HELP screen stays black - HTC EVO 3D

Hi,
Since yesterday my screen stays black,
when i want to turn it on nothing happens.
i thought it should be the battery but i can´t charge it.
when i plug on the power cable it give a red led light, but for a few seconds.
after that the led goes away and nothing happend.
can someone help me with what to do?
Jan

We need more info. Are you rooted, stock or custom rom, have you had the battery tested, installed any new apps? Any info might help
We're comin from a pure power source.

Did you underclock or overclock?
We're comin from a pure power source.

sorry a bit more information now,
I followed yesterday the steps from htcdev [dot] com
when i started the phone yesterday with volume down and power it says that its rooted.
i tried to install a custom rom, but the htc logo stays.
i have read the post and it says that it takes quit long to run for the first time. so i wait. ( i fell asleep )
the next morning my phone doenst go on.

Did you wipe everything before flashing the rom? Maybe a bad download. What recovery are you using?
We're comin from a pure power source.

yes i wiped everything i tried the lee rom or something... what you mean with recovery?

Clockwork recovery or twrp recovery
We're comin from a pure power source.

Is your firmware up to date for the rom? Is your phone cdma or gsm? Which version of the rom?
We're comin from a pure power source.

Me too!!!!!!!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

yea i understand, but how can i do a recovery if my screen doens't turn on?

You can't even boot into fastboot or recovery? No screen for those either?
We're comin from a pure power source.

No my phone doens't do anything since this morning.
it begins with the htc startup screen yesterday and now if i push the power button i dont get a response from my phone.
the only response is when i put the charger it displays the red indicator led for a few seconds but afther that i goes away and nothing happend.

You might need to use an ruu
We're comin from a pure power source.

how do i use an RUU? can you help me?

Find the right one, in the dev section in the stickies I think. Its a exe file you run through your pc
We're comin from a pure power source.

incarnez said:
Hi,
Since yesterday my screen stays black,
when i want to turn it on nothing happens.
i thought it should be the battery but i can´t charge it.
when i plug on the power cable it give a red led light, but for a few seconds.
after that the led goes away and nothing happend.
can someone help me with what to do?
Jan
Click to expand...
Click to collapse
You should not flash a rom directly from recovery.I guess you did it without fastboot method so it is staying at the htc logo screen (as the kernel from the new rom did not get written on the boot partition). And the battery is completely discharged now as you fell asleep on the htc logo screen, it sucked up all the battery.
Now try to boot into bootloader (using power+volume down) if it cant turn on , then you might have to charge your phones battery using a universal charger (like this http://www.youtube.com/watch?v=YKsxq8SeN3Q ). After a charging of few mins if still it doesnt boot , then you might have to use another battery.
After charging/changing ur battery
>boot ino bootloader by pressing ( vol down + power )
> select fastboot on phone and connect phone to PC(phone should say fastboot-USB)
> run command prompt and navigate to your fastboot folder in cmd (folder which you used while unlocking your bootloader.It should have some file like fastboot.exe, adb.exe etc)
> open up your ROM.zip using winRAR and copy the boot.img from the zip to your fastboot folder
>then in command prompt type "fastboot flash boot boot.img"
>then download this http://forum.xda-developers.com/attachment.php?attachmentid=803714&d=1322926029 and extract it to your fasboot folder
>then in command prompt type "fastboot flash recovery cwm.img"
>then type "fastboot boot cwm.img" then recovery should boot (You should also see the RED LED lit up in recovery mode.)
>Wipe everything
>Now in recovery select install zip from sdcard and flash the same ROM.zip from which you copied the boot.img.
Then reboot your phone it should work and should not stuck on the HTC logo screen.
HOPE THIS HELPS............

Thanks for the help,
i have striped a usb cable and started the phone with the red and black wire to the accu so it start charging.
now i run in the boot loader and do the steps you say,
when you say the phone start with the recovery it stays on the htc logo splash screen... again...
did i something wrong again?

incarnez said:
Thanks for the help,
i have striped a usb cable and started the phone with the red and black wire to the accu so it start charging.
now i run in the boot loader and do the steps you say,
when you say the phone start with the recovery it stays on the htc logo splash screen... again...
did i something wrong again?
Click to expand...
Click to collapse
Do you own or know the recovery name that worked that time when you intalled the ROM?
try using that instead of cwm.img then check if that 1 boots. Also type the name of the recovery in command prompt instead of typing cwm.img.
If that 1 also fails you will need to lock your bootloader and flash RUU. Then everything will be fine AFAIK. But only use RUU made for your phone.
Do you have sprint cdma evo 3d or rogers or any other?

i dont know where to find my version of HTC EVO 3D?
i come a bit further now and i can boot into the recovery modes and select a install from sd rule. when i select install from zip and select the zip on my sd card. it loads for a while and after a while it says. installation aborted. when i toggle singature verrification it give me the error verification failed.
what to do now?

Simple go into settings/power and turn fastboot off also see if there is an update available software wise
Sent From My Super Evo3d
Powered by HTC

Related

Need Support, URGENT

Hello everyone,
I've used Mokee 4.4.4. Rom on my XT910. Then I decided to upgrade it Marshmellow 13. First I tried to install it via BMM then had error status 7. Then tried to set it up via Safestrap and I followed the instructions but install had been faild. Then restarted to device and surely no OP will run cause of wipe. I got error to install any OP as
HTML:
"E: failed to verify whole-file signature, E: Signature verification failed, Installation aborted"
via android system recovery 3e qe2/1. Now the device is wont work any OP and it doesn't turn off. Restart it self over and over.
Here my questions
1. How can I install and up to upgrade again to my device?
2. What does "qe2/1" means. I saw somewhere about root. But I was rooted. And if I need to root again. Which version root files need to be install? What will happen if I root it twice?
3. What will happen if I load to old files?
4. Is it about Kernel? Does any new kernel exist?
5. And what's your advices.
Guys I've less knowledgefor phone. Therefore I need your help. I need detailed explanation to unbrick it. Thanks again.
Regards.
UPDATE: Somehow now I can't reach recovery too. I've just reach AP fast boot menu (flash mode active but battery low, and doesn't charging). Can I send any of fastboot files or is there some file for my stiuation?
UPDATE 2: I've clockworkmod backup BTW. boot_3.0.8-g7198280 and cid_800EB95C-000600CC
UPDATE: Somehow now I can't reach recovery too. I've just reach AP fast boot menu (flash mode active but battery low, and doesn't charging). Can I send any of fastboot files or is there some file for my stiuation?
exilada said:
UPDATE: Somehow now I can't reach recovery too. I've just reach AP fast boot menu (flash mode active but battery low, and doesn't charging). Can I send any of fastboot files or is there some file for my stiuation?
Click to expand...
Click to collapse
op = original poster
you were using clockworkmod? not safestrap?
you cannot charge in AP fastboot mode or stock recovery
you cannot flash firmware with low battery
Booting from AP fastboot to charging mode
If the Device will only boot to AP Fastboot and it says Battery Low
Connect the phone/Device ato a Wall Charger (not PC)
-In AP Fastboot Mode hold Volume down& power buttons at the same time for +10 seconds
- When screen goes black...release power button
-Then IMMEDIATELY press and hold Vol - and Vol+ to boot to Boot Menu.
- In Boot Menu scroll down with volume down to BP Tools, press volume up to select
- Device should boot to Charging Mode with battery icon
- Once battery is charged, try flashing in AP Fastboot again
This will only work if battery charging Firmware is still preset and not corrupted
If Motorola Device will not boot to Charging Mode, a Fastboot cable will be needed.
What is a Fastboot Cable
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my KFFOWI using XDA Labs
sd_shadow said:
op = original poster
you were using clockworkmod? not safestrap?
you cannot charge in AP fastboot mode or stock recovery
you cannot flash firmware with low battery
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse
Firstly thanks for answering
I was use Boot Menu Manager and backup cid via BMM. And then erase BMM and install safestrap on mokee 4.4.4.
phone is able to firmware flashing, at least its not warn at this stage. but I'm afraid to do that with low battery. Also thanks for charging trick but i've been tried that. It's not working for me.
PROBLEM SOLVED! I get factory cable and flash it

Red LED. Can't access fastboot or recovery, stuck in bootloop that drains battery.

It's a bit of a strange problem, I'll start from the start.
I tried to update my Z2 with a new rom but I got stuck with my recovery saying that the rom was for a diffrent device (It incorrectly identified my device as a "Leo" instead of "Sirius")
I found a diffrent version of TWRP that suposedly fixed this issue but when I flashed it in fastboot all I got was a boot loop with the sony logo. It doesn't get to the point where the LED lights up and you press the volume button to get into recovery.
I tried to go back into fastboot mode/download mode to try and force it to boot into recovery that way, this is when my battery went flat and the real fun began.
When I try to charge it straight off a wall charger It would automatically boot up to the sony logo and get stuck in it's boot loop.
The problem is that this boot loop seems to drain the battery faster than I can charge it. After awhile the screen goes black with a red LED indicating a flat battery and as soon as it gets enough charge it'll try and boot again.
I can get it into download mode only if I let it charge for awhile and then go through the steps using the wall charger and not the PC, this obviously doesn't do me any good but at least it is possible to access this mode if I can get enough juice back in it.
Is there anyway of stopping it from trying to boot while I'm charging it?
Any suggestions would be greatly appreciated, I'm at a loss with what to try next.
maggot11 said:
It's a bit of a strange problem, I'll start from the start.
I tried to update my Z2 with a new rom but I got stuck with my recovery saying that the rom was for a diffrent device (It incorrectly identified my device as a "Leo" instead of "Sirius")
I found a diffrent version of TWRP that suposedly fixed this issue but when I flashed it in fastboot all I got was a boot loop with the sony logo. It doesn't get to the point where the LED lights up and you press the volume button to get into recovery.
I tried to go back into fastboot mode/download mode to try and force it to boot into recovery that way, this is when my battery went flat and the real fun began.
When I try to charge it straight off a wall charger It would automatically boot up to the sony logo and get stuck in it's boot loop.
The problem is that this boot loop seems to drain the battery faster than I can charge it. After awhile the screen goes black with a red LED indicating a flat battery and as soon as it gets enough charge it'll try and boot again.
I can get it into download mode only if I let it charge for awhile and then go through the steps using the wall charger and not the PC, this obviously doesn't do me any good but at least it is possible to access this mode if I can get enough juice back in it.
Is there anyway of stopping it from trying to boot while I'm charging it?
Any suggestions would be greatly appreciated, I'm at a loss with what to try next.
Click to expand...
Click to collapse
Flash stock ftf with flashtools
Or flash a kernel that has built-in recovery (like elite kernel)
And flash an stock based rom to revive you phone then flash anything you want
raminta said:
Flash stock ftf with flashtools
Or flash a kernel that has built-in recovery (like elite kernel)
And flash an stock based rom to revive you phone then flash anything you want
Click to expand...
Click to collapse
I have attempted this but I can't get it to boot into download mode to flash a stock firmware without getting more of a charge in it.
I have ordered charging cable that connects to the magnetic dock connection and hopefully that will let me keep it charging while flashing.
maggot11 said:
I have attempted this but I can't get it to boot into download mode to flash a stock firmware without getting more of a charge in it.
I have ordered charging cable that connects to the magnetic dock connection and hopefully that will let me keep it charging while flashing.
Click to expand...
Click to collapse
First use Xperifirm from flashtool to download D6503_23.5.A.1.291_1281-9715_R4D.ftf
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Let it download and then use the little "OFF" Button by the Sim card tray. It'll turn phone off completely. Then plug USB Cable into phone and hold Volume UP while plugging USB Cable into PC.
Then use Flashtool to flash the firmware you downloaded.

Start Error in Pixel Experince, by Boot.img flashed by Fastboot (phone almost brick).

Hello friends, I hope you are well. I am writing to everyone to see if anyone can help me with this big problem.
Yesterday install the Rom Pixel Experience, all good, all the steps to perfection and others, had microSD at that time so flash the boot.img by Fastboot. It seems to install the Boot.img in the Recovery TWRP partition, or something like that. Because I do not have the Recovery either, when I try to go to the recovery, the window "Bootloader Unlocked" appears, but it does not take me anywhere, only to the boot of the rom, it is something very strange and the truth scares me. I clarify: I can not access the Fastboot, nor the download mode, nor the recovery, because it does not.
There will be another way: ????
PLEASE IF SOMEONE CAN HELP ME, FIND ANOTHER METHOD TO ENTER THE FASTBOOT OR DOWNLOAD MODE, THE SOLUTION THAT WORKS WILL PAY ME WELL TO THE PROPONGA, PLEASE, I DO NOT WANT TO LOSE MY MOBILE, I BUY IT WITH A LOT OF EFFORT.
Last night I dawned on the boot logo, until it was completely downloaded and at this moment it continues to do so ... By GOD!
When trying to enter the Fastboot or download mode, it takes me here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Image extracted from: https://www.tomshw.it
Then he starts loading the rom and stays there all the time .:
Image extracted from: https://www.tomshw.it
I can not access Fastboot, nor download mode, nor recovery, because it has disappeared. There will be another way to enter the Fastboot or download mode, because the phone actually woke up until I wake up today and was even charged. PLEASE.
Hey, sorry for your sad state. Following process worked for me when I got stuck yesterday like that.
1. Connect your phone to PC ( make sure adb/fast boot is setup)
2. Hard reboot your phone with power plus volume down button.
3. As soon as your phone turns off, press volume down only and keep it pressed till you enter fastboot.
4. After this phone should be recognised in PC and you should be able to boot in TWRP using fastboot.
ZestyManu said:
Hey, sorry for your sad state. Following process worked for me when I got stuck yesterday like that.
1. Connect your phone to PC ( make sure adb/fast boot is setup)
2. Hard reboot your phone with power plus volume down button.
3. As soon as your phone turns off, press volume down only and keep it pressed till you enter fastboot.
4. After this phone should be recognised in PC and you should be able to boot in TWRP using fastboot.
Click to expand...
Click to collapse
Hope this works for you @Yeriorlando. @gimpy1 had a similar issue when installing Havoc ROM. Part of the problem seems to be when installing the custom kernel?
gimpy1 said:
It was operator error (generally is) on my part, I'm sure. The only thing I did different that I can remember is installing the 9.0 boot image in twrp differently. I installed it in the recovery option first (intentionally, should not have), instead of ticking only the boot choice. I did not untick the recovery option (should have never ticked it in the first place, but I was trying to correct a problem on the ROM, and misread a post).
Click to expand...
Click to collapse
He was able to reinstall TWRP using fastboot.
gimpy1 said:
Thx, Chaz. I pulled out my printed instructions from your post, and once I was able to get my device recognized (that did take a couple of tries), reinstalling twrp was pretty easy.
I'm back in business thanks to you.:good:
Click to expand...
Click to collapse
IF you still can't after the suggestion at top, maybe @SGCMarkus or @runningnak3d have some tips?
Unless you have an H932, then if you get the error that: "Your device software can't be checked for corruption" then you have fastboot. It is literally impossible to have that message on a WTF rooted phone and NOT have working fastboot.
So, as @ZestyManu said -- make *sure* your phone is powered off. If you have to let, the battery die. Then hold vol down + plug in the USB cable (no need to touch the power button) and you will enter fastboot.
-- Brian
Thank you all. I have solved the problem in a super crazy way, to pure ADB, not fastboot .... Pure ****ing adb ... Hehehehe. Thanks to @ChazzMatt

ADB Pull possible on boot loop? (Should have been unlocked but maybe not?)

Hello everyone,
I've been googling this for the past couple days it's been driving me crazy. Stock 7 (I think), should have been unlocked but is showing locked.
1. My friend gave me the Nexus 9 which turned off one day, then wouldn't turn on again.
2. I plugged it in, and it turned on fine. Assumed bad usb port, he said keep it. I enabled developer options, then did "OEM [bootloader?] unlock" and "USB Debugging" toggles on (from memory, may not be right phrasing)
3. While trying to back up his data on it by ADB Pull, it would randomly stop. Using it, it would reboot unexpectedly.
4. So I went to Software Update.. bad idea in retrospect probably it rebooted during or something? It was fully charged and on AC power but I wasn't watching it.
5. I come back and it keeps bootlooping. Went into recovery, says "Device Locked" - Tried clearing cache, no difference. Tried sending bootloader unlock command with fastboot, says I have to delete all data to unlock.
The only lead that I have is that it might be possible to image TWRP to recovery, then boot into it so that I can get files off it (With OTG Flash drive or USB?) - I wanted to ask for help here first.
I did my best to search for this prior, but I've been out of the ROM game since 2012 cyanogenmod days.. Hope that it's possible to save my friend's data, and then also to flash a new ROM which will solve the reboot issue.. Thanks!
Boot to recover, then when you get the Android mascot with the belly open, press ( I think vol up plus power) to get to a functional recovery with ADB support.
gk1984 said:
Boot to recover, then when you get the Android mascot with the belly open, press ( I think vol up plus power) to get to a functional recovery with ADB support.
Click to expand...
Click to collapse
Thanks GK,
After going into recovery mode, there's the android mascot with the belly open as you describe. Then, I do (VolUp+Pwr) and it produces this screen below, which I'm guessing people call "fastboot". When I'm there, my Win10 PC makes the "USB item attached" noise, and I can use fastboot commands, but adb devices won't show anything. Do you have any ideas?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I thought I could use the fastboot access I have to flash twrp, but I get the following error. I switched the "OEM Unlock" toggle, but i'm guessing that doesn't mean anything until I unlock the bootloader in recovery (which necessitates deleting all the files). I followed the directions on the twrp website which claim that root isn't needed, but I guess unlock is.
Code:
PS C:\Users\User Profile\Downloads\platform-tools_r30.0.1-windows\platform-tools> .\fastboot flash recovery twrp.img
Sending 'recovery' (13254 KB) OKAY [ 0.838s]
Writing 'recovery' (bootloader) Device State : Locked
FAILED (remote: 'Can not flash any images while device state is locked!')
fastboot: error: Command failed
Thanks again,
luciant
luciant said:
Thanks GK,
After going into recovery mode, there's the android mascot with the belly open as you describe. Then, I do (VolUp+Pwr) and it produces this screen below, which I'm guessing people call "fastboot". When I'm there, my Win10 PC makes the "USB item attached" noise, and I can use fastboot commands, but adb devices won't show anything. Do you have any ideas?
I thought I could use the fastboot access I have to flash twrp, but I get the following error. I switched the "OEM Unlock" toggle, but i'm guessing that doesn't mean anything until I unlock the bootloader in recovery (which necessitates deleting all the files). I followed the directions on the twrp website which claim that root isn't needed, but I guess unlock is.
Thanks again,
luciant
Click to expand...
Click to collapse
You need to be in recovery for adb to work. The Android with belly open is recovery but you need to unlock it with a button combo. Fastboot won't work unless you unlocked the bootloader.
I may have the steps a little off for getting to recovery but I'm sure searching how to boot to recover for the Nexus 9 will find you the right steps. It's been a long time since I've used the stock recovery on this tablet.
For future bootloopers: Well in the end, I wasn't able to figure out how to pull files using the stock HTC Nexus 9 recovery. Since it was locked, I wasn't able to install or execute TWRP .img , and unlocking it meant losing the files. It was weirdly looping even in Recovery & Fastboot. I tried every mode, and different drivers in the device manager, but ADB couldn't connect. Maybe it's not meant to for security purposes.
If you're bootlooping even in recovery, try the following:
I gave up on trying to recover the data, and decided to just unlock the bootloader. booted to Fastboot (Pwr+Vol Down on start up, select Recovery, Pwr+Vol Up, should say "Fastboot") Then I used fastboot oem unlock, which unlocked the bootloader and Deleted ALL DATA. Then, I could flash TWRP, using fastboot flash recovery twrp.img. Once I flashed TWRP, I booted to twrp recovery using Pwr+Vol Up at boot, wiped all partitions. Then I went to TWRP Advanced -> ADB sideload. Issued adb sideload ota.zip, and this gave me a clean stock install.
Thanks gk for your advice.

help with whatever i have done

disclaimer - sorry i really have no idea what i am doing and my goal is to just go back to my normal phone
my phone is poco f1 and now i can only access fastboot and this "powered by android" screen. fastboot into twrp doesnt work because of "boot command is not allowed in lock state" error
hello all so i tried rooting my phone and then realized that its going really badly (i have a more details about it down) so i decided to flash stock rom using techno treatment's tutorial on it but along the way i have faced a couple of problems - when trying to install drivers, program crashes, and others below
first time i flashed i got an error (timeout error in logs) , so i tried to flash again but this time i left it open for some time (at around 500 seconds i pressed flash again, in logs it shows that flashing already started) and when i came back it was at 12000 seconds still flashing so i closed miflash and am flashing once again but with a shorter folder path (desktop\xiaomi\firmware).
after this i deleted 2 lines in flash_all.bat because i kept getting stuck on echo mismatching image and device. after this everytime i try to flash i get this error - error:Erasing 'boot' FAILED (remote: 'Erase is not allowed in Lock State')
and also error:Erasing 'boot' FAILED (remote: 'Erase is not allowed in Lock State') in the other log file
and after this i tried to go into fastboot but noticed that the fastboot logo is different, it was a bunny with a hat repairing android robot but now it is android robot repairing itself
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(this is what it looks now)
what i did before flashing stock - sorry my memory isnt the best this is all in a span of around 5 hours and my phone is pocophone f1. so at first i followed munchys tutorial on how to root, i succesfully enabled bootloader then in twrp i flashed recovery with some errors like failed to mount /system and 3 others like this but i ignored and continued then i installed magisk and after that in the video he goes into his phone no problem but i had "no os" and i think i just clicked around like backing up, restoring and wiping. then i thought i need a rom because its an os right? so i installed lineage and that was the last time when i could put files into my phone through usb. then i flashed the zip and after that rebooted and got "cant load android system, your data may be corrupt" so i pressed format something like that and did it a few times (i think this is when i couldnt put my files) until eventually saw that its no use so i went back to twrp and again clicked around until eventually wiping everything now i have no os and i cant transfer anything through usb.
Hi @medioqre
Seems like you are in locked bootloader state. You can not flash any ROM with locked bootloader unless you are enter EDL mode. See youtube tutorial to access edl mode for Beryllium
khusika said:
Hi @medioqre
Seems like you are in locked bootloader state. You can not flash any ROM with locked bootloader unless you are enter EDL mode. See youtube tutorial to access edl mode for Beryllium
Click to expand...
Click to collapse
Hi, to confirm - entering edl mode requires me to open up my phone right? how would i do that and how would i close it up after?
Thank you!
medioqre said:
Hi, to confirm - entering edl mode requires me to open up my phone right? how would i do that and how would i close it up after?
Thank you!
Click to expand...
Click to collapse
That's right, but i recommend go to the service center if you aren't able to do it.
khusika said:
That's right, but i recommend go to the service center if you aren't able to do it.
Click to expand...
Click to collapse
Hi again, its been 10 days.
so i have not went to a service center yet, because my city is too small for that. But i have a question. i didnt do anything else with my phone but today i decided i could do something and i booted it and i found out i can access fastboot mode and recovery mode, and in here i can see -
main menu, mi-recovery 3.0
and this one option
"connect with miassistant" which just gives me a picture of a phone if its plugged or unplugged with usb and under theres is a link to this website pcsuite.mi.com which doesnt work.
does this change my situation?
medioqre said:
Hi again, its been 10 days.
so i have not went to a service center yet, because my city is too small for that. But i have a question. i didnt do anything else with my phone but today i decided i could do something and i booted it and i found out i can access fastboot mode and recovery mode, and in here i can see -
main menu, mi-recovery 3.0
and this one option
"connect with miassistant" which just gives me a picture of a phone if its plugged or unplugged with usb and under theres is a link to this website pcsuite.mi.com which doesnt work.
does this change my situation?
Click to expand...
Click to collapse
If you are still in locked bootloader, you can't write firmware through fastboot or recovery
Why don't you try unlocking the bootloader officially?

Categories

Resources