After wiping Data/Factory Reset and flashing CM9 successfully on my GSII I can't get any ROM to boot successfully! The other ROM boots but everything Force Closes! I have tried wiping Cache!
One more bug, After doing a factory reset via CWM and flashing a ROM except CM9 it goes into a BootLoop! Can't fix it ! Help would be greatly appreciated.
upload the official rom from Samsung always helps
roadkill33 said:
upload the official rom from Samsung always helps
Click to expand...
Click to collapse
I have flashed ROM from odin and it works but I need CWM to flash my own builds! How can I achieve that??
Taimur Akmal said:
I have flashed ROM from odin and it works but I need CWM to flash my own builds! How can I achieve that??
Click to expand...
Click to collapse
Reroot with a CF root kernel.
Use CF Root on the original ROM you installed?
EDIT - Sorry, Missed the post above.
3xeno said:
Use CF Root on the original ROM you installed?
EDIT - Sorry, Missed the post above.
Click to expand...
Click to collapse
I flashed CF-Root KI3 after flashing KI3 firmware! Still no avail!
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Related
HEY HO
This topic is about YOUR ways to full wipe/reset/restore a Samsung galaxy S2 !!!
! Not the halfwipes with caches factory reset and flashing rom. !
Looking for the REAL restoring.
This has to include the whole Phonesoftware! How to install your phone brandnew if anything went wrong. How to install even every phone driver ... EVERYTHING ^^
Lets see what you have got in your Pocket
? Provide one yourself.
use an usb jig and flash a stock rom
Boot |CWM recovery mounts and storage format cache system dalvik data and sd card
Phone empty flash stock rom through Odin .reset custom rom counter with USB jig if needed .
Real restore and brand new comment would make the assumption that the user had saved the original firmware or at least had access to a copy . In which case replace original firmware by flashing via Odin instead of stock rom .
Fairly simple tasks .
jje
Did you just steal one?
akbarhash said:
Did you just steal one?
Click to expand...
Click to collapse
xD no ... my wifi driver just doesnt work anymore and I flashed the stock rom (from samfirmware.com) about 3-4 times now but it doesnt "repair" the driver or anything ^^
I have been helping the OP try to Fix his wifi problem and the first thing we suggested is to flash back to the factory state.
Even after doing a full wipe there are files missing on his system preventing the WIF from working. in particular the following files are missing:
/data/.cid.info
/system/etc/wifi/nvram_net.txt
Who knows what other files are missing.
So my question is how come after the OP did the following using clockworkmod
wipe system
wipe data
wipe cache
wipe dalvik-cache
These are STILL missing files after restoring the stock ROM. Are these files not part of the system ROM? or are the generated automatically by some start-up script on first run. I suspect that some first run start-up script is not being run on the OP S2 which would normally generate the missing files.
So the question is how to do a complete factory reset of the S2 in cases were some of the original files have got corrupted or deleted.
(for the background on this problem read thread http://forum.xda-developers.com/show....php?t=1285249 )
Come on guys we can help the OP rebuild his S2.
So the question is how to do a complete factory reset of the S2 in cases were some of the original files have got corrupted or deleted.
If the factory files are corrupt on the device you will need new firmware .
Factory = the last firmware to be flashed .Restore copy is whats flashe d on wipe and factory reset .Factory reset returns to last flashed firmware NOT original firmware that came with the phone out of the box .
If you follow my post above then you end up with an empty phone with a clean sd card .
Flashing either original firmware or Stock Samsung firmware via Odin as the next step .
Simple as recovery /format /Odin /flash.
jje
JJEgan said:
If you follow my post above then you end up with an empty phone with a clean sd card .
Flashing either original firmware or Stock Samsung firmware via Odin as the next step .
Simple as recovery /format /Odin /flash.
jje
Click to expand...
Click to collapse
I gonna follow this soon ... thanks so far ... hope it helps ...the firmwares like KI3 of samfirmware.com are original firmware or stock samsung firmware or am I wrong?
Weste90 said:
I gonna follow this soon ... thanks so far ... hope it helps ...the firmwares like KI3 of samfirmware.com are original firmware or stock samsung firmware or am I wrong?
Click to expand...
Click to collapse
Samfirmware mostly stock Samsung .
Stock Samsung roms posted on XDA .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Original branded provider roms posted on XDA
http://forum.xda-developers.com/showthread.php?t=1113928
jje
O.O does flashing a new rom break some part of the phone like the wifi in this case ?
And I thought bricking the phone is the least I should care about =.="
Weste90 said:
xD no ... my wifi driver just doesnt work anymore and I flashed the stock rom (from samfirmware.com) about 3-4 times now but it doesnt "repair" the driver or anything ^^
Click to expand...
Click to collapse
That's because a stock rom might not come with a stock kernel.
Your problem sounds like a kernel problem, not necessarily a ROM problem. My suggestion is to wipe /system, /data, /cache, and then install a fresh CM7 nightly. These come with ROM AND Kernel. If your wifi works in CM7 then you know for sure your phone isn't damaged. If wifi still doesn't work, you may have to return your phone.
JJEgan said:
Boot |CWM recovery mounts and storage format cache system dalvik data and sd card
Phone empty flash stock rom through Odin .reset custom rom counter with USB jig if needed .
jje
Click to expand...
Click to collapse
did it exactly that way ... problem still is the same ... nothing changed
*2767*3855#
aerobahn said:
That's because a stock rom might not come with a stock kernel.
Your problem sounds like a kernel problem, not necessarily a ROM problem. My suggestion is to wipe /system, /data, /cache, and then install a fresh CM7 nightly. These come with ROM AND Kernel. If your wifi works in CM7 then you know for sure your phone isn't damaged. If wifi still doesn't work, you may have to return your phone.
Click to expand...
Click to collapse
hmm I flashed with cf root kernel ... it should be the stock kernel or am I wrong ?!?
For the record the offending two lines in his logcat are:
E/WifiHW (2927): return of insmod (args:firmware_path=/system/etc/wifi/bcm4330_sta.bin nvram_path=/system/etc/wifi/nvram_net.txt) : ret = -1, Invalid argument
E/WifiService(2927): Failed to load Wi-Fi driver.
Does any body know if these two errors are caused by a hardware or software problem?
Intratech said:
*2767*3855#
Click to expand...
Click to collapse
Just about to say the same.
Just enter that in dialer. It will reinstall the firmware.
Sparksltd said:
Just about to say the same.
Just enter that in dialer. It will reinstall the firmware.
Click to expand...
Click to collapse
Including the kernel?
Sent from my GT-I9100 using XDA App
super ext4 wipe?
Intratech said:
*2767*3855#
Click to expand...
Click to collapse
Then flash with .pit (repartition) ? Can't think of anything "cleaner" than that.
Ok heres what i did.
First On 2.3.6 KL1 i presume. Rooted my phone using CF ROOT
http://forum.xda-developers.com/showthread.php?t=1103399
Then Installed F1 Galaxy Nexus ROM
http://forum.xda-developers.com/showthread.php?t=1601518
Then tried to dual boot (Greedy me!)
The other ROM i thought of was Resurrection ROM..
Then i installed it. Using this guide
http://forum.xda-developers.com/showpost.php?p=24233085&postcount=2
So the next time i installed Siyah 3.2b5 My phone didn't boot after The initial S2 logo.
So I then flashed a new ROM KL8 from Odin
Its working fine.
But am not able to install any other ROM.
Any idea what might be the issue?
Thanks in Advance
arunreturns said:
Ok heres what i did.
First On 2.3.6 KL1 i presume. Rooted my phone using CF ROOT
http://forum.xda-developers.com/showthread.php?t=1103399
Then Installed F1 Galaxy Nexus ROM
http://forum.xda-developers.com/showthread.php?t=1601518
Then tried to dual boot (Greedy me!)
The other ROM i thought of was Resurrection ROM..
Then i installed it. Using this guide
http://forum.xda-developers.com/showpost.php?p=24233085&postcount=2
So the next time i installed Siyah 3.2b5 My phone didn't boot after The initial S2 logo.
So I then flashed a new ROM KL8 from Odin
Its working fine.
But am not able to install any other ROM.
Any idea what might be the issue?
Thanks in Advance
Click to expand...
Click to collapse
the KL8 rom u installed from odin is it a stock firmware if yes then u have lost root privealage hence u have 2 root it once agian using a cf root kernel
then only u can install any other roms
Did Root once again (Sorry For not mentioning)
Sun90 said:
the KL8 rom u installed from odin is it a stock firmware if yes then u have lost root privealage hence u have 2 root it once agian using a cf root kernel
then only u can install any other roms
Click to expand...
Click to collapse
Yeah i did root using CF Root. Hence i got CWM from which i did wipe data, wipe cache and then Installed zip from sdcard. (F1 galaxy nexus from Faryaab) It got installed. Then again stuck at the boot logo. Dont see the boot animation
Try formatting system partition and get the file again, might be corrupt download
Sent from my GT-I9100 using Tapatalk 2
Tried it no go
atifsh said:
Try formatting system partition and get the file again, might be corrupt download
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hi..
I did what you told me to. Still get the same boot logo
Guess my phone is done for R.I.P
Don't think so phone is rip, download the file again, or try some other ROM
If I were you I do this
formatting system, cache, data and after that flash stock GB using Odin.
Sent from my GT-I9100 using Tapatalk 2
What intrigues me is that, If i use KL8 alone (which is flashed via odin) Am able to use the mobile. use it well actually
But if i try to use any other ROM its stuck in the Boot logo
I tried LPQ from Intratech. Even that didnt work.
I thought this could be an issue with the kernel
(But i realised i was able to flash CF Root's kernel and move back to stock kernel so there would be no issue with regards to Kernel.)
Incorrect or Incomplete download wont be an issue i guess as I tried two to three ROMS.
Btw. I used this link
http://www.technetinfo.in/mobile/mobile-software/i9100xxkp8-android-403.html
I followed all the Instructions (Guess may be cause of the PIT file. I'm not sure cause ive seen in posts that we should not lay hands on PIT files)
So someone please help me out.
Will be ever so grateful
atifsh said:
Don't think so phone is rip, download the file again, or try some other ROM
If I were you I do this
formatting system, cache, data and after that flash stock GB using Odin.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
By formating system cache data you mean wipe options in CWM right. That i have done lotsa times. Can kernel failure cause these issues, as once i got Kernel panic mode error??
If you follow a link from another forum why not ask them its their instructions after all .
XDA says total wipe of the phone and start again.
and do not touch a PIT file ever .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery >>>> install CF root if no recovery first .
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Pick your custom rom and follow instructions .
jje
I think the problem was that you tried to dual boot with a 4.0.3 and a 4.0.4 ported ROM.As far as Im aware 4.0.3 is the supported ROM for dual boot with Siyah kernel.I personally wouldnt trust 4.0.4 dual boot yet.Do as posted above and you should be O.k.
Finally Issue solved
JJEgan said:
If you follow a link from another forum why not ask them its their instructions after all .
XDA says total wipe of the phone and start again.
and do not touch a PIT file ever .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery >>>> install CF root if no recovery first .
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Pick your custom rom and follow instructions .
jje
Click to expand...
Click to collapse
cooza said:
I think the problem was that you tried to dual boot with a 4.0.3 and a 4.0.4 ported ROM.As far as Im aware 4.0.3 is the supported ROM for dual boot with Siyah kernel.I personally wouldnt trust 4.0.4 dual boot yet.Do as posted above and you should be O.k.
Click to expand...
Click to collapse
Thank you for your help.
Issue has been solved. Now am able to Install F1 Galaxy Nexus ROM
I'm putting dual booting aside for now. Will stay on CM9 kernel itself
Thanks again for your help
Hey Guys
I came from Stock Rom, rooted my device and flash recovery. And when i come to install any custom rom my device get into a boot loop.
Fortunately I got a back up and every time a try a different custom rom and i can go back to stock.
Well i have tried with the following roms
CM10
AOKP
Slim Roms
Paranoid
Everytime i have tried any of these roms i do carefully everty step. Just exactly like the tutorial says. I've been done this before, installing custom rom in other device, like nexus s, gs3, gs2. Im familiar with those stuffs.
And i don´t think it has to do with some corrupted file when i download the base.
I have tried to reflash recovery and nothing.
Tried to change kernel, i changed to siyah and nothing. After i install custom rom , the device just show the logo of the rom and ask select language and bam!, there is the boop loop
I don´t know what else to do.
I have read something about clear nand with odin , but i dont see those options.
If anyone knows what to do, please let me know.
Thnks
Aditional Info:
Baseband: GT-I9300XXELLA
Kernel: Stock
Root with Odin3 v3.04 - CF-Auto-Root-m0-m0du-gti9300t.tar
International Version
4.1.2
Recovery 6.0.3.1
I Flash the Recovery with Rom Manager V5.5.2.3
You are wiping everything before you flash right?
wangdaning said:
You are wiping everything before you flash right?
Click to expand...
Click to collapse
Yes, i did all the wipes everytime. Reset factory, Dalvik and format system (in some cases). And nothing, still boot loop. :crying:
krizalvarez said:
Yes, i did all the wipes everytime. Reset factory, Dalvik and format system (in some cases). And nothing, still boot loop. :crying:
Click to expand...
Click to collapse
Only other suggestion is trying another recovery, I use Philz which can be flashed through odin. Oh, and did you fix permissions?
Ok im gonna try with another recovery. And yes i tried fix permissions.
I let you know what happen
Sent from my GalaxyS3 from xda-developers app
wangdaning said:
Only other suggestion is trying another recovery, I use Philz which can be flashed through odin. Oh, and did you fix permissions?
Click to expand...
Click to collapse
Today i tried with philz, cool recovery btw, but nothing. My device still stuck on boop loop after i install any custom rom
I have tried these option after i get the boop loop> wipe factory reset, wipe cache partition. And before install> wipes, fix permissions. But none of these options have help me.
Another suggestion?
What happens with stock odin flashed roms ??
jje
It boots normally, everything's fine with stock rom.
Sent from my GalaxyS3 from xda-developers app
krizalvarez said:
It boots normally, everything's fine with stock rom.
Sent from my GalaxyS3 from xda-developers app
Click to expand...
Click to collapse
That suggests a problem that is one of the following .
EXT SD card faulty
Custom rom download faulty
CWM recovery faulty.
user not following instructions .
Try flashing a Samsung Based custom rom .
jje
What do you mean boot loop is it actually restarting after boot and restating again ??
Yes. Exactly that's what i mean. It restart over and over again.
External sd card > i dont have one
Recovery > i tried with cwm and philz
Downloaded rom > i have tried download from the xda developer site and tried with different files, different roms
Im pretty sure i follow the instructions just the way it is
Sent from my GalaxyS3 from xda-developers app
Flash samsung based cwm rom .
http://forum.xda-developers.com/showthread.php?t=1868004
jje
JJEgan said:
Flash samsung based cwm rom .
http://forum.xda-developers.com/showthread.php?t=1868004
jje
Click to expand...
Click to collapse
Hey JJE, what the purpose to flash a Samsung Based Rom with CMW?
Do i have to install Odexed or Deodexed ?
Thnks for your comments
krizalvarez said:
Hey JJE, what the purpose to flash a Samsung Based Rom with CMW?
Do i have to install Odexed or Deodexed ?
Thnks for your comments
Click to expand...
Click to collapse
Do i have to install Odexed or Deodexed ?
Whatever you want .
Difference see Google.
https://www.google.co.uk/search?q=O...fficial&client=firefox-a&channel=np&source=hp
Hey jje, what is the purpose of flash a samsung based rom?
With this I understand that it will alow me to flash a custom rom after that, is that right?
Another question, how can i go back like all factory settings, i mean clear everything. I format internal sd, factory reset, do the wipes, fix permissions and once again try to install a custom rom but phone doesn't boot after show logo. Actually i install the same rom in another i9300 and everything's go fine, so the file is ok.
Sent from my GalaxyS3 from xda-developers app
Samsung-based ROM is a custom ROM based on the stock one.
Hello
i have galaxy S3 GT i9300 running on stock rom 4.3 , i tried to flash this rom
SmartDroid AOSP V45.0 (b82)
http://forum.xda-developers.com/galaxy-s3/development/myown-cm11-build-todays-git140125-t2624535
but i got stucked in boot loop i follow the instruction very well and tried many times but in vain
i returned back to stock again
any help to make this rom a try?
Thanx
elelamy said:
Hello
i have galaxy S3 GT i9300 running on stock rom 4.3 , i tried to flash this rom
SmartDroid AOSP V45.0 (b82)
http://forum.xda-developers.com/galaxy-s3/development/myown-cm11-build-todays-git140125-t2624535
but i got stucked in boot loop i follow the instruction very well and tried many times but in vain
i returned back to stock again
any help to make this rom a try?
Thanx
Click to expand...
Click to collapse
Install PhilZ recovery choose option in menu Wipe Data/Factory Reset then choose Clean to install a new rom this will wipe/format the correct files for you to flash your rom. (Make sure you have your rom on the ext sd card ready to flash! This will format your system partition so don't reboot untill you have immediately flashed the rom after wiping)..
Thanks fir your reply
I already did exactly like u said but the same result bootloop
Is there any rom or kernil to fkash before flashing this romSmartDroid AOSP V45.0?
elelamy said:
Thanks fir your reply
I already did exactly like u said but the same result bootloop
Is there any rom or kernil to fkash before flashing this romSmartDroid AOSP V45.0?
Click to expand...
Click to collapse
No.. nothing special to flash before installing.. Are you on latest PhilZ recovery?
Can you install other roms? ( To see if your phone will install other roms)
Have you tried factory resetting after flashing? (To clear any data issues that are causing a bootloop)
Have you tried downloading the rom again? ( could be a bad download)
Have you tried flashing the rom booting up the phone then flashing the gapps.
Also post the exact method that you are using to install..
tallman43 said:
No.. nothing special to flash before installing.. Are you on latest PhilZ recovery?
Can you install other roms? ( To see if your phone will install other roms)
Have you tried factory resetting after flashing? (To clear any data issues that are causing a bootloop)
Have you tried downloading the rom again? ( could be a bad download)
Have you tried flashing the rom booting up the phone then flashing the gapps.
Also post the exact method that you are using to install..
Click to expand...
Click to collapse
It's solved now by using the latest philz
Thanks for helping
Hello xda developers
I have an SGS2 (i9100), i tested many custom roms like cm13(official/unofficial), lineage 13(unofficial), resurrection remix(lollipop and marshmallow), aicp (marshmallow), aokp (marshmallow) and more... . the problem that my i9100 always entering to bootloop when i restart the phone or reboot by himself and the only solution is to make data/factory reset to gain access to my phone another time, after 3 or 4 days i should do the same process to remove this terrible bootloop, tested with another battery but no luck.
Please tell me what should i do to make my phone stabe? Is it software or hardware issue?
And thanks.
make clean install with all wipes with TWRP or zip flashable cleaner scripts
Abels2 said:
make clean install with all wipes with TWRP or zip flashable cleaner scripts
Click to expand...
Click to collapse
thanks for reply.
can you provide me flashable zip?
djamiirr said:
thanks for reply.
can you provide me flashable zip?
Click to expand...
Click to collapse
https://mega.nz/#F!gdxEFbzZ!b66K7QoVhWshwUV7L-mgHg
gs2ROMNuke
Abels2 said:
https://mega.nz/#F!gdxEFbzZ!b66K7QoVhWshwUV7L-mgHg
gs2ROMNuke
Click to expand...
Click to collapse
Thank you dude but the SGS2 is still in a bootloop cycle.
djamiirr said:
Thank you dude but the SGS2 is still in a bootloop cycle.
Click to expand...
Click to collapse
even after installing a system? return back to rom stock from 4.1.2
Rom:
https://www.mediafire.com/file/ds4xn2jv0exntvx/I9100XWMS3_I9100FOPLS6_FOP_PDA_PHONE_CSC.zip
Odin:
https://www.mediafire.com/file/py55qjre4i96li2/Odin_1.85.zip
chose PIT,PDA,PHONE and CSC and flash after this your phone return stock without bootloops but need root and install TWRP, easy way flash on normal recovery this zip:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
after this from the TWRP performs the necessary wipes and you can go to the preferred ROM
Abels2 said:
even after installing a system? return back to rom stock from 4.1.2
Rom:
https://www.mediafire.com/file/ds4xn2jv0exntvx/I9100XWMS3_I9100FOPLS6_FOP_PDA_PHONE_CSC.zip
Odin:
https://www.mediafire.com/file/py55qjre4i96li2/Odin_1.85.zip
chose PIT,PDA,PHONE and CSC and flash after this your phone return stock without bootloops but need root and install TWRP, easy way flash on normal recovery this zip:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
after this from the TWRP performs the necessary wipes and you can go to the preferred ROM
Click to expand...
Click to collapse
Thank you i will try this solution using my old stockrom (one .tar.md5 file) and a pit with 1GB System, 4GB Data and 512MB Preload .
i hope that will make a difference.
one more question:
can bad repartitioning cause this problem?
Abels2 said:
even after installing a system? return back to rom stock from 4.1.2
Rom:
https://www.mediafire.com/file/ds4xn2jv0exntvx/I9100XWMS3_I9100FOPLS6_FOP_PDA_PHONE_CSC.zip
Odin:
https://www.mediafire.com/file/py55qjre4i96li2/Odin_1.85.zip
chose PIT,PDA,PHONE and CSC and flash after this your phone return stock without bootloops but need root and install TWRP, easy way flash on normal recovery this zip:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
after this from the TWRP performs the necessary wipes and you can go to the preferred ROM
Click to expand...
Click to collapse
Sorry but no luck
bootlooping again
oh please is there no one can help me??