Hi ! , sorry for being a NOOB !
but .. when i try to install gummy nex on my samsung galaxy nexus , the following error appears ..
assert failed: getprop("ro.product.device") == "Maguro" l l getprop
E:Error in /sdcard/GummyNexGSM0.7.6.zip
(Status 7)
Installation aborted
what the hell should i do ?
thx guyz for you answers !
Related
I have had my hero rooted for a while nd flashed 3 or 4 ROMS to it. It is currently s-off with CM 6.1. I downloaded 3 different gingerbread ROMS and each time I get the error:
assert failed: getprop("ro.product.device") == "hero" || getprop ("ro.buE:unknown command [ild.product")]
E:Error in /sdcard/<romname>.zip
(Status 7)
Thanks
Extra info:
I have HBOOT- 1.47.0000 (HERO20000) and my recovery panel is Build : RA-heroc-v1.5.2
Sprint CDMA
Solved: I am in the wrong section and the ROMs are for the GSM phones. Status 7 appears to be the error you get trying to load a ROM not made for your phone.
Hi All,
I am getting a status 7 error whwn I try to install any version of Cyanogenmod ROM on my device. The error log is as follows:
Installing: /sdcard/cm-10.0.0-i9100g.zip
Finding update package...
I:Update location: /sdcard/cm-10.0.0-i9100g.zip
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "i9100g" || getprop("ro.build.product") == "i9100g" ||
getprop("ro.product.device") == "GT-I9100G" || getprop("ro.build.product") == "GT-I9100G"
assert failed: getprop("ro.product.device") == "i9100g" || getprop("ro.build.product") == "i9100g" || getprop("ro.product.device") == "GT-I9100G" || getprop("ro.build.product") == "GT-I9100G"
E:Error in /sdcard/cm-10.0.0-i9100g.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/cm-10.0.0-i9100g.zip")
I have tried different versions of CM ROMs like CM9, CM10 (for which I got the above error) and CM10.1 (monthly build)
The details of my phone are as follows:
Model: GT-I9100G
Android Version: 4.0.4
Baseband Version: I9100GDDLP7
Kernel Version: 3.0.8-I9100G-v1.0.2 [email protected] #3
Build Number: IMM76D.XXLPZ
I Googled to troubleshoot this problem but could not find anything. Please let me know a solution this problem.
Thanks in advance
Mudit
Flash a different kernel and try again.
Can you suggest a good ICS kernel for GT-I9100G? Basically, most of the kernels I am able to find are for gingerbread. There are certain versions which are for ICS but I have already faced problems with a kernel which in some forum was written to be for ICS but actually was for GB and I was able to get my phone running again only after replacing that kernel with my current kernel.
This is my first time rooting my phone and I really want to get this right
Hello,
I was trying to install the Paranoid Android ROM (http://forum.xda-developers.com/showthread.php?t=2203301).
I did everything as always but unfortunately I receive an error:
Code:
CWM-based Recovery v.5.5.0.4 :: CF-v.1.5
-- Installing: /sdcard/pa_i9053-3.15-23MAR2013-gokussjx.zip
Finding update package...
Opening update package...
[COLOR="DarkRed"]Installing update...
assert failed: getprop("ro.product.device") == "m3" || getprop("ro.built.product") == "m3" ||
getprop("ro.product.device") == "i9305" || getprop("ro.built.product") == "i9305" ||
getprop("ro.product.device") == "GT-I9305" || getprop("ro.built.product") == "GT-I9305"
E:Error in /sdcard/pa_i9053-3.15-23MAR2013-gokussjx.zip
(Status 7)
Installation aborted[/COLOR]
Im not a software developer for mobile phones but I guess it is trying to tell me, that the ROM which I'm trying to install isnt working on my device.
But I am absolutely sure that I got an I9305 as you can see on the attached screenshot.
Any ideas?
I9305 Q&A forum this is I9300 .
But suspect a faulty download judged on your information .
INSTRUCTIONS,
1. UPDATE RECOVERY
2. FACTORY RESET
3. INSTALL ROM, GAPPS
4. WIPE CACHE & DALVIK CACHE
5. REBOOT
PA 3+ UPDATES DO NOT NEED A FACTORY RESET,
BUT YOU NEED TO INSTALL GAPPS ASWELL.
JJEgan said:
I9305 Q&A forum this is I9300 .
But suspect a faulty download judged on your information .
Click to expand...
Click to collapse
Sorry... my mistake.
This thread can be closed after I have already reopened it in the correct forum (http://forum.xda-developers.com/showthread.php?p=39743752#post39743752).
Thank you.
Hi, im using clockworkmod recowery v5.,but still i am unable to update my samsung galaxy ace duos gt-s6802 with the Downloaded update file cm-10.1-20121231-UNOFFICIAL-cooper.zip
the following is the error encountered, please help me by providing the solution to enable me update my Galaxy Ace Duos- GT-S6802 from Adnroid 2.36 to jelly bean 4.2
installing update... assert failed: getprop("ro.product.device") == "cooper" II getprop("ro.build.product") == "cooper" II getprop("ro.product.board") == "cooper" II getprop("ro.product.device") == "GT-S5830" II getprop("ro.product.board") == ""GT-S5830" E:Error in /sdcard/update-cm-10.1-20121231-UNOFFICIAL-cooper.zip (Status 7) installation aborted.
bandish said:
Hi, im using clockworkmod recowery v5.,but still i am unable to update my samsung galaxy ace duos gt-s6802 with the Downloaded update file cm-10.1-20121231-UNOFFICIAL-cooper.zip
the following is the error encountered, please help me by providing the solution to enable me update my Galaxy Ace Duos- GT-S6802 from Adnroid 2.36 to jelly bean 4.2
installing update... assert failed: getprop("ro.product.device") == "cooper" II getprop("ro.build.product") == "cooper" II getprop("ro.product.board") == "cooper" II getprop("ro.product.device") == "GT-S5830" II getprop("ro.product.board") == ""GT-S5830" E:Error in /sdcard/update-cm-10.1-20121231-UNOFFICIAL-cooper.zip (Status 7) installation aborted.
Click to expand...
Click to collapse
This rom is for
Galaxy Ace GT-S5830
Click to expand...
Click to collapse
, this will not work on
Galaxy Ace Duos Gt-S6802
Click to expand...
Click to collapse
...
Need of Samsung Galaxy Ace s6802 custom ROM
I also in need of this custom ROM, please help,
Riju95 said:
This rom is for , this will not work on ...
Click to expand...
Click to collapse
EDIT: I was able to get the GSM version of CM to install. I'm not sure why my ATT One is not the att version but oh well.
Hello,
I just got my HTC One and I'm running into a problem trying to install cm-10.1.3-m7att.zip from recovery. When I try to install I get the following:
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "m7" ll getprop("ro.build.product") == "m7" ll
getprop("ro.product.device") == "m7att" ll getprop("ro.build.product") == "m7att"
E: Error in /data/media/CyanogenMod/cm-10.1.3-m7att.zip
(Status 7)
Installation aborted.
Any guidance would be appreciated. I'm going to try other builds now but wanted to get this out to see if someone had an idea as to what I can do to solve this. Any ideas? Thanks in advance!
-B
Edit the updater-script and remove the getprop lines.
Sent from my One using XDA Premium 4 mobile app