Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Try flashing 4.4 rom
Sent from my SM-N9005 using XDA Free mobile app
do you a full wipe every rom you try to flash ,it doesn;t work like that ,and search in forum there's a guide how to flash ,at least can you enter in recovey mode or download mode now ?
If you want to remove binary count search for triangle away
ok i will try flash to 4.4 but wait please a few minutes, i just uploading vid on youtube to show you all that "working" rom, i know how installing roms but its dont work, i know how to wpie and when do it bus seorusliy it not work...
and to use triangle away my phone must working, and thats problem.. i will show you that on vid just wait
and yes ofcourse i can enter in download mode and in cwm, just i say its only one rom with can boot.. stock and other roms stuck on sign "samsung i9300" stock roms stops at samsung logo and one of cyanogenmod starts up almost normal (u see what is wrong in vid) and is error with com.android.phone
VID is avalibe in first post
try to redownload zip file and try again ...maybe it should work . Happens to me once the same error ,i just rebooted in recovery mode ,did a wipe dalvik cache/ cache a factory reset and all went fine .
also you can try this https://www.youtube.com/watch?v=1iCq7fSqIqk (read the comments also)
switelolo124 said:
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Click to expand...
Click to collapse
You can download this ROM. It is 4.3 for Poland (Plus)
Please read the guides on how to flash properly. If you flash the wrong way, then you can end in trouble.
did this Rom has kernel inside ?
and guys... i KNOW HOW INSTALLING ROM, i just write like that to make it shorter
@edit
not working i told u guys its not working only cm11 without wiping plus stock aroma rom kinda working...
did is some way to installing firmware with odin but emerygency mode ? i doing that in galaxy s2 mini but i know its diffrend samsung.. but maybe.. ?
Did u try flashing rom without sd card ??
Sent from my SM-N9005 using XDA Free mobile app
Related
Hey,
I wanted to update my Gingerbread MIUI and picked an ICS version cause I didn't look properly.
Now I'm stuck at the xiaomi logo and also can't get into recovery to do anything.
Is there a way to fix this?
I appreciate your help guys!
Damnation
No recovery (assuming you're not pressing the wrong key combo) = flash stock rom in Odin to get a 'clean slate'. Then you can re-root your phone & try Miui again if you're still game.
sounds like
it sounds like you never deleted all data, dalvek cache or reset phone before you installed new rom.
just a thought
its aslo usefull to install rom, when finished while in rec. mode find fix permissions, clickn run, reboot then.
THEN istall updated gapps recommended in rom thread (if rom doesn't have gapps (google apps) preinstalled, romthread will tell you)and repeat fix perm. clickn reboot. dont make the mistake of doing it All at once ive found this helps
damnation333 said:
Hey,
I wanted to update my Gingerbread MIUI and picked an ICS version cause I didn't look properly.
Now I'm stuck at the xiaomi logo and also can't get into recovery to do anything.
Is there a way to fix this?
I appreciate your help guys!
Damnation
Click to expand...
Click to collapse
Yeah, and don't forget to do a factory/data reset after u flashed any ROM, custom or stock. If you do that the phone wont get stuck on the boot screen(S logo). Happened to me xD
I'm new here and im only here because i destroyd my S3 software.
i was using cmd 10.1 on my rooted phone but i thought i would try to downgrade it to cmd 9.1
without further thinking (stupid me) i downloaded the 9.1 update from the setting - about phone - etc.
when i then restarted my phone was stuck at bootlogo screen. when i then tried restart to clockworkmod i came right to "dowload custom rom" screen.
i have tried to install a stock rom with odin without any luck and also, by using odin, installed a pit. file. when i now have installed a stock rom i get the normal stock rom boot loader screen but are stuck at that point.
i have also tried to install clockworkmod with odin. just came to the "download custom rom" screen.
Can anyone help me or is my phone totaly broken? :'(
Stupid Poll .
I'm new here and im only here because i destroyd my S3 software.
And you have not bothered to read the faqs and guides .
Two choices paid for repair or as above read the faqs and guides .
PIT probably broken phone .
jje
holern said:
I'm new here and im only here because i destroyd my S3 software.
i was using cmd 10.1 on my rooted phone but i thought i would try to downgrade it to cmd 9.1
without further thinking (stupid me) i downloaded the 9.1 update from the setting - about phone - etc.
when i then restarted my phone was stuck at bootlogo screen. when i then tried restart to clockworkmod i came right to "dowload custom rom" screen.
i have tried to install a stock rom with odin without any luck and also, by using odin, installed a pit. file. when i now have installed a stock rom i get the normal stock rom boot loader screen but are stuck at that point.
i have also tried to install clockworkmod with odin. just came to the "download custom rom" screen.
Can anyone help me or is my phone totaly broken? :'(
Click to expand...
Click to collapse
Just flash a stock rom and do a factory reset
Sent from my GT-I9300 using xda premium
After installing CyanogenMod 11 on my Galaxy S3, Play Store stopped working. I haven't found 4.4.2 Gapps so I flashed GApps for 4.3.
When it booted it said "Setup Wizard has stopped". Launcher hasn't worked but I could still run Settings. I downgraded to CyanogenMod 10.2 (And 4.3). Now I have a bootloop with no recovery and bootloader. What can I do now? Can I restore it like a normal hard brick?
Please, help!!!
alexajax said:
After installing CyanogenMod 11 on my Galaxy S3, Play Store stopped working. I haven't found 4.4.2 Gapps so I flashed GApps for 4.3.
When it booted it said "Setup Wizard has stopped". Launcher hasn't worked but I could still run Settings. I downgraded to CyanogenMod 10.2 (And 4.3). Now I have a bootloop with no recovery and bootloader. What can I do now? Can I restore it like a normal hard brick?
Please, help!!!
Click to expand...
Click to collapse
1- download latest cm11 + PAGapps ( http://forum.xda-developers.com/showthread.php?t=2397942) + In case u wanna use a custom kernel make sure that it supports latest cm11 with r3p2 Mali driver + make sure u have latest recovery installed.
2- go to recovery and make a full wipe 0R flash Mega wipe in case u don't know how to ( http://forum.xda-developers.com/showthread.php?t=1832326)
3- Install custom kernel ( only if u wanna use one if not skip this step)
4- Install cm11
5- Install PAGapps 4.4.2 (latest)
6- Reinstall custom kernel again (Skip this step if ur using the stock CM 11 kernel)
7- Reboot.
By the way ur just stuck in a Boot loop due to incompatibility issues not bricked.
Oh crap I didn't read the last two lines -.- It seems ur bricked.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Download mode yes .
No then its worth trying a usb recovery jig before paying for a repair .
hi all i m really looking for help as i am loosing my hope ,first my phone detail
GT-I9100,
2.3.5,
baseband-I9100XXKF1
kernal-2.6.35.7-I9100XXKI3-CL577579
gingerbread.jpkj2..
.now the problem is very wired,i have rooted my phone becoz i see superuser and i have CWM version 3.15 installed,have Rom manager installed but there is no way i can install JB or kitkat ..i tried almost all steps but the one place i always fail is when i try to install clockwork recovery for gt-i9100 via Odin my phone doesn't boot and shows the main screen and exclamation mark then i used a kernel flash as mention in one of the forum to reboot again..
I am amazed to see that when i go into the recovery mode i don't see all the option just 4 general option and that gives me an idea that i dont have CWM installed but then why in my icons i have CWM?? i am confused...i have tried so many times to flash it but but my phone gets soft-brick and again i flash kernel to boot into my device.i am really worried to do any more steps as i feel i will brick my phone now
..my only question is can i install JB,kitkat or any update on this device...if yes then can any one who got my issue can help me one first and last time to get it done...please help:crying:
hellow guys !
recently i flashed some roms on my GT-S6310....no problem whit them....everthing worked perfectly (just to compare them)
so.... i flashed a stock rom on my phone to apply a theme....everything went good....how i expected my custom recovery image was replaced whit the stock one ....... so far so good....but when i try to flash via Odin the same CWM it show me "pass" but when i boot into recovery it appear the stock one
in that way i tried a milion of methods to flash the custom one but they wasn't work
even the "root" didn't worked :crying:
now i'm stack into the stock rom , whitout any way to escape
please guys help me to understand why it happened , and how to resolve it
stefan254235435235411354 said:
hellow guys !
recently i flashed some roms on my GT-S6310....no problem whit them....everthing worked perfectly (just to compare them)
so.... i flashed a stock rom on my phone to apply a theme....everything went good....how i expected my custom recovery image was replaced whit the stock one ....... so far so good....but when i try to flash via Odin the same CWM it show me "pass" but when i boot into recovery it appear the stock one
in that way i tried a milion of methods to flash the custom one but they wasn't work
even the "root" didn't worked :crying:
now i'm stack into the stock rom , whitout any way to escape
please guys help me to understand why it happened , and how to resolve it
Click to expand...
Click to collapse
Don't let it auto reboot after the recovery flashes. Either uncheck auto reboot or just hit the combo for recovery when the phone reboots. Many newer Samsung phones have a script that reinstalls the original recovery if it realizes that you have changed it. You have to install another rom or root it and remove the script and reflash the recovery and it'll stick if you just want stock rooted.
es0tericcha0s said:
Don't let it auto reboot after the recovery flashes. Either uncheck auto reboot or just hit the combo for recovery when the phone reboots. Many newer Samsung phones have a script that reinstalls the original recovery if it realizes that you have changed it. You have to install another rom or root it and remove the script and reflash the recovery and it'll stick if you just want stock rooted.
Click to expand...
Click to collapse
didn't worked...... after i flash the recovery (i'm in download mode) i boot directly into recovery.... the same problem
try to instal the recovery via rom manager.....seems to work.....but when i want to boot from rom manager into recovery it show me an error ("an error occurred while attempting to run privileged commands !" )
what should i do now ?
http://galaxyyoungs6312.blogspot.com/2014/01/clockworkmod-recovery-for-galaxy-young.html
6310 + 6312 use the same recovery.
yeah....but i tried that rooting method and it didn't work....
maybe i can flash a new rom from ADB but i can't pass the signature verification
any ideas ?
Well I can tell from your pictures that you didn't follow the suggestion of trying SuperSU, but that might not help anyway. That Framaroot version is an older one. Get the updated version from here: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 and use SuperSU instead of Superuser. Sometimes you have to run it a couple times before it'll go through. Reboot in between tries. Here are better instructions for the rest of the process:
http://forum.xda-developers.com/showthread.php?t=2460029
man ...didn;t work... ... tried at least 5 times .....
or....i can flash a rom from ADB but i can't pass the signature verification....
a have an ideea ....maybe i can flash via odin a rom whit a custom recovery ...from there i can flash an old backup of mine .....it's good to proceed right that ?