yeah i wipe the data and cache in recovery aswell…well i bought my s2 last year i never updated or rooted it..it was on same android version when i frst use it aftr unboxing…it was 2.3.3 i guess..i just factory reset it and clear data frm sd card in privacy….after i did it my phone restarts and frm then on it has loop issuee..actually i have tried every thng i found on intrnt about flashing stock roms via odin…i have tried numbr of roms wth single file and 3 file method even i have tried a stock flash rom I9100XXKI3….actually my phone is not flashing the rom i guess by odin..odin shows everythng is done properrly like not a sngle issue wth the odin but in real my phone i thnk not allowing to flash the rom every tym i flash i still got bootloop issue..m very tense and people saying ur bootloader is crashed and u cnt do anythng except to repair its hardware i dnt wanna unseal my s2
in download mode my phone is showing
product name: gt-i9100
custom binary download:no
current binary: samsung official
i have done proper flashing of various stock roms aftr bootloop issue but in real my phone doesnt flash any rom
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=1457458
Also to confirm, you flashed stock roms using odin and it completed without problems?
Related
Samsung Galaxy Y Pro B5510 stuck on bootloop, what to do?
I have tried to flash via odin, but i get firmware fail.
how far did the odin flash get until it occured an error to u?
If it didnt start the flash procedure u might whipe data/cash in the recovery mode to solve the problem
if this doesnt work or if the flash procedure already started befoure the error appered u should google for the right odin version for ur phone and try again cus the only way to bring your phone back to life at that point is reflashing a stock rom
Guys I was flashing few roms and then what I did I used odin to flash my ICS official rom that I downloaded from Samfire and now my tablet i.e. Samsung Galaxy Tab gt p6200 or 10.1 is just struck on the samsung logo n it is restarting by it on and then again struck to the logo. I can access recovery and download mode. I think hard reset would correct it but when m going in recovery mode then its clearing cache but not hard resetting it, the same is with CWM. I tries to flash with bootloader in odin but that also did not worked. I tried to flash honeycomb rom but then also the same error. Pls help me guys its really important! M Scared :crying:
cyruscooldj said:
Guys I was flashing few roms and then what I did I used odin to flash my ICS official rom that I downloaded from Samfire and now my tablet i.e. Samsung Galaxy Tab gt p6200 or 10.1 is just struck on the samsung logo n it is restarting by it on and then again struck to the logo. I can access recovery and download mode. I think hard reset would correct it but when m going in recovery mode then its clearing cache but not hard resetting it, the same is with CWM. I tries to flash with bootloader in odin but that also did not worked. I tried to flash honeycomb rom but then also the same error. Pls help me guys its really important! M Scared :crying:
Click to expand...
Click to collapse
I hope you've flashed correct rom for your tablet.
If not try to flash stock rom for your tablet, and do wipes(cache, data) from stock recovery
m3i said:
I hope you've flashed correct rom for your tablet.
If not try to flash stock rom for your tablet, and do wipes(cache, data) from stock recovery
Click to expand...
Click to collapse
its not wiping the data in recovery and now I'm able to go to the download mode but while flashing it fails and I'm sure that I'm flashing correct rom.
Hi, been reading lots about guides spent 3hr trying to flash my S3 LTE, prob was i tried cynagen 10.1, didnt like interface, so i tried to reflash a custom 4.1.2, that i used before. This is UK model. I had CWM on before ,Seems now i have get a loop on sumsung logo after every flash. I have tried diff roms the one i used before same thing. It doesnt have cwm on as i wipe and delte data and when i reboot with battery out it just show stock recovery. So I used odin to put cwm so i can wipe/ clear cache try install roms from sd but same loop.message says install aborted from sd install. I have even just tried kies a few times on recovery and still get loop. My counter is showing 12 now so dont know if taking it back to shop will get warrenty repair. any ideas where the problem is, as maybe i tried cyn 10.1 1st time and it got stuck on spinning logo as i didnt wipe/delete user data 1st. am at a loss of how to just flash any rom on to get it to work. Thanks also i have used odin to flash roms on but still same loop.
Flash stock Rom with Odin
Boot into 3e recovery and do factory reset
Are you sure you are flashing stuff meant for the i9305 and NOT the i9300?
I had originally flashed to I9305XXBLL3_I9305DBTBLL3_I9305XXBLL3_HOME.tar.md5 from stock and used for a while and even flashed bak a few times before using this rom, however reflashing this or using kies recover firmware after install process the green andriod man loads some stuff then goes to loop on samsung logo, i have tried many flashed, i dont understand y i wud get a loop on any flashes now it didnt before. surely there must b a way to stop the loop, I used kies 4 times to ugrade firmware recove using my s/n etc but it always seem to complete but loop, any suggestions, am tempted to bring to phone shop for warrenty and if they ask about the 14 installs i will have to say i used kies 14 times. thanks
kendo2222 said:
I had originally flashed to I9305XXBLL3_I9305DBTBLL3_I9305XXBLL3_HOME.tar.md5 from stock and used for a while and even flashed bak a few times before using this rom, however reflashing this or using kies recover firmware after install process the green andriod man loads some stuff then goes to loop on samsung logo, i have tried many flashed, i dont understand y i wud get a loop on any flashes now it didnt before. surely there must b a way to stop the loop, I used kies 4 times to ugrade firmware recove using my s/n etc but it always seem to complete but loop, any suggestions, am tempted to bring to phone shop for warrenty and if they ask about the 14 installs i will have to say i used kies 14 times. thanks
Click to expand...
Click to collapse
Remember to wipe data/factory reset
Tovagulet said:
Remember to wipe data/factory reset
Click to expand...
Click to collapse
i have wiped but problem is if kies connected and said firmware installed and still get loop. i have to run odin then install cwm to de able to wipe data any roms on sd card will error abort install. if i flash a rom and pull battery it will have normal download boot screen no options to wipe, so i have to run odin to get that option, now my counter is at 19 so any chance warrenty will repair this, its abt 2-3 months old only thanks, i cuould not get e3 to work
kendo2222 said:
i have wiped but problem is if kies connected and said firmware installed and still get loop. i have to run odin then install cwm to de able to wipe data any roms on sd card will error abort install. if i flash a rom and pull battery it will have normal download boot screen no options to wipe, so i have to run odin to get that option, now my counter is at 19 so any chance warrenty will repair this, its abt 2-3 months old only thanks, i cuould not get e3 to work
Click to expand...
Click to collapse
Flash stock Rom with Odin
Root it
Run triangle away
Flash stock Rom again
Factory reset
That simple
i cant find a stock rom for S3 LTE, just used a few that worked before the loop. I am gonna try reflash with kies again then try your method. One note, I normally been flashing then run odin for cwm then can access delete wipe. on cwm the error is 4 lines of E; cant mount xxx,
how would i run triangle away, do i need to find download file then use odin to flash, thanks
Right I ran kies to reflash stock rom still loop won't boot up. Recovery says counter 32, firmware Samsung, custom. Took back to shop today they gonna send away to Samsung so hope they will repair.
replaced
just to let all know i returned s3 lte back to samsung, told them it got stuck on loop, from kies recovery, i had custom binary on 33 and they just repaired back to me today with 4.1.2, am on EE uk, thanks if you helped
hey guyz i need your helpam puzzled to the core
i was running 4.0.3 in my beloved s2 and i flashed insecure kernel for rooting ma phone
This is where it all started
i flashed a ROM from xda
some rom for s2 with s4mods, and the phone didn't boot up so i restored my nandroid backup and the phone was back on
but it couldn't detect the sim card (tried many)
then i got pissed off and i went into the recovery and did a factory reset and formatted system and data and cache just to be sure
this is where i screwed UP
i formatted the emmc instead of sdcard!!!
now my phone gets suck in s2 screen and i was not able to flash anything then after googling up i did a PIT flash that cleared the way a bit
the stock rom that i tried earlier with odin was unflashable(NAND Write )
now i could flash it with odin and it is a PASS
and i rejoiced....but then again it got stuck at S2 screen!!!!
now am able to flash anything but of no use....
tried PIT!...only the particular kernel provides me with CWM rest dont....
help me out guys pls
...
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Try flashing 4.4 rom
Sent from my SM-N9005 using XDA Free mobile app
do you a full wipe every rom you try to flash ,it doesn;t work like that ,and search in forum there's a guide how to flash ,at least can you enter in recovey mode or download mode now ?
If you want to remove binary count search for triangle away
ok i will try flash to 4.4 but wait please a few minutes, i just uploading vid on youtube to show you all that "working" rom, i know how installing roms but its dont work, i know how to wpie and when do it bus seorusliy it not work...
and to use triangle away my phone must working, and thats problem.. i will show you that on vid just wait
and yes ofcourse i can enter in download mode and in cwm, just i say its only one rom with can boot.. stock and other roms stuck on sign "samsung i9300" stock roms stops at samsung logo and one of cyanogenmod starts up almost normal (u see what is wrong in vid) and is error with com.android.phone
VID is avalibe in first post
try to redownload zip file and try again ...maybe it should work . Happens to me once the same error ,i just rebooted in recovery mode ,did a wipe dalvik cache/ cache a factory reset and all went fine .
also you can try this https://www.youtube.com/watch?v=1iCq7fSqIqk (read the comments also)
switelolo124 said:
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Click to expand...
Click to collapse
You can download this ROM. It is 4.3 for Poland (Plus)
Please read the guides on how to flash properly. If you flash the wrong way, then you can end in trouble.
did this Rom has kernel inside ?
and guys... i KNOW HOW INSTALLING ROM, i just write like that to make it shorter
@edit
not working i told u guys its not working only cm11 without wiping plus stock aroma rom kinda working...
did is some way to installing firmware with odin but emerygency mode ? i doing that in galaxy s2 mini but i know its diffrend samsung.. but maybe.. ?
Did u try flashing rom without sd card ??
Sent from my SM-N9005 using XDA Free mobile app