Is there anyone who has an archos 70 internet tablet 250 gb with a broken screen and want to sell it?
i dont't have one - but it would be easyer to help u if u would tell wich part u need
i need the main cable that connects the screen with the main board thanks for your reply. i am searching everywhere
well that shouldn't be to hard...
they are called Flexible flat cable
u should get em on ebay or at your local electronic store
The only thing u have to research on your own is the connector type (at mainboard side). But that shouldnt be to hard - imho is should be one of the default connectors for those cables - even im not sure.
Maby "scholbert" knows... u could ask him.
Count the pins and try to buy one - no need for a full device
thanks for your advice but the this cable have other connection on it too is not so simple thanks...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
well the picture is quite small - but I can see it's a bit different "style" then in my 101...
Anyway as there shouldn't be lines carrying combined signals - it still should be possible to rebuild that...
I fear that's the only way u have atm - since we don't know any reseller for replacement parts as far as i know - I saw quite a few people now asking for different things batteries, digitizer, display,...
But the only solution was to take it from broken device each time (besie I saw some sceen without digitizer around)
wich leads to ebay,.. but most time they are not "that" cheap...
yes i am waiting on ebay for something for me but may someone has something here
here is a bigger picture of the cable. i am going to take another picture where the actual problem on the cable is tomorrow.
here is my actual problem one of the bins in my Flexible flat cable is destroyed.
thanks for your help.
help!!!!!!!
any good news guys??????
Related
I was browsing Expansys and found this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was wondering if anyone has one or if they have seen/heard one. My girlfriend wants a USB cradle for her Wizard and as it is only £4 more than just a cradle I thought "why not?". What I am interested in is the speaker quality for listening to music arround the house (away from the gooooood speakers). I don't think it would be a waste of money either way as it is still a cradle even if the speakers are absolute cricket droppings.
If I do get one I'll post an update, it looks likely though.
I've been looking to get my hands on something like that as well. Only places I've seen it so far have been outside of the US. If someone ever carries it in the US, I'm going to be all over it.. Would make for a nice radio replacement at my desk..
Expansys opperates in the US under the name of Mobileplanet, I've not had any issues with them in the UK and all orders have been prompt and problem free.
I found a review:
http://www.mobilitysite.com/articles/link.php?id=342
Only cons are low volume... I'll have to see...
Bummer on the low volume.. Also noticed that the 8125 doesn't fit.. Looks like I'm out of luck for now.. Nuts..
If you have some polycement (melts and re-sets plastics) you could remould the dock section to fit, it is only slightly different shape. You'd need some setting putty to make a cast of the bottom of the Wiza100 then you case the cast to get a wiza100 shaped lower part. you place polycement in the regions that don't match (may require some dissasembly of the cradle) and gently push to change the shape... Would probably make a mess so nvm... LOL
Speaker cradle
Yeah , it looks good , but there's one that looks even better and fits the cingular 8125 !!! But $ 40 is a bit too much to spend on something that'll not work on it's own , well .........
http://cgi.ebay.com/For-HTC-Cingula...h-Speaker_W0QQitemZ230065485683QQcmdZViewItem
Cingular 8125 cradle
What about this cradle I found at BargainCell: http://www.bargaincell.com/product_11268_1201.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Problems:
--Pin chassis, right, blocks the usb and HMDI, (with scissors and cut it to plug the usb). For there is no solution HMDI
--The keyboard does not work (The solution is to plug a hub)
Advantages:
--10$
at the end he finished in a forgotten drawer.
vurrut.
Thats a shame,
Still, thanks for the post. You saved me a tenner.
Rgds
Lok
annoying for this is exactly what i'd like!
Would this not work with the Vega in Host Mode?
I got one of these for my Advent Vega from Amazon for £16.99 delivered. It's OK. Regarding the comments made earlier:-
Problems:
"--Pin chassis, right, blocks the usb and HMDI, (with scissors and cut it to plug the usb). For there is no solution HMDI."
I guess u can cut the lug off but I didnt. Instead I bent back the right hand lug (which is designed to secure the tablet in the case) and put a little velcro on the back of the unit and the case to keep the Vega in place.
"--The keyboard does not work (The solution is to plug a hub)"
My keyboard works fine, although it took me some time to figure out why it didnt work from the off. Being a newbie to android, I didn't understand the usb host / slave stuff and there may have been another complication. I had to check the modaco forum to figure out what to do.
"Advantages:
--10$"
Damn. I paid nearly double that!
"at the end he finished in a forgotten drawer."
I like the case and use it now and then. However I primarily wanted the keyboard for use when travelling to enable me to edit word documents and the like (i.e using the Vega as a laptop/netbook substitute) which is when this particular case comes in handy. Mostly I use my Vega in pure tablet form so I normally keep it in a regular 10" protective sleeve.
vurrut.[/QUOTE]
Looks awesome
You just saved me £10, thanks!
Hi, a friend dropped a glass of beer on his galaxy i9100. Phone looks dead but when he give it to me i've tried another battery and the phone turns on with apparently no problem. So he bought another new original battery, put on and charge the phone. But, temperatures reach critical level and the phone stopped the charge. The temperature raise even without charge with battery in and phone on. So i disassembled and scan for damaged components or some trace of "beer" but the phone looks clear. I then sprayed with a product similar to wd40 (we call it crc in Italy, removes dirt and clear electric contacts) and wait for dry. But same problem. I turned on the phone partially disassembled and the heat is concentrated in the flex hook of the frontal buttons but probably the heat comes from the chip near that.
unfortunately there is no code on that chip so i hope you can understand wich i'm talking about. The only thing is that i don't really know if the heat is from that chip or the flex hook, i don't know how to test it. Looking at it there is no sign of damage. Any advice?
Hope you can understand the problem and apogologize for bad english
ps: with the crc the temperature focused on that chip, before that all the charging flex was over heating
Just post a picture.
Are you talking about the usb/mic board.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is the place where heat reach is max
no ideas? i cleaned the phone completely and nothing changed
All I can say is you look through previous posts about motherboards and see if anyone has an old board you could get.
I dont know how easy it would be to change that component your after.
I dunno about beer but mine (GT-I9100P) had a couple of vodka baths and it still works impeccably. (and when I say baths, I say full glass spilled on it)
Where can I get A10S LCD-KD wire which connects mainboard to the display? I googled, but with no really success.
I blame myself for being so curious in what is there inside (I hear mechanical noises inside, but there's no HDD, I think they was from the power filters). When i opened the case - mainboard to display wire was split up in two parts of a wire where it was soldered (contacts badly damaged) and that's all... (
The ports are seems ok... Only wire...
Can you place a photo ?
One of XDA members send me a replace. I think I'll receive it this month.
And the photo:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Oke problem solved then.
I hope,
because that cable is beyond repair....
Question about a10slcd-kd cable
Dear sir,
My name is Goran. I come from Germany. I have the same tablet as you (Archos 101 g9). Also, I have the same problem wit a10slcd-kd wire. I would like to ask you to help me to find the mentioned wire. where did you find it? Where I can search for it, because I can not find it on internet. Please, help me if you can.
I will waot for your reply.
With respect,
Goran Kovacevic
where did you find it? Where I can search for it
Click to expand...
Click to collapse
I didn't found the site to buy this cable either. Some good guy on this forum helped me with the cable, but wasn't sent it, because he's busy right now. Maybe someone here will help you with the cable, good luck.
The guy who offers me help with the cable did not contact me more than a week, so I think he will not send me a cable.
Too bad...
Can anyone point me at where to find these cables? I don't want to throw it, a tablet is good, I want it to work.
Perhaps a flie market or something like that.
Archos 101 g9 tablet faulty cable
Amadeus01 said:
Perhaps a flie market or something like that.
Click to expand...
Click to collapse
Hello i also have this broken cable and not sure where to get a replacement either, if someone has one to sell id be happy to buy it + postage also i would like to know what this cable is called if poss?
That cable can be carefully detached and attached, I've repaired my Archos 101G9 exactly that way with the working cable.
But that's only info, good luck you all in searching.
Dont forget about sticking it with a strong scotch tape!
I have had it for years, love it, I let my mom borrow and she tried to force the charger in upside down. Anyone have any info on replacing the usb/charger port? pics, advice, prayers, anything would be better than going in blind. I have not opened it yet, but is the footprint the same as a micro-USB (which I am kinda assuming) could I possible just replace the usb with micro-USB port?
thanks in advance
cheers,
disco
dock charging board replacement
disco_y2k said:
I have had it for years, love it, I let my mom borrow and she tried to force the charger in upside down. Anyone have any info on replacing the usb/charger port? pics, advice, prayers, anything would be better than going in blind. I have not opened it yet, but is the footprint the same as a micro-USB (which I am kinda assuming) could I possible just replace the usb with micro-USB port?
thanks in advance
cheers,
disco
Click to expand...
Click to collapse
1)buy parts from here:
parts4repair.com
2)select DOCK CHARGING BOARD
3)buy the right one ( one without 4g antena OR the one with if you have 4g tablet )
4)repacement is easy but repair with patience and slow.
5) have fun
for info : i have repaired once so i know it works
disco_y2k said:
I have not opened it yet, but is the footprint the same as a micro-USB (which I am kinda assuming) could I possible just replace the usb with micro-USB port?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've indicated which three connections that you will have to unplug -- in addition to unscrewing the charging board. The only two tools that you should need are a pry tool (a knife will probably do) and a Philips or Frearson screwdriver.
i had the same idea of doing that, but as far as i know that is impossible