Related
Hi,
so kernel sources are released. Is there any fix for hero's wifi problems? I mean dropping connection to AP. It is so annoying, I tried to do everything: change channel, mode, encryption... Nothing helped. It is Linksys wrt160nl. The same applies to other networks (some public hot spots).
I never had this problem with my Linksys WRT54GL...
mopodo said:
I never had this problem with my Linksys WRT54GL...
Click to expand...
Click to collapse
Could you paste your wifi settings? (mode, encryption mode, channel)
Using the Modaco custom ROM 2.8 (never had problems with modaco ROM and generic)
Router: Linksys WRT54GL running Tomato 1.25 firmware
Wireless Mode: Access Point
B/G Mode: Mixed
Channel: 1 - 2.412 Ghz (try a free one)
Security: WPA / WPA2 Personal
Encryption: AES
Group Key Renewal: 3600 seconds
No Mac Filter
Under Advanced Settings I changed "Transmit Power" to 251mW for a better signal, the rest are default values.
Try to update your router firmware
Are you alone with this problem?
greetz
In case you haven't done so yet. Check out the Wifi Sleep Policy (access by pressing menu when you are in wifi menu). Normally the Wifi is turned off then the screen is turned off which can cause problem.
Similar problem with netgear wnr2000
mopodo said:
Using the Modaco custom ROM 2.8 (never had problems with modaco ROM and generic)
Router: Linksys WRT54GL running Tomato 1.25 firmware
Wireless Mode: Access Point
B/G Mode: Mixed
Channel: 1 - 2.412 Ghz (try a free one)
Security: WPA / WPA2 Personal
Encryption: AES
Group Key Renewal: 3600 seconds
No Mac Filter
Under Advanced Settings I changed "Transmit Power" to 251mW for a better signal, the rest are default values.
Try to update your router firmware
Are you alone with this problem?
greetz
Click to expand...
Click to collapse
Hi got similar problem with my router netgear wnr2000.what i found funny is that when i reset the router, the phone connects perfectly to the router, but after abt 24hrs or so, it fails to connect.even if i reboot my phone, or reset the connection on phone.fails to connect.it will only connect when i reboot the router. i will try the 'aes' encryption n see if that helps.will update if it works
Thanks for your replies. Please could other members share their experiences, used options and solutions. This issue is too common to simply forget it. I am trying to find some kind of pattern or special options, it requires.
i dont have a problem with wifi apart from the wont find or connect to n-range device other wise i use wifi all the time it never drops, on stock orange uk firmware
I have a Sitecom WL-173 router.
I cannot connect at all. I can, but only with no or WEP security. That is no option for me.
When I use WPA or WPA2 my Hero does view my network, but does not connect.
I called HTC about this problem. He told me that they do not support all routers. He could not tell me which they support and which not.
mopodo said:
B/G Mode: Mixed
Click to expand...
Click to collapse
I also have the same problem. The way to solve it is to change the above setting to 'G' only. Not mixed/Hybrid.
Cheers!
I have not had any problems trying to connect to WiFi networks, until i went over to my mates place where he has the Virgin 50MB B-Band and also a D-Link wifi-N router, and my Hero could no see the network at all, even though his iPhone connected straight away.
markoc84 said:
..., even though his iPhone connected straight away.
Click to expand...
Click to collapse
Augghhhhh... that hurts. Please, do not curse in this forum
tembares said:
Augghhhhh... that hurts. Please, do not curse in this forum
Click to expand...
Click to collapse
I'm sorry, it hurt even more when i was sitting there pissed off that my Hero wouldnt connect to the Wifi!!!
I have Virgin 50meg at home no problem at all, went to my GF's who has basic Virgin cable 10meg on netgear G and would not connect at all.
No idea why, as it should be all fine!
I have the same problem. It is so ****in annoying. My router is a Linksys WRT54G with Tomato firmware v1.25. Router is in "G only mode", WPA-2 PSK-AES security, I've set a static local IP for the phone, the phone's wireless is set to always ON... I basically tried everything I could think of. Ended up rooting the phone and installing Modaco 2.9... but didn't change anything. The only way I can get it work again when it drops is shut the Wi-Fi off then on...
Worst of all this is the problem seems widespread (but not universal)... What the **** does HTC think putting a ****in smartphone on the market with defective Wi-Fi... This is non-sense.
I really hope someone comes up with a fix or HTC updates this... otherwise we might want to start thinkin bout class action.
[email protected] said:
I also have the same problem. The way to solve it is to change the above setting to 'G' only. Not mixed/Hybrid.
Cheers!
Click to expand...
Click to collapse
Is it a router setup or a Hero setting?
Pleaes explain if it's one of the options
probs here too ...
Linksys WAP54G v3.1
vs
HTC Hero
was working perfectly for first month or so, but has been getting worse and worse. ie, for a few weeks it would see the wifi but would usually fail to connect. now I'm lucky if it can see it at all!
have reflashed the wap with dd-wrt and experimented with a lot of settings. no diff.
have reflashed the hero with hero21 comunitry v1.6. no diff. (and also latest radio)
it just starts and stops when it feels like it.
oh, and my eeepc works fine on the same wifi, so I know it's not some wap screw up.
tried every tip I can find like 'use mixed mode' or 'g only', etc etc.
I am starting to think it's a hardware fault?
Same problem
Siemens Gigaset Tiscali modem with wpa psk2 tkip and T-mobile hero rom.
Sees the modem and connects with security first time but then says 'remembered out of range' on wifi settings but interestingly in wifi buddy it constantly has the syncing symbol next to the network.
Really annoying.
I've tried WEP and security off, wireless g only etc etc.
I have problems too but seems different to yours... but who knows : in fact i can't connect to wifi when the SSID is masked. Even if - or course - i put manuualy the ssid before with the good wep key. It happens on a livebox ( orange box )... but if i press the button to show the wifi network - it has to be made when you connect a device for the first time on this box - then it connects to the network... else it tells me that the network is out of range...
So does the wifi on hero has problem with masked SSID ? To compare i never had this problem - on the same box - with the touch diamond and the touch hd... and at home, not masking the ssid, the connection is ok without doing anything.
Ciao
Fred
I had the same problem with a Zyxel 660 router. I was able to connect to the wifi (WPA/PSK enable) but there was no data transfer possible.
So I updated the Radio ROM to the 63.18.55.06JU_6.35.08.29 version and it solved the problem.
Hey. My phone arrived today and so did the problems.
I have a wireless router(Asus W530G-V2). The internet runs great on my PC
Just before I went to school I could see my Wireless Network's name but I couldn't connect to it. It simply said Connecting... over and over again. The interned didn't work. Now I got home and and I can't even find the network. If I manually add it it's out of range.
Can someone help me?
Thanks.
edit: once in a while i get a weak connection (tp-link_b22866) that also doesn't work.
lol. check if ur asus router supports wireless internet. does it have an antenna or something?
Yes, it does. My sister used the wireless to use internet on her laptop.
It's possible that you could have entered the wrong password the first time, that would result in the connecting loop you mentioned, as for it not being visible I'm not sure why that would happen unless the SSID of the router is being masked, an idea might be to go to maccas and test your phone using the wifi there maybe? If nothing else connecting to another network would help us diagnose the problem.
I did a factory reset but still, the phone wouldn't see any network.
I'll try adding a wireless card to my PC and see if it receives any signal from the router.
If not, I gotta set up the router somehow.
Thanks.
check if ur router is compatible with the dd-wrt custom firmware. if its compatible flash it on ur router, it will solve all the problems.
or
try this
Small utility that allows you to adjust the transmitter power of WiFi, thus can be great help to save battery life.
Has been done 5 hard dimmer. The apartment is missing 4 or 11 dBm for normal operation. Battery consumption with this sometimes falls on the 60-100 mA.
Nope, dd-wrt is not supported
And I can't install the apk since I don't have internet access therefore I don't have Astro File Manager.
ok try this.
find out ssid broadcast name of ur router from ur sisters laptop.
ask her if its password protected. if yes, get it from her somehow.
then on ur phone do this,
Settings>Wireless & network settings> Wi-Fi settings
turn on the wifi
and select add Wi-Fi network
enter the ssid name in there.
if needed enter that damn password and save it.
voila!
I've tried that but below the network name it says "Out of range".
And my sister ain't here. I don't know if it's my phone that isn't receiving the wireless signal or if it's the router which isn't sending. I'll go later today in a place with hotspot.
Images of the router's settings. maybe there's something wrong here:
http://imgur.com/iJu8n&6TIsH&rkcJk&rKvub
maybe ur sister needs all the bandwidth and blocked ur phones mac id on the router lol
I said above that my sister isn't here now. It's only me so no one is using the wireless.
From what I can see there it's possible that the security on the network could be set to filter MAC addresses, I'm not sure if that is the problem, however at this point I'm not sure what else it could be...
Nah, it's not that.
I've messed around with it(to accepts the phone's MAC, disabled) but still won't work.
I'll go to a mall or somewhere to see if the phone's the culprit here.
Went to the local library and wifi worked smoothly. I've downloaded all the apps I needed(especially Astro file manager). So the router was the problem from the beginning.
Thanks anyway.
Well I'm glad it's not your phone that's the problem, hope you like your 01 and that you get your router working.
Hi,
can you check on which wifi channel your router sends. On my P500 I also don`t see a wifi network above channel 11.
By the way I`d like to know how to enable these channels with my Cyanogen 7.0.2 beta 6.5. I know that there must be some possibilities..
see: http://forum.xda-developers.com/showthread.php?t=576575
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
In my case the problem was with frozen "WiFi sharing" in combination with juicy defenders "Location" fearure. It seems such combination is dangerous. Solutin (in my case):
1. defroze
2. remove all wifi networks
3. reboot (for "clean" frozing)
4. make WiFi sharing frozen
5. reboot again just for fun
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
as above, check that there is no MAC filtering set up.
one other thing it may be is the security settings, if you have a WEP Key to access the router it may need the Hex conversion of your key depending on what level of security you have (64bit or 128bit for example)
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
I have a similar problem and I fix mine temporarily by turning my wifi off, then in wifi settings > advanced, I change wifi sleep policy from 'never' to 'only when the screen is off'. However I have to do this every time I want to use wifi so it can become quite annoying sometimes.
So I can get through however only for a short period of time as it seems as long my Galaxy S2 keeps turning off my wifi even though it's on :/
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
SiSL said:
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
Click to expand...
Click to collapse
Thanks for the suggestion but MAC restriction is already disabled at router
Robsso said:
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
Click to expand...
Click to collapse
Yes, you are right this is not an issue for me.
In fact my SG2 being assigned with an IP address from 192.168.1.xx subnet.
Also at a same time my laptop connected with an IP from same subnet able to ping SG2.
OccasionalDroid said:
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
Click to expand...
Click to collapse
My SG2 being assigned with an IP address from 192.168.1.xx subnet.
So I think IP addressing may not be an issue.
Also another thing I tried was, at a same time my laptop connected with an IP from same subnet able to ping SG2.
So wi-fi router may not be an issue here, whats say ???
Even I am facing the same issue at my office network. I am able to connect to the wireless network but if I try to access any app I cannot browse. This is really frustrating looks like some issue with the modem drivers.
I was able to browse on another wifi created virtually by mobile tethering. This looks like a major bug with the current firmware. Another interesting thing to note is that the Wifi network has a hidden SSID and uses WPA2 auth scheme.
I have seen a Galaxy S able to connect to the same n/w without any issues.
Has anyone figured out a solution to this one ?
Hi, thanks for your reply.
I am yet to figure out a solution for this
Even I am also agree on the probable issue with modem driver.
I've D-link modem.
Are you aware of anything about this modem that can be reconfigured to get this worked ... ?? pl let me know
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
I'm having the same problem at work connecting my SGS2 with v2.3.3 Official Firmware (customized for Orange service provider) to a Cisco Aironet 1130 AP. I can see that the Galaxy authenticates with the AP correctly and gets IP from the DHCP server, but it cannot send or receive any traffic, although the phone stays connected and authenticated. At home, I use an Atheros based Fonera with DD-WRT without any problem.
As I'm the company's network administrator, I will try to further investigate this problem, but it seems like some kind of incompatibility between the devices or misconfiguration ....
Basuk said:
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
Click to expand...
Click to collapse
try turn off the wifi, turn off the mobile data and turn on the wifi again
It seems the SGS2 sometimes has problems with DNS.
Try a static IP and use 8.8.8.8 as second DNS server, which is a free Google DNS server.
This fixed MY problems
I rooted my SGS2 and voila wifi worked at my office finally I have been able to find a solution.. love my SGS2 the Beast...
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
ETA:
I can connect to hotspots (DHCP) and at home (Have to set it to static tho)
No internet
AP works - Laptop and i8910 (had to set static and advanced settigs etc). I've rebooted it a few times, set DHCP on and off. DHCP seems to be running on the router
viqles said:
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
Click to expand...
Click to collapse
This is an issue with SGS2 with wifi server using authentication protocol TPIK, if you use AES as encryption then it will work without any issues.
That should be a setting in my AP? I can't see it...
If I get a new non-crappy AP is that likely to solve my problem?
ETA:
Ah - that's a WPA thing? Mine only seems to do WEP - is that right?
Hi guys, anyone can help me out here with regards to connecting our SGS2 to Wireless N network? I have tried changing my radio frequency setting and even resorted to using WEP authentication instead of WPA, but I just can't get the phone to connect via N network, it always connects via G instead. But under the same settings, I am able to connect my acer laptop and my wife's iphone4 to the N network.
Is there any specific settings I need to configure on my router? I am using a Prolink H5004N adsl2+ modem with wireless N router. The modem is compliant to IEEE 802.11n standards, not draft-n and should work with the SGS2?
wind79 said:
Hi guys, anyone can help me out here with regards to connecting our SGS2 to Wireless N network? I have tried changing my radio frequency setting and even resorted to using WEP authentication instead of WPA, but I just can't get the phone to connect via N network, it always connects via G instead. But under the same settings, I am able to connect my acer laptop and my wife's iphone4 to the N network.
Is there any specific settings I need to configure on my router? I am using a Prolink H5004N adsl2+ modem with wireless N router. The modem is compliant to IEEE 802.11n standards, not draft-n and should work with the SGS2?
Click to expand...
Click to collapse
Not sure, but I think that it will connect if your N-network are in the 2.4 GHz frequency area, but not in the 5.0 GHz
mljjlm said:
Not sure, but I think that it will connect if your N-network are in the 2.4 GHz frequency area, but not in the 5.0 GHz
Click to expand...
Click to collapse
Yup, tried that too, but still connects to G only. I have also tried configuring router to accept only N networks instead of G/N, but then the SGS2 will not even see the SSID when its performing a wireless scan.
wind79 said:
connecting our SGS2 to Wireless N network?
Click to expand...
Click to collapse
Ive got the same issue. Router Asus RT-N16 (b/g/n, 2.4GHz). Playing with different router firmwares, settings and so on - no luck so far.
Check the "advanced" settings by pressing the menu button in the wireless and make sure nothing wierd is set in there.
Otherwise, as long as the router is set to N only on the 2.4ghz band, it should at _least_ see the SSID.
That modem supports WPS, try pressing the WPS button on the back of the modem and then use the "WPS button connection" option in the wi-fi settings menu on the SGS2.
Remember the single-channel 802.11n 2.4ghz such as the SGS2 supports will only max out at 72mbps anyway so there's not a huge improvement over the 54mbps that 11g will give you, although 11n is more efficient.
grey77 said:
Ive got the same issue. Router Asus RT-N16 (b/g/n, 2.4GHz). Playing with different router firmwares, settings and so on - no luck so far.
Click to expand...
Click to collapse
I've got the same unit and it works fine with it, that said I'm running a recent build of the Tomato firmware on mine. I don't think I even powered it up fully with the original firmware...
knightnz said:
Check the "advanced" settings by pressing the menu button in the wireless and make sure nothing wierd is set in there.
Otherwise, as long as the router is set to N only on the 2.4ghz band, it should at _least_ see the SSID.
Click to expand...
Click to collapse
thx for fast reply
SGS2 can see SSID, but fails to connect until I force RT-N16 (with custom firmware, RT-N16-1.9.2.7-rtn-r3121) down to "Use 802.11 G only".
Never had any problems with other 802.11 N powered devices.
only wpa2-aes or no encryption are N-standard
wind79 said:
Hi guys, anyone can help me out here with regards to connecting our SGS2 to Wireless N network? I have tried changing my radio frequency setting and even resorted to using WEP authentication instead of WPA, but I just can't get the phone to connect via N network, it always connects via G instead. But under the same settings, I am able to connect my acer laptop and my wife's iphone4 to the N network.
Click to expand...
Click to collapse
wireless N only officially supports either WPA2-AES encryption or no encryption. Devices with drivers that more closely comply to the spec will not connect to WEP or WPA.
I hope you fixed the issue. I stumbled across this thread while asking the same question; maybe someone else will benefit by having this thread wrapped-up also. No haters, egos, persons, etc please. It's been necessary already to block a few of you.
I am not able to connect my Transformer Prime with my new Asus N66U router. I tried all channels and security settings and it only connected when to the router with open system setting. I am able to connect it to my old Netgear WDR3700 in good speed without any problems. Does anyone run into similar situation?
I have the rt-n66u router as well and never had a problem. Are you sure you are using the right encryption settings, Do other devices connect, have you updated the router's firmware? There was a new update just today.
http://support.asus.com/download.as...T-N66U (VER.B1)&os=&hashedid=PZkFHlMrGWzVROxT
have you ensured your router has the latest firmware?
I have the N56u model and no issues.
Yes, I have the latest firmware. My Galaxy Nexus connects just fine. The Transformers Prime actually see the router with strong signal. It just refuses to connect to it. BTW I set the router using WPA-PSK.
Is your prime running the latest update? Or, have you tried DD-WRT?
I have the latest firmware in both devices. However, my Prime is the first batch and may suffers from wifi issues. I may have to try Tomato or Dd-wrt firmware.
Sent from my Galaxy Nexus using Tapatalk 2
Some routers let you disable the broadcasting of the network name (SSID). Computers/network cards that conform correctly with the 802.11 specification will refuse to connect. Have you checked the settings for both 2.4 and 5GHz? - of course the router should not allow disabling of the SSID!
odd. Try wiping the data. Small pin hole in back of router. Reset it. Then 192.168.1.1. go in there and reenter your SSID etc on wireless.
For ****s and giggles. Pump up your 80mw Tx power of wireless to around 160mw. I been running 160mw tx power for awhile and have not and any problems. This baby can go all the way up to 500mw. Of course that is U.S. FCC range limit. With 500mw you can see your wireless from few blocks away.
If your prime is connecting to your other wireless router. Then has to do with some setting in on the RTN66U. Hopefully the wipe will clear any setting in the firmware.
Forgot to mention. Your prime will only connect to the 2.4ghz. It won't connect to the 5ghz wireless.
Did that already. My Transformer does see the 2.4 Ghz SSID with very strong signal. It just keeps reconnecting and fails to connect again eventually. My Galaxy Nexus can connect in a very good speed. Change back to my old Netgear WDR3700 and my transformer connects to it right away. It seems to me that the problem is the security encryption as connection is established right away in open system. However, it just refuse to connect on whatever setting I tried.
ariesting said:
Did that already. My Transformer does see the 2.4 Ghz SSID with very strong signal. It just keeps reconnecting and fails to connect again eventually. My Galaxy Nexus can connect in a very good speed. Change back to my old Netgear WDR3700 and my transformer connects to it right away. It seems to me that the problem is the security encryption as connection is established right away in open system. However, it just refuse to connect on whatever setting I tried.
Click to expand...
Click to collapse
What are the WiFi standards on the Router set to?
Sometimes when a router is set to b/g/n (all combined) it can lead to issues.
I generally keep mine at b/g (no n) on the 2.4 Mhz band, since my n devices run on my router's 5 Ghz band anyway. Try that out.
I tried "auto", "legacy" and "n only" with or without "b and g protection" but still could not connect to the router in any combinations. Will like to know the feedback from anyone who put Tomato on N66U.
If you have kept the same SSID as your old router did you delete the old network settings for that SSID in your TP? Also try a new SSID on the router.
If the router supports WiFi Multimedia (WMM) try disabling it and re-enable it after a connection has been made.
I presume you would know if you had enabled an allowed devices table -MAC addresses. The only other thing I can think of is the size of the "hello I'm here" beacon that the router transmits is too long for the TP and I think that would only be an issue with a very long SSID
Yes, I do keep the old SSID. However, I did forget the network and reconnect to it again in Transformer. My SSID is less than 10 characters. It seems to me that the Transformer is not able to get an IP nor pass the authentication stage.
ariesting said:
Did that already. My Transformer does see the 2.4 Ghz SSID with very strong signal. It just keeps reconnecting and fails to connect again eventually. My Galaxy Nexus can connect in a very good speed. Change back to my old Netgear WDR3700 and my transformer connects to it right away. It seems to me that the problem is the security encryption as connection is established right away in open system. However, it just refuse to connect on whatever setting I tried.
Click to expand...
Click to collapse
Well. Go under advanced settings and then Wireless.
Wireless -General tab.
Frequency click (2.4ghz).
Your SSID (name).
Hide SSID = (No)
Wireless Mode put in (N Only).
Control Channel (1).
Channel Bandwidth (20mhz).
Authentication Method (WPA2-Personal).
WPA Encryption (AES).
Enter your WPA Pre-Shared Key (password for SSID).
Network Key Rotation Interval to (0).
Wireless -Professional Tab
Frequency (2.4ghz)
Enable Radio (yes)
Date to Enable Radio (Check all days)
Set AP Isolatd (No)
Multicast Rate (Disable)
RTS (2347)
DTIM (3)
Beacon (100)
Enable TX burst (Enable)
Enable Wireless Multi (Disable)
Enable WMM (Enable)
Tx Power adjustment (80)
Try those settings. See what happens.
Will try it as soon as I get back home. Thanks.
I am finally able to get my Transformer connecting to my RT-N66U router by changing the SSID to a new one. The speed and range are not better to my old Netgear WDR3700 though. Thanks for all the help anyway.
ariesting said:
I am finally able to get my Transformer connecting to my RT-N66U router by changing the SSID to a new one. The speed and range are not better to my old Netgear WDR3700 though. Thanks for all the help anyway.
Click to expand...
Click to collapse
Good to hear!
I've had the occasional connectivity problem with mine, on certain routers I can get connection but no online connectivity.
some routers use a nonstandard DHCP range (i think it may the ones that utilise 192.168.1.x) anyway, if you encounter this it's simple to correct once you know you simply define a manual ip on the prime for that connection and voila! :>
ariesting said:
I am finally able to get my Transformer connecting to my RT-N66U router by changing the SSID to a new one. The speed and range are not better to my old Netgear WDR3700 though. Thanks for all the help anyway.
Click to expand...
Click to collapse
Cool. Glad you got it working.
Well you can always try and pump your TX power adjustment from the default 80 to 160 or more. I was able to increase my range. I think the max is like 500mw the chip is rated at. However, I havent tried that high. I don't want to burn out my chip. Plus heat increases dramatically at those higher mw's. You would have to toss a little laptop cooler underneath it. (run via the routers usb port there).
My connection problem happens again. Just in case someone has similar issue, I solve the problem by exchanging a new one from store.
ariesting said:
I am not able to connect my Transformer Prime with my new Asus N66U router. I tried all channels and security settings and it only connected when to the router with open system setting. I am able to connect it to my old Netgear WDR3700 in good speed without any problems. Does anyone run into similar situation?
Click to expand...
Click to collapse
I have the n66u too and have no issues.