Does anyone know to flash Mikrunny 1.06 on hboot 1.5 - HTC EVO 3D

Does anyone know to flash Mikrunny 1.06 on hboot 1.5 if so can you guide through it the times ive tried it hangs on the white htc screen thanks in advanced

I would assume you would flash it like any other rom. Flash kernel using Flash Image GUI or fastboot, then flash rom zip.

Gunna try it later
Sent from my PG86100 using XDA App

Mien651 said:
Gunna try it later
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
If you don't have the flash image gui app, just boot your phone into recovery using fasboot. From your computer, open up a command prompt, and navigate to the folder that contains your recovery.img. Then plug your phone in, adb reboot bootloader. Then it will be in fastboot. From there, type fastboot boot recovery.img (or whatever the name of your recovery.img is). Then your phone will boot to recovery and you can flash anything you want like normal. No need to flash the kernel separately or anything like that.

Aight thanks was able to flash with flash image gui thanks.

Related

broke recovery

I just flashed Olympus Trinity XE Version IV on my CDMA EVO 3D. My phone will now not boot into recovery. I can only boot through fastboot. But it sucks having to use the computer everytime I want to flash a quick mod.
Any help?
eyeisdasteve said:
I just flashed Olympus Trinity XE Version IV on my CDMA EVO 3D. My phone will now not boot into recovery. I can only boot through fastboot. But it sucks having to use the computer everytime I want to flash a quick mod.
Any help?
Click to expand...
Click to collapse
Try turning the phone on normally, then Flas Clockwork through Rom Manager!
Make sure fastboot is unchecked. Can you get to recovery if you battery pull and volume down + power?
Transformer Sent
I can walk u through steps to use fastboot to flash a new recovery if needed. Pm me
Sent from my PG86100 using Tapatalk
How to install with Fastboot:
Download the fastboot binary for your computer from HTC
Connect your phone and boot it into fastboot
Run fastboot with the command
Code:
fastboot flash recovery path/to/recovery-twrp-shooter-1.1.1.img
or
Zip Install
Rename the zip file PG86IMG.zip and place it in the root of your sdcard. Power off the device and boot up holding Power and Volume Down. Confirm the flash. Reboot your phone and remove the zip file from your sdcard root or rename it.
http://teamw.in/project/twrp/67
Thanks guys. I just wasn't sure if I could re-flash recovery.
Ill update once I get a chance to do it.
So the PG86IMG.zip method didn't work. I think its cuz I'm unlocked but still s-on. Ill try the computer method and get back to you guys.
eyeisdasteve said:
So the PG86IMG.zip method didn't work. I think its cuz I'm unlocked but still s-on. Ill try the computer method and get back to you guys.
Click to expand...
Click to collapse
flashing through fastboot will definitely work. I just switched from cwm to twrp last night. I am hboot 1.5.
Sent from my PG86100 using XDA App

Fastboot boot recovery vs pulling boot.img?

I know pulling the boot.img from the rom is the old way to do things then wiping in recovery and flashing the boot img in fastboot... Then flash the rom in recovery....
Or you could just fasboot boot recovery.img and wipe and flash the rom... without pulling the boot.img
Doesn't these two methods work just the same minus the fact that fastboot boot recovery is just quicker to flash a whole rom....
This is for the hboot 1.5 users.....
I know about flash gui im just asking about using ADB and recovery flashing.....
Either way works fine doesn't it...>< ?
Yes, booting into recovery vía fastboot allows simultaneous flashing of kernel/ROM.
You may also flash a custom kernel zip file in the same fashion.
Sent from my PG86100 using xda premium
intrlude said:
Yes, booting into recovery vía fastboot allows simultaneous flashing of kernel/ROM.
You may also flash a custom kernel zip file in the same fashion.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Ya that is the advantage of using the recovery via fastboot.... But other then that they both get the job done... Minus that fastboot lets you flash the whole rom instead of taking the boot img out.... along with custom kernels....
One stop shop
There's also a app called Flash Image GUI that works pretty good...

[Q] Can't flash new ROM. Goes to boot cycle after...

I am using TWRP 2.0 but I can't flash a new ROM. I currently have WARMTWOPOINTTHREE ROM backup, but I tried to flash a new ROM after wiping everything, and when it re-boots it just goes to the white HTC screen and then goes black and just repeats it self over and and over.
so i take the battery out and boot my back up from recovery. what do i need to do to be able to get back to installing whatever ROM i want.
i am a obviously a noob so whatever help anyone can provide will be appreciated.
i was trying to flash the ZR3D 1.2 ROM by the way.
If your phone is a gsm version try this rom:http://forum.xda-developers.com/showthread.php?t=1267131
I just installed it on my evo 3d and works smooth
no its CDMA
I would go to Cwm 4.0 for recovery had nothing but issues using the latest twrp . Worked fine for awhile then it didn't wipe right to causing weird issues . Funky things after the rom flashed .
Sent from my PG86100 using xda premium
need more info in regards to how you flashed your rom but at this point im willing to bet you have lost your Boot.IMG and also did you use GUI app from market i did this and that how i lost my Boot.IMG and if so you will have to go to your pc and exract the Boot.img from the rom you flashed and after you have exratced file go to that folder and scrooll down until you see the Boot.IMG file and you will have to copy and past it into the folder that you used when you first rooted you phone and go to the start menu and typ cmd and you will have connect your evo to usb and typ fastboot flash boot boot.img and this will it boot right up after you flash the boot.img file
jslim38 said:
need more info in regards to how you flashed your rom but at this point im willing to bet you have lost your Boot.IMG and also did you use GUI app from market i did this and that how i lost my Boot.IMG and if so you will have to go to your pc and exract the Boot.img from the rom you flashed and after you have exratced file go to that folder and scrooll down until you see the Boot.IMG file and you will have to copy and past it into the folder that you used when you first rooted you phone and go to the start menu and typ cmd and you will have connect your evo to usb and typ fastboot flash boot boot.img and this will it boot right up after you flash the boot.img file
Click to expand...
Click to collapse
If he is flashing the rom just the rom. Go to fastboot select . Fastboot boot recovery.img and wipe flash ur set. With a computer and your sitting pretty.
Sent from my PG86100 using xda premium
Im with reaper24 on this one.
Twrp cause nothing but issues. like not backing up my data correctly and having to redownload the ROM.
Im currently using clockworkmod 4.0.1.4. Havent had any issues with it.
Also have you read everything on ZR3D thread?
QUOTE-
***SPECIAL NOTICE: This rom is not for everyone! Some users have been unable to get past the splash screen. Please be sure you have a backup ready before flashing this rom. We are aware and working on this issue.
Thank you for your patience. However, 1.6 has been confirmed booting on some devices that would not in prior versions.***
Click to expand...
Click to collapse
iTzLOLtrain said:
Im with reaper24 on this one.
Twrp cause nothing but issues. like not backing up my data correctly and having to redownload the ROM.
Im currently using clockworkmod 4.0.1.4. Havent had any issues with it.
Also have you read everything on ZR3D thread?
QUOTE-
Click to expand...
Click to collapse
On his rom you will probably need to if still hboot 1.5 need to go to fastboot and fastboot boot recovery.img and wipe flash zero issues that method.
Sent from my PG86100 using xda premium

[Q] (BIG Problem/Question) Error after ROM Install. Please help.

i have been running Synergy Rom and causing a lot of problems so I have been tryin to install a numerous amount of roms and after wiping the phone back to factory and the dalvik then when its time to reboot the system i reboot the phone it just stays in the HTC boot up screen. so after a wait 10 or so min i just reload the Synergy rom which is the only one that works.
i am also running Revolutionary CWM v4.0.1.4 if that helps
i would really appreciate it if someone could point me into the right the direction thank you.
Are you on hboot 1.5? Are you flashing the correct kernel?
We're comin from a pure power source.
Yes it is and to be honest I haven't flashed them with any kernels cuz I never have before
Hmmmm, and you're doing a full complete wipe right? Which recovery are you using
We're comin from a pure power source.
Revolutionary CWM v4.0.1.4 and yes full wipe and dalvik.
Have you tried a different recovery?
We're comin from a pure power source.
nspyr05 said:
i have been running Synergy Rom and causing a lot of problems so I have been tryin to install a numerous amount of roms and after wiping the phone back to factory and the dalvik then when its time to reboot the system i reboot the phone it just stays in the HTC boot up screen. so after a wait 10 or so min i just reload the Synergy rom which is the only one that works.
i am also running Revolutionary CWM v4.0.1.4 if that helps
i would really appreciate it if someone could point me into the right the direction thank you.
Click to expand...
Click to collapse
ok as you know the roms come as .zips and we apply them through recovery.... some times that recovery doesnt writ the boot img correctly.... try installing ANY rom....then try to boot up... if it hangs at htc then pull the battery out then put it right back in and hold vol down and press power..then connect the phone to your computer so on your phone you see "fastboot usb"now the rom you tried installing that was the zip have a copy of that on your computer and open up with any program you use to open zips...extract that boot.img file to your fast boot file and where adb is too ,once extracted go back to your terminal window and type in
fastboot flash boot boot.img
it should say that its sending the data then writing it and then from there wait about 30 seconds and then select reboot and the rom should boot up
nspyr05 said:
Yes it is and to be honest I haven't flashed them with any kernels cuz I never have before
Click to expand...
Click to collapse
You cannot directly install ROMs with custom kernels on hboot 1.5 .
You always have to use "fastboot boot <your recovery>.img" or "fastboot flash boot boot.img" like the above post says..... If you dont use PC to flash ROMs with custom kernels , you will always get stuck on the HTC screen.
If you want to be able to flash ROMs / kernels / radios etc without PC, downgrade your hboot from 1.5 to 1.4.
Get flash image GUI from market to bypass fast boot and install custom kernels, or downgrade using unbeknownforce method and closeones live cd
Sent from my PG86100 using xda premium
Are you s off and if your knott you may need to use the GUI app from the market
Sent from my HTC EVO 3D X515m using xda premium
Idk if someone already said this but for 1.5 boot you need to go into fasboot usb . Fastboot boot recovery.img
Replace "recovery" with recovery file name. If your using 4.0.1.0 it might be. Cwm-4.0.1.4-shooter.img something like that
Second option is use 4EXT and you won't need to use your computer to flash rooms or kernels
Sent from my PG86100 using Tapatalk
First I assume you have the adb drivers.
place new rom on sd card
boot phone in bootloader, select fastboot
Access the adb folder via CMD
type in fastboot boot recovery.img
it should say waiting for device then connect..
you'll see the recovery screen
this will let you wipe and install new rom on hboot 1.5

[Q] How to flash a Kernel in HBOOT 1.5

H guys, i have a quick question. How can i flash a kernel in HBOOT 1.5? I have flashed with Flash Image GUI and in Fastboot when the kernel is an image(.img), but how can i flash in fastboot if the kernel is a .zip? I'm 2.17 and i want to flash a beta version of Needle @2.1 ghz. Thanks for your help.
What's recovery are you using?
Sent from my PG86100 using Tapatalk
iTzLOLtrain said:
What's recovery are you using?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I'm on 4ext right now but the guys says the best is install through the pc or you will end in a bootloop. I tried with flash gui but the phone went in a bootloop as some guys said.
Make a nandroid first. Then wipe cache & davlik cache and then flash the zip.
Root-Hack_Mod*Always\
luis4ever said:
I'm on 4ext right now but the guys says the best is install through the pc or you will end in a bootloop. I tried with flash gui but the phone went in a bootloop as some guys said.
Click to expand...
Click to collapse
boot recovery through fastboot using "fastboot boot <recovery name>.img" and flash the kernel.
But IMO , if that kernel didnt worked with Flash Image GUI, it will not work with "fastboot boot <recovery name>.img" either. Just try and post the results.
mnomaanw said:
boot recovery through fastboot using "fastboot boot <recovery name>.img" and flash the kernel.
But IMO , if that kernel didnt worked with Flash Image GUI, it will not work with "fastboot boot <recovery name>.img" either. Just try and post the results.
Click to expand...
Click to collapse
I have a friend and he showed me the fully working kernel on stock ROM for 2.17 @2.1 ghz!!! Quadrant rises up to 5200+ and antutu up to 8300+. I'm running meanrom right now but Idk if that matters. Also one explanation is that the kernel he gave to me was a wrong one.
From my experience I used the GUI app and thats when the problems started using that app I lost my boot.IMG and that causes the bootloop just flash the Rom the normal way and if you want to flash a different kernal you can just make sure you flash the kernal before rebooting for the first time
Sent from my EVO 3D x515m s off using xda premium

Categories

Resources