Related
Yesterday I wanted to re-flash my ROM (did that about 4 times before without complication) because of a random wifi bug. All things did quite fine , i wiped data/system/cache/dalvik-chache/sd-ext but after i said install .zip from sd, there was the error - lavine.
Log:
-- Installing: /sdcard/update.zip
Finding update package...
Openning update packge...
Installing update...
assert failed: getprop("ro.product.device") == "ST18i" || getprop("ro.build.product") == "ST18i" || getprop("ro.product.board") == "ST18i" || getprop("ro.product.device") == "ST18a" || getprop("ro.build.product") == "ST18a" || getprop("ro.product.board") == "ST18a" || getprop("ro.product.device") == "urushi" || getprop("ro.build.product") == "urushi" || getprop("ro.product.board") == "urushi"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
What am i using:
-Sony Ericcson Xperia ray (rooted)
-FreeXperia boot.img (worked the last 4 times)
-official CM7 build for ST18i (worked last 4 times)
i even reflashed the boot.img twice, but nothing changed.
I cant even access Android because i formatted the whole device + sdcard
What am i doing wrong and what can i do now?
Please help me as fast as possible (I need my goddamn phone >.<)
Greetings
~Jay
Really don't know if that helps but once I got exactly the same error. The reason was that the file system of my SD-card was corrupted somehow. Formatting the card several times via PC didn't help. There was the same error message. Finally the solution was to flash stock firmware via Flashtool and format the card from the phone menu afterwards. After that everything worked like expected. I even don't know how the file system got corrupted but the card itself seems to be OK.
Nope. it did not work. Ain't able to flash it with flashtool even after driver updates because falshtool doesn't recognize my phone. Blargh >.<
EDIT: Okay, got Flashtool working now. Have flashed original ROM, currently backing up all things and then trying to flash CM7 or MIUI again
EDIT2: Formatted, reflashing now
EDIT3: Working again! Thank you very much!!! All i need to do now is running titanum backup all over it :3
Hi,
To install Cyanogenmod ROM in my SEXperia Neo, Install boot.img from cm-7.2.0-hallon.zip package and copy the same zip file to SDCard.
After rebooting i start it in bootable mod and does followings:
Wipe data/factory reset
Wipe cache partition
Wipe Dalvik Cache
And then i select "install zip from sdcard" and choose "cm-7.2.0-hallon.zip".
But later i got following message.
CWM-based Recovery v5.0.2.8
--Installing: /sdcard/cm-7.2.0-hallon.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "MT15i" ||
getprop("ro.build.product") == "MT15i" ||
getprop("ro.product.board") == "MT15i" ||
getprop("ro.product.device") == "MT15a" ||
getprop("ro.build.product") == "MT15a" ||
getprop("ro.product.board") == "MT15a" ||
getprop("ro.product.device") == "hallon" ||
getprop("ro.build.product") == "hallon" ||
getprop("ro.product.board") == "hallon" ||
E:Error in /sdcard/cm-7.2.0-hallon.zip (Status 7)
Installation aborted.
I done some research but its doesn't work.
"I found the fix.
if you unzip the zip you downloaded
go into META-INF\com\google\android\
replace your updater-script with the updater-script found in updater-script.zip
RE- ZIP the folders (should have META-INF, system, and boot.img)
Open Recovery and flash should work"
And right now my phone is dead.
Please help me in this issue.
Thanks in advance.
buntu88 said:
Hi,
To install Cyanogenmod ROM in my SEXperia Neo, Install boot.img from cm-7.2.0-hallon.zip package and copy the same zip file to SDCard.
After rebooting i start it in bootable mod and does followings:
Wipe data/factory reset
Wipe cache partition
Wipe Dalvik Cache
And then i select "install zip from sdcard" and choose "cm-7.2.0-hallon.zip".
But later i got following message.
CWM-based Recovery v5.0.2.8
--Installing: /sdcard/cm-7.2.0-hallon.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "MT15i" ||
getprop("ro.build.product") == "MT15i" ||
getprop("ro.product.board") == "MT15i" ||
getprop("ro.product.device") == "MT15a" ||
getprop("ro.build.product") == "MT15a" ||
getprop("ro.product.board") == "MT15a" ||
getprop("ro.product.device") == "hallon" ||
getprop("ro.build.product") == "hallon" ||
getprop("ro.product.board") == "hallon" ||
E:Error in /sdcard/cm-7.2.0-hallon.zip (Status 7)
Installation aborted.
I done some research but its doesn't work.
"I found the fix.
if you unzip the zip you downloaded
go into META-INF\com\google\android\
replace your updater-script with the updater-script found in updater-script.zip
RE- ZIP the folders (should have META-INF, system, and boot.img)
Open Recovery and flash should work"
And right now my phone is dead.
Please help me in this issue.
Thanks in advance.
Click to expand...
Click to collapse
Dead Means what kind of dead? Can u enter fastboot mod.if yes then download any customized stock GB ROM for Neo from xda.flash them through flashtool to boot ur phone.
koushikjgec said:
Dead Means what kind of dead? Can u enter fastboot mod.if yes then download any customized stock GB ROM for Neo from xda.flash them through flashtool to boot ur phone.
Click to expand...
Click to collapse
Thanks for your time.
Dead means i can enter into fastboot mod and can install boot.img into it, but when i reboot it in recovery mod and try to install by selecting "install zip from sdcard" and choose "cm-7.2.0-hallon.zip", it gives intallation abort error.
And flashtool always asks for connecting NEO in USB debugging mode. But i can't do it because i dont have installed ROM in NEO.
Flash the stock ics rom again and after that flash cm7....it should work..or if you have a nandroid backup restore it
Sent from my MT11i using xda app-developers app
At least that is what i did when i ve got that error..and it worked
Sent from my MT11i using xda app-developers app
Sony Software Update Service
buntu88 said:
Thanks for your time.
Dead means i can enter into fastboot mod and can install boot.img into it, but when i reboot it in recovery mod and try to install by selecting "install zip from sdcard" and choose "cm-7.2.0-hallon.zip", it gives intallation abort error.
And flashtool always asks for connecting NEO in USB debugging mode. But i can't do it because i dont have installed ROM in NEO.
Click to expand...
Click to collapse
Have u tried Sony Official Software Update Service.Download from http://www.sonymobile.com/global-en/tools/update-service/.Install and run it,follow on screen instructions.see if it can help.though u will be unrooted after updating to official software.
"Sexperia" hahaaa....it a good word
Sent from my MT15i using Tapatalk 2
assert failed status 7
hi,
getting the same error while installing CM9 stable release.
ro.build.product = MT11i
ro.build.product = MT11a
problem with zip
(status 7)
Installation aborted.
I have a neo V MT11i
bombayboy said:
hi,
getting the same error while installing CM9 stable release.
ro.build.product = MT11i
ro.build.product = MT11a
problem with zip
(status 7)
Installation aborted.
I have a neo V MT11i
Click to expand...
Click to collapse
same here. installing over ICS 4.1.B.0.431
Working method:
Simply flash an official ROM (.ftf) with Flashtool in Flashmode mode;
Flash a correct Kernel (extract it from Cyanogen rom zip, boot.img usually) with Flashtool in Fastboot mode;
Enter recovery CMW;
Perform a full wipe factory reset, and cache wipe nextly;
Finish with applying custom ROM by CWM;
Done.
Can anyone help PLEASE.
I am new to flashing custom ROMS and am having problem flashing this one FXP133 CM10.
The one given here: http://forum.xda-developers.com/showthread.php?t=1780329
I get following error while Flashing:
Code:
-- Installing: /sdcard/FXP133-cm-10-20120813-haida.zip
Finding update package...
I:Update location: /sdcard/FXP133-cm-10-20120813-haida.zip
Opening update package...
Installing update...
script aborted:
assert failed: getprop("ro.product.device") == "MT11i" || getprop
("ro.build.product") == "MT11i" || getprop("ro.product.device") ==
"MT11a" || getprop("ro.build.product") == "MT11a" || getprop
("ro.product.device") == "haida" || getprop("ro.build.product") == "haida"
E:Error in /sdcard/FXP133-cm-10-20120813-haida.zip
(Status 7)
Installation aborted.
When on .42 (GB) stock firmware and Using MT11i NeoV.
In the Dev Thread I got following 2 replies:
dugzino said:
The thing is I did no clean install, simply overwrited 133 one. And now, I'm even more sure about it, in 134 you can feel the butter project!
First install the recommended Baseband (= .72) then flash the kernel then ROM then GApps then data wipe and you're good to go.
If you still don't know, there are lots of tutorials on how to flash ROMs. Just search
Click to expand...
Click to collapse
AND
music.soul said:
Firstly you need to have ICS with baseband .72
if you get the same error ... then open the rom with any archieve ... open up updater-script in meta-inf folder ... delete the lines till ...
Code:
("ro.product.device") == "haida" || getprop("ro.build.product") == "haida"
and save it ... flash it again done!
Click to expand...
Click to collapse
I tried both of them but still with no luck.
Now I am on ICS 4.0.4 with Baseband (.72) and have changed the updater-script and removed the lines (as suggested there) till.....
Code:
("ro.product.device") == "haida" || getprop("ro.build.product") == "haida"
But Now I am getting following error while flashing:
Code:
-- Installing: /sdcard/FXP133-cm-10-20120813-haida.zip
Finding update package...
I:Update location: /sdcard/FXP133-cm-10-20120813-haida.zip
Opening update package...
Installing update...
(Status 7)
Installation aborted.
PLEASE tell me what am i doing wrong. I want to have JB. PLEASE HELP.
Thanks in advance.
Answer these questions:
1. Are you using A Hallon (a.k.a. Xperia Neo) or a Haida (a.k.a. Neo V)
2. Did you download the correct zip corresponding to your phone (Hallon/Haida)
3. In a previous ROM, was your phone listed as what it was not? (a.k.a. You're using a Hallon, but it is written as Haida)
If you answered yes to the third question, then you need to reflash the stock ftf file. THEN flash the custom ROM. Pm me for more help
Jass5991 said:
Answer these questions:
1. Are you using A Hallon (a.k.a. Xperia Neo) or a Haida (a.k.a. Neo V)
2. Did you download the correct zip corresponding to your phone (Hallon/Haida)
3. In a previous ROM, was your phone listed as what it was not? (a.k.a. You're using a Hallon, but it is written as Haida)
If you answered yes to the third question, then you need to reflash the stock ftf file. THEN flash the custom ROM. Pm me for more help
Click to expand...
Click to collapse
1. Haida. i.e. (Neo V or MT11i).
2. Yes from here (http://code.google.com/p/freexperia/wiki/CyanogenMod10 THE FXP133 one)
3. Actually I could not understand this question. By the way currently I am on ICS 4.0.4 stock firmware with Base-band (=.72).
This is what I see in my about phone (Attached Image below).
Thanks again for the support. :good:
khurram.khu said:
Can anyone help PLEASE.
I am new to flashing custom ROMS and am having problem flashing this one FXP133 CM10.
The one given here: http://forum.xda-developers.com/showthread.php?t=1780329
I get following error while Flashing:
Code:
-- Installing: /sdcard/FXP133-cm-10-20120813-haida.zip
Finding update package...
I:Update location: /sdcard/FXP133-cm-10-20120813-haida.zip
Opening update package...
Installing update...
script aborted:
assert failed: getprop("ro.product.device") == "MT11i" || getprop
("ro.build.product") == "MT11i" || getprop("ro.product.device") ==
"MT11a" || getprop("ro.build.product") == "MT11a" || getprop
("ro.product.device") == "haida" || getprop("ro.build.product") == "haida"
E:Error in /sdcard/FXP133-cm-10-20120813-haida.zip
(Status 7)
Installation aborted.
When on .42 (GB) stock firmware and Using MT11i NeoV.
In the Dev Thread I got following 2 replies:
AND
I tried both of them but still with no luck.
Now I am on ICS 4.0.4 with Baseband (.72) and have changed the updater-script and removed the lines (as suggested there) till.....
Code:
("ro.product.device") == "haida" || getprop("ro.build.product") == "haida"
But Now I am getting following error while flashing:
Code:
-- Installing: /sdcard/FXP133-cm-10-20120813-haida.zip
Finding update package...
I:Update location: /sdcard/FXP133-cm-10-20120813-haida.zip
Opening update package...
Installing update...
(Status 7)
Installation aborted.
PLEASE tell me what am i doing wrong. I want to have JB. PLEASE HELP.
Thanks in advance.
Click to expand...
Click to collapse
Dud u flash the kernel first? Through fastboot! Use the boot.img from the zip! Then flash the main zip! Then wipe data, catche, dalvik catche! Reboot!
Should work if u have the right file for your phone!
Sent from My Xperia NeoV! Don't be a retard! Press the thanks button!
Alright. This build.prop error is easily fixed. First, flash a stock ROM. Then flash the kernel for the new rom in fastboot mode. Finally, flash the new rom through recovery. Flashing finished!
Don't forget wipe everything, including battery stats
Jass5991 said:
Alright. This build.prop error is easily fixed. First, flash a stock ROM. Then flash the kernel for the new rom in fastboot mode. Finally, flash the new rom through recovery. Flashing finished!
Don't forget wipe everything, including battery stats
Click to expand...
Click to collapse
Great! But battery stats are not necessary to wipe! Dalvik is!
Sent from My Xperia NeoV! Don't be a retard! Press the thanks button!
Dev Jaskirat said:
Great! But battery stats are not necessary to wipe! Dalvik is!
Sent from My Xperia NeoV! Don't be a retard! Press the thanks button!
Click to expand...
Click to collapse
I do it for safety
I tried to flash fxp134, but when I try to reboot, my phone just shows the fxp logo and then goes black.
Yes, I did everything in fastboot, flash boot and reboot. Just goes black after that.
Flashed back to CM9, and that goes all right.
Went to recovery mode in CM9, wiped everything (data, cache, dalvik), rebooted, turned of the phone, went in fastboot mode.
Tried fxp134 again, still the same thing.
I've been searching fora ever since, but I'm not finding anything that can help me. Everybody seems to at least get to recovery mode.
Anyone who can be of help?
Dev Jaskirat said:
Dud u flash the kernel first? Through fastboot! Use the boot.img from the zip! Then flash the main zip! Then wipe data, catche, dalvik catche! Reboot!
Should work if u have the right file for your phone!
Sent from My Xperia NeoV! Don't be a retard! Press the thanks button!
Click to expand...
Click to collapse
Jass5991 said:
Alright. This build.prop error is easily fixed. First, flash a stock ROM. Then flash the kernel for the new rom in fastboot mode. Finally, flash the new rom through recovery. Flashing finished!
Don't forget wipe everything, including battery stats
Click to expand...
Click to collapse
I am currently on Stock ICS 4.0.4 so I guess I should start by flashing kernel (boot.img) first, then the ROM (.zip). RIGHT???
Earlier, I was flashing the ROM (.zip) first, which obviously failed. BUT this was originally mentioned in the FXP Thread.
:fingers-crossed:Anyways, Thanks I will try and let you know the result.:fingers-crossed:
maybe the build.prop file is broken. these informations is stored in the build.prop file under /system folder in the zip of the rom.
Didn't work out
Didn't work out that way either.
Any other suggestions???
well. there can be either of two problems, or both (donno exactly).
1. updater file is broken. (status 7)
2. build.prop file is broken. getprop("ro.product.device")
OR BOTH.
rajxelton said:
well. there can be either of two problems, or both (donno exactly).
1. updater file is broken. (status 7)
2. build.prop file is broken. getprop("ro.product.device")
OR BOTH.
Click to expand...
Click to collapse
yeah, one thing that i tried in terminal emulator.
I executed the command:
Code:
getprop("ro.product.device")
and it returned
Code:
/system/bin/sh: syntax error: '"ro.product.device"' unexpected
However, when I executed:
Code:
getprop ro.product.device
it returned
Code:
MT11i
Can you provide a possible solution to this??
upload the META-INF folder which is inside the zip. and build.prop file which is in /system folder.
I will see what can be done
rajxelton said:
upload the META-INF folder which is inside the zip. and build.prop file which is in /system folder.
I will see what can be done
Click to expand...
Click to collapse
OK, Here is the asked files in the Attachment (check.zip)
GOTCHA!!
hey buddy!!
i had the same problem with installing cm 9 official, solution is very easy and it did work out for me, hell yeah i got it from xda, forgot the dev's name but all credits to him!!!
so i've uploaded your updater-script with changes which is causing all problems :highfive:
just removed these lines:
assert(getprop("ro.product.device") == "MT11i" || getprop("ro.build.product") == "MT11i" ||
getprop("ro.product.device") == "MT11a" || getprop("ro.build.product") == "MT11a" ||
getprop("ro.product.device") == "haida" || getprop("ro.build.product") == "haida");
im not sure if you've edited your script in other ways, if my file does not work, take the stock updater-script from cm10 zip and remove them ^ till the ";"
:good:
any problems?
reply 'em!!
the_neo_v_guy said:
hey buddy!!
i had the same problem with installing cm 9 official, solution is very easy and it did work out for me, hell yeah i got it from xda, forgot the dev's name but all credits to him!!!
so i've uploaded your updater-script with changes which is causing all problems :highfive:
just removed these lines:
assert(getprop("ro.product.device") == "MT11i" || getprop("ro.build.product") == "MT11i" ||
getprop("ro.product.device") == "MT11a" || getprop("ro.build.product") == "MT11a" ||
getprop("ro.product.device") == "haida" || getprop("ro.build.product") == "haida");
im not sure if you've edited your script in other ways, if my file does not work, take the stock updater-script from cm10 zip and remove them ^ till the ";"
:good:
any problems?
reply 'em!!
Click to expand...
Click to collapse
Hey buddy,
I have already tried this. You can see in my first post. I get following error:
khurram.khu said:
Code:
-- Installing: /sdcard/FXP133-cm-10-20120813-haida.zip
Finding update package...
I:Update location: /sdcard/FXP133-cm-10-20120813-haida.zip
Opening update package...
Installing update...
synmlink: some symlinks failed
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
okay. here is the zip now. replace the files in their respective places. make sure to have a backup of originals. also make a nandroid backup before trying. i dont know if it'll work or not. cant test it on my own cause i dont have the rom. good luck.
rajxelton said:
okay. here is the zip now. replace the files in their respective places. make sure to have a backup of originals. also make a nandroid backup before trying. i dont know if it'll work or not. cant test it on my own cause i dont have the rom. good luck.
Click to expand...
Click to collapse
Ok. I will try it later today and tell you the result.:fingers-crossed:
Hey Everyone,
:crying::crying: I have tried everything. Nothing works.
Is there anything else that i can do. I have tried installing FXP-139, FXP-140, PolishBlood 4.1.1.
In each of them I get same error.
i.e.
Status 7 error (assert failed) with the assert lines in the script.
OR
Status 7 error (synmlink: some symlinks failed) if i remove the assert lines from the script.
I have been searching for solution of this issue from many days now. But to my disappointment Non of the solutions I found out works.
PLEASE can anyone help PLEASE :crying:
I tried to flash JellyBam and a MIUI ROM, but both failed with status 7.
I saved a log from Aroma installer after trying to flash the MIUI ROM:
Code:
AROMA INSTALLER version 2.56
(c) 2012 by amarullz xda-developers
ROM Name : M1UI
ROM Version : 2.10.26.v2
ROM Author : a1exander
Device : Samsung Galaxy S2
Start at : Sun Dec 23 16:11:05 2012
script aborted: assert failed: getprop("ro.product.device") == "galaxys2" || getprop("ro.build.product") == "galaxys2" ||
getprop("ro.product.device") == "i9100" || getprop("ro.build.product") == "i9100" ||
getprop("ro.product.device") == "GT-I9100" || getprop("ro.build.product") == "GT-I9100" ||
getprop("ro.product.device") == "GT-I9100M" || getprop("ro.build.product") == "GT-I9100M" ||
getprop("ro.product.device") == "GT-I9100P" || getprop("ro.build.product") == "GT-I9100P" ||
getprop("ro.product.device") == "GT-I9100T" || getprop("ro.build.product") == "GT-I9100T"
assert failed: getprop("ro.product.device") == "galaxys2" || getprop("ro.build.product") == "galaxys2" ||
getprop("ro.product.device") == "i9100" || getprop("ro.build.product") == "i9100" ||
getprop("ro.product.device") == "GT-I9100" || getprop("ro.build.product") == "GT-I9100" ||
getprop("ro.product.device") == "GT-I9100M" || getprop("ro.build.product") == "GT-I9100M" ||
getprop("ro.product.device") == "GT-I9100P" || getprop("ro.build.product") == "GT-I9100P" ||
getprop("ro.product.device") == "GT-I9100T" || getprop("ro.build.product") == "GT-I9100T"
Installer Error (Status 7)
End at : Sun Dec 23 16:11:05 2012
EDIT: Did some more digging and found that the ROMs that failed to flash had an assert command in the beginning of the script,
while the ROMs that worked didn't have an assert command. Is it safe to disable assert command from recovery or remove it from the script?
Or what should I do to flash these ROMs?
Flash a dorimanx kernel http://forum.xda-developers.com/showthread.php?t=1617219 (don't boot) then reboot recovery (in advanced), wipe data (backup with titanium) then flash rom, wipe cache and devlik cache and then reboot
Thanks, that worked.
P990 - same issue
Will this solution work for the Optimus 2x as well?
Thanks.
ilovefls said:
Will this solution work for the Optimus 2x as well?
Thanks.
Click to expand...
Click to collapse
A kernel for the i9100 has ZERO chance of working on an Optimus 2x.
ctomgee said:
A kernel for the i9100 has ZERO chance of working on an Optimus 2x.
Click to expand...
Click to collapse
Then what solution do you recommend for the same issue encountered on the P990?
ilovefls said:
Then what solution do you recommend for the same issue encountered on the P990?
Click to expand...
Click to collapse
Maybe a solution found in the forum for that device?
This thread is in the forum for the GT-i9100 Galaxy S II. Chances of you finding a solution for whatever problem you're having on your Optimus 2x in this forum are pretty small.
ctomgee said:
Maybe a solution found in the forum for that device?
This thread is in the forum for the GT-i9100 Galaxy S II. Chances of you finding a solution for whatever problem you're having on your Optimus 2x in this forum are pretty small.
Click to expand...
Click to collapse
OMG! Can someone at least try to give an answer that is useful?
The reason I posted it here was because it is the exact same problem I have that has been described here. I am fully aware this is an S II thread, thanks for pointing that out!
The error shared is because the update script is c comparing the value of the device identity with a pre-set value in the update (Galaxys2 & Gt-I9100) another solution would to be open the update file hash the lines for the assert and continue to flag bit that would mean disabling a security feature that was put there to prevent faulty flashs.
And yes you re far from where you need to be and I'm no expert in Optimus.
Sent from my GT-I9300 using xda app-developers app
ilovefls said:
OMG! Can someone at least try to give an answer that is useful?
The reason I posted it here was because it is the exact same problem I have that has been described here. I am fully aware this is an S II thread, thanks for pointing that out!
Click to expand...
Click to collapse
Seeing as how I am an i9100 user, and know nothing about the Optimus 2x, my suggestion for you to go to the Optimus 2x forum to ask other Optimus 2x users is perfectly useful.
Just because you got the same error doesn't mean the solution is the same.
And it didn't seem like you knew where you were, because you asked if flashing an i9100 kernel would fix your problem on your Optimus 2x. Kernels for specific devices do not typically work on other devices. Especially if there are major hardware differences. There is a piece of useful information you apparently did not know.
@ilovefls - More to the point, if you flash something meant for the I9100 on whatever the hell phone you have (didn't notice/don't particularly care), there's a fair chance you'll brick it.
So....You can either take the well intentioned advice (and it was well intentioned; nobody told you to get nicked like I am now) you were given & ask in the forum specific to your device, or you can break your phone. No skin off our nads either way.
Actually, the latter would be pretty funny given how dopey you obviously are. I figure it would be just deserts.
So....You can either take the well intentioned advice (and it was well intentioned; nobody told you to get nicked like I am now) you were given & ask in the forum specific to your device, or you can break your phone. No skin off our nads either way.
Actually, the latter would be pretty funny given how dopey you obviously are. I figure it would be just deserts.
OWNED
Sorry very childish of me ..
1Chef said:
Flash a dorimanx kernel http://forum.xda-developers.com/showthread.php?t=1617219 (don't boot) then reboot recovery (in advanced), wipe data (backup with titanium) then flash rom, wipe cache and devlik cache and then reboot
Click to expand...
Click to collapse
Worked for me, thanks for this information now my phone is back up and running.
1Chef said:
Flash a dorimanx kernel http://forum.xda-developers.com/showthread.php?t=1617219 (don't boot) then reboot recovery (in advanced), wipe data (backup with titanium) then flash rom, wipe cache and devlik cache and then reboot
Click to expand...
Click to collapse
thanks...finally on JellyBAM......
Hi,
I have a ZTE phone UK version from ebay with installed zteOpen1.3-signed.zip (git 24-01-2014) found in this forum http://forum.xda-developers.com/showthread.php?t=2587484&page=2. Now I would like to install a more recent git. I have found this https://sites.google.com/site/zteopenfirmware/home/AlternativeFirmware and this http://forum.xda-developers.com/showthread.php?t=2587484&page=4.
Both requires to have installed the official firmware 1.1B from ZTE website.
I cannot reinstall it on my phone since during the recovery mode it displays
Code:
Installing update...
assert filed: getprop_new("RO.BUILD.DISPLAY.ID") == "OPEN_UE_DEV_FFOS_"
E:Error in /tmp/sideload/package.zip
(Status 7)
Any suggestions?
Thank you
erotavlas said:
Hi,
I have a ZTE phone UK version from ebay with installed zteOpen1.3-signed.zip (git 24-01-2014) found in this forum http://forum.xda-developers.com/showthread.php?t=2587484&page=2. Now I would like to install a more recent git. I have found this https://sites.google.com/site/zteopenfirmware/home/AlternativeFirmware and this http://forum.xda-developers.com/showthread.php?t=2587484&page=4.
Both requires to have installed the official firmware 1.1B from ZTE website.
I cannot reinstall it on my phone since during the recovery mode it displays
Code:
Installing update...
assert filed: getprop_new("RO.BUILD.DISPLAY.ID") == "OPEN_UE_DEV_FFOS_"
E:Error in /tmp/sideload/package.zip
(Status 7)
Any suggestions?
Thank you
Click to expand...
Click to collapse
Open the zteOpen1.3-signed.zip file, in the folder META_INF > COM > GOOGLE > ANDROID, edit updater-script and remove the following lines :
Code:
assert(getprop("ro.product.device") == "roamer2" ||
getprop("ro.build.product") == "roamer2");
assert(getprop_new("ro.build.display.id") == "OPEN_EU_DEV_FFOS");
Then save the file and try flashing again.
This might help!
I think it's similar to "status 7" error
Report back!
LinuxHolic said:
Open the zteOpen1.3-signed.zip file, in the folder META_INF > COM > GOOGLE > ANDROID, edit updater-script and remove the following lines :
Code:
assert(getprop("ro.product.device") == "roamer2" ||
getprop("ro.build.product") == "roamer2");
assert(getprop_new("ro.build.display.id") == "OPEN_EU_DEV_FFOS");
Then save the file and try flashing again.
This might help!
I think it's similar to "status 7" error
Report back!
Click to expand...
Click to collapse
Hi,
I would like to reinstall first the version 1.1B from ZTE website and the the 1.3 version found in this website.
Thank you
erotavlas said:
Hi,
I would like to reinstall first the version 1.1B from ZTE website and the the 1.3 version found in this website.
Thank you
Click to expand...
Click to collapse
I'm still confused
SettingComputer said:
I'm still confused
Click to expand...
Click to collapse
I'm actually have firefox os 1.3 from old git and to install the newest git available here http://forum.xda-developers.com/show...2587484&page=4 I need to have installed the version 1.1 B from ZTE. I cannot reinstall this version due to the previous error
Code:
assert(getprop("ro.product.device") == "roamer2" ||
getprop("ro.build.product") == "roamer2");
assert(getprop_new("ro.build.display.id") == "OPEN_EU_DEV_FFOS");
I received this error while I'm trying to reinstall the version from ZTE. Sometimes I received invalid signature...