Can any one recommend a dock charger for my s2? I'd prefer if it also had a speaker, but I could live without one. Any suggestions?
I've been happy with the oem (samsung) dock. It does have a speaker. I think I ordered it through ATT, but wouldn't swear to it.
hchxoom said:
I've been happy with the oem (samsung) dock. It does have a speaker. I think I ordered it through ATT, but wouldn't swear to it.
Click to expand...
Click to collapse
If you're talking about this one, it doesn't actually have a speaker. That's actually just a port for the phone's speaker itself.
It does in fact have a speaker, but its fairly useless. I have the audio out hooked up to a Logitech speaker dock (leftover from an iphone).
It works well as a charging dock, but you cannot connect to a PC while docked. The dock only charges via wall power.
Related
Since HTC Dream isn't for sale here, no accessories are marked to be Dream compatible. There's however lots of Touch (and other HTC models) accessories available. Is it safe to assume that anything that fits the Mini USB of a Touch also works with the Dream? More specifically, chargers (mains and car).
/Mats
I've used the same mini-USB cable to charge my PS3 controller, my G1, and other devices.
I've personally used, g1 charger, g1 usb cable, BB charger, BB usb cable, moto RAZR charger, standard mini usb.... all of the above are 5V usb spec... only diff for the wall chargers is the aperage...
If your referring to other attachments such as speaker dongles and the like I would venture to say so since the port on the g1 is titled extUSB same as many other HTC phones
Nice - Just what I wanted to hear. Now I can go buy that HTC Touch/TyTN/et al car charger I found at a local shop, and plug it in with confidence. Thanks to all who have responded.
/Mats
ZilverZurfarn said:
Nice - Just what I wanted to hear. Now I can go buy that HTC Touch/TyTN/et al car charger I found at a local shop, and plug it in with confidence. Thanks to all who have responded.
/Mats
Click to expand...
Click to collapse
I tried the USB to 3.5 mm adapter, with controls for a handsfree and music (call, end call, mute, hold, play, stop, volume...) that came with my HTC Tytn II, and the G1 didn't react to it...
blazzr said:
I tried the USB to 3.5 mm adapter, with controls for a handsfree and music (call, end call, mute, hold, play, stop, volume...) that came with my HTC Tytn II, and the G1 didn't react to it...
Click to expand...
Click to collapse
I used the same MicroUSB to 3.5MM adapter that came with the G1 on my HTC Touch and it worked fine.. it didn't work on my BlackBerry 8830 however, but that one has a 2.5MM headphone out along with a USB out, which i can assume for file transfer.
How big of a difference does the amperage make in temrs of battery life ?
Ex 1 charger I have is 200mah the other 500mah.
Ill assume charging speeds will be different but will this cause any additional wear and tear on battery ?
I wish we had the same thing up in Canada, the Rogers Dream comes with its own proprietary USB dongle on the bottom. So when I lost my phone wall charger I am doomed to PC only charging.
KOF33 said:
...but will this cause any additional wear and tear on battery ?
Click to expand...
Click to collapse
It shouldn't. Anything with a LiIon battery needs a charge controller. The controller's sole job is to monitor the temperature and charge rate as the battery charges and keep it within a certain range. That's why "Battery Info" in spare parts shows the temperature.
It doesn't matter if you're charging from a USB A-to-miniB cable since the G1 will limit the power draw from the charger to 500mA unless the charger has some pins shorted in the USB connector.
Does anyone know if the MiniUSB port on the Dream supports a power OUT function? We are brainstorming ideas on getting flash (as in camera flash) onto the phone, and one idea is with an LED connected to the MiniUSB port
SolemnWishing said:
Does anyone know if the MiniUSB port on the Dream supports a power OUT function? We are brainstorming ideas on getting flash (as in camera flash) onto the phone, and one idea is with an LED connected to the MiniUSB port
Click to expand...
Click to collapse
Nope, no power available there. Why not hack it into an extended battery cover? There's lots of room to work, and you could even tap into the battery directly. Just watch out for shorting the battery terminals unless you like your G1 extra crispy.
Hi Guys,
I noticed that when I connect the universal connector to my pc or wall outlet, there is noise coming from the speakers. It's kind of a squeaky sound. Anyone else notice this?
Thanks.
Are you using the same outlet the PC is connected to? Try an outlet in another room.
Its a different outlet. The tablet is super quiet when not connected. Anyone have one they can test out .. it kinda sounds like a harddrive running but i never hear the sound when actually using the device
Just a guess.. maybe your charger is rated too low amps, or going bad. I have used 3rd party chargers that were cheap and caused the tablet to make a noise. But, with a good charger it stops.
Try substituting another (known good) charger and see if it still makes noises.
Good luck.
Whoops. I meant the universal connector port. The charger is the original asus prime one. All hardware and charger is original. No third party stuff.
Hey all,
I am thinking about getting the official Samsung car dock but had a few questions before I bought it:
1) In my youth, I heard that plugging and unplugging a device shortened the battery life. I am afraid that would be the case when I would charge my phone on the way home from work, when it's only like 40% still. Do these new batteries still have the shortened battery life problem when the charge cycle does not get complete? The same question applies to an alarm clock with phone dock that I am thinking about purchasing (know any good ones?).
2) I have a custom stereo with a USB input. Would it just work to go straight from the mini-USB to the stereo USB, and not need to use both the AUX output from the dock as well as the cigarette lighter? I guess using the AUX option I could bypass the issue in #1 above, since AUX doesn't charge it (mini-USB to USB does charge the phone), but I still prefer mini-USB to USB for audio quality.
3) This is a general question. My car originally had a two-din stereo, and I bought a 1-din with a compartment for the other din. Has anyone seen something that could go in the din to help hold the dock?
Thanks for any help!
The car dock sticks to your windshield or it comes with a plastic dics that you can permanently stick to the dashboard.
The dock comes with a cigarette/micro usb cord the connects to the dock. And for audio unless your stereo has bluetooth audio you will need to use a auxiliary 3.5m jack from phone to car.. That's how I have it set up on my car
Sent from my SAMSUNG-SGH-I777 using xda premium
Lekerstein said:
Hey all,
I am thinking about getting the official Samsung car dock but had a few questions before I bought it:
1) In my youth, I heard that plugging and unplugging a device shortened the battery life. I am afraid that would be the case when I would charge my phone on the way home from work, when it's only like 40% still. Do these new batteries still have the shortened battery life problem when the charge cycle does not get complete? The same question applies to an alarm clock with phone dock that I am thinking about purchasing (know any good ones?).
2) I have a custom stereo with a USB input. Would it just work to go straight from the mini-USB to the stereo USB, and not need to use both the AUX output from the dock as well as the cigarette lighter? I guess using the AUX option I could bypass the issue in #1 above, since AUX doesn't charge it (mini-USB to USB does charge the phone), but I still prefer mini-USB to USB for audio quality.
3) This is a general question. My car originally had a two-din stereo, and I bought a 1-din with a compartment for the other din. Has anyone seen something that could go in the din to help hold the dock?
Thanks for any help!
Click to expand...
Click to collapse
The car dock will not allow a USB connection to the USB port - it is changed to an analog audio output when docked.
As to 1) - That's an old rule from the days of ****ty timed chargers that would start charging a battery for a set period of time when you turned it on. No phone sold on the market today is set up like this - they all have intelligent battery charging circuits that can handle almost any plugging/unplugging pattern.
i was shopping for a oem Car dock that would work with our phones but also fit any case i wanted to put in the dock so heres the solution im ordering mine this week
http://www.amazon.com/iBolt-Vehicle-Car-Mount-Dock/dp/B008B0WNA6
Did you get it? How did it work out?
Sent from my HTC One X+ using Tapatalk 2
I've seen this one on amazon, Kidigi usually makes good quality stuff and - as it looks - comes with the insert as well so it could be used w and w/o case
http://www.amazon.com/Car-Charger-M...2&keywords=kidigi+charging+car+dock+htc+one+x
...comparison with the price of the iBolt ...looks like the same device to me.
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
J Cubed said:
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
Click to expand...
Click to collapse
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
TeK9samurai said:
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
Click to expand...
Click to collapse
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
I agree that the ibolt is a little clunky but i love it. Its really sturdy. It stays in the position you locked it down at. It's easy to dock the phone with 1 hand. I havent noticed any charging issues but i'll keep an eye on that now that you mentioned it.
interesting
and to think i was going to try and mod my Atrix toys to see if i could make them work.. .this looks way easier, wonder why they dont include the proper cable in the first place or if there are any other docks similar
techcontrol said:
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
Click to expand...
Click to collapse
Hello,
Well it's been quite some time but I didn't wanna open a new thread for this.
I'm using the iBolt dock for my HOX for quite some time and as told above it charges really really slow.
You might say it is caused by the cable, makes sense, but the charger I use to connect the iBolt is the geniune HTC car charger, which does charge the phone pretty fast.
Also, I exit car mode when I don't need it and turn the screen off in order to charge more, but it randomly and frequently turns the phone on. Sometimes just the Android homescreen but sometimes it re-launches the car app too. I was planning to call iBolt for this but I do not have much hope for getting detailed information about the output (actually the USB pin design) since there is no information about this on the web sites.
Can anyone confirm that it supports fast (normal) charging? It becomes useless beacuse of this issue.
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
techcontrol said:
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
Click to expand...
Click to collapse
Late thanks =)
After writing that message it came to me too and checked it, though it was saying that it is AC charging but I can swear to anything, whether car mode or screen is on, or not, it is not charged in 1000mA mode.. When I directly charged it with the genuine charger, it was fine.
So bought a 2amp car charger, and used its cable, and it works fine now.
May be, the genuine HTC charger CABLE and the iBolt are not quite friendly with each other. I remember Nokia's not launching PC Suite when it was not a genuine Nokia cable, may be a trick like that. iBolt does not like genuine cables or genuine cable does not like oem "sockets"
Hi folks,
For the first time in the two+ weeks I've had my Pixel 6, I needed to make a call using my office headset, which is a 3.5mm jack headset. No problem; I have a USBC to 3.5mm jack adapter I used with my various OnePlus phones (a 3T and a 6T).
I plugged it in but it didn't work; there was a message that it was an incompatible device. How strange; it worked on a Samsung tablet that was USB-C.
Is there something unique about the Pixel adapters? It's not a BIG deal, as I just bought one on Amazon for $10, but I find it strange that my OP adapter doesn't work as it seems fairly generic.
The pixel adapters pinout is different to normal ones. That or google adapters need built-in DACs. The only other company that I know of which does this is HTC.
PhotonIce said:
The pixel adapters pinout is different to normal ones. The only other company that I know of which does this is HTC.
Click to expand...
Click to collapse
Thanks for this. Hopefully I won't have other USBC surprises.
Oddly, one of my two apparently identical wall chargers won't work to charge this phone. One came with OP3T, one came with OP6T. Either can charge rapidly either of those phones. One in of them charges Pixel 6 (slowly) one of them won't charge it at all.
I got an Anker charger so I'm good, but this phone is a bit tweaky. I like it though.
Oneplus stream analogue audio via the type c port so just normal passive cable works fine. Pixel only streams digital audio so you need active cable with integrated digital to analogue converter (DAC) to work. Don't buy the apple one as it is too quiet on android.
Frankenscript said:
Hopefully I won't have other USBC surprises.
Click to expand...
Click to collapse
I'm pleasantly surprised the Google adapter works as well as it does. Wired headphones and buds sound as good as ever.
Thanks for these insights, guys! I ordered the Google one and should be able to try it out on Wednesday. Now, I understand I needed a DAC instead of passive connection.
I had a htc u11 (basically an attempt at a cheaper pixel, it even had pixel software), it only worked with a htc adapter or a google one, thats how i know. another thing i noticed is that my oneplus 8 pro charger doesnt charge my htc u11, so again, i can confirm that some oneplus chargers will not charge pixel phones.
Frankenscript said:
Thanks for this. Hopefully I won't have other USBC surprises.
Oddly, one of my two apparently identical wall chargers won't work to charge this phone. One came with OP3T, one came with OP6T. Either can charge rapidly either of those phones. One in of them charges Pixel 6 (slowly) one of them won't charge it at all.
I got an Anker charger so I'm good, but this phone is a bit tweaky. I like it though.
Click to expand...
Click to collapse
My 6t wall charger does not work either. However, my 6t USB c to USB a cord works for flashing via PC.
Just to cap this off, I wanted to point out that the wired bud style headset supplied by OP with my 6T works fine on the Pixel 6. That's part of my confusion... since the headset worked, I figured the headset adapter would use the same technology as the headset. But I guess that would be too easy. Apparently the headset I got uses DAC whereas the adapter was just a pass-through item.
Anyway, my Google adapter is due today from Amazon.
I have just tried my Samsung USB-C Headset Jack Adaptor on the Pixel with some AKG headphones and it seems to work fine.