hi all..i'm from malaysia..how can i reinstall my x10 mini stock firmware with xxxxxx006 baseband..last day i change my default.prop baseband to xxxxxx015 and my kernel to 2.1xxxx..then i update my e10i using SEUS..it successfully change my kernel and baseband to xxxxxxx015 and 2.1xxxx..but the problem is this firmware cannot detect signal in malaysia..telco in malaysia is celcom..and after this upgrade i'm not able to charge my e10i via usb on pc and its only can be charge using wall plug..after that i try to change to cyanogen mini mod..but its still the same..how can i get back my kernel and baseband to 2.0.0xxxxx and xxxxxx06 becoz my warranty was expired..please help....thanksss
hi bro
You can download sony ericsson update Service from here:
softpedia.com/progDownload/Update-Service-Download-180557.html
with this program you can rollback your phone to android 2.1 and fix your problems.
if show them message that say your phone have the last update are you want to continue press YES!
Good luck
thanks..i have done that bro..but result still the same..my phone still cant detect any kind of sim card..it shows 'please insert sim card'
try using flashtool and flashing with latest ftf firmware files given somewhere else in development section...
thanks..i'll try. the message 'please insert sim card' means what eh? that's mean my sim card slot is fail or that problem caused by software problem. my battery power also drain faster after change the baseband and kernel. somebody know about this please help me..Thanks
Related
I update my X10 failed with the update services now cant swtich on anymore...please someone help me...my X10's singapore version...
Check if you're branded or not and check what software version do you have
how to branded?i used the rootexplorer and changed the "ro.semc.version.cust" and "ro.product.name" to 1234-8465 under "system/default.prop"...after that i used the update services software to update 2.1 but failed...it said the installation failed...please disconnect the phone and make sure the battery fully charged...oh my god...now i switched my phone on it only show a exclamation mark there...zzz...please help me...
Uh-oh i'm sure someone will be able to provide you some usefull info soon...Sorry can't help you further
anyway,thx...anyone else can help me to solve it???
Try remove your battrey, place it back and see whether it work ?
i tried many times...still useless...Singapore version update 2.1 really hard...does anyone in XDA test the Singapore version update successful to 2.1??
I also have a Singapore version and changed the number using rootexplore to Nordic version. I'm downloading the firmware now, will see if it installs without any problems. I will let you know soon...beginning to get little worry
OK,please inform me immerdiately...i need the way to save my X10...
Remove your battery and wait 30 seconds, than put the battery back in the phone and connect it in to your pc while you're holding the back key (before you connect the phone to your pc, run the SEUS)
Sent from my X10i using XDA App
Ok, I was able to install without any issues. I'm running 2.1.
I think I saw a way to unbrick the phone using a debranding method. You might try searching. Good luck.
2.1 update No mobile Network
Can anyone help me out here everything else works great except i have no 3g. Im on rogers in Canada. did i miss a step?
(RESOLVED)hey guys, i've been looking everywhere for about 3 days now and really don't know how to resolve my phone's problem. I bought the rogers e10a version of the x10 mini and really wanted to update my phone to the latest 2.1 version. As most of us know, you have to debrand your phone first as SEUS as well as sony companion will tell you that 1.6 is the lastest version. Anyways i ended up using the "build.prop.claro" file from skzBR from this thread (http://forum.xda-developers.com/showthread.php?t=820009&page=4) while debranding and re-used SEUS to upgrade the phone to 2.1. Now when i used this build, i got the a claro logo when i booted up the phone and i didn't ike that, so i though i could just change the the build.prop in 2.1 to the other "build.prop.vivo"... well when i did that i felt really stupid after since i then remembered it was made for the 1.6 os. So now my phone is messed up! all i get is the Sony Ericsson start screen looping over and over again.
The phone does go into recovery mode, but does not have root permission through ADB so i can't push the old build.prop.claro file back into the phones system folder.. The SEUS and pc companion programs do not work to restore the phone and give me tell me my phone has no new software to update with. Even when i try pressing the repair option through pc companion get that same message. I've tried numerous flashtools with different rom with .sin files and have has zero success. So i'm wondering if i do have a chance at this if someone has the .sin files from both rom descirbe in the link and i try reflashnig it with the latest flashtool or if omnius is my only choice here.. any help really appreciated guys.
Thanks.
shouldve bought an evo
Sent from my PC36100 using XDA App
re:evo
not helpful, but thx.
Have u tried this:
Code:
http://forum.xda-developers.com/showthread.php?t=844219
RE: have you tried this
yes i have, the flashtool establishes a connection with the phone when i put it in recovery mode. When it says its flashing my phone, all ,sin files or a 2.1 generic rom seam to flash fine and whn done, it tells me " finished, now reboot phone", the phone is still stuck and looping. So i don't know if its because i'm not flashing the .sin files of the build.prop.vivo rom which i can't seam to find anywhere or what....
Hi, im a bit busy today. So just give you a link that you can try http://www.xperiax10.net/2010/04/14/debrand-your-xperia-x10-tutorial/
Hope it will help you.
i fixed it
I flashed the phone with 1.6 e10i firmware and the java flashtool and it worked. I then changed the build.prop file to a e10a file and reflashed. SEUS was able to reflasht the phone's firmware to 1.6 e10a and all is good now... thanks guys!
hi guys. i'm from malaysia. i have problems after flashing my x10 mini from 006 baseband to 015 baseband. i also flash the kernel to naA-08 kernel and install cyanogen mod mini. after installation succeed using the cmw and update.zip method i cant charge the battery anymore via usb and it can be charge using wall plug but my x10 mini can only hold 5minutes after that battery will empty. "please insert sim card" also appear. i used many kinds of sim card but nothing change. after that i use flashtools and seus to get back my stock firmware. after succeed flash with seus and flashtools the many times. the problems is still same. battery and sim card. really mess. please help....
sorry for my bad english
Hello, I have a sonyericsson xperia X10 suddenly stopped turning, i tried to repair it with the FlashTool, the flash process its ok , but at the end of the process and turn it , vibrates only once and not on the lcd (black), and when i reconnect to the PC, the phone is in flash mode again., pls which files or Fw additional need install first for repair?? thks for your time pd i use the fw x10i generic stock and pc companion not repair it display a error in upload the sw to phone.
Please use search tab all is there.Take your time and read.
thks for your time, itried all methods mentioneh in the posts but nothing work, for this reason i need help thks...
I installed a Rom that went wrong and had to use flashmode with sony's update program, not sure how it's called these days. I if you install that and plug it into the pc holding down the Back button, it recognizes it and will all you what you want to do. Select restore (or something similar). It'll restore it back to 2.3.3. After that you can install xRecovery again with flash tool.
Be aware that this worked for my semi bricked X10i, no guarantee it'll work for you ofcourse.......good luck
Sent from my X10S using xda premium
Thks, i tried this for 2 days, but in the Pc companion display the message " no exist software update for your phone", later, put on the phone and noting, only one vibrate and the lcd is permanently black, i put again to usb/pc and display the message SEMC flash.... , pls exist a solution for this issue??? thks
You only get that message when you plug in the phone too early
Update>repair>select x10i>then press continue etc>THEN connect phone.
And run stuff as administrator if you got w7.
Sent from my X10i using xda premium
I tried to repair with pc companion , but adter the finish os the process display ok , but the phone stuck in flash mode all time...
Yoy can try flashing a different kernel.Ive had all sirts of errors and failures,something always works.
Charge battery
Try other flashtool version
Try x10 flasher
sent by my x10i using xda premium
ok i tried this options thks
I tried with diffrent kernels but not working , exist a guide for repair this issue, my x10i its always in flash mode, flash with flash tool and again stays in flash mode
Use SE update service maybe it works for you..
Sent from my X10 using XDA
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help