Related
Rooted my moms eris and want to update it to the latest ota update not worried about root allthough a rooted oced ota would be nice is there a rom out there like this??
Kinda need it to be stable since its my moms phone so i figure just going to the latest ota would be the best bet.
FYI
i tried to just update via the phone but kept getting settings force close errors...
if you are rooted any rom here is 2.1 or higher, just download a rom and your set, dont worry about ota...
fyi plainjane 2.1 is proably your best bet if your wanting to keep that 2.1 stock feel,http://forum.xda-developers.com/showthread.php?t=685581
To get to the OTA
Flash the latest PB00IMG.zip leaked version 3 through the bootloader, let the phone boot up as normal sign in to google whatever. When your done you will get the OTA and it will run successfully, I just did it today because I had to unroot and I'm actually leaving now to bring my phone back to Verizon for Trackball problems, again..... You can then reroot if you want and you will be on the new latest radio etc...
T2Noob released a Stock rom with Root and the ability to Overclock with the Newest OTA about a month back, check it out
http://forum.xda-developers.com/showthread.php?t=718092
I wild even try the cyborg evolution rom since its based off the latest 2.1 ruu.
Just take a look at the ROMs that are available and see what they are bad on.
Sent from my FroyoEris using XDA App
There is lots of concern about kernels and flashing them with various main versions. There are 3 basic main versions floating around:
Shipped Rezound - Main Version = 1.02.605.6
OTA Rezound - Main Version = 2.01.605.11
Leaked RUU for Android 4.0.3 - Main Version = 3.10.605.7
I am not going to mess with the leaked RUU for 4.0.3 but I can help with the other two. So, all of the following can be flashed in recovery and will install the library then reboot to bootloader to install the boot.img.
This will at least help you install a complete kernel for whatever situation you are in to cure things like WiFi broken.
Choose the one that best fits your situation, copy it to your SD Card, reboot to recovery and choose the Install Zip option. When it reboots to bootloader press power to start and then follow the instructions.
Currently running a Gingerbread ROM before installing the OTA:
Main Version = 1.02.605.6
Currently running a ICS ROM before installing the OTA:
Main Version = 1.02.605.6
Currently running a Gingerbread ROM after installing the OTA:
Main Version = 2.01.605.11
Currently running a ICS ROM after installing the OTA:
Main Version = 2.01.605.11
NOTE: You must be HTC UnLocked
If you are running the stock OTA stick with that kernel
By the way,
The GB kernel is the unlocked kernel for ADB when phone is active.
The ICS kernel is the one for ICS 4.0.1
thanks for writing this up Nils, I think it will save alot of problems and questions arising from flashing different roms !
thanks man!
are these stock kernels??
andybones said:
thanks man!
are these stock kernels??
Click to expand...
Click to collapse
GB is unlocked but other than that they are stock
Wow, you just helped soooo many people. :thumbup:
Good work! :beer:
What if I have
Kernel version: 3.0.13-gaf15497
Build number: 3.10.605.7
I want to get back to GB so I can unroot, relock, and get the OTA's new radio?
BBEgo said:
What if I have
Kernel version: 3.0.13-gaf15497
Build number: 3.10.605.7
I want to get back to GB so I can unroot, relock, and get the OTA's new radio?
Click to expand...
Click to collapse
I assume your at the 3.x main version then. I can get you to the stock kernel but can't change the main version with this approach. You could try the gb kernel from the released version and see if you get the mainver failure. If you do you can use the manual approach to get to mainver back to 1.02.605.6
I'm currently on rooted stock shipped Rezound, no OTA. I'm having trouble flashing back to CleanICS, ineffibilis ICS and ineffibilis Gb roms. I was previously on CleanICS. Then decided i wanted to go back to a Gb ROM. So what I did was flash a GB boot.img then I tried to flash ineffibilis Gb, but then the installation gets aborted in recovey. I was able to restore my stock rooted GB ROM though.
I tried to flash your kernel for "stock Gb Rezound, before OTA", but I'm also getting a Mainver failure.
What do I need to do to Be able to flash ineffibilis GB ROM? I'm currently on Gb stock no OTA. Shouldn't I be able to flash other Gb roms without worrying about mainver?
Will the "curently running ICS before OTA" also install the new firmware?
Sent from my HTC Rezound
Will the "curently running ICS before OTA" also install the new firmware?
Sent from my HTC Rezound
Click to expand...
Click to collapse
No, just the kernel
Finally got my head around this a couple of days ago, and thought someone should do exactly this. This is what makes you, you. Thank you Nile for being the kind of developer every phone needs.
Sent from my ADR6425LVW using Tapatalk
NilsP said:
Currently running a Gingerbread ROM after installing the OTA:
Main Version = 2.01.605.11
Currently running a ICS ROM after installing the OTA:
Main Version = 2.01.605.11
NOTE: You must be HTC UnLocked
If you are running the stock OTA stick with that kernel
Click to expand...
Click to collapse
In my case, I was on stock with OTA 2.01.605.11, and am installing Senseless 2.1 ICS. By your terminology, would I go with "running an ICS ROM after installing OTA", or stick to the stock kernel per the final bold statement?
spitzaf said:
In my case, I was on stock with OTA 2.01.605.11, and am installing Senseless 2.1 ICS. By your terminology, would I go with "running an ICS ROM after installing OTA", or stick to the stock kernel per the final bold statement?
Click to expand...
Click to collapse
If your going to the ICS ROM you need to flash the ICS kernel.
The last statement simply means if you are running the OTA don't bother with any other kernels.
Gotcha. Thanks Nils
So to go from your ICS back to a stock rooted nandroid restore what would be needed? The main version thing is confusing.
Sent from my ADR6425LVW
silverxbv2 said:
So to go from your ICS back to a stock rooted nandroid restore what would be needed? The main version thing is confusing.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
To go back to stock from my ICS ROM as long as you have not installed the OTA just requires running the stock RUU. You should not have to relock or anything since you still have the stock radio and hboot.
Now if you installed the OTA that is another story and there is a whole thread about that.
Part of my reason for starting this thread was to help others with main version problems.
The second reason was to help myself and other developers determine when we could safely cut our ROM's over to the OTA main version even if we did not use the new OTA kernel.
The downloads for these kernels, even after just 1 day, clearly indicates that most people have either accepted the OTA or installed the OTA ROM on their own. In other words, most of the downloads are for the versions that are based on the OTA main version to be installed on custom ROM's that use the old main version kernels.
I will watch the downloads for a few more days then decide what to do with my ROMs
NilsP said:
To go back to stock from my ICS ROM as long as you have not installed the OTA just requires running the stock RUU. You should not have to relock or anything since you still have the stock radio and hboot.
Now if you installed the OTA that is another story and there is a whole thread about that.
Click to expand...
Click to collapse
No. I didn't run the ota. Just need to get back to the stock gb Rom I made a backup of right after unlocking and rooting for a minute.
Sent from my ADR6425LVW
silverxbv2 said:
No. I didn't run the ota. Just need to get back to the stock gb Rom I made a backup of right after unlocking and rooting for a minute.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
Do the nand restore and flash the GB kernel with old main version.
Nils,
Just wanted to clarify one thing. I relocked, flashed original ruu, accepted ota, unlocked again and rooted. still using this rom which is essentially bone stock rooted. If I flash CR based off latest ota and later decided to restore nandroid of the bone stock, do I flash this kernel as well?
Currently running a Gingerbread ROM after installing the OTA:
Main Version = 2.01.605.11
my apologies for the question but I wondered in the case you are restoring a nandroid, do you need to also flash the kernel before restoring the nandroid. Hope I made myself clear. lol.
Firstly.. I'll admit that I didn't read as throughly as I probably should have.. I have rooted several phones with the first being the original Motorola Droid and then a couple others.. All fairly tricky but for the most part no big deal... Anyway, I had no idea what S-ON or S-OFF meant nor was it very easy to find information such as this explained in detail..
Anyway, here is where I'm at..
1. Running S-ON, ICS w/ Slim 1.6
2. Phone has a tendency to reboot when it feels like it.. hasn't been too bad but seems to happen more when it's on 4G
3. Phone will NOT allow me to mount the internal storage nor the sd card when I plug into a computer.. like I mean it's not even an option, all I get are charge and internet tethering options..
4. the BIGGEST issue.. I can not tether whatsoever.. I've tried several apps such as Barnacle & PDAnet but none of which work.. I'm sorry I'm just used to the days of my incredible where it was very easy to tether and install ROM's all day long so I guess I was spoiled..
Any help would be appreciated.. the more I read though the more that S-OFF will offer and am I correct to have read that if I do the S-OFF I can turn my phone back to a "locked" status in the boot loader and in turn can also put back to completely stock??
Thanks!
You need to flash the old firmware patch. Should be able to find it in one of the rom threads
Sent from my ADR6425LVW using Tapatalk 2
pwned3 said:
You need to flash the old firmware patch. Should be able to find it in one of the rom threads
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
So after checking into some things I tried going a different route..
I downloaded Nils' Business ICS 4.0.3 Sense 3.6 (ICS Latest) (Aroma Installer).. followed the instructions.. installed with S-ON etc.. everything seemed fine.. NOW it won't stop rebooting after I configured Gmail & my work E-mail.. I can't boot into the bootloader menu unless I remove the SD card because it tries to flash the PH98IMG.zip as soon as it loads..
SO what to do next?? HBOOT I have the following information
UNLOCKED
VIGOR PVT SHIP S-ON SL
HBOOT-2.11.0000
Radio-0.95.00.1118r/0.95.0.1223r
OpenDSP-v10.6.0.7611.00.0919
eMMC-boot
Oct 6 2011, 15:43.22
HELP please!!
.make sure you install the kernel and the gb firmware patch...these 2 things missing will cause bootloops .
If you have issues ask in Nils thread and I am sure he will help you out. I have been s off and on ics firmware for awhile prior to the aroma install method. Otherwise I could help you out more
Edit: you will want to select the first 3 boxes on the aroma install screen...Rom...kernel...gb firmware patch
Not sure how the installer works after that...but that's a start.
Edit2: you are currently on gb firmware, in the future if you run a gb Rom you will need to flash the gb kernel for the Rom. Any ics based rims will require the ics kernel AND the firmware patch. Without the firmware patch your sd card won't show up properly. The wrong kernel will end up in boot loops. Hope this helps explain things a bit.
Sent from my ADR6425LVW using xda app-developers app
ericsignals said:
.make sure you install the kernel and the gb firmware patch...these 2 things missing will cause bootloops .
If you have issues ask in Nils thread and I am sure he will help you out. I have been s off and on ics firmware for awhile prior to the aroma install method. Otherwise I could help you out more
Edit: you will want to select the first 3 boxes on the aroma install screen...Rom...kernel...gb firmware patch
Not sure how the installer works after that...but that's a start.
Edit2: you are currently on gb firmware, in the future if you run a gb Rom you will need to flash the gb kernel for the Rom. Any ics based rims will require the ics kernel AND the firmware patch. Without the firmware patch your sd card won't show up properly. The wrong kernel will end up in boot loops. Hope this helps explain things a bit.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Thank you very much for the help... I really thought I was on ICS firmware.. I know this sounds stupid but isn't Android version 4.0.3 ICS??
OH WAIT it just hit me.. So my ROM is 4.0.3 but the kernel is still GB.. I gotcha.. so of course my next question is.. can I upgrade to ICS firmware without S-OFF or is that a requirement???
I think what I'll end up doing is just flashing GB ROM but curious what would be needed to get to ICS firmware and can I get back again?
You can upgrade to ics firmware (via ics ruu). However with s on, you can only run the ruu you are currently on and/or newer versions/leaks. With s off you can run any ruu you like.
Basically you never ran an ics ruu, so your firmware is gingerbread. You can run either gb or ics. With a gingerbread Rom, you would flash Rom and kernel. With ics Roms, you'll need to flash Rom, kernel, and firmware patch.
If you decide to upgrade and run a ics ruu it will upgrade your hboot, radios, and change the mount point for the sd card. The mount point change is the reason for the firmware patch. After running an ics ruu you will have ics firmware. Running a ics Rom, you'll flash Rom and kernel. If you change mind and want to go to a gb Rom, you'll need Rom, kernel, and firmware patch.
So depending on which version or way you go depends on the method of flashing a Rom. Firmware is independent of roms, and the only easy way to change firmware is via a RUU.
Supposedly the ota is coming soon, supposedly the latest leak is the ota, supposedly the s off exploit will not be able to be patched.
I decided to s off...there's many threads with lots of info...so if you decide to go that route take time, read, and read some more. It's not too hard just take your time and don't get frustrated.
Once s off, most roms flash the kernels automatically, saving you a step. You can also run any ruu you want. Ruu is like a factory image that wipes the phone and upgrades radio, etc....basically it will be like you first got the phone and turned it on.
Everyone has different experiences with radios, some are betterfor some, others worse. Overall the new ics firmware seems to be better on battery and network speed for me at least.
There's many ways to proceed....however most roms that are being worked are ics based...and will be more so when the official ics ota hits.
Sent from my ADR6425LVW using xda app-developers app
Sure enough!! I went with a GB ROM CleanROM GBE 1.7.5 and it is working perfectly.. I'll decide if I want to move forward with anything else.. I really liked the way the ICS ROMs ran so I man end up moving to that firmware in the future but thank you very much with the explanations that REALLY helped a lot!!
Have a great 4th!!
mmmmpsi said:
Sure enough!! I went with a GB ROM CleanROM GBE 1.7.5 and it is working perfectly.. I'll decide if I want to move forward with anything else.. I really liked the way the ICS ROMs ran so I man end up moving to that firmware in the future but thank you very much with the explanations that REALLY helped a lot!!
Have a great 4th!!
Click to expand...
Click to collapse
Anytime...best of luck and have a happy 4th yourself
Sent from my ADR6425LVW using xda app-developers app
mmmmpsi said:
Sure enough!! I went with a GB ROM CleanROM GBE 1.7.5 and it is working perfectly.. I'll decide if I want to move forward with anything else.. I really liked the way the ICS ROMs ran so I man end up moving to that firmware in the future but thank you very much with the explanations that REALLY helped a lot!!
Have a great 4th!!
Click to expand...
Click to collapse
ICS is the way to go, and for it to run properly you should run the latest RUU leak. This will give you the correct firmware. Once you flash the recovery of your choice back onto your phone and re-root, you really should S-off. Amon-Ra is the best initial Recovery choice, because it'll root anything, right there in recovery. S-off simplifies EVERYTHING. From there, you can flash the ICS Rom of your choice, and not have any of the issues you've been reporting.
With S-off, you can flash whatever radio you want, put a different boot-up splash screen on, and the kernel installs automatically when you flash a Rom.
It's a little time consuming, but it isn't difficult. There are threads from some very helpful guys here that explain how to do everything. So when you have some time, I suggest you just go for it. You'll be glad you did.
Best of luck,
BBEgo
ericsignals said:
You can upgrade to ics firmware (via ics ruu). However with s on, you can only run the ruu you are currently on and/or newer versions/leaks.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
I'm still a little leary on doing the S-OFF so I have a question on this.. What do you mean by this?? What has to match to be able to run ICS ROM's.. Are you saying the ICS Firmware version needs to match the ICS ROM?
My wife's Evo kept failing the 3.17 OTA so I moonshined it this week to allow her to get on latest firmware and software. She is stock other than S-off and root. I am fully aware that the firmware/radio and software are two different things. After getting S-off I flashed the current 3.17 bootloader firmware from Captain's thread and all went well and she is now on 1.13.11.0830 radio. Now I want to get her the software updates to move her from 3.16.651.xx to 3.17.651.4. My question is how to best do this. My thought is to flash the stock rooted deodexed rom but I didn't know if there was an alternative better way. Also, considering that an OTA upgrade of software is a dirty flash sort of, can I dirty flash stock rooted 3.17 over her current 3.16 without doing full wipe. Yes, I realize full wipe would be best and I am willing to do that if dirty flash is a mess. But, for time saving, is there any real danger in dirty flashing stock rooted 3.17 over her current stock rom with s-off and root? It just seems to me to be the rooted equivalalent of taking the OTA update.
Thanks for any advice.
evoimevo said:
My wife's Evo kept failing the 3.17 OTA so I moonshined it this week to allow her to get on latest firmware and software. She is stock other than S-off and root. I am fully aware that the firmware/radio and software are two different things. After getting S-off I flashed the current 3.17 bootloader firmware from Captain's thread and all went well and she is now on 1.13.11.0830 radio. Now I want to get her the software updates to move her from 3.16.651.xx to 3.17.651.4. My question is how to best do this. My thought is to flash the stock rooted deodexed rom but I didn't know if there was an alternative better way. Also, considering that an OTA upgrade of software is a dirty flash sort of, can I dirty flash stock rooted 3.17 over her current 3.16 without doing full wipe. Yes, I realize full wipe would be best and I am willing to do that if dirty flash is a mess. But, for time saving, is there any real danger in dirty flashing stock rooted 3.17 over her current stock rom with s-off and root? It just seems to me to be the rooted equivalalent of taking the OTA update.
Thanks for any advice.
Click to expand...
Click to collapse
Your firmware is updated.
Software is based on the rom you are running if you flash a 3.17 rom you will be updated in that area also.
As for dirty flashing it's not a good idea to dirty flash when going to a new base
thanks bigdaddy, I appreciate the response. Is there any downside to being on older software and newer firmware? I thought Captain TB or someone had said that the firmware and software are optimized to work together and shouldn't be out of sync. If that is the case I probably need to bite the bullet and go ahead and wipe and flash the stock rooted deodexed rom to get her the software update.
bigdaddy619 said:
Your firmware is updated.
Software is based on the rom you are running if you flash a 3.17 rom you will be updated in that area also.
As for dirty flashing it's not a good idea to dirty flash when going to a new base
Click to expand...
Click to collapse
Is it just me... Other than stock rooted 3.17, I'm not seeing any custom roms for this base. Im still using mean bean.
Sent from my EVO using xda app-developers app
lanewhit said:
Is it just me... Other than stock rooted 3.17, I'm not seeing any custom roms for this base. Im still using mean bean.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
I think it is kind of what bigdaddy was saying and what CTB has said...3.17 is the software update that brought the firmware update if done OTA. I believe what CTB did was extract the firmware so people could update the radio/firmware without installing the OTA or stock 3.17 ROM. So, you can have latest radio/firmware with CM10.2 for instance. In my case, my wife wants to keep stock as much as possible so I was trying to figure out best way to get her to most recent stock software without taking it OTA. I think the way to do that is going to be to flash 3.17 stock rooted rom. As you mentioned I haven't seen many/any roms built from 3.17 source if it has even been released at all yet. I moved to CM roms long ago and haven't used any Sense roms since meanbean 3.09 which last I checked hadn't been updated in months. There are plenty of CM10.2 based ROMs available that have tons of updates and fixes. I left my wife's stock because otherwise I get blamed every time Sprint or htc messes something up. This way I can say I didn't touch her phone. By s-off and rooting it and installing stock rooted deodexed I am opening myself back up to her wrath but so be it. It's better than her telling me 4 times a day that her phones says an update is ready but fails every time she tries to install it OTA. It's all about path of least pain. LOL.
I would flash the new rooted base. As I mentioned before, I'm on mean bean 3.09 with the updated firmware from the Captains thread and all has been working great.
Sent from my EVO using xda app-developers app
lanewhit said:
I would flash the new rooted base. As I mentioned before, I'm on mean bean 3.09 with the updated firmware from the Captains thread and all has been working great.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Cool. Thanks for that info. I think I am going to do a twrp backup and a dirty flash of stock rooted first. I know that's not the best and most advisable route but dirty flashing is underrated. If things are wonky I will wipe and factory reset and flash again. Dirty flashing a new base on top of the old isn't THAT much different than getting the software update OTA. I trust dirty flashing more than I trust Sprint to be able to seamlessly deliver it. Probably do it tonight while she's asleep and see if she notices anything different tomorrow. I'll just blame Halloween spooks and goblins if things go wrong.
I got a used Note 2 that was already updated to the mj9 version with the locked bootloader. I rooted it using saferoot and installed safestrap.. Been trying out the mj9 roms and I like the ones I've used, but I want to know if there's a way to update this still awesome beast of a phone to nd7 or higher. I've downloaded the I605VRUFND7_I605VZWFND7_VZW.zip file from samroms, but it's still sitting untouched because I haven't seen anything definite.. I'm currently running Alliance build 26 mj9 version, but I also have build 30 nd7 version and Nephilim.STABLE.EMJ9.ROM.v8.0-FINAL-R3Ds.zip
downloaded and sitting on my sdcard with the official nd7 update from samroms..
Basically I wonder if I can just Odin the official samroms nd7? If there is a bootimg I need to delete first? Can I wipe and install the alliance build 30 for nd7?
I suppose mainly I want to get a newer Android version going and want to know the best way to go about it.. The phone isn't activated with Verizon, and I only use it on Wi-Fi, not as an actual phone..
Any tips, suggestions, or ideas are appreciated. Thanks in advance to the best community out there..
Sent from my SCH-I605 using XDA Free mobile app
The:Dude said:
I got a used Note 2 that was already updated to the mj9 version with the locked bootloader. I rooted it using saferoot and installed safestrap.. Been trying out the mj9 roms and I like the ones I've used, but I want to know if there's a way to update this still awesome beast of a phone to nd7 or higher. I've downloaded the I605VRUFND7_I605VZWFND7_VZW.zip file from samroms, but it's still sitting untouched because I haven't seen anything definite.. I'm currently running Alliance build 26 mj9 version, but I also have build 30 nd7 version and Nephilim.STABLE.EMJ9.ROM.v8.0-FINAL-R3Ds.zip
downloaded and sitting on my sdcard with the official nd7 update from samroms..
Basically I wonder if I can just Odin the official samroms nd7? If there is a bootimg I need to delete first? Can I wipe and install the alliance build 30 for nd7?
I suppose mainly I want to get a newer Android version going and want to know the best way to go about it.. The phone isn't activated with Verizon, and I only use it on Wi-Fi, not as an actual phone..
Any tips, suggestions, or ideas are appreciated. Thanks in advance to the best community out there..
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
Since your bootloader is locked (and the bootloader is unlockable on 4.3+), the only options I can think of for you would be to.... 1). either stay on 4.3 MJ9 with Safestrap and use 4.3 stock based roms - OR - 2). upgrade the phone to stock 4.4.2 and then root it with Ghettoroot and use Safestrap to run 4.4.2 stock based ROM's. (Due to having a locked bootloader-- you are forced to use stock based ROM's that use the stock kernel when using Safestrap). So, if your phone is on a 4.3 based bootloader - you have to stay with 4.3 based stock ROM's. Once you go to 4.4.2, you have to stay with 4.4.2 stock based ROM's.
My Note 2 is still on the 4.1.2 bootloader, so I haven't personally had to use Safestrap on the Note 2.... but I've read where others say that they've successfully used Safestrap on 4.4.2 after getting the phone rooted.
Personally, I prefer 4.3 to 4.4.2 on my Note 2. I could never find a 4.4.2 based ROM that didn't have some sort of bug that drove me crazy(ier). Either the bluetooth audio would stutter, I would get a lot of lagging with the UI, or would get poor battery life. However, many others report having good success with 4.4.2, so you might be happy with upgrading. I actually decided to come back to the 4.3/MJ9 based Jett ROM v. 3.0, as it does everything that I want in a ROM, works well with my Sony SW3 smartwatch, and runs very stable with great battery life. If you haven't tried out Jett ROM yet, you might want to give it a try (you can find it in the development forum).
Since your phone isn't activated - you obviously won't be getting OTA's, so you'll have to use ODIN if you want to upgrade. If you do decide to upgrade the phone to 4.4.2, you won't be able to return to 4.3 again due to the locked bootloader issue. Also.... if you upgrade 4.4.2, you may want to restore back to total stock 4.3 first and make sure it's wiped clean with a factory reset-- just to make sure nothing is leftover that could mess up the upgrade to 4.4.2.
Good luck!
Hey mattnmag, thanks for the info! It was a good read, and I didn't realize that if I upgraded to kit kat I wouldn't be able to downgrade back to jellybean if I didn't like it.. I've still got all the files I need except for the mj9 stock firmware, so I'll have to dl that before I get too crazy with this thing..
But I did dl the Jett ROM, and I'm gonna give that a run later tonight probably.. Just gotta get my backups onto the PC first just in case.. I hate doing full wipes though.. Because I'm lazy and don't like reinstalling everything lol..
What I'd really like it's too have my cyanogenmod back.. I had that on my old Droid RAZR and loved it..
Sent from my SCH-I605 using XDA Free mobile app