I used the instructions on the development page.. Root, wipe everything then flash cm7, then cm7 gapps, then wipe everything and flash ics passion 13.. But I have no gapps installed when I booted. Is there a gapps link I can flash or do I need to go back to stock and redo it all from scratch? Thx in advance guys!
Just flash the gapps that you have.
s15274n said:
Just flash the gapps that you have.
Click to expand...
Click to collapse
I've tried that, then for some reason I get a boot loop.. Can I flash cm9 gapps? And if so do you have a link?
Related
Hi,
i tried to flash hybrom v11 (comming from cm7.2) i followed all instructions but it doewnt boot.
I am getting the android and then a blackscreen.
I also tried to install a different hybrom before, but no chance Does anybody has a hint for me?
Thanks in advance,
ede
Did you wipe cache, user data and dalvik cache?
If you are coming from CM i suggest you to flash a stock rom with stock kernel and boot the phone. after successfully doing it, then you can try to flash hybrom v11
besides, it is good to ask this from boof (the creator) in the hybrom thread
Hi, I have a st15i 4.0.2.A.0.42 with stock firmware.
My system is rooted, bootloader unlock.
How do I install this ROM?
I must first upgrade to build 062?
If so, how do I build on the root 062?
androidsl said:
Did you wipe cache, user data and dalvik cache?
If you are coming from CM i suggest you to flash a stock rom with stock kernel and boot the phone. after successfully doing it, then you can try to flash hybrom v11
besides, it is good to ask this from boof (the creator) in the hybrom thread
Click to expand...
Click to collapse
I cant post in the dev area as i am neww here
I wiped all as given in the installation information, also flashed stock (2.3.4) and the flashing the cm kernel and then the image...
regards,
ede
Flash the stock ROM .62
Reboot.
Shutdown.
Flash KRsh kernel v3
Enter Into cwm
Flash HYBROM V11
WIPE EVERYTHING
Reboot.
Wait first installation takes time.
Reboot again.
Enjoy
IMRAND said:
Flash the stock ROM .62
Reboot.
Shutdown.
Flash KRsh kernel v3
Enter Into cwm
Flash HYBROM V11
WIPE EVERYTHING
Reboot.
Wait first installation takes time.
Reboot again.
Enjoy
Click to expand...
Click to collapse
Hi,
thanks for that, it worked. Is this the kernel you suggest for that rom also after installation? Or would you flash another?
Regards,
Ede
the title pretty much states it, i found a similar thread but didnt quite get me a for sure answer, so more in depth. i have CM10.1 nightly and there is a new nighly that i would like to flash, will i need to wipe then flash the rom and gapps all over again? or i can i just flash over the old nightly and it should run fine without flashing the gapps aswell.
sakumaxp said:
the title pretty much states it, i found a similar thread but didnt quite get me a for sure answer, so more in depth. i have CM10.1 nightly and there is a new nighly that i would like to flash, will i need to wipe then flash the rom and gapps all over again? or i can i just flash over the old nightly and it should run fine without flashing the gapps aswell.
Click to expand...
Click to collapse
To flash a nightly or any other Rom update all you need to do is wipe Cache partition and Dalvik cache, then flash the update in recovery. You do not have to flash Gapps. All your apps will remain unchanged.
rdw55a said:
To flash a nightly or any other Rom update all you need to do is wipe Cache partition and Dalvik cache, then flash the update in recovery. You do not have to flash Gapps. All your apps will remain unchanged.
Click to expand...
Click to collapse
You don't even need to wipe dalvik or cache, I can't remember the last time I did when flagging cm nightlies and I've been flashing them for years now
Sent from my HTC One using Tapatalk 4 Beta
What about if i have cm 10.1 stable, but want to flash cm 10.2 nightly? Do i need to do a full wipe and flash the new rom, gapps, and lean kernel?
WastedPotential said:
What about if i have cm 10.1 stable, but want to flash cm 10.2 nightly? Do i need to do a full wipe and flash the new rom, gapps, and lean kernel?
Click to expand...
Click to collapse
You should always wipe when making a major os upgrade.
Sent from my HTC One using Tapatalk 4
Hi guys.
First sorry for my english.
I need your help solving the problem.
I must say that my knowledge is very basic.
Yesterday I downloaded the latest nightly build from cm site (cm-10.2-20130827-nightly-i9100)
After the download complete i tried to boot into recovery to wipe data/factory reset and cache and start flashing the rom But with no Success.
The device won't boot into recovery.
I read somewhere a post saying you should choose app and adb option under developer options\root access but still no success after changing this option.
One more question please
I downloaded the supersu app from the play store and each time it remind me the need to update the su binary each time i choose continue it faild to update.
find the kernel fixed by codeworkx in the cm thread or flash dorimanx kernel with odin ( there is one in .tar in the download list).
k2vmars said:
find the kernel fid by codeworkx in the cm thread or flash dorimanx kernel with odin ( there is one in .tar in the download list).
Click to expand...
Click to collapse
Can you post please a direct link and a guide ?
I forgot to mention that now I'm running cm-10.2-20130824 after flashing previous cm 10.2 builds with no problem.
Can u explain me what can go wrong ?
Link;OTA Problems
Rasra said:
Can you post please a direct link and a guide ?
I forgot to mention that now I'm running cm-10.2-20130824 after flashing previous cm 10.2 builds with no problem.
Can u explain me what can go wrong ?
Click to expand...
Click to collapse
Had the same problem yesterday: Auto-Update seems to be broken, if you apply an update downloaded OTA (even when coming from an older 10.2 Nightly), you can't get into recovery anymore:
Download the newest .tar (9.34) here:
http://dorimanx.shine.sk/
and flash it using ODIN
(insert .tar at PDA)
H3llwar said:
Had the same problem yesterday: Auto-Update seems to be broken, if you apply an update downloaded OTA (even when coming from an older 10.2 Nightly), you can't get into recovery anymore:
Download the newest .tar (9.34) here:
and flash it using ODIN
(insert .tar at PDA)
Click to expand...
Click to collapse
hi H3llwar.
1. Which update are you talking about? I did not do any update.
2. Is required to perform additional actions before flashing the kernel?
3. which odin ver should i use? 3.XX ? 1.85 ?
4. after flashing the kernel should i flash a custom rom again ?
thanks
Rasra said:
hi H3llwar.
1. Which update are you talking about? I did not do any update.
2. Is required to perform additional actions before flashing the kernel?
3. which odin ver should i use? 3.XX ? 1.85 ?
4. after flashing the kernel should i flash a custom rom again ?
thanks
Click to expand...
Click to collapse
1. There's an OTA update function which I used. Obviously, you didn't, it seems to be the nightly thats broken.
2. No, just flash it via ODIN
3. 3.XX worked just fine for me (changed to SlimBean yesterday as CM 10.2 seems too buggy for the moment)
4. You can flash just Dorimanx 9.34.tar, CM 10.2 & recovery should be acessible afterwards
Keep in mind that CM 10.2 and most other ROMs replace the kernel you currently have, if you want to flash another Custom ROM, flash 1. Rom.zip, 2. Gapps.zip & 3. Kernel.zip
H3llwar said:
1. There's an OTA update function which I used. Obviously, you didn't, it seems to be the nightly thats broken.
2. No, just flash it via ODIN
3. 3.XX worked just fine for me (changed to SlimBean yesterday as CM 10.2 seems too buggy for the moment)
4. You can flash just Dorimanx 9.34.tar, CM 10.2 & recovery should be acessible afterwards
Keep in mind that CM 10.2 and most other ROMs replace the kernel you currently have, if you want to flash another Custom ROM, flash 1. Rom.zip, 2. Gapps.zip & 3. Kernel.zip
Click to expand...
Click to collapse
Thank you very much for your help !
After flashing dorimanx kernel via odin was able to boot into recovery mode and flash the rom.
And yes the rom is very buggy maybe i will flash other rom meanwhile.
How is the slimbean rom ?
Rasra said:
Thank you very much for your help !
After flashing dorimanx kernel via odin was able to boot into recovery mode and flash the rom.
And yes the rom is very buggy maybe i will flash other rom meanwhile.
How is the slimbean rom ?
Click to expand...
Click to collapse
It's great!!!
Stable, fast, good battery life with shipped kernel, and just 81MB. I don't miss any feature that CM or AOKP have and it doesn't get bricked when installing Head Soccer like XenonHD does :victory:
Give it a try!
[Solved]
H3llwar said:
It's great!!!
Stable, fast, good battery life with shipped kernel, and just 81MB. I don't miss any feature that CM or AOKP have and it doesn't get bricked when installing Head Soccer like XenonHD does :victory:
Give it a try!
[Solved]
Click to expand...
Click to collapse
hi mate.
i really want to try the slimbean rom but for doing that i need your help (you r my private teacher )
The latest slimbean version appears on the official site is JB 4.22 built 8.
What actions it takes when you downgrade from cm 4.3 to slimbean 4.2.2 etc ?
Rasra said:
hi mate.
i really want to try the slimbean rom but for doing that i need your help (you r my private teacher )
The latest slimbean version appears on the official site is JB 4.22 built 8.
What actions it takes when you downgrade from cm 4.3 to slimbean 4.2.2 etc ?
Click to expand...
Click to collapse
It isn't different from any other ROM change because SlimBean ships with its own kernel and dorimanx supports both 4.3 and 4.2 ROMs:
In Recovery Mode:
1. Wipe data
2. Wipe cache
3. Flash Rom.zip
(Optional: 4. Flash Dorimanx 9.39.zip)
I was wondering if someone could clarify if dirty flashing a cm13 upgrade (nightly) you can also flash new gapps, or if based on the recommendation below that can only be done on first cm flash from stock.
Anyone ever done this or it just is not useful /should not /cannot be done?
"Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow ROM. Do not boot with an older gapps or without one and then try to install it later."
Thanks!
Yes you can flash new gapps after dirty flashing CM13. But I don't know why anyone would do that since CM13 has gapps persistence between dirty flash.
Pixel launcher as system app got me wondering about this!
Thanks!
xskull03 said:
Yes you can flash new gapps after dirty flashing CM13. But I don't know why anyone would do that since CM13 has gapps persistence between dirty flash.
Click to expand...
Click to collapse
AGREE !~:good:
do whatever , but remember,
DO NOT TURN ON THAT "UPDATE CYANOGEN RECOVERY" OPTION, which erases twrp ,
and too many ppl complain about stuck in cm recovery after ota,, remember that..
Thanks for that!
Don't even know where that is.
Will look for it!
jvc73 said:
Thanks for that!
Don't even know where that is.
Will look for it!
Click to expand...
Click to collapse
It's in Developer Options.
Sent from my Galaxy Tab 3 using XDA Labs
Hi i have a problem, when i install custom rom for example. rr 5.8.3 on 7.1.2 when i boot phone and i have screen welcome and i start configuration and this configuration crashed, i install with wipe, and i install new nitrogenos and i have the same situation. When i install rom on 7.1.1 all its ok, what can i do to fix it? Please help me its screen from phone http://imgur.com/a/uUPls
You might be using an outdated GApps package, as it is known to cause this issue. Try with the latest opengapps.
jayaram95 said:
You might be using an outdated GApps package, as it is known to cause this issue. Try with the latest opengapps.
Click to expand...
Click to collapse
Yea i install old version gapps and i dont have any problems on 7.1.1, hmm then i must install new gapps if i check i will write
;P
You can flash newer gapps from here.
OR
You can follow this guide on older gapps.
Very thanks, i have one question, i must install firmware to install rom for example rr or nitrogen? i never install and everything is right
Okay i install beansgapps and its works Thanks for help
badamczuk1 said:
Very thanks, i have one question, i must install firmware to install rom for example rr or nitrogen? i never install and everything is right
Click to expand...
Click to collapse
no need to flash it if there's nothing wrong
if there's something wrong, try to flash latest MIUI Beta firmware, you can find it in ROM section, and no need to flash it everytime you flash a new ROM, just flash it once and you're good to go