i have sony ericsson's x10 mini rooted xrecovery installed, unlocked bootloader,custom rom cm7 ginger dx v17.
So my problem is that i had have forgotten to back up my 2.1 update-1 of stock rom and now i want it back.
And after installing these recovery image will i be able to use the SEUS and PC COMPANION for the update/flashing to stock.
And sorry if I mistakenly started this thread as I didn't find any thread or post on this... and bear with my english.....
XGr7078 said:
i have sony ericsson's x10 mini rooted xrecovery installed, unlocked bootloader,custom rom cm7 ginger dx v17.
So my problem is that i had have forgotten to back up my 2.1 update-1 of stock rom and now i want it back.
And after installing these recovery image will i be able to use the SEUS and PC COMPANION for the update/flashing to stock.
And sorry if I mistakenly started this thread as I didn't find any thread or post on this... and bear with my english.....
Click to expand...
Click to collapse
I don't have xrecovery but cwm with na 11 and minicm7 2.1.9 rom, but I don't think you have any trouble in going back to stock rom, because I did it some time ago, just turning off your phone, opening pc companion in your computer, and selecting repair option... then follow the instructions and you'll have your phone with stock rom and kernel again!! but take into account it will remain rooted and with bootloader unlocked...
good luck!!
yomiguy said:
I don't have xrecovery but cwm with na 11 and minicm7 2.1.9 rom, but I don't think you have any trouble in going back to stock rom, because I did it some time ago, just turning off your phone, opening pc companion in your computer, and selecting repair option... then follow the instructions and you'll have your phone with stock rom and kernel again!! but take into account it will remain rooted and with bootloader unlocked...
good luck!!
Click to expand...
Click to collapse
Doesn't work.
Here's the screen shot.
with pc companion did you chose update then repair? try using flashtool if you still have problems with seus
yomiguy said:
I don't have xrecovery but cwm with na 11 and minicm7 2.1.9 rom, but I don't think you have any trouble in going back to stock rom, because I did it some time ago, just turning off your phone, opening pc companion in your computer, and selecting repair option... then follow the instructions and you'll have your phone with stock rom and kernel again!! but take into account it will remain rooted and with bootloader unlocked...
good luck!!
Click to expand...
Click to collapse
demoniacs said:
with pc companion did you chose update then repair? try using flashtool if you still have problems with seus
Click to expand...
Click to collapse
Yes. how to use flashtool. I mean I know how to use but does not know how to repair phone using flashtool..........the option doesn't come up in 0.2.9.1 version.....
but thanks n.e.way
XGr7078 said:
Doesn't work.
Here's the screen shot.
Click to expand...
Click to collapse
ohh!! that's strange!! i'm afraid i cant help then... try asking in matmutan faq...
good luck!!
Related
Hi there, how can i return to android 2.1 on my x10 mini? i'm using gingerdx v17 and nAa kernel v4, i tried SEUS and there is no install anyway button , can someone help me?
In SEUS try to update your phone and then SEUS propose you an update wich is in fact the last official version so 2.1...
jujuc said:
In SEUS try to update your phone and then SEUS propose you an update wich is in fact the last official version so 2.1...
Click to expand...
Click to collapse
i cant there is just an exit button i cant update..
Did you try with PC companion instead of SEUS.
jujuc said:
Did you try with PC companion instead of SEUS.
Click to expand...
Click to collapse
Are you sure about this? Because I'm using a custom rom and kernel, is it safe?
Sent from my X10mini using XDA App
I doubt that either SEUS or PC Companion will detect the phone on a custom kernal, and I would also say the chance is high of bricking your phone if it did try and update.
Safest way would be reload back to stock kernal and perform a repair in PC Companion update which will load back stock rom. Not sure if you need to relock your bootloader for this to work..
REMEMBER DO NOT RE-LOCK BOOTLOADER ON CUSTOM KERNAL AS THIS WILL BRICK YOUR PHONE!!
RyanMJ said:
I doubt that either SEUS or PC Companion will detect the phone on a custom kernal, and I would also say the chance is high of bricking your phone if it did try and update.
Safest way would be reload back to stock kernal and perform a repair in PC Companion update which will load back stock rom. Not sure if you need to relock your bootloader for this to work..
REMEMBER DO NOT RE-LOCK BOOTLOADER ON CUSTOM KERNAL AS THIS WILL BRICK YOUR PHONE!!
Click to expand...
Click to collapse
Thanks I'll try that
Sent from my X10mini using XDA App
Use SEMC Update, or flashtool. Just search.
lthy31 said:
Hi there, how can i return to android 2.1 on my x10 mini? i'm using gingerdx v17 and nAa kernel v4, i tried SEUS and there is no install anyway button , can someone help me?
Click to expand...
Click to collapse
Try follow this tut [TUT] un-brick for n00bs.
It takes you step by step (screen shots) all the way from where ever you are to stock ROM.
SEUE is the best way to flash 2.1 original firmware ...
Hello people !
I rooted my xperia x10 mini pro ! and was trying to flash the mini cm7 ! i flashed it via xrecovery, then i rebooted my device and now it is stuck on sony ericson logo ! what do i do now ? the phone isnt going in recovery too ! Please help me
where can i get the stock firmware nd can i flash it without going in the recovery ?
thanks in advance
tried SEUS? also why u used xrecovery? minicm7 uses cwm.
xp3rto said:
Hello people !
I rooted my xperia x10 mini pro ! and was trying to flash the mini cm7 ! i flashed it via xrecovery, then i rebooted my device and now it is stuck on sony ericson logo ! what do i do now ? the phone isnt going in recovery too ! Please help me
where can i get the stock firmware nd can i flash it without going in the recovery ?
thanks in advance
Click to expand...
Click to collapse
Whilst your concerns are valid, you have posted this thread in the wrong forum. This doesn't belong in the dev forums, it belongs in the the Question and Answer forums here: http://forum.xda-developers.com/forumdisplay.php?f=1152
P.S. xRecovery is pretty much redundant now for roms higher than Android 2.1 eclair, as ClockWordMod (CWM) Recovery is what everyone uses. There is a .zip you can flash in xRecovery which upgrades the recovery to CWM recovery which will be the recovery you need to install mini cm7, (however if what you say is true, that the moment you turn your phone on and repeatedly press back it doesn't enter xRecovery, then you will need to use Sony Ericsson Update Service or PC Companion or the Sony Ericsson website software page to repair your phone, then you will need to root your phone again and install xRecovery) ; here is that .zip that upgrades your xRecovery to CWM recovery: View attachment CWM3_for_xReC.zip Good luck
and don't post questions in the development forum again! Post them here instead please! : http://forum.xda-developers.com/forumdisplay.php?f=1152
nightwing369 said:
Whilst your concerns are valid, you have posted this thread in the wrong forum. This doesn't belong in the dev forums, it belongs in the the Question and Answer forums here: http://forum.xda-developers.com/forumdisplay.php?f=1152
P.S. xRecovery is pretty much redundant now for roms higher than Android 2.1 eclair, as ClockWordMod (CWM) Recovery is what everyone uses. There is a .zip you can flash in xRecovery which upgrades the recovery to CWM recovery which will be the recovery you need to install mini cm7, (however if what you say is true, that the moment you turn your phone on and repeatedly press back it doesn't enter xRecovery, then you will need to use Sony Ericsson Update Service or PC Companion or the Sony Ericsson website software page to repair your phone, then you will need to root your phone again and install xRecovery) ; here is that .zip that upgrades your xRecovery to CWM recovery: View attachment 867933 Good luck
and don't post questions in the development forum again! Post them here instead please! : http://forum.xda-developers.com/forumdisplay.php?f=1152
Click to expand...
Click to collapse
Opps em extremely sorry
i tried going in the xrecovery many time ! but the phone dosent go ! well actually this isnt my phone , it it my friend's phone , i own a samsung galaxy note !
Any ways thanks for your help !
ill try what u said
thanks again
s0ftcorn said:
tried SEUS? also why u used xrecovery? minicm7 uses cwm.
Click to expand...
Click to collapse
No i didnt try SEUS !
xp3rto said:
No i didnt try SEUS !
Click to expand...
Click to collapse
do it? you will loose your data but... your phone should work again.
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
s0ftcorn said:
do it? you will loose your data but... your phone should work again.
Click to expand...
Click to collapse
OKay thanx
matthias1203 said:
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
Click to expand...
Click to collapse
ill give this a try too ! thanx
xp3rto said:
ill give this a try too ! thanx
Click to expand...
Click to collapse
ok.. i fixed on my x10mini pro with stock rom flas via flash tool
but if you will again flash some custom rom.. don't touch kernel if you didn't unlock bootloader
you can try later flash some custom rom that doesn't need custom kernel
s0ftcorn said:
do it? you will loose your data but... your phone should work again.
Click to expand...
Click to collapse
i cant find seus ! can you please give me a link from which i can download it ! thank you
matthias1203 said:
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
Click to expand...
Click to collapse
xp3rto said:
i cant find seus ! can you please give me a link from which i can download it ! thank you
Click to expand...
Click to collapse
http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=hr&lc=hr
but I never use that.. only flash tool
matthias1203 said:
http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=hr&lc=hr
Click to expand...
Click to collapse
Thanx bro , i downloaded the seus !
What should i do now , i mean how should i connect the phone !
matthias1203 said:
I think you anyway need custom kernel for that rom..
you can try fix with seus or you can find the stock rom and flash via flashtool
Click to expand...
Click to collapse
basically you need to read the instructions how to install the rom
xp3rto said:
Thanx bro , i downloaded the seus !
What should i do now , i mean how should i connect the phone !
Click to expand...
Click to collapse
i don't know.. i never use that program.. but I think that program is userfrinedly and you will find the way.. if not look for help again.. maybe someone will answer.
do you use x10 mini pro od x10 mini
SEUS ist the Sony Ericsson update stuff of course you can use flashtool, but for somekind of "global reset" i recommend using SEUS.
matthias1203 said:
i don't know.. i never use that program.. but I think that program is userfrinedly and you will find the way.. if not look for help again.. maybe someone will answer.
do you use x10 mini pro od x10 mini
Click to expand...
Click to collapse
x10 mini pro
s0ftcorn said:
SEUS ist the Sony Ericsson update stuff of course you can use flashtool, but for somekind of "global reset" i recommend using SEUS.
Click to expand...
Click to collapse
can u give me instructions how to use the sues
Done
Thanks all of u !! i am very great full to u my phone works now
Hi!
I flashed my X10a using Feralab rom and DomKernel V6 and everything is ok. However, I have to take my X10 to the repairing center because of an old problem in touchscreen. So, I'd like to know how to flash back my X10 with original Sony Ericsson rom and Sony Ericsson Kernel. Where can I find this rom and kernel?
Thanks!
Go look in flashtool thread you will find out ftf files... Download one for your region.... And flash through flashtool
Sent from my X10
Download the original 2.3 release from SE (or rather only S;-) ) install it through PC companion. It will wipe everything though. If you do a backup of your current rom, you can root your phone when you get it back and restore the backup.
Sent from my X10 using xda premium
leopsc said:
Hi!
I flashed my X10a using Feralab rom and DomKernel V6 and everything is ok. However, I have to take my X10 to the repairing center because of an old problem in touchscreen. So, I'd like to know how to flash back my X10 with original Sony Ericsson rom and Sony Ericsson Kernel. Where can I find this rom and kernel?
Thanks!
Click to expand...
Click to collapse
Just use the repair mode in SEUS or PC companion
Ok. Thanks but, will it recovery the original kernel as well? Because I have a backup of the firmware (rom), provided by xRecovery, and when I recovered it, the DomKerel still there..
leopsc said:
Ok. Thanks but, will it recovery the original kernel as well? Because I have a backup of the firmware (rom), provided by xRecovery, and when I recovered it, the DomKerel still there..
Click to expand...
Click to collapse
dont worry kernel will also be stock one
Thanks again, but I tried to use the SEUS and PC Companion. However, both are saying that I've already have the most recent software and I cannot do nothing more. I'm desperate.. I have to leave home and take my X10 tho the repairing center in 1h but I cannot recovery this.. The rom is already recovered, but the kernel no..
What can I do?
Thank you a lot!
try restore mode in it.
If not then there are generic 2.3.3 or 2.1 files in thread flash them through flashtool
kernel are included in them
sorry the only working link I found was for x10i ....
leopsc said:
Thanks again, but I tried to use the SEUS and PC Companion. However, both are saying that I've already have the most recent software and I cannot do nothing more. I'm desperate.. I have to leave home and take my X10 tho the repairing center in 1h but I cannot recovery this.. The rom is already recovered, but the kernel no..
What can I do?
Thank you a lot!
Click to expand...
Click to collapse
Yeah. Flash this ROM via flashtool and after that You will be able to use SEUS, because it's android 2.1
Thanks for everybody! I downloaded a generic firmware and flashed this using Flashtool. Now, both kernel and rom are in the original SE.
Thank you a lot!
glad to hear
Hi, I came from 2.1 baseband M76XX-TSNCJOLYM-53404015. I rooted my x10 mini pro, installed cwm and after that I installed CM7 mini, and now the phone is stuck on the sony ericsson logo. How can I revert this? Is there any metod of flashing original software through windows instead of the recovery on the phone itself?
mrdjibrilo said:
Hi, I came from 2.1 baseband M76XX-TSNCJOLYM-53404015. I rooted my x10 mini pro, installed cwm and after that I installed CM7 mini, and now the phone is stuck on the sony ericsson logo. How can I revert this? Is there any metod of flashing original software through windows instead of the recovery on the phone itself?
Click to expand...
Click to collapse
Which ROM did you choose? If you chose MiniCM7 by nAa it won't work on the stock kernel. You have to either flash a ROM that states to work on stock kernel, or flash the kernel that is recommended by the ROM you chose.
SmG67 said:
Which ROM did you choose? If you chose MiniCM7 by nAa it won't work on the stock kernel. You have to either flash a ROM that states to work on stock kernel, or flash the kernel that is recommended by the ROM you chose.
Click to expand...
Click to collapse
Yes I installed Mini cm but I had no idea about the kernel issue. What should I do now?
mrdjibrilo said:
Yes I installed Mini cm but I had no idea about the kernel issue. What should I do now?
Click to expand...
Click to collapse
If you want to taste GingerBread, go with BPaul's MiniCM7Pro ROM, install it the way you installed MiniCM7, but that one will run on stock kernel. Only downside is that it's a bit slow.
You can speed it up a bit by using These modules.
When you've donwloaded the ROM, open it up with 7-zip or Winrar (don't use the windows native way, it will mess up the proper compression, rendering the ROM unflashable), then navigate to /system/lib/modules and replace the ones in there with the ones from this zip.
After that, install it through CWM onto your phone. Good luck
SmG67 said:
If you want to taste GingerBread, go with BPaul's MiniCM7Pro ROM, install it the way you installed MiniCM7, but that one will run on stock kernel. Only downside is that it's a bit slow.
You can speed it up a bit by using These modules.
When you've donwloaded the ROM, open it up with 7-zip or Winrar (don't use the windows native way, it will mess up the proper compression, rendering the ROM unflashable), then navigate to /system/lib/modules and replace the ones in there with the ones from this zip.
After that, install it through CWM onto your phone. Good luck
Click to expand...
Click to collapse
The problem is I can't access CWM, the phone is stuck on the sony ericsson logo as I've stated above. Can I install any ROM through the pc?
mrdjibrilo said:
The problem is I can't access CWM, the phone is stuck on the sony ericsson logo as I've stated above. Can I install any ROM through the pc?
Click to expand...
Click to collapse
This is true, didn't think about that. The thing is, on the custom kernel used with MiniCM7, CWM is built-in, so there is no need for it to be in the ROM. that is why you lost it. You should be able to just install it again though, but maybe it's best to do a repair with SUS or PC Companion first and then go though the steps again.
SmG67 said:
This is true, didn't think about that. The thing is, on the custom kernel used with MiniCM7, CWM is built-in, so there is no need for it to be in the ROM. that is why you lost it. You should be able to just install it again though, but maybe it's best to do a repair with SUS or PC Companion first and then go though the steps again.
Click to expand...
Click to collapse
I can't boot the phone at all dude, I can't do **** with the companion, what would sus be? Is there any version of odin for SE like there is for samsung?
mrdjibrilo said:
I can't boot the phone at all dude, I can't do **** with the companion, what would sus be? Is there any version of odin for SE like there is for samsung?
Click to expand...
Click to collapse
You're on the SE logo when you boot up the phone, so you CAN do everything with it in regards to repairing firmware (SUS is Sony Update Service, used to be SEUS, Sony-Ericsson Update Service).
And don't be a ****, you've opened a thread here for your problem, and you're getting help, so there is no need in posting the same question again in a different thread.
Look here
SmG67 said:
You're on the SE logo when you boot up the phone, so you CAN do everything with it in regards to repairing firmware (SUS is Sony Update Service, used to be SEUS, Sony-Ericsson Update Service).
And don't be a ****, you've opened a thread here for your problem, and you're getting help, so there is no need in posting the same question again in a different thread.
Look here
Click to expand...
Click to collapse
Sorry but it's not my phone and i went bat**** crazy about this, never happened to me before and i flashed different software on different phones. Thanks for the help thou, you are a good man
mrdjibrilo said:
Sorry but it's not my phone and i went bat**** crazy about this, never happened to me before and i flashed different software on different phones. Thanks for the help thou, you are a good man
Click to expand...
Click to collapse
As long as you don't mess with the bootloader and custom kernels, there is no chance of actually bricking this phone beyond repair There is always a way out.
SmG67 said:
As long as you don't mess with the bootloader and custom kernels, there is no chance of actually bricking this phone beyond repair There is always a way out.
Click to expand...
Click to collapse
Okay, I installed the stock rom through the update service, what would you recommend I do next to get to the mini cm7? Sorry if i'm being a pain in the ass but i would really like to get this working
mrdjibrilo said:
Okay, I installed the stock rom through the update service, what would you recommend I do next to get to the mini cm7? Sorry if i'm being a pain in the ass but i would really like to get this working
Click to expand...
Click to collapse
Take the steps you took to install CWM and then follow my directions in post #4
hi! I have x10 mini e10i and want to install custom rom even if its just running on 2.2 or 2.3.
My phone is 2.1-update 1, rooted, cwm installed but locked bootloader.
I can see some post that you can install custom rom on locked bootloader and stock kernel
Can someone make a "NEW" tutorial on how to install custom rom on locked bootloader on x10 mini e10i (not pro).
Thanks.
jhun12 said:
hi! I have x10 mini e10i and want to install rom. My phone is 2.1-update 1, rooted, cwm installed but locked bootloader.
I can see some post that you can install custom rom on locked bootloader and stock kernel
Can someone make a "NEW" tutorial on how to install custom rom on locked bootloader on x10 mini e10i (not pro).
Thanks.
Click to expand...
Click to collapse
Please use SE tweaker tool to root and install CWM Recovery. SE Tweaker tool (also works on X10 mini): http://forum.xda-developers.com/showthread.php?t=1462278
Then restart your phone and press the back button repeatedly to boot into CWM Recovery. Wipe data/factory reset then flash the ROM that you want.
reply
rootdefyxt320 said:
Please use SE tweaker tool to root and install CWM Recovery. SE Tweaker tool (also works on X10 mini): http://forum.xda-developers.com/showthread.php?t=1462278
Then restart your phone and press the back button repeatedly to boot into CWM Recovery. Wipe data/factory reset then flash the ROM that you want.
Click to expand...
Click to collapse
but im already rooted and have cwm recovery installed. Is that is another way of installing custom rom on locked bootloader?
jhun12 said:
but im already rooted and have cwm recovery installed. Is that is another way of installing custom rom on locked bootloader?
Click to expand...
Click to collapse
You have to use a ROM that supports the stock kernel. So all you do is download a ROM zip and flash CWM Recovery. An example is http://forum.xda-developers.com/showthread.php?t=1201116 It should work on X10 Mini BTW.
reply
I finally installed cm6 on my phone. But i still have problem. It always restarting after the sony ericsson text (not the logo) but sometimes it can open 'til the homescreen but still it will shut down automatically.
I tried pc companion but when i try to connect my phone, its just restarting all over. I thought if I would install a custom rom, it will repair the phone.
What's the difference between flashing the phone via pc companion and installing custom rom via cwm recovery?
jhun12 said:
I finally installed cm6 on my phone. But i still have problem. It always restarting after the sony ericsson text (not the logo) but sometimes it can open 'til the homescreen but still it will shut down automatically.
I tried pc companion but when i try to connect my phone, its just restarting all over. I thought if I would install a custom rom, it will repair the phone.
What's the difference between flashing the phone via pc companion and installing custom rom via cwm recovery?
Click to expand...
Click to collapse
PC companion flashes stock ROM while CWM is used for flashing custom ROMs. I suggest you to use flashtool to flash a stock ROM
reply
i thought if i will replace the old system, it will be fixed.
jhun12 said:
i thought if i will replace the old system, it will be fixed.
Click to expand...
Click to collapse
Flashing the 2.1 FTF with flashtool will reset your whole phone and it should fix your problem. If it doesn't, it means that you have a hardware problem.
can you give me a link of 2.1.1.A.0.6 tft for e10i?
jhun12 said:
can you give me a link of 2.1.1.A.0.6 tft for e10i?
Click to expand...
Click to collapse
Sorry I can't find one. All of them have seem to be deleted
EDIT: Found one: http://www.4shared.com/file/MBqMiM6W/E10i_android_21_updae_1_sridro.html
Just make a random account and you don't need to validate your email address at all.
thanks
me too, i can't find one. thanks for the link.
How about flashtool for x10 mini?
Hope it will fix.
jhun12 said:
me too, i can't find one. thanks for the link.
How about flashtool for x10 mini?
Hope it will fix.
Click to expand...
Click to collapse
Flashtool: https://unrestrict.li/flashtool
reps
can you help me to find a flashable stock 2.1.1.A.0.6 for e10i. Thanks again.
jhun12 said:
can you help me to find a flashable stock 2.1.1.A.0.6 for e10i. Thanks again.
Click to expand...
Click to collapse
I can't find one anymore. Just use the one I gave you on 4shared.
jhun12 said:
can you help me to find a flashable stock 2.1.1.A.0.6 for e10i. Thanks again.
Click to expand...
Click to collapse
Here
reps
SmG67 said:
Here
Click to expand...
Click to collapse
uhm, do you have a link of stock 2.1.1.A.0.6.zip rom which i can use on cwm recovery. or can i use 2.1.1.C.0.0 rom on 2.1.1.A.0.6. I just want to try if it will be fix my phone.
rootdefyxt320 said:
I can't find one anymore. Just use the one I gave you on 4shared.
Click to expand...
Click to collapse
i tried to search there but no luck.
jhun12 said:
uhm, do you have a link of stock 2.1.1.A.0.6.zip rom which i can use on cwm recovery. or can i use 2.1.1.C.0.0 rom on 2.1.1.A.0.6. I just want to try if it will be fix my phone.
Click to expand...
Click to collapse
You can use the 2.1.1.C.0.0 ROM. It was an update for the x10 mini pro in certain areas, but it will run on the x10 mini too, since there is no hardware specific stuff in the ROM itself. You will probably lose root and cwm though when you flash it.
I've got an 'undressed' 2.1.1.A.0.6 I made for myself in zip-format which includes root and cwm, but i took out all the google stuff, so there's no market in it.
If you want to know if your phone is ok, just wipe everything and install the 2.1.1.C.0.0.
SmG67 said:
You can use the 2.1.1.C.0.0 ROM. It was an update for the x10 mini pro in certain areas, but it will run on the x10 mini too, since there is no hardware specific stuff in the ROM itself. You will probably lose root and cwm though when you flash it.
I've got an 'undressed' 2.1.1.A.0.6 I made for myself in zip-format which includes root and cwm, but i took out all the google stuff, so there's no market in it.
If you want to know if your phone is ok, just wipe everything and install the 2.1.1.C.0.0.
Click to expand...
Click to collapse
can you upload it?
2.1.1.A.0.6
Can't find the 2.1.1.C.0.0 anymore