Good Morning
When I want to connect my droid X phone to my laptop, the cable is usb on one end and micro usb on the other end. So can I use that on my Sony S also to connect to the laptop? or are there different wires inside the cable or something so that I cannot use it, different wattage or amperage or whatever??
As always I am technically challenged LOL
Sandy
The Sony Tablet S uses the standard Micro-USB cable so you'll be able to connect to your laptop with no problems.
It will work for both, given the chip( Mini USB) is the same for both. The cable just carries the current. It is the charger portion that puts out the specific voltages. You are good to go as long as the mini USB fits
Sent from my SGH-T989 using XDA App
rithsv said:
The Sony Tablet S uses the standard Micro-USB cable so you'll be able to connect to your laptop with no problems.
Click to expand...
Click to collapse
Really? This works?
Uh oh. I've tried hooking up my tablet to the PC with a standard micro usb cable. And also with the sony converter that makes it a normal sized USB port and a double ended USB cable. Both of these didn't do anything for me. I've just been transferring files to/from it with the sony converter and a jump drive.
Anyways, let me know if everyone else is normally hooking the tablet to a PC or if you guys are just assuming. Thanks
MarkB709 said:
Really? This works?
Uh oh. I've tried hooking up my tablet to the PC with a standard micro usb cable. And also with the sony converter that makes it a normal sized USB port and a double ended USB cable. Both of these didn't do anything for me. I've just been transferring files to/from it with the sony converter and a jump drive.
Anyways, let me know if everyone else is normally hooking the tablet to a PC or if you guys are just assuming. Thanks
Click to expand...
Click to collapse
You should only need the one cable.. The cable I use for my HTC Desire HD works on the tablet and the same with the cable for the Galaxy S II as they are the same kind of cable.
Just connect micro USB, from tablet to PC and it works
kadji9 said:
Just connect micro USB, from tablet to PC and it works
Click to expand...
Click to collapse
Same here. I plug it in with a cheap USB <-> Micro-USB cable and it recognises it instantly and I can copy stuff to and from without even having to mount the storage manually.
Weird!! I tried plugging it in with my normal phone's micro usb cable when I first bought it and nothing happened. I tried again last night and nothing happened.
I just read all your posts about how it will work and I tried again, and my computer recognized it this time.
**This post is brought to you by the power of believing, apparently**
lol
Related
Hi,
Do I have to use original USB cable to transfer data to/from my Hero? I tried my USB mini cable which I use with my digital camera and other devices, and Hero started to charge it's battery, but didn't display any notification about possible file transfers. Also dmesg on my Ubuntu doesn't show any connected USB device. However, it works with original HTC cable, but it's quiet short.
You need the original cable. Sorry :-(
No you don't. A normal USB to Mini USB cable works fine.
jamesking420 said:
No you don't. A normal USB to Mini USB cable works fine.
Click to expand...
Click to collapse
So, why mine doesn't work? As I said, the cable works fine with my camera and MP3 player.
all generic usb cables i have used so far (at least 6, maybe 10) have worked fine. charging, file transfer, adb worked.
hotvico said:
You need the original cable. Sorry :-(
Click to expand...
Click to collapse
u dont need the original!! every mini usb works fine
Ok, I'll try another ones.
xlxl said:
every mini usb works fine
Click to expand...
Click to collapse
Whilst you don't need to use the supplied USB cable, this part of your statement is *incorrect*. There have been many, many, examples here on these forums where people have had to switch to using a different cable in order to get a PC to recognize the Hero correctly.
My advice to anyone having such an issue is to try a variety of different cables, even if the cables you are using work with other devices.
Regards,
Dave
hey!
i got myself a used TG01 but it didnt came with a usb host cable, so i decided to use a gender changer and the data cable to connect the peripherals to my phone, but it did not work...it does not recognize anything, am i doing something wrong ? or cant it be connected with anything else then the usb host cable provided?
thanks!!
mordockcs said:
hey!
i got myself a used TG01 but it didnt came with a usb host cable, so i decided to use a gender changer and the data cable to connect the peripherals to my phone, but it did not work...it does not recognize anything, am i doing something wrong ? or cant it be connected with anything else then the usb host cable provided?
thanks!!
Click to expand...
Click to collapse
it's a generic micro USB cable, you can find it at NOkia or HTC store
thanks for the reply, i already made some research and found out that the host cable is in fact a special cable that has 2 wires grounded on the micro usb side.
i actually was able to make one, but it must have broke a soldering point and if i connect it, it drains my battery in 10 minutes...
after the failure i just brought one out of ebay.
regards!
BTW: i encountered and other problem...
i had 2 micro USB cables, and i destroyed 1 to make the host cable, they looked the same so i picked one at random, now the phone wont change with this cable with the ac adapter connected i have to connect it to the PC to that it can receive power.
I tested with an other cable and it worked...has anyone experienced this?
I made one using an old USB extension cable. It took about 10 mins. Short the green and white wires on the female side of the USB cable. Now will use any normal in-car charger.
mordockcs said:
thanks for the reply, i already made some research and found out that the host cable is in fact a special cable that has 2 wires grounded on the micro usb side.
i actually was able to make one, but it must have broke a soldering point and if i connect it, it drains my battery in 10 minutes...
after the failure i just brought one out of ebay.
regards!
BTW: i encountered and other problem...
i had 2 micro USB cables, and i destroyed 1 to make the host cable, they looked the same so i picked one at random, now the phone wont change with this cable with the ac adapter connected i have to connect it to the PC to that it can receive power.
I tested with an other cable and it worked...has anyone experienced this?
Click to expand...
Click to collapse
you have to have a short on the 2 data wires for it to charge.
My USB cable for my x10i seems to have developed a loose connection so now my pc wont recognise its been plugged in and the cable has to be jiggled about to get it to charge.
Anyone know the type of cable i need? or a cheap online place to get one?
All you need is a micro USB cable. You can find them pretty much in any phone or computer store. Or try Amazon.
It doesn't have to be branded. I bought an inexpensive generic one and it works just fine.
which EXACT type is it????
http://www.cablestogo.com/resources/usb.asp
Thanks!
Micro-USB B
rogem_kk said:
Micro-USB B
Click to expand...
Click to collapse
Thanks! I will go to micro center and see what I can find.
I picked up this blackberry set.
It appears to charge OK from PC to X10, but it is not connecting to allow update.
Trying update service now to see if it will work.
its jank to me a pos
Hi everyone,
and thanks in advance for any help / advice that you may have for me.
I'll start off with my question, before I unload all of my information. I simply would like to know exactly what type of USB Connection the Sony Tablet has, and therefore, what specific USB Cable I need to buy in order to connect it to my PC running Vista.
I bought a Sony Tablet and have been surprised the lack of information in regards to the USB connectivity of the device. Specifically, the exact 'cable type' required to connect the device to a PC. Everywhere I have read so far, it simply says USB Micro, or USB 2.0 micro. But when I try use the micro USB cable that I currently use with my Xperia Play phone (which works fine for PC transfer with the phone) it's doesn't work at all with the Sony Tablet. It doesn't even register on the PC when I plug the cable into the tablet. Just nothing.
Since then, I have read a lot about USB, and found that there are different types, like 'Mini USB' versus 'Micro USB'. Apparently there is also Micro USB 'A' and Micro USB 'B'. And finally, apparently there is 4 pin micro usb and 5 pin micro usb type.
hope this all makes sense, many thanks guys.
Austab.
This tablet uses micro USB, I'm pretty sure the cable for your Xperia should work fine with the tablet. Perhaps you plugged it in upside down?
Thanks for the reply, I agree with your thought train. If it works with the Xperia, then surely it should work with tablet. I'll try it again after work today, and confirm. Is it actually possible to plug the cable in the wrong way around?
I'll kick myself if I did! Thanks again, cheers.
Austab.
It cannot be plugged in upside down, unless you use extreme force and break it.
***
But yeah, this cable *should work, if it works with your Xperia Play. In principle there is only one kind of micro-USB cable (well, actually it could have either regular type A *OR micro type A connector at one end, but let's keep it simple. Mini-USB is a different kind and A and B are just connector types.
See this picture with different USB connectors:
http://en.wikipedia.org/wiki/File:Types-usb_new.svg
Your cable should have a regular USB A connector (the one on the top left) at one end and micro-USB B connector at the other end (the one on the bottom right).
Yeah, it should work; I'm using the same USB cable that I use with my Xperia Arc.
For what it's worth, I've been having issues too. Mostly windows fails to find the drivers and install them. I've talked to multiple Sony reps and have tried multiple computers but haven't had any luck. Maybe it's a bad cable but I have had Windows detect the device...just unable to install the plug-n-play drivers.
Systems I've tried it on:
Custom built - Windows 7 with Service Pack 1
Dell - Windows XP Service Pack 3
Sony Vaio Laptop - Windows XP Service Pack 3
I had the same problem on both of tablet P and tablet S. I can tell you, its more about luck than the wrong cable type! At the end, it just works after retrying a few plugs and unplugs.
Hope they can get a fix for this soon.
Hey again guys, I've now tried the cable again with my Sony Tablet, and I'm definitely plugging it in correctly. There's no response whatsoever on the tablet or the PC once I've plugged the cable in.
When using the same cable on my Xperia play, the phone will instantly start charging once I plug the cable in to the PC. However, the PC doesn't actually recognize the phone as a device (i.e. it doesn't show up in windows explorer, or launch the Ericsson Phone Software, as it once did). It charges the phone, but doesn't talk to it, if that makes sense.
So it would seem that some Micro USB cables are good for charging only, but not for data transfer / PC recognition.
I'll buy a different cable tomorrow so will let you know if it works then.
Thanks again for all the replies guys I appreciate it.
cheers again,
Austab
Looks like the cable is faulty then and you have to try another one.
I bet one of data wires is broken, or a data contact inside connector is broken (worn down), because when you connect your Xperia Play it should also be recognized as a device.
Then again, maybe there is something wrong with your computer.
Can you try the same cable on another computer, and see if the device is recognized, before you buy a new cable. Or let them check the cable at the store to see if it really is faulty.
My understanding is you need an OTG USB cable, (On The Go) - this is what you need to connect USB keys and other hard-drives and so therefore I would think external PCs too.
I bought a nokia one for around 5 pounds from amazon, do a search for OTG USB cables,
thanks
Pratish
He wants to connect it to a computer, not connect external devices to it.
So he needs a regular micro-USB cable.
the cable is USB Host finde with this name
People, wtf are you talking?!
He *does not* need USB host (OTG) cable. That's for connecting USB devices, like keyboard, mouse, USB-storage etc., to your tablet.
He wants to connect his tablet to a computer. For that he needs a regular type A USB to type B micro-USB cable.
Hi,
Would seem like op had a charging cable, not data one. As stated, he need a regular data cable with appropriate connectors. OTG has nothing to do with it.
Sent from my HTC Desire using XDA App
Hi Crazzzik,
so you're saying that there are micro usb cables for charging only, and then there are micro usb cables for data + charging etc? That would explain things perfectly for me, as my cable seems to work for charging devices, but not communicating with a PC (i.e. data transfer).
I'm getting a new cable today - sorted!
Many thanks everyone for your help & advice
Austab
Yes when I got the cable for my sony tablet s, I saw several usb cables that would fit the tablet, but on the package it said specifically "for charging only, not meant for data transfer", so they do make the cabkes just for charging, as a PC tech, I was a little embarrassed that I just found this out this weekend.
Thanks
I also got a microUSB-cable adapter, it works fine with usb driver / joypad and keyboard
but not sure if it's capable for connecting with PC or even for charging
hello all,
I recently bought the usb cable for the tablet they sell at the sony store. The micro usb to female normal usb ( I think you know what im talking about). It is sony tablet specific. The micro usb end of the cable is square instead of tappered at one side. it worked fantastic for plugging in and usb deviced to the tablet, but when I tried to plug it into my galaxy s, it wouldn't fit. just thought those thinking of buying one would appreciate the heads up so its not a shock if they try to use it on any other devices. Im sure you can find that same cable at any well stocked computer shop.
i borrowed a htc wildfire s cable, this works and installs drivers.
Today, a friend asked if I had an extra laptop. He needed one for his 10 year old son.
While rummaging through my closet (you know, the one with all the old computers, shotguns, and half empty Jack Daniels bottles) when I found one of these.
Two Pics … http://db.tt/GY4wfof6 and http://db.tt/rzkodoMi
Now, I have no idea as to how, where or when I got this. I had to search the net to even know what it was.
Ebay link … http://www.ebay.com/itm/230328510631?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2648
Continuing my search of the closet I also found a 2.5 inch 160 gig IDE hard drive. Assembled the two and I now have a portable battery powered drive that works great with my Flyer.
That looks kinda old school. =)
So you connect to the flyer via bluetooth or microUSB?
It connects with microUSB.
Now that I’ve had a chance to use it a while I’ve found I can set its switch to PC or DC.
When set to PC I just plug it in to my Flyer and can copy files both ways.
When set to DC it will function as a standalone unit (because it has its own battery power). I can plug thumb drives and USB sdcard adaptors into it to move files both ways.
It will even plug into my camera and copy the pictures.
Kind of handy as the Flyer doesn’t supply power at its microUSB port to spin a hard drive.
It’s not what I call well built but seems to work.
At least it does the job! I didn't know we could use OTG harddrive for the flyer...
That's very cool. Vastly increases the number of movies I could take with me on a long trip!
ARRR
Ok so spent about £40 on one of these and it doesn't work with my Flyer(32GB WiFi 3G). Flyer is not rooted and running the latest official version of HC. I have tried both DC and PC but device still does not detect the OTG drive. My samsung mobile finds the device fine.
Are you using a standard micro usb cable ??
simtech1976 said:
Ok so spent about £40 on one of these and it doesn't work with my Flyer(32GB WiFi 3G). Flyer is not rooted and running the latest official version of HC. I have tried both DC and PC but device still does not detect the OTG drive. My samsung mobile finds the device fine.
Are you using a standard micro usb cable ??
Click to expand...
Click to collapse
Yes using a standard micro usb cable
Try this ... Shut down your Flyer (make sure Fast Boot is unchecked in settings) then turn on your drive in DC mode and restart your Flyer.
Your Flyer should find it then and will work from then on.
Using your file explorer of choice you should see a new folder called USB
Hi, tried this but still no go. Ran a USB host and USB OGB diganostics app which still fail to detect the device. The drive works with my camera/Samsung phone and brothers PSP. May have to fork out for WIFI drive.
Still no go with the OTG device. Tried with a friends Flyer and same results. I am going to try this device, is fairly cheap.
http://www.ebay.co.uk/itm/USB-2-5-For-OTG-LCD-Partner-Storage-Backup-HDD-/260990399369?pt=UK_Computing_HardDrives_RL&hash=item3cc43d7389
simtech1976 said:
Hi, tried this but still no go. Ran a USB host and USB OGB diganostics app which still fail to detect the device. The drive works with my camera/Samsung phone and brothers PSP. May have to fork out for WIFI drive.
Click to expand...
Click to collapse
Strange … My Flyer is the 16 Gig Best Buy wifi model and is rooted I wonder if that makes a difference
I use an OTG USB cable on my US BB Wifi Flyer , the standard usb cable doesn't work for me.
DigitalMD said:
I use an OTG USB cable on my US BB Wifi Flyer , the standard usb cable doesn't work for me.
Click to expand...
Click to collapse
I have an OTG cable from my samsung but this did not work. what OTG cable are you using? I gather you are connecting the USB device into the OTG cable via a powered hub?
Got it working but it's a hackjob, was going to root but having to downgrade then upgrade again was a pain and was not guaranteed to work. Tried running the OTG cable into a powered hub but for what ever reason would always come up USB device not recognised when plugging in any memory device. Tried 3 USB hubs with the same result. Ended up cutting up an OTG cable and a few other USB cables so I could provide power to the device and then power to the tablet as well. For whatever reason i need to provide power to he memory stick before plugging into tablet. I have tested 4 different memory pens and 1 external harddrive and they all work.
I just bought a generic OTG cable, its about 6 inches long. I think it may have come from HP. I have used both a powered hub and a y-usb hard drive cable and both worked for me.
You have to have power on the device before you plug it onto the FLyer so that on connect the Flyer software knows what type of device it is and can load the driver. Otherwise the Flyer will label it unknown and disable the device.
Managed to get USB on the go to work on my Jetstream. See the following post. as the flyer very similar, should work for flyer too.
http://forum.xda-developers.com/showthread.php?p=24814701
Sent from my HTC PG09410 using XDA