Hi,
To install Cyanogenmod ROM in my SEXperia Neo, Install boot.img from cm-7.2.0-hallon.zip package and copy the same zip file to SDCard.
After rebooting i start it in bootable mod and does followings:
Wipe data/factory reset
Wipe cache partition
Wipe Dalvik Cache
And then i select "install zip from sdcard" and choose "cm-7.2.0-hallon.zip".
But later i got following message.
CWM-based Recovery v5.0.2.8
--Installing: /sdcard/cm-7.2.0-hallon.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "MT15i" ||
getprop("ro.build.product") == "MT15i" ||
getprop("ro.product.board") == "MT15i" ||
getprop("ro.product.device") == "MT15a" ||
getprop("ro.build.product") == "MT15a" ||
getprop("ro.product.board") == "MT15a" ||
getprop("ro.product.device") == "hallon" ||
getprop("ro.build.product") == "hallon" ||
getprop("ro.product.board") == "hallon" ||
E:Error in /sdcard/cm-7.2.0-hallon.zip (Status 7)
Installation aborted.
I done some research but its doesn't work.
"I found the fix.
if you unzip the zip you downloaded
go into META-INF\com\google\android\
replace your updater-script with the updater-script found in updater-script.zip
RE- ZIP the folders (should have META-INF, system, and boot.img)
Open Recovery and flash should work"
And right now my phone is dead.
Please help me in this issue.
Thanks in advance.
buntu88 said:
Hi,
To install Cyanogenmod ROM in my SEXperia Neo, Install boot.img from cm-7.2.0-hallon.zip package and copy the same zip file to SDCard.
After rebooting i start it in bootable mod and does followings:
Wipe data/factory reset
Wipe cache partition
Wipe Dalvik Cache
And then i select "install zip from sdcard" and choose "cm-7.2.0-hallon.zip".
But later i got following message.
CWM-based Recovery v5.0.2.8
--Installing: /sdcard/cm-7.2.0-hallon.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "MT15i" ||
getprop("ro.build.product") == "MT15i" ||
getprop("ro.product.board") == "MT15i" ||
getprop("ro.product.device") == "MT15a" ||
getprop("ro.build.product") == "MT15a" ||
getprop("ro.product.board") == "MT15a" ||
getprop("ro.product.device") == "hallon" ||
getprop("ro.build.product") == "hallon" ||
getprop("ro.product.board") == "hallon" ||
E:Error in /sdcard/cm-7.2.0-hallon.zip (Status 7)
Installation aborted.
I done some research but its doesn't work.
"I found the fix.
if you unzip the zip you downloaded
go into META-INF\com\google\android\
replace your updater-script with the updater-script found in updater-script.zip
RE- ZIP the folders (should have META-INF, system, and boot.img)
Open Recovery and flash should work"
And right now my phone is dead.
Please help me in this issue.
Thanks in advance.
Click to expand...
Click to collapse
Dead Means what kind of dead? Can u enter fastboot mod.if yes then download any customized stock GB ROM for Neo from xda.flash them through flashtool to boot ur phone.
koushikjgec said:
Dead Means what kind of dead? Can u enter fastboot mod.if yes then download any customized stock GB ROM for Neo from xda.flash them through flashtool to boot ur phone.
Click to expand...
Click to collapse
Thanks for your time.
Dead means i can enter into fastboot mod and can install boot.img into it, but when i reboot it in recovery mod and try to install by selecting "install zip from sdcard" and choose "cm-7.2.0-hallon.zip", it gives intallation abort error.
And flashtool always asks for connecting NEO in USB debugging mode. But i can't do it because i dont have installed ROM in NEO.
Flash the stock ics rom again and after that flash cm7....it should work..or if you have a nandroid backup restore it
Sent from my MT11i using xda app-developers app
At least that is what i did when i ve got that error..and it worked
Sent from my MT11i using xda app-developers app
Sony Software Update Service
buntu88 said:
Thanks for your time.
Dead means i can enter into fastboot mod and can install boot.img into it, but when i reboot it in recovery mod and try to install by selecting "install zip from sdcard" and choose "cm-7.2.0-hallon.zip", it gives intallation abort error.
And flashtool always asks for connecting NEO in USB debugging mode. But i can't do it because i dont have installed ROM in NEO.
Click to expand...
Click to collapse
Have u tried Sony Official Software Update Service.Download from http://www.sonymobile.com/global-en/tools/update-service/.Install and run it,follow on screen instructions.see if it can help.though u will be unrooted after updating to official software.
"Sexperia" hahaaa....it a good word
Sent from my MT15i using Tapatalk 2
assert failed status 7
hi,
getting the same error while installing CM9 stable release.
ro.build.product = MT11i
ro.build.product = MT11a
problem with zip
(status 7)
Installation aborted.
I have a neo V MT11i
bombayboy said:
hi,
getting the same error while installing CM9 stable release.
ro.build.product = MT11i
ro.build.product = MT11a
problem with zip
(status 7)
Installation aborted.
I have a neo V MT11i
Click to expand...
Click to collapse
same here. installing over ICS 4.1.B.0.431
Working method:
Simply flash an official ROM (.ftf) with Flashtool in Flashmode mode;
Flash a correct Kernel (extract it from Cyanogen rom zip, boot.img usually) with Flashtool in Fastboot mode;
Enter recovery CMW;
Perform a full wipe factory reset, and cache wipe nextly;
Finish with applying custom ROM by CWM;
Done.
Related
Yesterday I wanted to re-flash my ROM (did that about 4 times before without complication) because of a random wifi bug. All things did quite fine , i wiped data/system/cache/dalvik-chache/sd-ext but after i said install .zip from sd, there was the error - lavine.
Log:
-- Installing: /sdcard/update.zip
Finding update package...
Openning update packge...
Installing update...
assert failed: getprop("ro.product.device") == "ST18i" || getprop("ro.build.product") == "ST18i" || getprop("ro.product.board") == "ST18i" || getprop("ro.product.device") == "ST18a" || getprop("ro.build.product") == "ST18a" || getprop("ro.product.board") == "ST18a" || getprop("ro.product.device") == "urushi" || getprop("ro.build.product") == "urushi" || getprop("ro.product.board") == "urushi"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
What am i using:
-Sony Ericcson Xperia ray (rooted)
-FreeXperia boot.img (worked the last 4 times)
-official CM7 build for ST18i (worked last 4 times)
i even reflashed the boot.img twice, but nothing changed.
I cant even access Android because i formatted the whole device + sdcard
What am i doing wrong and what can i do now?
Please help me as fast as possible (I need my goddamn phone >.<)
Greetings
~Jay
Really don't know if that helps but once I got exactly the same error. The reason was that the file system of my SD-card was corrupted somehow. Formatting the card several times via PC didn't help. There was the same error message. Finally the solution was to flash stock firmware via Flashtool and format the card from the phone menu afterwards. After that everything worked like expected. I even don't know how the file system got corrupted but the card itself seems to be OK.
Nope. it did not work. Ain't able to flash it with flashtool even after driver updates because falshtool doesn't recognize my phone. Blargh >.<
EDIT: Okay, got Flashtool working now. Have flashed original ROM, currently backing up all things and then trying to flash CM7 or MIUI again
EDIT2: Formatted, reflashing now
EDIT3: Working again! Thank you very much!!! All i need to do now is running titanum backup all over it :3
CM 7.2.0 installation based on nightly builds based on Wicia's Discovery
NOTE: Since i am not allowed to provide the final flashable CM7.zip i wont proved it , but will provide the procedure to get it & flash this at your own risk
thank Wicia for this discovery (http://forum.xda-developers.com/showpost.php?p=20311081&postcount=185)
Installation instructions
1. Download FXP108 from this link.
2. Download SCRIPTS.ZIP file & extract updater-script & build.prop files.
3. open FXP108 zip file , you will see two folders(META-INF & system) & boot.img (kernel) in it.
4. Replacing Updater-script
a. open the nightly file what you've downloaded 'FXP108' using winrar
b. go to this folder path ' META-INF/com/google/android/'
c. you will see updater-script file now Replace it with the file extracted from scripts-update.zip
5. Replacing build.prop
a. open the same nightly file which you've edited before 'FXP108' using winrar
b. go to this folder path ' system/'
c. you will see build.prop file at the bottom now Replace it with the file extracted from scripts-update.zip
6. Installing CM7 Kernel
a. extract the boot.img file provided in the nightly zip to the fastboot folder in your PC
b. power off device , plug in phone usb in fastboot mode & use this command in CMD & flash the kernel
Code:
fastboot flash boot boot.img
7. power on device & goto CWM Recovery & wipe factory settings , wipe cache & install the nightly zip you've edited
8. reboot & enjoy
9. flash the CM7 Camera Fix.zip via cwm later
10. report back to this thread
CM7 Camera Fix.zip
Fixes camera libraries ,HD camcoder works too
Bugs
touch screen issues
Extra Mods
Themes
HDPI Theme chooser Themes
tweaks
those who want to disable the hardware buttons backlight flash backlightmod.zip uploaded in attachments
Click to expand...
Click to collapse
Click to expand...
Click to collapse
CREDITS
FreeXperia Team
Cyanogenmod Team
Wicia
& all GR8 dev's on XDA
Thxxxxxx for ur awesome ROM
Like it
& waiting for ur awesome updates
Sent from my MT11i using xda premium
ha ha this is not my rom .... it belongs to Free Xperia Team & cyanogenmod
Yep, it's working
You can record in HD, but you have to choose 'Youtube HD' option
I recomend using official weekly FXP releases (from http://forum.xda-developers.com/showpost.php?p=16379833&postcount=3 ) instead of nigthlies. WiFi is working fine, the only issue is not fully working camcorder
Wicia said:
Yep, it's working
You can record in HD, but you have to choose 'Youtube HD' option
Click to expand...
Click to collapse
sorry mate it is not working , will try something else....
edit : oh i used nightly , now i have to take permission from FXP
is FM working in this ROM ?
FM and HDMI out are not working in this rom
vimjam said:
sorry mate it is not working , will try something else....
Click to expand...
Click to collapse
It's strange, but it works. If you tried recording HD video and camera has frozen / you force closed it, camcorder will no longer work (it's strange, I know). Try reflashing the rom, flash camera fix and then after rebooting don't try recording in HD. Change video quality to 'Youtube HD' and try recording It works for me, but sometimes it freezes at the begininng. I don't know what to do with it
i'm stuck at infinite bootloop
extracted the zip file inside FXP052 then renamed it to update.zip then replaced the script files, flash the boot.img inside update cm then install that zip file as well but now infinite bootloop
gambit1091 said:
i'm stuck at infinite bootloop
Click to expand...
Click to collapse
did you wipe factory settings in CWM before installing ? if no please try again after full wipe
if it didnt work then try using the nightly(hallon_20) from this link http://get.cm/?device=hallon & try again
vimjam said:
did you wipe factory settings in CWM before installing ? if no please try again after full wipe
if it didnt work then try using the nightly(hallon_20) from this link & try again
Click to expand...
Click to collapse
yes i clear all the cahce and wipe it.. i tried to replace the scripts and install failed, i deleted the 1st 3 lines with arguments in the updater-script and it works fine but yes infinite bootloop
gambit1091 said:
yes i clear all the cahce and wipe it.. i tried to replace the scripts and install failed, i deleted the 1st 3 lines with arguments in the updater-script and it works fine but yes infinite bootloop
Click to expand...
Click to collapse
i've double checked my scripts just now they work fine for me... i cant seem to find any flaw in them
did you follow all my instructions in first post ?
this mod is only for unlocked bootloader
what do you see in CWM after you flash the zip file ? (if everything is correct it should show installation from sd card complete )
I tried it
It's works for me
But to work u should follow instructions correctly
Sent from my MT11i using xda premium
here's the error
Installing failed...
assert failed: assert(getprop("ro.product.device") == "MT11i" || getprop("ro.build.product") == "MT11i" || getprop("ro.product.board") == "MT11i" ||
getprop("ro.product.device") == "MT15a" || getprop("ro.build.product") == "MT15a" || getprop("ro.product.board") == "MT15a" ||
getprop("ro.product.device") == "haida" || getprop("ro.build.product") == "haida" || getprop("ro.product.board") == "haida");
E:Error in /sdcard/update.zip
(Status 7)
Installation Aborted
i tried deleting the
assert(getprop("ro.product.device") == "MT11i" || getprop("ro.build.product") == "MT11i" || getprop("ro.product.board") == "MT11i" ||
getprop("ro.product.device") == "MT15a" || getprop("ro.build.product") == "MT15a" || getprop("ro.product.board") == "MT15a" ||
getprop("ro.product.device") == "haida" || getprop("ro.build.product") == "haida" || getprop("ro.product.board") == "haida");
and now i have (Status 6)
I'm pretty sure that the camcorder crashing is an error in FXP052 and has been fixed in FXP053 which hasn't been released yet:
http://code.google.com/p/freexperia/
FXP053
[ALL]
- latest cm 7.2 fixes
- fix video recorder crash
[RAY/ACTIVE]
- camera flash fix
[X10]
- CM9 alpha release
JN3141 said:
I'm pretty sure that the camcorder crashing is an error in FXP052 and has been fixed in FXP053 which hasn't been released yet:
http://code.google.com/p/freexperia/
FXP053
[ALL]
- latest cm 7.2 fixes
- fix video recorder crash
[RAY/ACTIVE]
- camera flash fix
[X10]
- CM9 alpha release
Click to expand...
Click to collapse
Oh Yeah I'am Waiting For It.......
But When It Will Released??
vimjam said:
CM 7.2.0 installation based on nightly builds based on Wicia's Discovery
NOTE: Since i am not allowed to provide the final flashable CM7.zip i wont proved it , but will provide the procedure to get it & flash this at your own risk
thank Wicia for this discovery (http://forum.xda-developers.com/showpost.php?p=20311081&postcount=185)
Installation instructions
1. Download FXP052 from this link.
2. Download SCRIPTS.ZIP file & extract updater-script & build.prop files.
3. open FXP052 zip file , you will see two folders(META-INF & system) & boot.img (kernel) in it.
4. Replacing Updater-script
a. open the nightly file what you've downloaded 'FXP052' using winrar
b. go to this folder path ' META-INF/com/google/android/'
c. you will see updater-script file now Replace it with the file extracted from scripts.zip
5. Replacing build.prop
a. open the same nightly file which you've edited before 'FXP052' using winrar
b. go to this folder path ' system/'
c. you will see build.prop file at the bottom now Replace it with the file extracted from scripts.zip
6. Installing CM7 Kernel
a. extract the boot.img file provided in the nightly zip to the fastboot folder in your PC
b. power off device , plug in phone usb in fastboot mode & use this command in CMD & flash the kernel
Code:
fastboot flash boot boot.img
7. power on device & goto CWM Recovery & wipe factory settings , wipe cache & install the nightly zip you've edited
8. reboot & enjoy
9. flash the CM7 Camera Fix.zip via cwm later
10. report back to this thread
CM7 Camera Fix.zip
Fixes camera libraries , still cam works but HD camcoder dosent work
Bugs
Wifi & camcoder
CREDITS
FreeXperia Team
Cyanogenmod Team
Wicia
& all GR8 dev's on XDA
Click to expand...
Click to collapse
great work!i am so excited about it..waiting for ur update!
gambit1091 said:
here's the error
Installing failed...
assert failed: assert(getprop("ro.product.device") == "MT11i" || getprop("ro.build.product") == "MT11i" || getprop("ro.product.board") == "MT11i" ||
getprop("ro.product.device") == "MT15a" || getprop("ro.build.product") == "MT15a" || getprop("ro.product.board") == "MT15a" ||
getprop("ro.product.device") == "haida" || getprop("ro.build.product") == "haida" || getprop("ro.product.board") == "haida");
E:Error in /sdcard/update.zip
(Status 7)
Installation Aborted
i tried deleting the
assert(getprop("ro.product.device") == "MT11i" || getprop("ro.build.product") == "MT11i" || getprop("ro.product.board") == "MT11i" ||
getprop("ro.product.device") == "MT15a" || getprop("ro.build.product") == "MT15a" || getprop("ro.product.board") == "MT15a" ||
getprop("ro.product.device") == "haida" || getprop("ro.build.product") == "haida" || getprop("ro.product.board") == "haida");
and now i have (Status 6)
Click to expand...
Click to collapse
try this new script & report back
vimjam said:
try this new script & report back
Click to expand...
Click to collapse
The new script works
Tested it today
Works fine
Shall test it for a while and post results
Thanks
Qwerty123 \m/ said:
The new script works
Tested it today
Works fine
Shall test it for a while and post results
Thanks
Click to expand...
Click to collapse
thanks for reporting back .
waiting for CM9 for NEO V
Works perfectly fine ^_^
No problems at all
Yay \m/
Although erm battery life isn't that good, its acceptable
Vimjam is it necessary to calibrate the battery ?
I never did this before
Can anyone help PLEASE.
I am new to flashing custom ROMS and am having problem flashing this one FXP133 CM10.
The one given here: http://forum.xda-developers.com/showthread.php?t=1780329
I get following error while Flashing:
Code:
-- Installing: /sdcard/FXP133-cm-10-20120813-haida.zip
Finding update package...
I:Update location: /sdcard/FXP133-cm-10-20120813-haida.zip
Opening update package...
Installing update...
script aborted:
assert failed: getprop("ro.product.device") == "MT11i" || getprop
("ro.build.product") == "MT11i" || getprop("ro.product.device") ==
"MT11a" || getprop("ro.build.product") == "MT11a" || getprop
("ro.product.device") == "haida" || getprop("ro.build.product") == "haida"
E:Error in /sdcard/FXP133-cm-10-20120813-haida.zip
(Status 7)
Installation aborted.
When on .42 (GB) stock firmware and Using MT11i NeoV.
In the Dev Thread I got following 2 replies:
dugzino said:
The thing is I did no clean install, simply overwrited 133 one. And now, I'm even more sure about it, in 134 you can feel the butter project!
First install the recommended Baseband (= .72) then flash the kernel then ROM then GApps then data wipe and you're good to go.
If you still don't know, there are lots of tutorials on how to flash ROMs. Just search
Click to expand...
Click to collapse
AND
music.soul said:
Firstly you need to have ICS with baseband .72
if you get the same error ... then open the rom with any archieve ... open up updater-script in meta-inf folder ... delete the lines till ...
Code:
("ro.product.device") == "haida" || getprop("ro.build.product") == "haida"
and save it ... flash it again done!
Click to expand...
Click to collapse
I tried both of them but still with no luck.
Now I am on ICS 4.0.4 with Baseband (.72) and have changed the updater-script and removed the lines (as suggested there) till.....
Code:
("ro.product.device") == "haida" || getprop("ro.build.product") == "haida"
But Now I am getting following error while flashing:
Code:
-- Installing: /sdcard/FXP133-cm-10-20120813-haida.zip
Finding update package...
I:Update location: /sdcard/FXP133-cm-10-20120813-haida.zip
Opening update package...
Installing update...
(Status 7)
Installation aborted.
PLEASE tell me what am i doing wrong. I want to have JB. PLEASE HELP.
Thanks in advance.
Answer these questions:
1. Are you using A Hallon (a.k.a. Xperia Neo) or a Haida (a.k.a. Neo V)
2. Did you download the correct zip corresponding to your phone (Hallon/Haida)
3. In a previous ROM, was your phone listed as what it was not? (a.k.a. You're using a Hallon, but it is written as Haida)
If you answered yes to the third question, then you need to reflash the stock ftf file. THEN flash the custom ROM. Pm me for more help
Jass5991 said:
Answer these questions:
1. Are you using A Hallon (a.k.a. Xperia Neo) or a Haida (a.k.a. Neo V)
2. Did you download the correct zip corresponding to your phone (Hallon/Haida)
3. In a previous ROM, was your phone listed as what it was not? (a.k.a. You're using a Hallon, but it is written as Haida)
If you answered yes to the third question, then you need to reflash the stock ftf file. THEN flash the custom ROM. Pm me for more help
Click to expand...
Click to collapse
1. Haida. i.e. (Neo V or MT11i).
2. Yes from here (http://code.google.com/p/freexperia/wiki/CyanogenMod10 THE FXP133 one)
3. Actually I could not understand this question. By the way currently I am on ICS 4.0.4 stock firmware with Base-band (=.72).
This is what I see in my about phone (Attached Image below).
Thanks again for the support. :good:
khurram.khu said:
Can anyone help PLEASE.
I am new to flashing custom ROMS and am having problem flashing this one FXP133 CM10.
The one given here: http://forum.xda-developers.com/showthread.php?t=1780329
I get following error while Flashing:
Code:
-- Installing: /sdcard/FXP133-cm-10-20120813-haida.zip
Finding update package...
I:Update location: /sdcard/FXP133-cm-10-20120813-haida.zip
Opening update package...
Installing update...
script aborted:
assert failed: getprop("ro.product.device") == "MT11i" || getprop
("ro.build.product") == "MT11i" || getprop("ro.product.device") ==
"MT11a" || getprop("ro.build.product") == "MT11a" || getprop
("ro.product.device") == "haida" || getprop("ro.build.product") == "haida"
E:Error in /sdcard/FXP133-cm-10-20120813-haida.zip
(Status 7)
Installation aborted.
When on .42 (GB) stock firmware and Using MT11i NeoV.
In the Dev Thread I got following 2 replies:
AND
I tried both of them but still with no luck.
Now I am on ICS 4.0.4 with Baseband (.72) and have changed the updater-script and removed the lines (as suggested there) till.....
Code:
("ro.product.device") == "haida" || getprop("ro.build.product") == "haida"
But Now I am getting following error while flashing:
Code:
-- Installing: /sdcard/FXP133-cm-10-20120813-haida.zip
Finding update package...
I:Update location: /sdcard/FXP133-cm-10-20120813-haida.zip
Opening update package...
Installing update...
(Status 7)
Installation aborted.
PLEASE tell me what am i doing wrong. I want to have JB. PLEASE HELP.
Thanks in advance.
Click to expand...
Click to collapse
Dud u flash the kernel first? Through fastboot! Use the boot.img from the zip! Then flash the main zip! Then wipe data, catche, dalvik catche! Reboot!
Should work if u have the right file for your phone!
Sent from My Xperia NeoV! Don't be a retard! Press the thanks button!
Alright. This build.prop error is easily fixed. First, flash a stock ROM. Then flash the kernel for the new rom in fastboot mode. Finally, flash the new rom through recovery. Flashing finished!
Don't forget wipe everything, including battery stats
Jass5991 said:
Alright. This build.prop error is easily fixed. First, flash a stock ROM. Then flash the kernel for the new rom in fastboot mode. Finally, flash the new rom through recovery. Flashing finished!
Don't forget wipe everything, including battery stats
Click to expand...
Click to collapse
Great! But battery stats are not necessary to wipe! Dalvik is!
Sent from My Xperia NeoV! Don't be a retard! Press the thanks button!
Dev Jaskirat said:
Great! But battery stats are not necessary to wipe! Dalvik is!
Sent from My Xperia NeoV! Don't be a retard! Press the thanks button!
Click to expand...
Click to collapse
I do it for safety
I tried to flash fxp134, but when I try to reboot, my phone just shows the fxp logo and then goes black.
Yes, I did everything in fastboot, flash boot and reboot. Just goes black after that.
Flashed back to CM9, and that goes all right.
Went to recovery mode in CM9, wiped everything (data, cache, dalvik), rebooted, turned of the phone, went in fastboot mode.
Tried fxp134 again, still the same thing.
I've been searching fora ever since, but I'm not finding anything that can help me. Everybody seems to at least get to recovery mode.
Anyone who can be of help?
Dev Jaskirat said:
Dud u flash the kernel first? Through fastboot! Use the boot.img from the zip! Then flash the main zip! Then wipe data, catche, dalvik catche! Reboot!
Should work if u have the right file for your phone!
Sent from My Xperia NeoV! Don't be a retard! Press the thanks button!
Click to expand...
Click to collapse
Jass5991 said:
Alright. This build.prop error is easily fixed. First, flash a stock ROM. Then flash the kernel for the new rom in fastboot mode. Finally, flash the new rom through recovery. Flashing finished!
Don't forget wipe everything, including battery stats
Click to expand...
Click to collapse
I am currently on Stock ICS 4.0.4 so I guess I should start by flashing kernel (boot.img) first, then the ROM (.zip). RIGHT???
Earlier, I was flashing the ROM (.zip) first, which obviously failed. BUT this was originally mentioned in the FXP Thread.
:fingers-crossed:Anyways, Thanks I will try and let you know the result.:fingers-crossed:
maybe the build.prop file is broken. these informations is stored in the build.prop file under /system folder in the zip of the rom.
Didn't work out
Didn't work out that way either.
Any other suggestions???
well. there can be either of two problems, or both (donno exactly).
1. updater file is broken. (status 7)
2. build.prop file is broken. getprop("ro.product.device")
OR BOTH.
rajxelton said:
well. there can be either of two problems, or both (donno exactly).
1. updater file is broken. (status 7)
2. build.prop file is broken. getprop("ro.product.device")
OR BOTH.
Click to expand...
Click to collapse
yeah, one thing that i tried in terminal emulator.
I executed the command:
Code:
getprop("ro.product.device")
and it returned
Code:
/system/bin/sh: syntax error: '"ro.product.device"' unexpected
However, when I executed:
Code:
getprop ro.product.device
it returned
Code:
MT11i
Can you provide a possible solution to this??
upload the META-INF folder which is inside the zip. and build.prop file which is in /system folder.
I will see what can be done
rajxelton said:
upload the META-INF folder which is inside the zip. and build.prop file which is in /system folder.
I will see what can be done
Click to expand...
Click to collapse
OK, Here is the asked files in the Attachment (check.zip)
GOTCHA!!
hey buddy!!
i had the same problem with installing cm 9 official, solution is very easy and it did work out for me, hell yeah i got it from xda, forgot the dev's name but all credits to him!!!
so i've uploaded your updater-script with changes which is causing all problems :highfive:
just removed these lines:
assert(getprop("ro.product.device") == "MT11i" || getprop("ro.build.product") == "MT11i" ||
getprop("ro.product.device") == "MT11a" || getprop("ro.build.product") == "MT11a" ||
getprop("ro.product.device") == "haida" || getprop("ro.build.product") == "haida");
im not sure if you've edited your script in other ways, if my file does not work, take the stock updater-script from cm10 zip and remove them ^ till the ";"
:good:
any problems?
reply 'em!!
the_neo_v_guy said:
hey buddy!!
i had the same problem with installing cm 9 official, solution is very easy and it did work out for me, hell yeah i got it from xda, forgot the dev's name but all credits to him!!!
so i've uploaded your updater-script with changes which is causing all problems :highfive:
just removed these lines:
assert(getprop("ro.product.device") == "MT11i" || getprop("ro.build.product") == "MT11i" ||
getprop("ro.product.device") == "MT11a" || getprop("ro.build.product") == "MT11a" ||
getprop("ro.product.device") == "haida" || getprop("ro.build.product") == "haida");
im not sure if you've edited your script in other ways, if my file does not work, take the stock updater-script from cm10 zip and remove them ^ till the ";"
:good:
any problems?
reply 'em!!
Click to expand...
Click to collapse
Hey buddy,
I have already tried this. You can see in my first post. I get following error:
khurram.khu said:
Code:
-- Installing: /sdcard/FXP133-cm-10-20120813-haida.zip
Finding update package...
I:Update location: /sdcard/FXP133-cm-10-20120813-haida.zip
Opening update package...
Installing update...
synmlink: some symlinks failed
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
okay. here is the zip now. replace the files in their respective places. make sure to have a backup of originals. also make a nandroid backup before trying. i dont know if it'll work or not. cant test it on my own cause i dont have the rom. good luck.
rajxelton said:
okay. here is the zip now. replace the files in their respective places. make sure to have a backup of originals. also make a nandroid backup before trying. i dont know if it'll work or not. cant test it on my own cause i dont have the rom. good luck.
Click to expand...
Click to collapse
Ok. I will try it later today and tell you the result.:fingers-crossed:
Hey Everyone,
:crying::crying: I have tried everything. Nothing works.
Is there anything else that i can do. I have tried installing FXP-139, FXP-140, PolishBlood 4.1.1.
In each of them I get same error.
i.e.
Status 7 error (assert failed) with the assert lines in the script.
OR
Status 7 error (synmlink: some symlinks failed) if i remove the assert lines from the script.
I have been searching for solution of this issue from many days now. But to my disappointment Non of the solutions I found out works.
PLEASE can anyone help PLEASE :crying:
Hello,
I was trying to install the Paranoid Android ROM (http://forum.xda-developers.com/showthread.php?t=2203301).
I did everything as always but unfortunately I receive an error:
Code:
CWM-based Recovery v.5.5.0.4 :: CF-v.1.5
-- Installing: /sdcard/pa_i9053-3.15-23MAR2013-gokussjx.zip
Finding update package...
Opening update package...
[COLOR="DarkRed"]Installing update...
assert failed: getprop("ro.product.device") == "m3" || getprop("ro.built.product") == "m3" ||
getprop("ro.product.device") == "i9305" || getprop("ro.built.product") == "i9305" ||
getprop("ro.product.device") == "GT-I9305" || getprop("ro.built.product") == "GT-I9305"
E:Error in /sdcard/pa_i9053-3.15-23MAR2013-gokussjx.zip
(Status 7)
Installation aborted[/COLOR]
Im not a software developer for mobile phones but I guess it is trying to tell me, that the ROM which I'm trying to install isnt working on my device.
But I am absolutely sure that I got an I9305 as you can see on the attached screenshot.
Any ideas?
I9305 Q&A forum this is I9300 .
But suspect a faulty download judged on your information .
INSTRUCTIONS,
1. UPDATE RECOVERY
2. FACTORY RESET
3. INSTALL ROM, GAPPS
4. WIPE CACHE & DALVIK CACHE
5. REBOOT
PA 3+ UPDATES DO NOT NEED A FACTORY RESET,
BUT YOU NEED TO INSTALL GAPPS ASWELL.
JJEgan said:
I9305 Q&A forum this is I9300 .
But suspect a faulty download judged on your information .
Click to expand...
Click to collapse
Sorry... my mistake.
This thread can be closed after I have already reopened it in the correct forum (http://forum.xda-developers.com/showthread.php?p=39743752#post39743752).
Thank you.
I've zte nubia z5s mini with TWRP v. 2.6.3.0 and I installed MIUI V5 on it.
No OTA is able to update, and by reading on the matter, I found out about the build.prop file.
In my current file, I have the line:
Code:
ro.product.device=NX403A
However, the OTAs fail with:
Code:
script aborted: assert failed: getprop("ro.product.device") == "NX403A" ||
getprop("ro.build.product") == "NX403A"
assert failed: getprop("ro.product.device") == "NX403A" || getprop("ro.build.product") == "NX403A"
E:Error executing updater binary in zip
I tried fixing the permissions via Rom Toolbox light & also via TWRP, cleared Dalvik cache, and still, it fails with that message.
Is there anything I can put in the build.prop to fix this?
There are so many threads on the net about status 7.
Does anyone know why this happens?