Hello
i have galaxy S3 GT i9300 running on stock rom 4.3 , i tried to flash this rom
SmartDroid AOSP V45.0 (b82)
http://forum.xda-developers.com/galaxy-s3/development/myown-cm11-build-todays-git140125-t2624535
but i got stucked in boot loop i follow the instruction very well and tried many times but in vain
i returned back to stock again
any help to make this rom a try?
Thanx
elelamy said:
Hello
i have galaxy S3 GT i9300 running on stock rom 4.3 , i tried to flash this rom
SmartDroid AOSP V45.0 (b82)
http://forum.xda-developers.com/galaxy-s3/development/myown-cm11-build-todays-git140125-t2624535
but i got stucked in boot loop i follow the instruction very well and tried many times but in vain
i returned back to stock again
any help to make this rom a try?
Thanx
Click to expand...
Click to collapse
Install PhilZ recovery choose option in menu Wipe Data/Factory Reset then choose Clean to install a new rom this will wipe/format the correct files for you to flash your rom. (Make sure you have your rom on the ext sd card ready to flash! This will format your system partition so don't reboot untill you have immediately flashed the rom after wiping)..
Thanks fir your reply
I already did exactly like u said but the same result bootloop
Is there any rom or kernil to fkash before flashing this romSmartDroid AOSP V45.0?
elelamy said:
Thanks fir your reply
I already did exactly like u said but the same result bootloop
Is there any rom or kernil to fkash before flashing this romSmartDroid AOSP V45.0?
Click to expand...
Click to collapse
No.. nothing special to flash before installing.. Are you on latest PhilZ recovery?
Can you install other roms? ( To see if your phone will install other roms)
Have you tried factory resetting after flashing? (To clear any data issues that are causing a bootloop)
Have you tried downloading the rom again? ( could be a bad download)
Have you tried flashing the rom booting up the phone then flashing the gapps.
Also post the exact method that you are using to install..
tallman43 said:
No.. nothing special to flash before installing.. Are you on latest PhilZ recovery?
Can you install other roms? ( To see if your phone will install other roms)
Have you tried factory resetting after flashing? (To clear any data issues that are causing a bootloop)
Have you tried downloading the rom again? ( could be a bad download)
Have you tried flashing the rom booting up the phone then flashing the gapps.
Also post the exact method that you are using to install..
Click to expand...
Click to collapse
It's solved now by using the latest philz
Thanks for helping
Related
Hi
Can a rooted phone be rerooted as in without unrooting? (i'll explain)
I rooted my boyfriend's phone over a year ago and therefore cannot remember what method I used. Per his request, I wanted to install a new rom however, I am getting a signature verification error. While looking for answers, most posts recommend disabling the signature BUT I do not have that option when i go into recovery. My only thought in fixing this is to place a root over the root lol
Any advice?
texaslittleangel said:
Hi
Can a rooted phone be rerooted as in without unrooting? (i'll explain)
I rooted my boyfriend's phone over a year ago and therefore cannot remember what method I used. Per his request, I wanted to install a new rom however, I am getting a signature verification error. While looking for answers, most posts recommend disabling the signature BUT I do not have that option when i go into recovery. My only thought in fixing this is to place a root over the root lol
Any advice?
Click to expand...
Click to collapse
Sounds like you dont have a custom kernel and instead are trying to flash a rom via stock kernel.
Just reboot into download mode and flash Siyah kernel in ODIN. Once its installed you can reboot into custom recovery and flash new rom. I would advise to wipe data/factory reset in custom kernel before or after installing new rom.
TheATHEiST said:
Sounds like you dont have a custom kernel and instead are trying to flash a rom via stock kernel.
Just reboot into download mode and flash Siyah kernel in ODIN. Once its installed you can reboot into custom recovery and flash new rom. I would advise to wipe data/factory reset in custom kernel before or after installing new rom.
Click to expand...
Click to collapse
Can you please point me in the right direction on how to do this? It is the first time I run into a problem such as this one in 4 phones i've had
Which one from this list?
Is booting into custom the same as the normal Recovery boot?
texaslittleangel said:
Can you please point me in the right direction on how to do this? It is the first time I run into a problem such as this one in 4 phones i've had
Which one from this list?
Is booting into custom the same as the normal Recovery boot?
Click to expand...
Click to collapse
It depends on which firmware is now installed on his phone, which version of Siyah can be installed.
No, CWM Recovery isn't the same as stock Recovery. To flash a new rom you should have CWM Recovery, as you will have when you've flashed Siyah.
About the flashing itself: just search for rooting and flashing guides, here on xda or google. There are plenty of them.
Good luck.
Sent from the Matrix
TheATHEiST said:
Just reboot into download mode and flash Siyah kernel in ODIN. Once its installed you can reboot into custom recovery and flash new rom. I would advise to wipe data/factory reset in custom kernel before or after installing new rom.
Click to expand...
Click to collapse
I am now in ODIN 3 and have managed to boot into download mode. My question now is in ODIN where do I add the SiyahKernel S2-v4.1.5 (i went with the first version they have) where do I add it: bootloader, pda, phone or csc?
EDIT: PDA. <
Did exactly what Athiest suggested but now some purple yin yangish logo appears while turning on but nothing after, just a black screen
you have a bootloop.
go into cwm recovery clean cache and the advance clean dalvik cache and reboot, that might fix the problem.
SOLVED
Cosmic Blue said:
you have a bootloop.
go into cwm recovery clean cache and the advance clean dalvik cache and reboot, that might fix the problem.
Click to expand...
Click to collapse
VOILA!!!!! Genius, worked like a charm. I am out of the dog house lol
Hey Guys
I came from Stock Rom, rooted my device and flash recovery. And when i come to install any custom rom my device get into a boot loop.
Fortunately I got a back up and every time a try a different custom rom and i can go back to stock.
Well i have tried with the following roms
CM10
AOKP
Slim Roms
Paranoid
Everytime i have tried any of these roms i do carefully everty step. Just exactly like the tutorial says. I've been done this before, installing custom rom in other device, like nexus s, gs3, gs2. Im familiar with those stuffs.
And i don´t think it has to do with some corrupted file when i download the base.
I have tried to reflash recovery and nothing.
Tried to change kernel, i changed to siyah and nothing. After i install custom rom , the device just show the logo of the rom and ask select language and bam!, there is the boop loop
I don´t know what else to do.
I have read something about clear nand with odin , but i dont see those options.
If anyone knows what to do, please let me know.
Thnks
Aditional Info:
Baseband: GT-I9300XXELLA
Kernel: Stock
Root with Odin3 v3.04 - CF-Auto-Root-m0-m0du-gti9300t.tar
International Version
4.1.2
Recovery 6.0.3.1
I Flash the Recovery with Rom Manager V5.5.2.3
You are wiping everything before you flash right?
wangdaning said:
You are wiping everything before you flash right?
Click to expand...
Click to collapse
Yes, i did all the wipes everytime. Reset factory, Dalvik and format system (in some cases). And nothing, still boot loop. :crying:
krizalvarez said:
Yes, i did all the wipes everytime. Reset factory, Dalvik and format system (in some cases). And nothing, still boot loop. :crying:
Click to expand...
Click to collapse
Only other suggestion is trying another recovery, I use Philz which can be flashed through odin. Oh, and did you fix permissions?
Ok im gonna try with another recovery. And yes i tried fix permissions.
I let you know what happen
Sent from my GalaxyS3 from xda-developers app
wangdaning said:
Only other suggestion is trying another recovery, I use Philz which can be flashed through odin. Oh, and did you fix permissions?
Click to expand...
Click to collapse
Today i tried with philz, cool recovery btw, but nothing. My device still stuck on boop loop after i install any custom rom
I have tried these option after i get the boop loop> wipe factory reset, wipe cache partition. And before install> wipes, fix permissions. But none of these options have help me.
Another suggestion?
What happens with stock odin flashed roms ??
jje
It boots normally, everything's fine with stock rom.
Sent from my GalaxyS3 from xda-developers app
krizalvarez said:
It boots normally, everything's fine with stock rom.
Sent from my GalaxyS3 from xda-developers app
Click to expand...
Click to collapse
That suggests a problem that is one of the following .
EXT SD card faulty
Custom rom download faulty
CWM recovery faulty.
user not following instructions .
Try flashing a Samsung Based custom rom .
jje
What do you mean boot loop is it actually restarting after boot and restating again ??
Yes. Exactly that's what i mean. It restart over and over again.
External sd card > i dont have one
Recovery > i tried with cwm and philz
Downloaded rom > i have tried download from the xda developer site and tried with different files, different roms
Im pretty sure i follow the instructions just the way it is
Sent from my GalaxyS3 from xda-developers app
Flash samsung based cwm rom .
http://forum.xda-developers.com/showthread.php?t=1868004
jje
JJEgan said:
Flash samsung based cwm rom .
http://forum.xda-developers.com/showthread.php?t=1868004
jje
Click to expand...
Click to collapse
Hey JJE, what the purpose to flash a Samsung Based Rom with CMW?
Do i have to install Odexed or Deodexed ?
Thnks for your comments
krizalvarez said:
Hey JJE, what the purpose to flash a Samsung Based Rom with CMW?
Do i have to install Odexed or Deodexed ?
Thnks for your comments
Click to expand...
Click to collapse
Do i have to install Odexed or Deodexed ?
Whatever you want .
Difference see Google.
https://www.google.co.uk/search?q=O...fficial&client=firefox-a&channel=np&source=hp
Hey jje, what is the purpose of flash a samsung based rom?
With this I understand that it will alow me to flash a custom rom after that, is that right?
Another question, how can i go back like all factory settings, i mean clear everything. I format internal sd, factory reset, do the wipes, fix permissions and once again try to install a custom rom but phone doesn't boot after show logo. Actually i install the same rom in another i9300 and everything's go fine, so the file is ok.
Sent from my GalaxyS3 from xda-developers app
Samsung-based ROM is a custom ROM based on the stock one.
Hey guys, I was on temaseks kitkat ROM on v12, I decided to download and flash his new v16 version. I tried to flash it but I got an error saying "some changes failed Error in /sdcard/0/download/cm-11-20131206 Status 7 installation aborted.When I try to reboot my phone it asks to fix my phone root, but when I click yes or no my phone just comes back to cwm. I dont have a sd card, i've tried a factory reset but still no luck
Please help me, I really need to use my phone Thanks
Standard replies to this question .
In recovery format sdcard system data cache .
Boot to download mode flash stock rom .
Or flash stock rom via Odin .
JJEgan said:
Standard replies to this question .
In recovery format sdcard system data cache .
Boot to download mode flash stock rom .
Or flash stock rom via Odin .
Click to expand...
Click to collapse
I managed to flash a stock rom, then flashed cm11 again, but now i'm getting no signal. can you send me a link for the correct modem please?
kLN93 said:
I managed to flash a stock rom, then flashed cm11 again, but now i'm getting no signal. can you send me a link for the correct modem please?
Click to expand...
Click to collapse
I think your system is formatted and there is no OS because of the aborted installtion. I had Status 7 error yesterday because my CWM recovery was outdated. Use latest TWRP from teamw.in and install any rom by copying them in yor sdcard. This should do it.
Hey guys,
I am trying to flash CM 11 M8 on my i9300 but I get stuck on the bootloader screen.
This is how it looks:
http : //i . imgur . com/qJAqYf2 . jpg
The only ROM that I could flash on this device is [Resurrection Edition] CheckROM EvoHD™ V4 [ODIN ROM] http : //tinyurl . com/mothcldto
It will boot but it's a 4.0.4 ROM and somehow can't be updated.
I'd prefer to install CM or at least the latest stock firmware.
Not even the stock ROM (I9300XXUGND2; Downloaded from samsung-updates.com) would boot.
Can anyone help me?
Recovery: CWM 6.0.4.3
Sorry for the messed up links. This is my first post, so I am not allowed to post links.
Ok so I have successfully flashed Stock ICS ROM over Odin and CM 9 over PhilZ Recovery.
For some reason I am not able to install JellyBean/KitKat ROMs.
I hope this Information helps.
DonSimon13 said:
Ok so I have successfully flashed Stock ICS ROM over Odin and CM 9 over PhilZ Recovery.
For some reason I am not able to install JellyBean/KitKat ROMs.
I hope this Information helps.
Click to expand...
Click to collapse
Strange are you doing a full wipe Formating system + Data + Cache+ Delvik also are you using the latest recovery?
tallman43 said:
Strange are you doing a full wipe Formating system + Data + Cache+ Delvik also are you using the latest recovery?
Click to expand...
Click to collapse
I am using PhilZ Touch 6.48.4 and wiped everything. The latest CM Milestone doesn't boot. I think this might be a bootloader related problem, but I'm not sure.
I also tried installing Stock ICS Rom, but when I try to do an OTA update the resgistration of the device fails.
EDIT: If I try to read my IMEI it says "null / null". I guess that isn't good.
Hello xda developers
I have an SGS2 (i9100), i tested many custom roms like cm13(official/unofficial), lineage 13(unofficial), resurrection remix(lollipop and marshmallow), aicp (marshmallow), aokp (marshmallow) and more... . the problem that my i9100 always entering to bootloop when i restart the phone or reboot by himself and the only solution is to make data/factory reset to gain access to my phone another time, after 3 or 4 days i should do the same process to remove this terrible bootloop, tested with another battery but no luck.
Please tell me what should i do to make my phone stabe? Is it software or hardware issue?
And thanks.
make clean install with all wipes with TWRP or zip flashable cleaner scripts
Abels2 said:
make clean install with all wipes with TWRP or zip flashable cleaner scripts
Click to expand...
Click to collapse
thanks for reply.
can you provide me flashable zip?
djamiirr said:
thanks for reply.
can you provide me flashable zip?
Click to expand...
Click to collapse
https://mega.nz/#F!gdxEFbzZ!b66K7QoVhWshwUV7L-mgHg
gs2ROMNuke
Abels2 said:
https://mega.nz/#F!gdxEFbzZ!b66K7QoVhWshwUV7L-mgHg
gs2ROMNuke
Click to expand...
Click to collapse
Thank you dude but the SGS2 is still in a bootloop cycle.
djamiirr said:
Thank you dude but the SGS2 is still in a bootloop cycle.
Click to expand...
Click to collapse
even after installing a system? return back to rom stock from 4.1.2
Rom:
https://www.mediafire.com/file/ds4xn2jv0exntvx/I9100XWMS3_I9100FOPLS6_FOP_PDA_PHONE_CSC.zip
Odin:
https://www.mediafire.com/file/py55qjre4i96li2/Odin_1.85.zip
chose PIT,PDA,PHONE and CSC and flash after this your phone return stock without bootloops but need root and install TWRP, easy way flash on normal recovery this zip:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
after this from the TWRP performs the necessary wipes and you can go to the preferred ROM
Abels2 said:
even after installing a system? return back to rom stock from 4.1.2
Rom:
https://www.mediafire.com/file/ds4xn2jv0exntvx/I9100XWMS3_I9100FOPLS6_FOP_PDA_PHONE_CSC.zip
Odin:
https://www.mediafire.com/file/py55qjre4i96li2/Odin_1.85.zip
chose PIT,PDA,PHONE and CSC and flash after this your phone return stock without bootloops but need root and install TWRP, easy way flash on normal recovery this zip:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
after this from the TWRP performs the necessary wipes and you can go to the preferred ROM
Click to expand...
Click to collapse
Thank you i will try this solution using my old stockrom (one .tar.md5 file) and a pit with 1GB System, 4GB Data and 512MB Preload .
i hope that will make a difference.
one more question:
can bad repartitioning cause this problem?
Abels2 said:
even after installing a system? return back to rom stock from 4.1.2
Rom:
https://www.mediafire.com/file/ds4xn2jv0exntvx/I9100XWMS3_I9100FOPLS6_FOP_PDA_PHONE_CSC.zip
Odin:
https://www.mediafire.com/file/py55qjre4i96li2/Odin_1.85.zip
chose PIT,PDA,PHONE and CSC and flash after this your phone return stock without bootloops but need root and install TWRP, easy way flash on normal recovery this zip:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
after this from the TWRP performs the necessary wipes and you can go to the preferred ROM
Click to expand...
Click to collapse
Sorry but no luck
bootlooping again
oh please is there no one can help me??