Bought this case from amazon recently and I just wanted to share that it's amazing.
I always hated a wallet AND phone in my pocket. I always combined them (phone into wallet, or credit cards in case for phone) and this is the perfect combination for me. Allows for a great protective case, while also carrying 4 cards and a few bills for when cash is needed.
I highly reccomend this case.
Only downside: magnet is a little weak. If i ever get ambitious enough I may go in and put in a stronger magnet to really make the latch 'CLICK'. It doesn't come undone on a regular basis, but I would prefer it to snap into place when it gets close.
Enjoy!
I'm interested, but how does it function as a phone/camera? It has cutouts in the back for phone and speaker, but I don't see how you could open the case and use it comfortably without folding the front cover over the back - which would muffle the speaker or block the camera. How do you handle that?
Generally I fold it, or use it like a book. Both work well, just depends on what exactly I am doing. I set it on a table like a book usually. Or fold it to make a phone call. I honestly haven't taken many pictures since the case, but it's really easy to hold like a book and isn't really an issue.
Folding the flap around the back doesn't actually muffle the speaker, there's a gap so the sound gets out. I actually find that the speaker is a little louder than before if I fold the flap over and point the end towards me as it makes the sound waves a bit more directional.
A few pictures would be helpful. Try to take some, with your phone in if possible. I'm intrigued, but the site you linked doesn't show what it looks like opned or in use.
Thanks in advance.
Took these with my camera. Not the best quality, but should show the important views.
Album here:
http://imgur.com/a/wdJh0
boardsportsrule said:
Took these with my camera. Not the best quality, but should show the important views.
Album here:
http://imgur.com/a/wdJh0
Click to expand...
Click to collapse
Thanks for answers and pics - based on the location of the card slots and the magnet(s), I'd be concerned about damaging any cards (unless it's shielded, which I don't see listed). But I'll keep an eye on it (when the dark brown is available again, it's out of stock ).
I thought cell phones were not good to place next to cards with magnet strips? Correct me if I'm wrong.
alacrify said:
Thanks for answers and pics - based on the location of the card slots and the magnet(s), I'd be concerned about damaging any cards (unless it's shielded, which I don't see listed). But I'll keep an eye on it (when the dark brown is available again, it's out of stock ).
Click to expand...
Click to collapse
The magnet is pretty weak. I considered this as well, but I have been using the SD card and haven't had any issues. Only used it for a week, but no problems so far.
It was pretty cheap (>10$ i believe) so it's worth a check if it comes back in stock
ryude said:
I thought cell phones were not good to place next to cards with magnet strips? Correct me if I'm wrong.
Click to expand...
Click to collapse
This has been debated. Tested on Mythbusters and found that you needed an incredibly strong magnet to wipe the data off the creditcard strip.
I don't believe that your phone could produce strong enough magnetic fields that it'd wipe the data from a card, but it could be possible if something was going wrong.
I have stored my CC's in my phone (modified various cases) for >1 year and never had an issue. This is the first case that I have used designed for this, and keeps the cards further from the phone than my hacked together ones, so I am not too worried.
Cool case man, I have a case like that for my legacy zune, i got a golla pouch for under $2 on ebay. Loops on to my belt and has slots where you can put some cards and rear 2nd pouch for even usb drives or other gizmos. Stays slim too!
Sent from my SAMSUNG-SGH-I777 using XDA
Related
Hey guys - does anyone know of any after-market battery covers for the HD that would be metal - specifically for the purpose of attaching to a magnet? I purchased one of those magnetic "cradle" kits that is basically just a big magnet you stick onto whereever, with a little metal slab that you stick onto the back of your phone. Then - you can just stick the phone up close to the magnet and it sticks - a perfect low-profile car cradle. The metal slab that sticks to the back of the phone is thin - it doesn't really stick out any further than the camera housing - but it still isn't as sleek as just the phone by itself. I thought a replacement battery cover that sticks to the magnet would be perfect. So... does anyone know of any? Or perhaps a vendor that could custom-machine one?
SolusCado said:
Hey guys - does anyone know of any after-market battery covers for the HD that would be metal - specifically for the purpose of attaching to a magnet? I purchased one of those magnetic "cradle" kits that is basically just a big magnet you stick onto whereever, with a little metal slab that you stick onto the back of your phone. Then - you can just stick the phone up close to the magnet and it sticks - a perfect low-profile car cradle. The metal slab that sticks to the back of the phone is thin - it doesn't really stick out any further than the camera housing - but it still isn't as sleek as just the phone by itself. I thought a replacement battery cover that sticks to the magnet would be perfect. So... does anyone know of any? Or perhaps a vendor that could custom-machine one?
Click to expand...
Click to collapse
I made my own magnetic car holder solution. Didn't cost much and can't imagine it work better than this...
I can't see what you've done there... It looks like some sort of metal on the battery itself, so that the regular cover works fine... What is that? How is it affixed?
Jouh has placed 2 razor blades on the battery.
Cool! I'm going to try that...
just don't take ur phone to the airport...... they might think ur going to use the razorblades for other non magnetic purposes.
Ohh! Good point! I would have completely forgotten about them and then been really screwed - I actually have to run my mobile through an X-ray every day at work... That could be an issue. Oh well - back to the drawing board...
just do the same with any thin metal i.e. sheet steel.
spzero said:
just do the same with any thin metal i.e. sheet steel.
Click to expand...
Click to collapse
I really wouldn't recommend directly attaching the phone to strong magnetic sources. It may impede the functionality, reduce or affect the battery operation, interfere with the many antennas in the phone, not to mention run the risk of corrupting memory sticks etc?
The phone itself isnt that heavy so probably wouldnt need a strong magnet, but you'd want to use something quite strong just to hold it in place. Imagine driving over a speed bump or pot hole which dislodges the phone and makes it go sliding across your dash board and out of an open window. (worst case scenario..)
If youre looking for a quick release holder I would recommend something that you clip the phone into like those hip holsters and then find one that has a socket connection to a window mount.
makaveli2g said:
I really wouldn't recommend directly attaching the phone to strong magnetic sources. It may impede the functionality, reduce or affect the battery operation, interfere with the many antennas in the phone, not to mention run the risk of corrupting memory sticks etc?
The phone itself isnt that heavy so probably wouldnt need a strong magnet, but you'd want to use something quite strong just to hold it in place. Imagine driving over a speed bump or pot hole which dislodges the phone and makes it go sliding across your dash board and out of an open window. (worst case scenario..)
If youre looking for a quick release holder I would recommend something that you clip the phone into like those hip holsters and then find one that has a socket connection to a window mount.
Click to expand...
Click to collapse
I used the same razors and the same magnet (This one) with my SE P1i for 1½ year without any issues.
And the phone doesn't move 1 mm even driving over the biggest speed bump in Sweden.
makaveli2g said:
I really wouldn't recommend directly attaching the phone to strong magnetic sources. It may impede the functionality, reduce or affect the battery operation, interfere with the many antennas in the phone, not to mention run the risk of corrupting memory sticks etc?
The phone itself isnt that heavy so probably wouldnt need a strong magnet, but you'd want to use something quite strong just to hold it in place. Imagine driving over a speed bump or pot hole which dislodges the phone and makes it go sliding across your dash board and out of an open window. (worst case scenario..)
If youre looking for a quick release holder I would recommend something that you clip the phone into like those hip holsters and then find one that has a socket connection to a window mount.
Click to expand...
Click to collapse
I honestly couldn't think of one thing that a magnet could have an effect on in the phone, certainly not the memory. The only type of memory that is affected by magnets are HDD (because the data on the disks is stored magnetically) and credit cards (once again, data stored magnetically). However, RAM/ROM is completely different and relies on gates and latches to store data, neither affected by magnet. Not to mention even if it did have an HDD (like old school mp3 players/iPod) it would take a strong magnet (mainly electromagnet) to corrupt the memory. Likewise, I can't foresee it having any affect on the battery or interfering with the antenas (unless you're using some super strong magnet....which you're likely not)
One of the only build quality problems i have with the Touch HD is that the battery cover creaks when pressed in certain spots.
To revive this topic, does anybody know of an actual aftermarket battery cover for this phone, preferably metal?
I searched google to find no results. It seems like it would be a good idea to make these
You can also shave the inside of the battery cover with a small sander. Than add ANY kind of magnet that will than fit inside the cover. The plastic cover is THICK so you can shave enough for some type of magnet.
I would also like a metal/rubber etc back cover. The quality of the orginal cover is driving me nuts..
Has anyone found this kinda aftermarket item?
sudo_x60s said:
I would also like a metal/rubber etc back cover. The quality of the orginal cover is driving me nuts..
Has anyone found this kinda aftermarket item?
Click to expand...
Click to collapse
Any news on that topic?
*Note i have not experienced whether the product lives up to its name or not. I only JUST placed it on my device. This is simply my first impression.
**I included pictures of my device compared to the back parts of the adhesive so you can fully grasp the wonderful "custom to fit" experience.
I just now got as close to perfection as i think i am going to get with placing my "custom to fit" screen protector onto my device. At very first glance i saw that their were going to be some slight imperfections. The random circle on the top right of the adhesive was a dead giveaway. The cut out they have for the top speaker and the bottom row of buttons is hardly CLOSE to the size it should be. It is much too big. I am not sure if it is clear enough in the pictures but their is excess adhesive on the sides. I figured they may be meant to fold down to protect a minuscule amount of siding. At first i could not get it to stick on the sides. But after giving it a few minutes to settle and let the application spray* dry, it seems to be holding. However, the border has really ugly bubbles from the very tony inlay of the front of the phone. The instructions say that MICRObubbles will disappear in their own after a couple days... i hardly find these MICRObubbles though. We will see. I think it is almost supposed to have a "melting" effect on the device. Like heated plastic sort of taking the proper shape over the device.
Now we move onto the back. You will see that i have been given 3 holes instead of 2. (2 being the camera lens and the button underneath). I have no idea what the third was meant for.... I can also forget about taking the backing off of my device as it is now sealed shut with the plastic invisible shield. This doesn't bother me that much since i rarely ever have to take the back out but i know their will be a day where i will need to.
All-in-all the product LOOKS promising still. The bottom line here that i would like to make is that i have NO idea what TouchPro2 they are basing this off of. but it is far from mine. Too far. I need to check but i am also fairly certain they ask for your provider too (in case the device is different than others)
I am also still wondering about the excess sides. it is very random in the back but they make no mention of needing to trim the shield.
*They give you a spray that you use on your fingertips and the adhesive so that a. you dont give it fingerprint smudges and b. it doesnt fully stick right away so that you can "slide" it into place. I found that "sliding" it around was impossible because it still stuck but it did not stick enough to the point i was unable to retry.
I really hope this means something to somebody. Had i read something like this before hand, i may have thought longer on buying the product. I will be sure to write more in the next few days. By the feel of the material on my phone, it seems like it could work really well.
I would also love to know other people's experience with this product and even maybe correct me if anything i complained about was just due to stupidity.
It very much looks like you bought Invisible Shield for the wrong Touch Pro 2 model.
It looks like you have the one for the unlocked/unbranded model:
http://www.zagg.com/invisibleshield/htc-touch-pro-2-cases-screen-protectors-covers-skins-shields.php
When in fact you want the T-Mobile model.
http://www.zagg.com/invisibleshield/htc-touch-pro-2-t-mobile-cases-screen-protectors-covers-skins-shields.php
It looks like the shape of your T-Mob branded TP2 is actually quite different from the unbranded version. The shape of the shield is therefore quite different between the models, based on the pictures on the Zagg website. Also, the layout of the battery cover is totally different, which is why the cutouts on the shield don't match your battery cover. This also accounts for the 3rd small hole on this piece. In addition to the camera lens and speakerphone button, the unbranded TP2 has small holes for the speaker just below the speakerphone button, and that is what the 3rd hole in the shield is for. I'm guessing on the T-Mob version, the speaker hole is located as part of the larger cutout/hole.
Not to be mean but it's really obvious that it wasn't made for a T-Mobile Touch Pro2 and you should have known that it wasn't the right one.
Just going to the Touch Pro2 forums you can see that there's different versions of the device and ours is usually always referred as the "T-Mobile Touch Pro2" when being specific.
The cover does seem worth buying though.
Yeah i just inquired about it. I did buy the T-Mobile one and they just sent the wrong one.
redpoint73 said:
In addition to the camera lens and speakerphone button, the unbranded TP2 has small holes for the speaker just below the speakerphone button, and that is what the 3rd hole in the shield is for. I'm guessing on the T-Mob version, the speaker hole is located as part of the larger cutout/hole.
Click to expand...
Click to collapse
Oddly, the Tilt2 had little holes in the back case in the same spot, despite the fact that it is just the battery sitting behind the holes. I always figured it was just a way to give water quick access to the battery compartment to turn that little strip pink incase we ever dropped it somewhere damp...
I bought one of these for my dad: http://www.amazon.com/gp/product/B005KK9C7C
Terrible case. It was nearly 40 dollars, and it's just about the worst way to spend that much money. I wrote a review (only review) on amazon:
I ordered this case a week ago. It just came in today due to some difficulty with USPS, not Amazon's fault. I opened the packaging, and it was clear that it was a cheap product. It comes in a simple small box, something you would expect from a Chinese ripoff. The leather material is of ok quality. It doesn't scratch, and it is a nice color. However, the actual plastic which holds the phone is cheap, and mine came with a few chips on the edges. It feels like the phone could fall out any minute. The hold is not secure at all. The design of the case is overall terrible. The credit card slots won't expand, so putting more than one card in each slot is nearly impossible. The extendable flap is too loose, and often extends while in my pocket, allowing my pocket contents to come in contact with the phone's screen. Finally, the worst draw back is charging. I have to open the case entirely (flip it open) to charge the phone. The charging slot is at the bottom of the phone, and the case is made so the credit card holding section flips from the bottom to the top. This means there is a strip of leather blocking the charging port. Un-doing the button flap won't fix it, you have to completely expose the screen the charge the phone.
Click to expand...
Click to collapse
So if anyone was thinking of buying this case: don't.
My dad still needs a new case. He insists on one of these types of cases. I've never used one, and I've looked at the normal companies, haven't found anything good. Does anyone know of one?
So I've found some vent-mount car docks on eBay (mainly shipping from overseas and all for the International versions of the Note). Does anyone know of any vent-mount car docks being sold in the U.S. (I just want it to arrive fast) and for the AT&T version of the Note?
Main reason I want the vent-mount instead of the official windshield/dash mount is because I had the Atrix on a windshield mount and the Atrix screen got heat damaged. I want to avoid that problem with my Note.
Thanks in advance!
UPDATE:
I ended up getting all of the following:
Car Mount: http://www.proclipusa.com/brodit-device-holder/samsung-galaxy-note-(gt-n7000)/holder-with-tilt-swivel-511303-18842.aspx (with associated mount for my specific car)
Case: http://www.amazon.com/gp/product/B006ZZTCZI/ref=oh_o00_s00_i00_details
Screen Protector: http://www.amazon.com/gp/product/B00772FXX8/ref=oh_o01_s00_i00_details
USB Car Charger: http://www.amazon.com/gp/product/B0064X1COK/ref=oh_o02_s00_i00_details
I love this phone
In case anyone is also looking for this, I decided to take the advice from another post I saw in the other car dock thread: http://forum.xda-developers.com/showthread.php?p=22693025#post22693025
gtnote said:
youll love the proclip, it just looks so profesional and great quality, i just ordered the clip for the note since i already have the dash mount i have used for my last 3 phones, great customer service high quality item and an american company, i applaude you
Click to expand...
Click to collapse
I appreciate your link to them. I would never have found them without it (I've googled a LOT ).
I love the idea of that case, its like a wallet and phone case in one. However I can imagine that the credit cards pressing against the screen are going to leave visible marks on your screen. Maybe not scratches or damage, but lines where the plastic/dirt will be rubbing against the glass.
Its a similar problem that happens with some laptops where the keyboard leaves marks on then screen when closed and moved a lot.
screen protecter installed? ^^
Pops_G said:
I love the idea of that case, its like a wallet and phone case in one. However I can imagine that the credit cards pressing against the screen are going to leave visible marks on your screen. Maybe not scratches or damage, but lines where the plastic/dirt will be rubbing against the glass.
Its a similar problem that happens with some laptops where the keyboard leaves marks on then screen when closed and moved a lot.
Click to expand...
Click to collapse
It's something I'll definitely keep a watchful eye on, but thanks for pointing it out (I didn't really think about this). I'm not sure yet about using it as my wallet, but I'd like to eventually be able to. A lot of credit card companies are now doing flat cards (no raised bevel on the numbers, since they're really not useful like that anymore). Also I'll definitely have the screen protector on it and hopefully that'll save any wear/tear on the screen itself.
I had an amazon gift card to use up, and we're planning a road trip to a waterpark so I decided to use the gift card to try and find a waterproof/water-resistant solution for my lte. I wasn't going swimming with these, but I did want to protect my phone from the the occasional dunk or splash, and I didn't trust a ziplock bag to do the job. I also didn't want to spend a lot (otherwise I would have gotten the overboard case).
I ended up ordering the following cases;
BestDealUSA Waterproof Underwater Pouch Dry Bag Pack Case Cover for Cell Phone PDA Blue - $2.96
Waterproof Case for Apple iPhone 4, 4S - Also Works with iPod Touch, iPhone 3G, 3GS, & Other Smartphones - IPX8 Certified to 100 Feet - $4.57
Universal Waterproof Bag Case for Cell Phone / PDA, Blue - $0.01
Universal Waterproof Bag Case for Cell Phone / PDA, Black - $1.92
BestDealUSA Waterproof Underwater Pouch Dry Bag Pack Case Cover for Cell Phone PDA Blue
The plastic material seems strong on this case, and the seal seems like it would do a good job to keep the moisture out. The evo slides in and out easily, even with a tpu case, although it does it need to go in upside down if you want to take pictures - otherwise the camera is blocked by the opaque section of plastic, but this is not a big deal. There is a raised seal around the window of clear plastic (which takes up about 4/5ths of the phone screen) that makes pulling the unlock ring a little difficult, but not impossible. This is the biggest of the cases, with the most space around the phone. Screen responsiveness through the plastic is good, and the the window is clear, so its easy to see the phone screen. Lanyard runs through the width of the case, and seems very strong - I don't see it snapping or anything.
Waterproof Case for Apple iPhone 4, 4S - Also Works with iPod Touch, iPhone 3G, 3GS, & Other Smartphones - IPX8 Certified to 100 Feet
This one looks very similar to the higher priced overboard case and has great reviews. The areas surrounding the clear windows are puffy, as if it would allow the case to float. Unlike the other cases (which use a combination of two ziplock-type closure zips), this one has a plastic mechanical mechanism to squeeze and hold the opening shut like a vise. I don't know if I would trust this case to remain underwater for any length of time. It doesn't seem to seal as well as I would like, although the reviews all rave about how watertight it is. Having said that, the phone fits in this case perfectly with the tpu case, and even better without a case (upside down again), without being too snug, and the clear windows are exactly the size of the phone screen - only the capacitive buttons are hidden. Screen responsiveness through the plastic is good, and the the window is clear, so its easy to see the phone screen. The puffy areas around the clear screen also do a really good job of holding the phone in place, but makes it a bit difficult to press the power button. The lanyard that this case with end in what appears to be a thread that you loop through an opening in the case and seems like a good tug would snap it off.
Universal Waterproof Bag Case for Cell Phone / PDA, Black/Blue
I was only going to get the black one, but when I saw the blue one for a penny, I decided why not. These are identical cases, but one is black, and one is blue. These are the snuggest cases, and its a challenge to get the phone in, even without the tpu case. The plastic material the cases are made of is very tacky on the inside, so the phone tends to get stuck when you put it in or take it out. The plastic also seems thinner on these than the other cases, and the seals around the edge don't seem very reliable. Once the phone is in though, it's the most compact and pocketable of all of the cases. These cases do not have a clear window on both sides, so if you want to use the camera, then the phone screen will be covered by the translucent side of the case. It's not too bad, and the screen is still visible, but in bright situations, this could be an issue. Having said that, screen responsiveness is very good with these cases, most likely due to the thinness of the plastic. Lanyard goes through hole in the case and seems strong enough. These also come with an arm band that may fit you if you have the arms of a small child. They're really, really small.
Final thoughts - All of these would probably do a good job to keep water and moisture off of the phone (or even sand if you're going to the beach), and I think any of them would be fine to protect against accidental splashing. If I was going diving or swimming with my phone, I would probably shell out the extra cash for the overboard, or at least do some serious waterproof testing on these first. As it stands, I think I'll end up using the first case - Not too crazy about the blue, but I think it will do the best job of keeping the phone dry, and I won't need to worry about going down the log flume with it in my pocket or around my neck (like a tourist, lol).
Hey man, thanks for the reviews. I didn't even know you could get waterproof cases/bags so cheap.
I'll have to pick one up now.
I do suggest you update the prices in your post to include the shipping though for a better cost comparison (even though the difference here is minimal). So many venders inflate the shipping to make up the difference for a $0.01 item.
p.s. I'm going to pick up the first one as well since it looks like I can easily have it in my pocket as a just in case. (I'm in Florida and we have crazy torrential thunderstorms out of no where, so if I'm out jogging, I can have it in my pocket just in case.
Though expensive, Lifeproof cases are really nice. Ive known many people to go out in the ocean and take pictures under water with them.
Just an update, I did end up using that first case, and although it never went underwater, it got splashed on alot. Phone stayed dry, it fit great in the bathing suit pocket, and even took some great pics through the case. Would definitely recommend.
Quick update from me too. I ended up ordering this case: http://www.amazon.com/gp/product/B0058NXWPY/ref=oh_details_o02_s00_i00
Used on a canoe trip. The canoe flipped and it went underwater for around a minute or so, and air dried after, did a great job. Would recommend this one!
i am using the first case, blue, as well. Works fine, keeps my phone dry in a 10ft deep pool. Takes picture fine too. Thanks for the review OP.
I actually prefer these right here. They come in different sizes I prefer the 6-1/2 x 3-1/4I can't confirm they work in 100 ft of water because I have no reason to be that deep ever in my life, but for the average rainy day, screwing around by the pool or working out these work great. The best part is the patented purple zip technology that lets you visibly confirm the case is sealed. Also pics turn out great. Good luck in your decision
Asadullah said:
I actually prefer these right here. They come in different sizes I prefer the 6-1/2 x 3-1/4I can't confirm they work in 100 ft of water because I have no reason to be that deep ever in my life, but for the average rainy day, screwing around by the pool or working out these work great. The best part is the patented purple zip technology that lets you visibly confirm the case is sealed. Also pics turn out great. Good luck in your decision
Click to expand...
Click to collapse
Hahaha that had me laughing so much once I read the whole thing then clicked on the link. Good one!
Sent from my EVO using xda premium