Hi,
i tried to flash hybrom v11 (comming from cm7.2) i followed all instructions but it doewnt boot.
I am getting the android and then a blackscreen.
I also tried to install a different hybrom before, but no chance Does anybody has a hint for me?
Thanks in advance,
ede
Did you wipe cache, user data and dalvik cache?
If you are coming from CM i suggest you to flash a stock rom with stock kernel and boot the phone. after successfully doing it, then you can try to flash hybrom v11
besides, it is good to ask this from boof (the creator) in the hybrom thread
Hi, I have a st15i 4.0.2.A.0.42 with stock firmware.
My system is rooted, bootloader unlock.
How do I install this ROM?
I must first upgrade to build 062?
If so, how do I build on the root 062?
androidsl said:
Did you wipe cache, user data and dalvik cache?
If you are coming from CM i suggest you to flash a stock rom with stock kernel and boot the phone. after successfully doing it, then you can try to flash hybrom v11
besides, it is good to ask this from boof (the creator) in the hybrom thread
Click to expand...
Click to collapse
I cant post in the dev area as i am neww here
I wiped all as given in the installation information, also flashed stock (2.3.4) and the flashing the cm kernel and then the image...
regards,
ede
Flash the stock ROM .62
Reboot.
Shutdown.
Flash KRsh kernel v3
Enter Into cwm
Flash HYBROM V11
WIPE EVERYTHING
Reboot.
Wait first installation takes time.
Reboot again.
Enjoy
IMRAND said:
Flash the stock ROM .62
Reboot.
Shutdown.
Flash KRsh kernel v3
Enter Into cwm
Flash HYBROM V11
WIPE EVERYTHING
Reboot.
Wait first installation takes time.
Reboot again.
Enjoy
Click to expand...
Click to collapse
Hi,
thanks for that, it worked. Is this the kernel you suggest for that rom also after installation? Or would you flash another?
Regards,
Ede
Related
Hi Everybody. As the title say, I am facing issues with the touch screen when i install Any CM ROM(FXP-Official)/AOSP. At the first boot I Can not unlock my phone or skip the "Tutorial". After Reboot the phone, the problem is still there
*I Flashed the BB recommend for each ROM (.72)
*I Installed the Respective Kernel via Fastboot:
- fastboot flash boot boot.img
Then
- fastboot boot boot.img
*I did a Full Wipe (Cache, Data, Dalvik)
*Format - System
*I flashed ROM
* And....Nothing
Any Solution? Anyone?
Thanks
EDIT. Every SE based ROMs (MIUI etc.) work without that BUG
EDIT. 03/03/13 AROMA Installer also does not work (Only with Vol and Menu buttons)
Jonfensu said:
Hi Everybody. As the title say, I am facing issues with the touch screen when i install CM9 FXP113/115. At the first boot I Can not unlock my phone or skip the "Tutorial"
I Installed the Kernel via Fastboot with Flash and Boot commands
I did a Full Wipe (Cache, Data, Dalvik)
Any Solution? Anyone?
Thanks
Click to expand...
Click to collapse
Flash right kernel inside rom.zip folder.
Sent from my MT15i using Tapatalk 2 Beta-6
taaviu said:
Flash right kernel inside rom.zip folder.
Sent from my MT15i using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
I know, I did that when i was installing FXP113 or 115 (With respective kernels) i mean the problem is with FXP Kernel and ROM .... Is there any patch or something?
UPDATE: Please Someone Help me... I tried the ICS Official Leak from here ,http://forum.xda-developers.com/showthread.php?t=1594651 and following the Instructions, i STILL get the same issue...: The Touch Screen Does not Work (Hardware buttons works) Anyone?
PS. With AOSP,Mooded and other ICS ROMs with Nightelf,Pwn etc Kernels i don't have that issue
I have the same problem with Cm7, CM9 and MIUI and its kernel in the zip file, but I can not find solutions. My touch screen works only with stock rom or with official Ics kernel beta and Ics rom official and hybrid rom. Solutions?
Sent from my MT15i using XDA
sorry for my bad English
Sent from my MT15i using XDA
ash6088 said:
I have the same problem with Cm7, CM9 and MIUI and its kernel in the zip file, but I can not find solutions. My touch screen works only with stock rom or with official Ics kernel beta and Ics rom official and hybrid rom. Solutions?
Sent from my MT15i using XDA
Click to expand...
Click to collapse
Sure you did flash custom kernel with "fastboot flash boot boot.img"?
Sent from my MT15i using Tapatalk 2 Beta-6
HiTaaviu,I flashed the costum kernels included in the zip file CM9, CM7, and I also tried Pwn and NightElf kernel, but the touch screen does not work with MIUI cm7 and CM9, touchscreen only works with the stock rom and MooDeD ICS ROM, JJ's HYBRID ROM, AOSP 4.0.3 ICS, ICS SE Beta official with the official kernel ics of sony.
then the problem is not flash the kernel, because ics official kernel works perfectly and then flash the kernel run correctly. But why with the other kernel touch screen wrong?
I do not know how to do it, I can not find any solution!
ash6088 said:
HiTaaviu,I flashed the costum kernels included in the zip file CM9, CM7, and I also tried Pwn and NightElf kernel, but the touch screen does not work with MIUI cm7 and CM9, touchscreen only works with the stock rom and MooDeD ICS ROM, JJ's HYBRID ROM, AOSP 4.0.3 ICS, ICS SE Beta official with the official kernel ics of sony.
then the problem is not flash the kernel, because ics official kernel works perfectly and then flash the kernel run correctly. But why with the other kernel touch screen wrong?
I do not know how to do it, I can not find any solution!
Click to expand...
Click to collapse
Pleas write here steps "how do you install MIUI or cm7-9 rom"
Thanx
Etc..
1.downloaded rom xxx.zip
2. kernel xxx.img
3. wipe?
How installed kernel/rom.
Ok, this is the procedure I follow:
1 -Flash .42 with Flashtool
2-Root
3-Unlock bootloader with fastboot (fastboot.exe-i 0x0fce oem unlock 0xMykey)
4-Install cwm recovery
5-Iput zip file downloaded to sd (ex. update-cm-7.1.0-XperiaNeo-MT15i-signed)
4-I put the kernel included in the zip into the fastboot folder and flash (fastboot flash boot boot.img)
6-I go into recovery and wipe data / factory reset, wipe cache and wipe Dalvik cache
7-Flash zip rom and GAPPS
8-Reboot
9-Phonework but touch screen does not work
I tried with pwn kernel and other but it is the same thing!
The situation that presents itself is equal to this video:
Boot ZTE Blade / Oranage San Francisco (B10) with custom rom with working touch screen(Search in youtube)
I also tried to use the technique in the video but without battery Xperia neo will not turn on.
I do not understand where I'm wrong!
First of all flash .62 ftf by flashtool...then flash the respective custom kernel for the rom...wipe everything and also format everything in cwm ...all custom kernels are pre rooted and cwm recovery ready...now flash the rom and see if it works.
Sent from my MT11i using XDA
Cm7 cm9 n miui need .64 baseband not .42 so flash the
Baseband of .64 or rather fresh install .62 firmware
Sent from my MT11i using XDA
I have flashed .64 firmware official, then i have flashed kernel included in the zip file of CM7.1.0.1, then i have format and wipe everything and flashed rom, but Touch doesn't work!!
Same thing with CM9!
I do not know what to invent to make it work!
Then some experienced dev is needed here...they can give some advice.
Sent from my MT11i using XDA
Some developer, PLEASE.... HELP US!!
ash6088 said:
I have flashed .64 firmware official, then i have flashed kernel included in the zip file of CM7.1.0.1, then i have format and wipe everything and flashed rom, but Touch doesn't work!!
Same thing with CM9!
I do not know what to invent to make it work!
Click to expand...
Click to collapse
Is zdunex miui ics working?
It uses stock kernel.
Sent from my MT15i using Tapatalk 2
If I use the stock kernel the touchscreen works perfect, but only with the stock kernel
The problem is still here... I tried Every ROM based on CM9 (since FXP129 to CM9 RC2 Official) or AOSP (Polish Blood 4.04) and don't work... Others ROM based on SE (MIUI etc.) Work flawless... WE NEED SOME DEVS HERE, Please...
please, no one can solve this problem ???
Lemme try.
Flash the latest Stock firmware. Boot it up, and go thru the whole setup process. Stock FTF usually got no probs when it comes to hardware.
Run the phone in Stock for awhile (1-2mins), then shut it off. Go into fastboot mode (press and hold "Menu" button while plugging into PC) and flash the kernel from the LATEST version of the ROM you want to use (FXP146 for CM9.1/CM10, FXP110 or something for CM7.2, MIUI2/MIUI4/MIUI4.1). It is usually in the zip itself or the dev would have recommended a kernel. If you don't know how to flash the kernel, PM me.
Boot up phone into recovery, flash new ROM, flash gapps, reboot phone.
BOOM all should be ok
Hello,
I am kinda new to installing custom ROMs and all, but after going through a lot of guides here, i finally managed to unlock BL, root my phone and install night-elf kernel and the Xperia Pureness ROM. Everything works like a charm, the only problem is the wi-fi. Cant connect to my modem at all. Heres whats i did:
1. Rooted phone a few months back(locked BL then).
2. Unlocked BL now.
3. Did a nandroid backup
4. Installed Night-Elf's kernel the one recommended in the Xperia Pureness thread
5. Installed Xperial Pureness Rom and NXT files as per the instructions
6. Reboot.
Now having problems with wi-fi. Erm so is this a bug with the ROM or did i do something wrong along the way? Thank you for the awesome ROM fyi
Did you wipe all the stuff in CWM?
Sent from my Xperia Neo V using Tapatalk 2
yes, i did. Followed as per the instructions and wiped/formatted in the order mentioned.
So guys, should i just reinstall to fix the wi-fi problem or is there any solution for it??
I think yes!
You should flash a clean 4.0.4 firmware using flashtool..
Install the appropriate kernel for it!
Boot into CWM.. Factory reset, wipe cache partition, wipe dalvik cache..
And then install the ROM.
Sent from my Xperia Neo V using Tapatalk 2
Dont, i have to root to install CWM??
So, i should install a clean 4.0.4 firmware, stock kernel-->root it-->install cwm->install night-elf kernel-->install Xperia pureness. That's about it??
cool.guy1990 said:
Dont, i have to root to install CWM??
So, i should install a clean 4.0.4 firmware, stock kernel-->root it-->install cwm->install night-elf kernel-->install Xperia pureness. That's about it??
Click to expand...
Click to collapse
exactly... root,then install cwm.. and the rest of the steps are as u said.. dont forget the wipe..
Oh ok.. Will give it a try in a couple of hours..
Sent from my MT11i using xda app-developers app
No problem for me.
Hey, what build are you using?
I have no problems with build 8 and 7 now.
Did you Factory Reset, wipe data, wipe cache and wipe dalvik cache in CWM?
If not, try reinstalling it. I had this problem too.
I am using the latest build, build 8.
Took me little over an hour, but i finally did it!!
Installed clean 4.0.4 firmware, clean stock kernel --> rooted --> installed cwm --> installed night-elf kernel --> factory reset and all wiping --> then installed the ROM.
Now my wifi works perfectly. Bit annoying that i have to install all of my apps again but kinda fun too
Thanks everyone for helping me out and special thanks to ThilinaC for the awesome ROM, especially loved the walkman app.
I flashed this rom several times but without success. I followed the thread guide: stock ics firmware, then advance ics kernel, flashed SSped firmware zip from cwm, then the SSped Kernel... I also tried with wipe dalvink chace and factory reset before and after flash.
The phone starts normally but is unusable. I have many errors saying: unfortunately, "app.name" has stopped working,,,,
Thanks for the help!
GImiki
I have been having this too , try the kaSSpeed rom v10 , i found it more stable
Thanks for the info. It is based on ICS? It is better than cyano 9 and stock rom?
what i prefer is....
i had the same problem...but with the XHS v3 full addon rom......just go to recovery....delete cache ....wipe dalvik ....and do a factory reset..after this flash the doom kernel v4a...it is very stable...let me now if it works.....perhaps ...try to use another rom....if that one works...try to flash to ur favorite one again!!!
sorry for my bad english
aloush5592 said:
i had the same problem...but with the XHS v3 full addon rom......just go to recovery....delete cache ....wipe dalvik ....and do a factory reset..after this flash the doom kernel v4a...it is very stable...let me now if it works.....perhaps ...try to use another rom....if that one works...try to flash to ur favorite one again!!!
sorry for my bad english
Click to expand...
Click to collapse
Now i am on xpera sspeed 10.1 with last sspeed kernel (5.1). It is very stable...
Hi,
Pac-man Rom WiFi don't work. I flashed Lupus8 kernel, wifi doesn't work. Then I flashed kernel from zip package ROM still nothing.
I tested pac_haida-22.2.0-rc1.zip (Release) and pac_haida-nightly-20130622.zip.
I doing wipe data/factory reset, flash Rom, after that wipe cache and Dalvik. It's no my first rom I know how do it.
-----------------------------------
Sorry for my english
tgrobi said:
Hi,
Pac-man Rom WiFi don't work. I flashed Lupus8 kernel, wifi doesn't work. Then I flashed kernel from zip package ROM still nothing.
I tested pac_haida-22.2.0-rc1.zip (Release) and pac_haida-nightly-20130622.zip.
I doing wipe data/factory reset, flash Rom, after that wipe cache and Dalvik. It's no my first rom I know how do it.
Click to expand...
Click to collapse
if the rom based of 4.2.2 with lupus you won't get wifi, bt for latest builds.... try kernel inside the rom install the rom using that one only reboot once if you got wifi problem, the problem still exits check installation steps in OP :good:
onemore thing ask these questions in related thread don't create threads in hurry
deccen90 said:
if the rom based of 4.2.2 with lupus you won't get wifi, bt for latest builds.... try kernel inside the rom install the rom using that one only reboot once if you got wifi problem, the problem still exits check installation steps in OP :good:
onemore thing ask these questions in related thread don't create threads in hurry
Click to expand...
Click to collapse
You have right. First kernel from zip package then flash ROM. Wifi works. Thanks.
Hello All,
can some one point me to .587 boot.img to download for xperia mini pro?
I need this because, i am trying to flash Xtream Bean ROM V 3.0 and this need this boot image and i dont have this. v2.0 flashed successfully though.
http://forum.xda-developers.com/showthread.php?t=1920187
this link has for SK15i. i tried searching the other threads with no luck.
I am new to this flashing so sorry if i asked in wrong thread or something.
Thanks in advance
iamkiu said:
Hello All,
can some one point me to .587 boot.img to download for xperia mini pro?
I need this because, i am trying to flash Xtream Bean ROM V 3.0 and this need this boot image and i dont have this. v2.0 flashed successfully though.
http://forum.xda-developers.com/showthread.php?t=1920187
this link has for SK15i. i tried searching the other threads with no luck.
I am new to this flashing so sorry if i asked in wrong thread or something.
Thanks in advance
Click to expand...
Click to collapse
the link you posted has .587 firmware for mini pro.... download it....
you have to flash it first by using flash mode and then you will find boot.img in the zip file of Xtream Bean ROM V 3.0....
extract boot.img from zip and flash it in fastboot mode.... now go to CWM recovery and follow the instructions
iamkiu said:
Hello All,
can some one point me to .587 boot.img to download for xperia mini pro?
I need this because, i am trying to flash Xtream Bean ROM V 3.0 and this need this boot image and i dont have this. v2.0 flashed successfully though.
Click to expand...
Click to collapse
I guess it's not really necessary to flash the .587 kernel first... just go ahead flashing the boot.img from inside the zip and boot in cwm recovery and flash the rom
If you really want the kernel, take it from here
thanks for ur reply
mihahn said:
I guess it's not really necessary to flash the .587 kernel first... just go ahead flashing the boot.img from inside the zip and boot in cwm recovery and flash the rom
If you really want the kernel, take it from here
Click to expand...
Click to collapse
but from installation from http://forum.xda-developers.com/showthread.php?t=2350427
Download Xtream Bean Rom V3.0 and the Fix.zip
Copy them to your SD Card
Flash the .587 Kernel First !
Click to expand...
Click to collapse
says to flast this kernal first.
I tried with out doing it but i landed into some bugs for which flashing this kernal is must?
Please suggest if I am wrong
Thanks a lot
iamkiu said:
says to flast this kernal first.
I tried with out doing it but i landed into some bugs for which flashing this kernal is must?
Please suggest if I am wrong
Thanks a lot
Click to expand...
Click to collapse
Normally there should be no problem just because you didn't flash the .587 kernel first, but you can try flashing the stock .587 kernel I posted earlier and then the boot.img you take from the rom.zip
Did you wipe before installing v3? Sometimes there are problems because you didn't wipe, but I don't know about the rom...
mihahn said:
Normally there should be no problem just because you didn't flash the .587 kernel first, but you can try flashing the stock .587 kernel I posted earlier and then the boot.img you take from the rom.zip
Did you wipe before installing v3? Sometimes there are problems because you didn't wipe, but I don't know about the rom...
Click to expand...
Click to collapse
Thanks a lot for ur kernal. it worked fine aftet flasing the ftf.
and btw, i wiped cache and dalvik too
Regards,
iamkiu