I don't understand it either because I know not all screen protectors are made equally, so there has to be some comparison but I can't find anything.
Thanks.
edit: Then again, if I get a case do I need a screen protector? Hmm.......I can't even decide if I want a case or just keep it in a neoprene bag.
lettuceman44 said:
[...] edit: Then again, if I get a case do I need a screen protector? Hmm.......I can't even decide if I want a case or just keep it in a neoprene bag.
Click to expand...
Click to collapse
I tried serveral different screen protectors for my NST, but found that they all add a significant amount of glare. One of the best things about this device is daylight readability in direct sunlight, and they all ruined that experience, so I just do without.
I have mine in a silicone cover, and put it in a zipped rigid cover for travel. So far, so good. This thing cost so little that I'd rather maximize enjoyment rather and use it rater than obsess about its health. Carpe Diem and all that.
The NSTG doesn't need a screen protector, and adding one can actually cause issues, the NST only sort of suggests using one and honestly you'd be fine without one.
The thin sheet of material that comprises most screen protectors wont do anything to protect the NST/G screens. But it adds another layer between you and the text, and can block the infrared sensors on the Nook.