Related
I've never used wireless tether on my phone, but recently tried to. I'm running the Lightning Bolt 2.7 rom and I'm using Wireless Tether for Root Users. I hit "press to start tethering" and everything seems fine. I'm granted SU permission and it displays "press to stop tethering" which leads me to believe that the program is working correctly. I have 3G connection but I'm getting 0.0kb down and up and I'm unable to discover my Eris with any other device (my wife's Eris, PC, or laptop). Am I doing something wrong?
Install another wifi tethering program? Make sure you're using wifi tethering and not usb tethering...
Hungry Man said:
Install another wifi tethering program? Make sure you're using wifi tethering and not usb tethering...
Click to expand...
Click to collapse
I think I've tried every free wifi tether app in exsistence. I've heard tetherWifi works but I don't want to pay $9 to test it...wish they'd let you try b4 you buy.
Stupid question, but do you have wifi turned on?
If so, there is an option in the settings of wireless tether app that's called enable access-control. If this is checked then you have to grant priviledges to the devices that you wish to connect to your phone. You will have to slide the notifications window down and then select the notification about some device that is trying to connect to your phones wifi. After you select that notification you must grant the priviledge before it will work.
Good Luck!!
geske001 said:
Stupid question, but do you have wifi turned on?
If so, there is an option in the settings of wireless tether app that's called enable access-control. If this is checked then you have to grant priviledges to the devices that you wish to connect to your phone. You will have to slide the notifications window down and then select the notification about some device that is trying to connect to your phones wifi. After you select that notification you must grant the priviledge before it will work.
Good Luck!!
Click to expand...
Click to collapse
I had my wifi turned off but I've tried turning it on and off. I enabled access-control, disabled it, turned bluetooth PAN tether on and off, and I've changed the settings to each of the different LAN network settings. Each time I return to the main page I'm seeing 0.0kB down and up. When I scan for wifi connections with my wife's phone, it never sees my Eris. I've even tried manually adding the wifi network on her phone by entering "AndroidTether" manually as the SSID which is what my phone says the SSID is. It adds it to her wifi networks but says that it is "Not in range, remembered".
Question - When you turn on Wireless Tether, before you connect any devices to it, does your phone display any kB going down or up? Or do you have to actually connect to a device to start pushing a signal?
You might need to start over. Do not mess with anything other than changing your SSID and enabling Access control. Do not use bluetooth for confusion reasons. When you connect with your wireless laptop watch for the access request, slide your notifications and then accept your device. You should be ok. Do not try to complicate things. Just KISS!!
PM me if you have any other questions!
That's my problem. I can't get other devices to even attempt to connect to my phone. The only notification I ever see is "tethering is currently running". I get superuser permission whenever I turn on tethering or change any settings that require it to restart tethering. But I never get any kB down or up and no other device ever recognizes the wifi connection.
Whenever I get an access control notification, it DOES NOT pop up. It is displayed subtly at the top of the phone and I have to slide my finger from the very top of the screen down to the bottom, and then the notification menu fully comes up. I then click the access control notification and check the device that is trying to access wifi through my phone. You have to pay close attention.
You could try to click on the menu button by your home button and select access control, and see if anything tries to attach. You will need to check the box for the device and then accept.
Good Luck!
geske001 said:
Whenever I get an access control notification, it DOES NOT pop up. It is displayed subtly at the top of the phone and I have to slide my finger from the very top of the screen down to the bottom, and then the notification menu fully comes up. I then click the access control notification and check the device that is trying to access wifi through my phone. You have to pay close attention.
You could try to click on the menu button by your home button and select access control, and see if anything tries to attach. You will need to check the box for the device and then accept.
Good Luck!
Click to expand...
Click to collapse
I understand that I have to view my notifications to see the notification. But there is never one there. No device sees a wifi signal because the phone isn't pushing one. It's my understanding that the app should be pushing a wifi signal that other devices can see and try to connect to. When I'm on my laptop or my wife's phone and I scan for a wifi network I DO NOT see my phone and therefore the device does not attempt to connect to my phone (and there is not a notification if I slide my finger down at the top of my phone to allow a connection).
The question I have is: when you begin tethering (BEFORE ANY DEVICE HAS CONNECTED OR ATTEMPTED TO) do you have kb's going down or up? Someone answering this simple question would help me tremendously!
Thanks!
Sent from my FroyoEris using XDA App
To answer your question, no. if nothing is connected to the tether then the connection has no need to upload or download info.
MJL99 said:
To answer your question, no. if nothing is connected to the tether then the connection has no need to upload or download info.
Click to expand...
Click to collapse
Ok, thanx. That means my probem lies in the connection, not the actual tethering.
Sent from my FroyoEris using XDA App
joshw0000 said:
Ok, thanx. That means my probem lies in the connection, not the actual tethering.
Sent from my FroyoEris using XDA App
Click to expand...
Click to collapse
What version are you running? I'm not running a froyo rom so I havent been up to date on what works and what doesnt, but have you looked thru all the froyo rom threads to see if anyone else has had a tether problem? On aloysius, I have version 1.6 and it works fine, get info transfer up and down after I connect with my laptop. If you have access control enabled, you will need to authorize your device that is connected, if you can find it in wireless networks.
Is wireless tether bundled with the rom? You said you have tried all versions that you could find but I still have a feeling its the version of wireless tether you have, but it could also be that all versions you found are only compatible with 2.1.
Heres all I could find:
Wireless Tether
I'm on KaosFroyo v24. So I tried opening wireless tether and running it. I started it and did a wifi scan on my wife's phone. Still nothing. I got on the laptop and ran about a half dozen scans and it finally saw and connected to my phone, at which point data was streaming up and down. I had just assumed before since no data was streaming and I couldn't connect initially that something was wrong.
I still can't connect with my wife's phone (which was what I used most for testing) but I got it working.
Thanks to everyone for your help!!!
Sent from my FroyoEris using XDA App
I bought my first smartphone ever last month to give you an idea how new I am. My last phone was a Touch that I had set up to allow tethering... but I had to upgrade my phone. I need my tethering back, and I prefer not going through a program like pda-net.
So, I read that if I root the phone, I'd have tethering back. I used Revolutionary. I backed up my phone. I installed clockwork and superuser. I think I did everything I'm supposed to do. However, when I plug the phone in (I prefer USB tethering) and click the "Internet Connection Mode", I still get the message I need to subscribe for $20 a month, and I don't get a connection. Do I need to do something else to enable wired tethering? Do I have to install a 3rd party program as well? Or is it that I haven't installed a custom ROM/Kernel/Radio/Whatever would be the right thing?
The phone is a Thunderbolt. HTC Sense 2.1, Software #2.11.605.5, Android version 2.3.4.
I really don't have much of an idea what I'm talking about, so if anyone has any fairly easy answers, it would be greatly appreciated. Thanks for any help.
Find my WiFi tether thread and follow instructions
Sent from my ADR6400L using XDA App
Do what lantern says. Just rooting does not unlock the built in internet sharing apps. You need to get the apps that do what you want now. I.e. wireless tether, you might like wired but wireless is very nice.
Sent from the nearest cellular tower.
Grnlantern79,
Well, I've tried following your instructions on the other thread. I downloaded the .apk you had listed.
That took me an hour to figure out how to install... didn't know I needed to install another program to install something from a memory card.
As for these instructions:
"Mine did not work until I changed the device profile to Thunderbolt in settings.
Then I changed a few other settings such as
Force WiFi driver reloading (check) *has worked for some*
Routing fix (check) *most important one*
Disable wake-lock (unchecked) -> *this is why you lose connection after your screen turns off*"
I can't for the life of me find where any of these are. I've spent a good amount of time trying to find them, and just can't seem to find a settings section.
Then I tried Autotethering and WiFi Tether from the Market. It doesn't matter which I use, when I hit "Internet Connection Mode" the Verizon $20 to use message pops up. I tried on two computers, and both will see something there, but not connect to the internet. I tried connecting without selecting that, but it still didn't work (had it on "charge only").
I'm very frustrated... I've spent hours working on this and don't feel like I'm making any progress. I appreciate you attempting to help via that other thread, but I'm lost. If you have any way of giving me a more detailed explanation of how to get this to work, I would greatly appreciate it.
If I just install some new ROM and not work off the rooted stock one I have, would they come with the tethering block from Verizon disabled?
Thanks for any advice.
Telaeus
When you open WiFi tether press menu the soft key at bottom of your phone, the settings will pop up.
Device profile = thunderbolt
Routing fix = check box
Enable access control
Now I can tell you are not tech savy so this is where my help stops. If you can't find the settings in a program after an hour, you should think about return your smart phone for a feature phone.
Sent from my ADR6400L using XDA App
Well, thanks for trying to help then Grnlantern79. I had misunderstood where to look for the settings. Figured it was settings on the phone itself I was changing to bypass the Verizon Internet Connection thing.
I changed all the settings in WiFi tether. Still no luck. The computer recognizes the network... I set it to Public. It's listed as HTC Remote NDIS Based Device. However, there is no Internet or Network access. I'm not putting it to "internet connection mode" since the Verizon popup has never gone away... leaving it on Charge only.
If anyone else is willing to try and assist me, I would appreciate it. I fully admit to not being smartphone savvy. However, I'm not incapable as Lantern implies... I've built my own computers since 1993, and can diagnose and do pretty much anything hardware related. Unfortunately, smartphones are different, and I'm still getting up to speed on all the terminology and uses of them.
So, thanks Lantern... but is anyone else able to figure out why this isn't working?
Thanks for any help.
Enable access control
Check
WiFi driver reload
Routing fix
Uncheck
Disable wake lock
Setup-method
Apple computer
Wext
Any other
softtap
Set computer profile to home network.
When u connect to ur phone it wireless not usb, ur phone will have a notification asking if its ok to connect, hit enable. Done.
Sent from my ADR6400L using XDA App
I have rooted 2.3.6 ROM based on AT&T stock rom. It has 'attwifi' access point which phone tries to connect whenever I walk next to any Starbucks. The problem is that most AT&T access points want me to either login or, at least, click on some stupid check-box in browser. So unless I open browser and do it, I lose my Internet connectivity.
I would like to remove or disable this attwifi access point, but in settings it does not give me any option to do so. I even went as far as trying to remove it from /data/wifi config files but it just gets resurrected.
Does anyone know how to remove or disable this access point?
In wi fi settings there is an option to automatically connect to att wifi network. Uncheck that
Sent from my SAMSUNG-SGH-I777 using XDA App
Also in your wifi settings find the attwifi network, long press, and select forget network. That worked for me, but I'm not on the stock ROM anymore.
Sent from my Galaxy S II (i777)
Pretty stupid of me! The option to disable auto connect was right in front of me all the time.
Thanks.
It's still would be interesting to know if attwifi can be deleted or changed to regular (forgetable) network. How did they do it, I wonder?
Sent from my Transformer TF101 using xda premium
you should be able to remove it from the listed access points (ie tell the phone to "forget" it). However I haven't been on the stock rom in a few months now, so i'm not sure how you'd do it. pretty sure if you just go into wifi settings and do a long hold on the access point name it'll give the option to forget it.
I will probably disable mine as well. I noticed it come on in the McDonald's drive through, then nothing was loading.
I am running Nilsp business ics 3.x, s-on as of now, I have been using the Wifi tether app that Nilsp added to the rom with the profile set to Galaxy Nexus (CDMA/LTE) and the routing fix checked, and it works for the most part. What happens is my laptop will be connected to the wifi from the phone but it can't access the internet because it says "limited access" with a little exclamation sign next to it. It is not that the phone is not connected to the internet though because my buddy's iPad will be connected to the internet at the same time and it will be working fine for him. Could be a problem with the phone, could be a problem with my computer, I don't know. My computer will connect to other wifi signals just fine. Very confused on this matter. Anyone got any answers?
Jacrushar said:
I am running Nilsp business ics 3.x, s-on as of now, I have been using the Wifi tether app that Nilsp added to the rom with the profile set to Galaxy Nexus (CDMA/LTE) and the routing fix checked, and it works for the most part. What happens is my laptop will be connected to the wifi from the phone but it can't access the internet because it says "limited access" with a little exclamation sign next to it. It is not that the phone is not connected to the internet though because my buddy's iPad will be connected to the internet at the same time and it will be working fine for him. Could be a problem with the phone, could be a problem with my computer, I don't know. My computer will connect to other wifi signals just fine. Very confused on this matter. Anyone got any answers?
Click to expand...
Click to collapse
probably the laptop:
make sure you don't have any static-ip settings on your wifi adapter. Let the phone get an IP dynamically. Also don't set any specific dns entries either. I had difficulty from both angles if I didn't just let the wifi-tether app dictate the network settings to the laptop.
Also, do you have any custom firewalls on your laptop? The phone defaults to the 192.168.2.0/ network, so it's not the same as your home router, which is probably 192.168.1.0/
My laptop does that as well but the limited access for about a minute or so but then works fine. Im not sure what causes it
Boot to safe mode with networking (f8 on boot up) and see if it connects.
If it works in safemode with networking then you have a firewall issue.
I can assist further if it is the case
Ok so yeah I am haiving the same problem as hardfallen87. I'm sorry but I don't think I completely understand everything you guys have said to try and help. I sort of understand the IP address stuff but I can't find any settings like that anywhere on the computer. And no I do not have any custom firewall installed.
Still haven't really fixed this problem. I'm still constantly getting limited access on my PC from my phone's WiFi tethering app. I am now running Nils Business ICS Sense 4 version 2.6 and am S-off but it seems no matter what ROM I use it doesn't make a difference. Any help is appreciated...
Dalamar1320 said:
Boot to safe mode with networking (f8 on boot up) and see if it connects.
If it works in safemode with networking then you have a firewall issue.
I can assist further if it is the case
Click to expand...
Click to collapse
Seems to work in safe mode ok.
Hi,
My apologies if this is the incorrect section. I know the Virgin Mobile SGS2 is NOT the I9100 model, however the correct phone was not listed on this site (nearest is the T-Mobile model, but the options differ on their phone).
I'm experiencing an issue with trying to enable the wireless hotspot option for my phone. In every instance I have tried, I have received errors that ad-hoc failed to start and related problems. Let me make it clear that this version of the samsung galaxy DOES NOT have the option to turn on wireless tethering in the native settings menu (it's simply not there). My carrier most likely hid the option because it is an extra $15 a month to use the feature. I can, however, attempt to start the hotspot service with a third party app, but it runs for no more than 3 seconds and I get error 67:" Unable to connect to data network, turning off Hotspot..."
My phone is rooted and I have full access to edit system files (I did so to remove the ear-piercing camera shutter noise). I am using the stock rom and do not intend to flash a different rom to this phone. To lessen redundant suggestions that have been said hundreds of times and have failed to fix my issue, here is everything I have done:
Attempted to use FoxFi. All this app does is start the native hotspot capability on your phone, so I got the same error 67. No network connection. The network only appears for a split second when enabling the native hotspot setting, but since the phone turns it off, I can't connect to it.
Attempted to use Barnacle. I receive the error "Could not set ad-hoc mode of wlan0: Operation not supported on transport endpoint."
Attempted to use Wifi Tether for Rooted Users (for some reason this app is listed as "Not Compatible" for my phone in Google Play). Again, I receive an error that setting ad-hoc failed. All other services start successfully though, but the network does not appear for my PC to connect to.
Checked to make sure my 3G/4G is actually on and functioning.
Despite all this, I CAN utilize the USB tether feature just fine in PdaNet. It's the wireless hotspot that is eluding me. I know that flashing a different rom can get me around this issue, but I really would prefer to resolve this problem without doing that if it's possible. One thread I read said something about editing a .db file, but it was for an HTC phone and I'm a little wary to try it on my phone. I'm sorry for coming off rather cross, but I'm just a bit frustrated as every solution I find never works. It seems like this would be a simple thing to do. Is there a system file I can edit that will allow my phone to enable its native hotspot capabilities? Or something that will resolve the ad-hoc issue? Or am I blindly over-looking something obvious? If nothing will work except for flashing, then hey, at least I tried. It's not going to kill me if I can't get the wireless tethering to work, but it was one of the reasons I wanted to root my phone.
Any help would be greatly appreciated. Thanks in advance!
I randomly figured out the problem myself. Downloaded something on a whim and it actually worked. Let me go through each step so anyone else who has this same problem can try this out.
The majority of what I did can be followed here:
*Can't post the link. Thank you, forum restrictions... It's from a website called "highonandroid.com" so google that with the appropriate keywords (wifi tether, android, etc.).
But in case the link goes dead or something like that, here is a step-by-step reiteration:
1. Download Trev-E's mod for the Wifi Tether for Root Users app. I have the exact version I used attached to this post.
2. Install it, and immediately go to settings and make the following adjustments:
- Change device profile to "Generic ICS/JB (wlan0)."
- Change setup-method to "Netd-Ndc (master)."
- Tick the option "Send Netd Max Client Cmd."
- Tick "Wifi driver reload." The second one did not work for me, but try it if the first reload does nothing.
- Although the original tutorial says to tick "MSS clamping," this option is not available on my phone. But this did not stop the app from working.
3. Exit settings and hit the wifi icon. Fingers crossed it works for you!
After doing that, the app showed no errors in the log, the network name appeared on my computer, and I was able to connect effortlessly. Most importantly, the internet worked!
Also, enabling/disabling the tether DID NOT break my phone's wifi or 3G service. Everything ran fine when I stopped using the app and I didn't need to restart my phone. Putting this out there because I know some phones will trip out when enabling this feature. Good luck! And big thanks to xda's Trev-E for the app.
Thank you! That was driving me nuts trying to tether my GS2 to my tablet. I dont have the clamping option either but its working perfectly when nothing else has.
Nice instructions. I rooted my phone today (root virgin), downloaded the trev-e you have linked and got it to work. (Virgin Mobile Samsung Galaxy SII 4G)
I then tried to use encryption and the phone was just not having it, the internet connection wouldn't work anymore (laptop was connected but said there was no internet access). Frooze up the phone, had to reboot, frooze again, reboot, turn the feature off, freeze, reboot, pull battery etc etc. Finally have it working again with encryption off.
Pretty happy to have tethering working, but wish I could encrypt it haha.
Do I have the wrong TrevE using the stock ROM? (using the TrevE linked in this thread).
Now to learn what else to do in the wonderful world of being rooted...
*** EDIT- Looks like installing busybox fixed the issue!!
Thanks!
Awesome work, follow the instructions if you have virgin mobile it will work perfectly