Ive discussed this problem multiple times, but im reviving it as i have some new information.
my xv6800 on dcd 3.0.1(will flash to 3.0.4 later today) has an issue with the wifi. i tested and discovered that the problem persisted on the stock rom, and after more testing, i think i ahve narrowed the problem down to one possible culprit..maybe
Multiple AP's with one SSID.
My wifi worked at home with few issues, and it works off campus at an place with an AP that i spend time at. the issue comes up when im on campus and i connect to the APs in the dorms and the classroom areas etc...
everywhere else, the SSID's are unique, so there is no confusion(for my phone) but when im at school and i use it, i can connect to the AP, named "buwireless", but when the phone goes to standby and comes back(and tries to connect again) the wifi shuts off and wont come back until a soft reset. what i have been able to do, to be able to use the wifi at school, is to remove the settings that it saves, and just manually connect each time.
I did this because i think the problem occurs when the phone has to connect to the SSID that it know, "buwireless" but the problem is that there are multiple AP's with that same buwireless ssid but with multiple MAC addresses. is it possible that the many APs with the same ssid could be giving me issues?
i dont know what else it could be given the fact that it works very reliably in most places, but at school its not like the phone doesnt work well with that ssid, its that the wifi on the phone actually stops working when it is confronted with that ssid. it wont search for others, and wififofum wont work either.
any more thoughts would be appreciated, and of course similar experiences would be interesting as well.
thanks
Hi, is anyone has the same problem? When I'm connected at home to my Tenda router (WIFI b/g/n) after cca 30 min. my phone WIFI stops sending and recieving data, Skype is offline, etc... but WIFI in phone is stil switched on. After I switch WIFI off and back on (on my Samsung, not on my router), everything works good for a while and after cca 30 min. is situation the same. Is there in Samsung any WIFI sleep mode or something like that? Or some settings, which is not visible? Any other suggestions? Sorry for my poor English. Thanx in advance.
I'm having the same problem. But I did a factory reset and it works fine afterward.
And just few hours ago, I encountered this problem again. What did to get this error was, I pressed "on samsungapps" and it failed to update and thus results wifi connection stopping. What about you? Also my Kies air is not working.
are you guys sure you have wifi sleep policy set correctly? just to be sure, settings, wireless, wifi, menu button, advanced, wifi sleep policy to NEVER.
Yes. And also even if i manually disconnect and reconnect the wifi back. The data still doesn't come in. It is stated there as connected but no data at all.
Somehow Wifi keeps searching every few seconds, even thought it's connected.
This is bound to cost in battery life too.
I have reseted router to default settings, disabled n mode, disabled security (only mac filtering is on), disabled all unnecessary features and PROBLEM IS SOLVED !!! Thanx God Tomorrow I will experiment with router settings to know, what was causing this error ;-)
Well at least u're connected, I'm facing the same problem as the thread starter. No data flow at all. Browser showing me offline msg. I had the same problem on the 1st day with the phone after I woke up. previously playing with most of the default aps. So i'm not sure what went wrong, did a factory reset and it works fine.
Until, few hours ago, I tried my kies air which didn't work. Browser couldnt load the address given. And I thought i had an outdated kies air, so i went to click on samsungapps, which failed to update me. At that point the wifi is still working, i leave my phone for about 30 mins, and when i came back. The same problem which happened on the 1st day came back. I was hoping to find an answer here so I didnt do the factory reset it. On another note, the phone wifi works after restart, but wouldn't last.
Edit: The wifi works after i resetted my modem to default. oh well. at least that solved it.
lukecz said:
I have reseted router to default settings, disabled n mode, disabled security (only mac filtering is on), disabled all unnecessary features and PROBLEM IS SOLVED !!! Thanx God Tomorrow I will experiment with router settings to know, what was causing this error ;-)
Click to expand...
Click to collapse
Hi,
Did you find out what setting was causing the connection issue? I also have this problem with my Tenda router. I thought it might be the wireless N, but disabling that doesn't fix it. I have a wireless distribution system set up with other tenda routers so didn't want to disable all the settings to troubleshoot if i can help it!
Thanks
spen2 said:
Hi,
Did you find out what setting was causing the connection issue? I also have this problem with my Tenda router. I thought it might be the wireless N, but disabling that doesn't fix it. I have a wireless distribution system set up with other tenda routers so didn't want to disable all the settings to troubleshoot if i can help it!
Thanks
Click to expand...
Click to collapse
I have the same problem, my router is N and the conection between SGS2 and my router is bad. Any idea?
Same problem here, I'm running WZR-AGL300NH in access point connected to my Ubuntu Server. Everything else works in the house just fine but SG2 stops transmitting data after a while.
I recently upgraded to KF1 firmware (and unknowingly wiped out whole phone, being on the bleeding edge and that didn't seem to help.
I would very much appreciate all tips because this problem is very annoying!
Additional Info:
- Buffalo is running latest firmware
- Authentication WPA2-PSK
- Encryption AES
paranoidi said:
Same problem here, I'm running WZR-AGL300NH in access point connected to my Ubuntu Server. Everything else works in the house just fine but SG2 stops transmitting data after a while.
I recently upgraded to KF1 firmware (and unknowingly wiped out whole phone, being on the bleeding edge and that didn't seem to help.
I would very much appreciate all tips because this problem is very annoying!
Additional Info:
- Buffalo is running latest firmware
- Authentication WPA2-PSK
- Encryption AES
Click to expand...
Click to collapse
Same symptoms here. Cisco DDR2200. WPA2 PSK. Haven't tried fiddling with the router yet.
This seems to be a common problem. Anyone knows of a definitive fix?
Bump...I have the same problem and the issue persists even after i reset the phone
Sent from my GT-I9100 using XDA App
Glad I found this, thought it was the ROM I had flashed to the phone (which is VillainROM)
I keep losing connection from my phone via wifi like everyone else in this thread
edit: I've just assigned my phone an IP address via my routers settings and I can connect to the net again
Also when it wasn't working, I couldn't ping the phone. When I assigned the IP just now I still couldn't ping it.
When I did a tracert to it, I could get to it when the IP was assigned and when it wasn't.
I have no removed the assigned IP for the phone from the router. Wifi connection is still working after disconnecting/reconnecting wifi on the phone.
I can also now ping the phone, where as before it was getting timeouts.
Also when it wasn't working the first time when I did a tracert it was showing up as HPsomething (didn't make note of the numbers)
this time when it is working it's just showing up as the IP address when doing a tracert.
Another update:
Just checked my printer, it has an IP address manually set on it, which at one stage when the phone wasn't working for internet it had the same IP as the printer, hence when tracert'ing it I was going to the printer instead of the phone and getting the HP etc back.
When it wasn't working at that time and looking at my routers DHCP list, it had the MAC Address of the phone against the IP that the printer has....
So I've got some issues with how my own network is setup ^_^ which looks like is causing me grief.
So the issue is with DHCP? Setting a static IP fixes it? I'll have to try, but I doubt this is a problem with the network, as all my other devices use DHCP without this problem.
I have the exact same problem!!
It's really annoying.
i was having problems with wifi too.. it keeps scanning and checking, etc, signal dropping for no reason..
fixed mine..well for me it worked
backup ur phone ( i dont take responsibility if ur phone catches fire or dies or chases u around )
u need to be rooted
download FXR WiFi fix and rescue from market
and just run the app.
now my wifi signal stays constant speed and i get good speeds
alternatively try
WiFi Fixer
both of them will cause high battery usage..i think since it keeps the signal at maximum.. so only enable wireless when i need it or use juice defender or green power.
greenpower seems great. using this at the moment
Hey guys,
I have a problem with my wifi...
Here is the before: Wifi works about 70% of the time, occasionally the connection would be dropped (as in "no network access", it still said it was connected).
Here is what then happened (in that order): Wanted to find a less crowded channel and installed Wifi Analyzer. Quickly decided that Channel 1 would be cool, browsed to the router configuration on the Desktop machine (LAN connection), changed the channel. Back to home on Android (don't remember whether via the home or back button). Into settings to see whether I would have to rescan or whether it would pick up the change of channel itself. It couldn't connect... It scans and attempts to connect, but doesn't
What I tried:
I restarted the Galaxy. Still couldn't connect.
Deleted the connection and re-entered the passphrase. Still couldn't connect.
Uninstalled Wifi Analyzer. Still couldn't connect.
Restarted device again. Still couldn't connect.
(At some point during all this, probably quite early, the Wifi symbol also stopped showing up in the status bar. Doesn't appear no matter whether Wifi is on or off)
Switched back to the channel I came from. To no avail
Switched of encryption on the Wifi. Still to no avail
Any ideas as to what might have happened and, more importantly, how to fix it? As I said the connection itself has never been the most reliable, but this is a different league
Thank you everyone!
Sandro
If you haven't tried it yet, reset your router. That fixes the majority of Wi-Fi issues out there. If that doesn't work, it may be your router itself. Certain routers have more issues with mobile phones than others.
You may want to go to a friends house and try connecting to his router and see if you can troubleshoot and isolate the issue. Either way, best of luck...
Sent from my GT-I9000 using xda premium
Damn you sitecom router!!!
Alright, one thing I hadn't tried until now was to restart the router. That fixed everything including (for whatever reason) the lack of the Wifi symbol!!
So if that is possible feel free to delete this thread! I didn't find the option anywhere...
Sorry for the unjustified disturbance
Sandro
Hey all,
I've had my Galaxy S II GT-i9100M for a bit more than two months now. It's been on ICS 4.0.3 since the first day I got it, and is unrooted.
Wifi was working fine the first month or so that I've had it. However, in the last month, while trying to connect to my university's networks from the wifi settings screen, it will display "connecting" for a long time, then change to "saved", without successfully connecting to the network. Odd thing is, if I turn the wifi on and off repeatedly, it may connect eventually, with around a 5-15% success rate each try. However, there's also a relatively high chance it will automatically disconnect itself within a few minutes.
The school has three main wifi networks: one is unsecured, while two are secured with exactly the same authentication methods (PEAP + MSCHAPv2) and takes the same login credentials. All three have the same problem when I try connecting. It's not a problem with signal strength, either, since my friends nearby can connect using their phone or laptop without any problems.
Here's what I've already tried to do to fix this:
Asked the school's IT helpdesk
Forget both secured networks so the phone can autoconnect to the unsecured one
Tried wifi diagnostic tools, such as Wifi Analyzer and Wifi Fixer, and tried changing to a better channel
Deselected "back up my data" in the Back Up and Reset settings screen, deleting existing wifi settings from Google's servers
Connect using a static IP address rather than DHCP. Either it has the same Connecting->Saved issue, or says something about "avoided a poor connection"
Did a factory reset, including wiping all user data
The wifi has no problems connecting to my home wireless network, and to most, though not all, other public networks I've tried (same problem as above if it doesn't work).
On a somewhat different note: there are two networks (each of which I've only connected to once at most) that are permanently saved on the list of access points; there's actually no way to forget/delete the network. They even survived the hard resets, and are listed before I link the phone to my Google account. Could this be related to the main issue above?
Is there a fix for this issue? Thanks in advance for any suggestions!
Hey everyone, I got myself a Z2 recently and have been very happy about it for the most part. However, some things seem to not function a 100% the way it's supposed to.
Some times after it's been to sleep and I try browsing online with it using either 3g/4g or wifi the phone says it has a connection, but nothing loads. All I have to do to solve this is to refresh the wifi/3g connection manually, and then it works. It's rather annoying to always go through that procedure every time I want to use my phone, so I'm wondering is there anything I can do about this? Or anyone experienced anything similar?
Vegard
I have the same issue with WiFi while the phone sleeps or is active (no probs with mobile data though!), but I was not able to determine whether it's my router, the phone, or a combination of the two (though I have a hunch).
When I'm in my room which is unfortunately the farthest from the router, and the connection drops, my Z2 is not able to reconnect on its own. Have to disable/enable WiFi or else it's stuck in an infinite loop of connecting and obtaining an IP.
Now, I'm fine with a dropping connection occasionally given the distance and the... quality of my router. However, my laptop is able to reconnect automatically.
I have tried lots of possible solutions: WiFi sleep policy, static IP or DHCP, disabling/enabling WiFi optimisation or Auto-IP, switching WiFi channels, and various WiFi fixer apps. Nothing worked.
My guess? There is a bug in the stock firmware that makes the phone unable to reconnect if a connection is forcibly dropped . Pair this with a crappy router and you have a recipe for inconvenience.
Unfortunately, I have no spare router to confirm this, and with the bugs in CyanogenMod I am reluctant to flash for now.
Also, I am sure this is not a hardware fault of the phone in my case since I notice this behaviour at home in my network only.
Do you guys possibly know where I could find some logs related WiFi? I wanna get to the bottom of this.