Related
Hi, there are probably numerous questions similar to mine, but I couldn't find the right thread for me.
I recently unlocked my atrix's bootloader, and tried to update to the gingerbread update. Ultimately, I wanted to flash the Alien rom, but the gingerbread update (not the OTA one), caused my phone to be stuck on the Moto logo, so I flashed the 1.2.6 sbf on my phone.
Now, I'm not sure what I should do to update my phone to gingerbread since I read that if I update directly from 1.2.6, I will hard break my phone. What should I do?
By the way, I have been having troubles with an update to 1.8.3 via sbf. It keeps saying that the phone did not enumerate.
Thanks for all the help!!
phillyf8n said:
Hi, there are probably numerous questions similar to mine, but I couldn't find the right thread for me.
I recently unlocked my atrix's bootloader, and tried to update to the gingerbread update. Ultimately, I wanted to flash the Alien rom, but the gingerbread update (not the OTA one), caused my phone to be stuck on the Moto logo, so I flashed the 1.2.6 sbf on my phone.
Now, I'm not sure what I should do to update my phone to gingerbread since I read that if I update directly from 1.2.6, I will hard break my phone. What should I do?
By the way, I have been having troubles with an update to 1.8.3 via sbf. It keeps saying that the phone did not enumerate.
Thanks for all the help!!
Click to expand...
Click to collapse
I'm surprised you aren't already hardbricked.. Use the OTA updates until 1.8.3 (RSD shouldn't be used at all really) and then re-root and unlock whatever using: http://forum.xda-developers.com/showthread.php?t=1182871.
If it did not reenumerate, then all you should do is boot back into RSD and see whether that fixes it.
http://forum.xda-developers.com/showthread.php?t=1163342
this gives stock 2.3.4 without touching bootloader
Hey guys. been following xda since HTC eris. i moved a little to quickly this time and now im stuck...
i will start from the beginning.
I purchased my phone not too long ago (last week) and immediately looked up the gingerbreak. went through the motions and seemed to acquire root (superuser.apk). i then tried using titanium backup. "no root privileges). not thinking, i received a ota notification. i then did it.
in result, i lost root (if i even had it), I've tried slow88lx from rootzwiki rooting program for 2.3.3, and RSD gives me a failure result "failed flashing process. failed flashing process. Unable to retrieve initialization values from INI file. (0x7029); phone connected" so i could sbf back to 2.2.2.
tried threads:[Q] Rooting Question, [Q] Dx2 Cant Root <similar problem, [SBF] Gingerbread SBF for MB870 Verizon Droid X2 [SBF], SBF TUTORIAL (Collection of instructions from various threads), Droid X2 OTA Gingerbread Root Guide <both one click and adb, UPDATED - [HOW-TO] SBF back to stock Froyo, Update to P3Droids Pre-Rooted GB Update, etc....
I am lost in limbo. phone works with all of its stock flaws. plz help.
Try redownloading all the files needed here again. Install and reboot both the phone and ur pc. If on Vista or Win7 right click RSD Lite and select "run as administrator" from the properties menu. If that still doesnt work report back with ur results please.
make sure you are using rsd 5.3. after you reinstall everything on your comp, connect the phone to a different usb port (sometimes that helps). make sure you put the phone in rsd mode. i would use the gingerbread sbf and the new one click root as well if i were you. and make sure you do a factory reset after you sbf.
Thx guys. RSD 5+ did the trick. Flashed to 2.3.3 and ota rooted.
Really appreciate the suggestions.
Sent from rooted X2 ^_^
Thanks for letting us know you got it working!
The one click that droid-life posted for motorola devices worked without a hitch. I tried gingerbreak and had no luck either.
x2 was running stock 2.3, now running eclipse. liking it.
Yes I made a mistake (**** happens) and now when I boot my phone i get "Failed to boot 2"
and it goes into SBF mode. prior to this I was on gingerbread 2.3.4, on bell in canada.
I've seen guides offering a 2.1.1 SBF that can be used to fix a phone, but I'm worried using this will brick my phone since I'm on 2.3.4
I've seen plenty of warnings not to use an ATT SBF, but nothing about using an older bell version.
derkinit said:
Yes I made a mistake (**** happens) and now when I boot my phone i get "Failed to boot 2"
and it goes into SBF mode. prior to this I was on gingerbread 2.3.4, on bell in canada.
I've seen guides offering a 2.1.1 SBF that can be used to fix a phone, but I'm worried using this will brick my phone since I'm on 2.3.4
I've seen plenty of warnings not to use an ATT SBF, but nothing about using an older bell version.
Click to expand...
Click to collapse
why don't you just reflash a 2.3.4 sbf? i wouldn't risk hard bricking your phone; as long as you can get into RSD mode and can flash a sbf with RSD Lite, then you're fixable.
or better yet, reflashing the pudding .sbf (if you're unlocked)
btw, what was the mistake you made? this can help me solve your problem.
there is no 2.3.4 sbf available for bell, and i didnt unlock
my mistake was trying to install CM without unlocking the bootloader, i misread some things, and I'm kicking it myself now.
I did see one thread during my searching of a guy who successfully used an AT&T 2.3.4 SBF on his bell atrix, so I'm contemplating trying that
other than that I can try sending it in and getting the phone repaired (which will most lilely be denied based on me voiding the warranty) and past that, I drop 500 bucks on a new phone, and being a teenager saving for univeristy, thats annoying.
So I loaded up the AT&T sbf in RSD lite, and it wouldnt even let me try to flash it
as a shot in the dark i tried using pudding (IHOP), and it tried, and failed.
pretty much out of ideas at this point, only bell has the sbf my phone truly needs so I'm gonna take it in tomorrow and hope for the best.
Ok, I know there are a lot of posts already on updating to 2.3.6 and root, but there appears to be a lot of different situations and limited information that is causing me some confusion.
So, what I want to do is get some clear details about probably the second most common situation: A Motorola Atrix 4G running the stock ROM with root access and an unlocked bootloader.
With regards to updating, aside from the obvious actions (i.e. TiBu, maybe a Nandroid), is there anything else that needs to be done to perform the update?
Additionally, I would like to keep root/unlocked even with the update, but I am willing to re-do root after the update. I can't find clear information on what methods work to keep root or to restore root after updating.
That is pretty much all that I am trying to do. I can not afford to brick my phone, so I want to make sure that I understand everything before I update.
P.S. Curse Motorola and it's stupid locked bootloaders!
I'm in the same shoes and looking to do the same thing...I want to keep root, not brick my phone...Apply the 141 update. I don't mind a little work (re-root, re-modify some files)
I'm running an unlocked bootloader, AT&T Atrix with 4.5.91 which is rooted with some custom changes (tethering, 2g/3g toggle, unlock APNs, agps)
Seems it could be possible to rebuild Blur_Version_91.4.5.141.MB860ATT.en.US available from Motorola and exclude the bootloader portions to keep the phone from bricking?
psychephylax said:
I'm in the same shoes and looking to do the same thing...I want to keep root, not brick my phone...Apply the 141 update. I don't mind a little work (re-root, re-modify some files)
I'm running an unlocked bootloader, AT&T Atrix with 4.5.91 which is rooted with some custom changes (tethering, 2g/3g toggle, unlock APNs, agps)
Click to expand...
Click to collapse
Yeah, I used the script that applied the tethering/hotspot tweak. That's about it. I haven't had to use any agps or anything, it's got amazing gps as it is.
Glad I'm not the only one though
If you have a stock rom unlocked bootloader with root don't do the ota update.I just soft bricked my phone.
Sadly, I did just that. I just wasn't paying attention.
Update: resorted to a factory reset. Now I have 2.3.6 running. Just going to take some time to restore my apps and settings.
Looks like I'm in the same boat. What's the best way to recover from a soft-brick in this situation?
thatguy193 said:
If you have a stock rom unlocked bootloader with root don't do the ota update.I just soft bricked my phone.
Click to expand...
Click to collapse
Yeah, this is exactly why I have asked. I read at least one post somewhere where someone tried both the SD Card and the OTA update and the SD didn't work, but the 2nd OTA try did. I don't know if they said they had unlocked or not.
Johnston212 said:
Yeah, this is exactly why I have asked. I read at least one post somewhere where someone tried both the SD Card and the OTA update and the SD didn't work, but the 2nd OTA try did. I don't know if they said they had unlocked or not.
Click to expand...
Click to collapse
Well I found this threadhttp://forum.xda-developers.com/showthread.php?t=1498856 was trying the auto updater as suggested but my phone wont stay on long enough for it to work.It does the auto shutdown and tries re-installing the OTA update which gives me the android triangle guy.
I recently made an update of my Atrix 4G's System from 2.3.4 to 2.3.6.
My 2.3.4 version was unlocked and rooted. It is on ATT.
Initially I received a notification in my phone about the new System update available. I tried three times OTA, but each time the process failed. When it was booting up always gave me the Android Icon with an Exclamation mark inside of a triangle. But nothing else happens. My phone continued working but with the 2.3.4 version.
Then I went to this page:
Because I haven't less than 8 post in this site I can't post any URL.
But, go for the "Motorola software update" in the Motorola's web page or Google it and get it.
And installed the "Motorola Software update" application. I had to restart my PC in order to make the software to recognize and connect to my Atrix 4G. When the Atrix was connected, by USB port, I had to select the "Windows media Sync" in the USB connection options list to make the connection to work.
Then, all that I had to do was wait until the process got completed.
I hadn't see nothing different with the new update.
I conserved my "unlocked" condition but I lost my "Rooted" condition. But that is not a big issue, there are several thread in the web that help you to get rooted again.
Hope this can help, It works for me.
cjfermin said:
I conserved my "unlocked" condition but I lost my "Rooted" condition. But that is not a big issue, there are several thread in the web that help you to get rooted again.
Hope this can help, It works for me.
Click to expand...
Click to collapse
You have an unlocked bootloader? Or sim-unlocked phone?
I'm in the same situation of @cjfermin and the 2.3.6 was flashed without any problem.
Of course I've lost ROOT, but I've followed simple instructions on the web (using Fasboot) and I've re-rooted the Atrix in 3 minutes.
PS: my Atrix was/is sim-unlocked and with unlocked bootloader.
emandt said:
I'm in the same situation of @cjfermin and the 2.3.6 was flashed without any problem.
Of course I've lost ROOT, but I've followed simple instructions on the web (using Fasboot) and I've re-rooted the Atrix in 3 minutes.
PS: my Atrix was/is sim-unlocked and with unlocked bootloader.
Click to expand...
Click to collapse
Thanks, that is exactly what I was needing to find out. I've heard yes and no's on different re-rooting methods. Could you link the one that you used? I was thinking about using Gingerbreak or OneClickRoot
I was trying to apply the OTA 4.5.141, on my rooted AT&T Motorola Atrix stock rom 2.3.4 and after the first reboot, following the instructions from the update, I am getting the message “failed to boot 2 starting rds mode” and just sit there. After removing the battery and booting up again, the phone seems to booting up normally and then when the phone finishes loading most of the widgets, I get a message saying “turning off” and the same cycle keeps repeating.
This is my primary phone and I am really desperate right now and I do not know what to do.
Please I need some help,
Johnston212 said:
Could you link the one that you used?
Click to expand...
Click to collapse
Here: http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
Hope that helps you!
Alverik said:
I was trying to apply the OTA 4.5.141, on my rooted AT&T Motorola Atrix stock rom 2.3.4 and after the first reboot, following the instructions from the update, I am getting the message “failed to boot 2 starting rds mode” and just sit there. After removing the battery and booting up again, the phone seems to booting up normally and then when the phone finishes loading most of the widgets, I get a message saying “turning off” and the same cycle keeps repeating.
This is my primary phone and I am really desperate right now and I do not know what to do.
Please I need some help,
Click to expand...
Click to collapse
Ok, is your bootloader unlocked as well? I googled the "failed to boot 2 starting RSD mode" that you mentioned and there are a number of posts on it from over the years. It seems that you may need to flash a SBF file, but I don't know enough about your situation to competently tell you more than that.
Johnston212 said:
Ok, is your bootloader unlocked as well? I googled the "failed to boot 2 starting RSD mode" that you mentioned and there are a number of posts on it from over the years. It seems that you may need to flash a SBF file, but I don't know enough about your situation to competently tell you more than that.
Click to expand...
Click to collapse
I am on stock rom 2.3.4 and have only rooted my phone nothing else. It seems that because it was a rooted phone the update could not finish the process.
Now I don’t know what to do.
Should I try to flash to 2.3.4 using RDS lite and then update using OTA 4.5.141 or flash using 4.5.141 (I don’t know where to find it)?
Help please, this is my only phone.
Alverik said:
I am on stock rom 2.3.4 and have only rooted my phone nothing else. It seems that because it was a rooted phone the update could not finish the process.
Now I don’t know what to do.
Should I try to flash to 2.3.4 using RDS lite and then update using OTA 4.5.141 or flash using 4.5.141 (I don’t know where to find it)?
Help please, this is my only phone.
Click to expand...
Click to collapse
If the only thing you've ever done to the phone is root then flashing the official 2.3.4 (not fruitcake) with RSDlite and then applying the 141 OTA update should be ok. Things to note:
1) Make sure the phone is fully charged
2) Apply the 141 OTA update from sd card. Go to motorola's website . I've had mixed results when applying previous updates when downloading over wifi.
3) Be VERY sure you've done nothing else to your phone other than root, i.e. unlock, mess with the bootloader and/or recovery (unlock, ROMs).
gnahc79 said:
If the only thing you've ever done to the phone is root then flashing the official 2.3.4 (not fruitcake) with RSDlite and then applying the 141 OTA update should be ok. Things to note:
1) Make sure the phone is fully charged
2) Apply the 141 OTA update from sd card. Go to motorola's website . I've had mixed results when applying previous updates when downloading over wifi.
3) Be VERY sure you've done nothing else to your phone other than root, i.e. unlock, mess with the bootloader and/or recovery (unlock, ROMs).
Click to expand...
Click to collapse
The only thing that I have done other than rooting my phone it’s unlocking the sim card.
I don't have a SIM unlocked phone, so I can't with 100% certainty say you will be ok. You should be fine though. Maybe others with SIM unlocked phones will chime in.
gnahc79 said:
I don't have a SIM unlocked phone, so I can't with 100% certainty say you will be ok. You should be fine though. Maybe others with SIM unlocked phones will chime in.
Click to expand...
Click to collapse
I am not able to copy the update file to the SD card because I get a message saying “turning off” a little bit after the phone loads the sd card and then I get the "failed to boot 2 starting RSD mode" and after that the only way to take it out of that mode, it’s by removing the battery.
What options do I have now?
Thank you,
is there an one click root 2.3.6 for the atrix? I tried the 2 programes but none of them seemed to work?
Same question here, thanks
http://briefmobile.com/motorola-atrix-4g-root
works for me with a locked bootloader.
There's also a voodoo root method that saves root before the update and restores root after the update.
gnahc79 said:
http://briefmobile.com/motorola-atrix-4g-root
works for me with a locked bootloader.
There's also a voodoo root method that saves root before the update and restores root after the update.
Click to expand...
Click to collapse
ok so now I screwed up and I am getting
svf 108 1:2
failted to boot 3
You got a failed to boot 3 using the fastboot preinstall method?? At which step did you get the error
Sent from my MB860 using XDA App
Ok, I'm on 2.3.4 and rooted using the instructions from brief mobile. I don't believe I have an unlocked bootloader. The only things I have done to the phone were original script from here for rooting (not one click), and then a modified version of it after the first Atrix update which had a before update and after update script to run.
Then, when upgrading to 2.3.4, I used the brief mobile/fastboot method to root it.
So, am I correct in thinking that to update the phone now I need to:
1. Download the update installer from Motorolla and update the phone to 2.3.6? (am I right that I the OTA update won't work or could cause a problem????)
2. Follow the instructions at Brief Mobile to root the phone.
Is this right, or should I wait a while before upgrading for things to be sorted out? The message popping up is irritating, but I can live with it if it avoids bricking my phone or having other problems.
Thanks
[Q] rooting help on 2.3.6
what is the proper way to root without unlocking the bootloader on 2.3.6 att?
http://briefmobile.com/motorola-atrix-4g-root
It still works
hdblab said:
http://briefmobile.com/motorola-atrix-4g-root
It still works
Click to expand...
Click to collapse
+1
Sent from my MB860 using XDA App
Root 2.3.6 one click
can someone upload a script or program that is one click root (not unlock) att atrix using 2.3.6?
http://forum.xda-developers.com/showthread.php?t=1505900
http://forum.xda-developers.com/showthread.php?t=1502735
http://forum.xda-developers.com/showthread.php?t=1500819
The preinstall method is real easy. If that is too challenging then maybe you should wait for someone to volunteer to provide a 1-click/batch script on their own rather than requesting(demanding) it.
sillyshyme said:
can someone upload a script or program that is one click root (not unlock) att atrix using 2.3.6?
Click to expand...
Click to collapse
I tried that before and I got soft booted.
Try again by using the instructions from the "Android-advice" website.
http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
Note: In those instructions specifically, it is important clarify that the phone should be in "fastboot" before entering in commands. Basically, do "step 6" before "step 4".
sillyshyme said:
I tried that before and I got soft booted.
Click to expand...
Click to collapse
do you need to undo the root on 2.3.4 before you upgrade to 2.3.6?
przemeknzb said:
do you need to undo the root on 2.3.4 before you upgrade to 2.3.6?
Click to expand...
Click to collapse
yes
btw, before you unroot 2.3.4. can you check if you have su, dosu and superuser.apk in /system/preinstall/ ? I'm not sure if I had those files when I was on 2.3.4, but I see them now on 2.3.6. I only removed the su related files as listed in the link when I was on 2.3.4, never removed su, dosu, etc from system/preinstall...guess it's not necessary for the 2.3.6 OTA to be successful on a locked bootloader.
I just rooted my Atrix after the OTA to 2.3.6 using this method. Worked perfect.
http://androidadvices.com/root-motorola-atrix-4g-45141-gingerbread-236-firmware/2/
no not had any of those files
tnedator said:
Ok, I'm on 2.3.4 and rooted using the instructions from brief mobile. I don't believe I have an unlocked bootloader. The only things I have done to the phone were original script from here for rooting (not one click), and then a modified version of it after the first Atrix update which had a before update and after update script to run.
Then, when upgrading to 2.3.4, I used the brief mobile/fastboot method to root it.
So, am I correct in thinking that to update the phone now I need to:
1. Download the update installer from Motorolla and update the phone to 2.3.6? (am I right that I the OTA update won't work or could cause a problem????)
2. Follow the instructions at Brief Mobile to root the phone.
Is this right, or should I wait a while before upgrading for things to be sorted out? The message popping up is irritating, but I can live with it if it avoids bricking my phone or having other problems.
Thanks
Click to expand...
Click to collapse
1) unroot 2.3.4 first:
http://androidforums.com/atrix-4g-all-things-root/423259-best-way-unroot.html
2) apply the 2.3.6 OTA update
3) redo the fastboot preinstall root method
btw before you unroot 2.3.4 can you check to see if you have su, dosu and superuser.apk in /system/preinstall? I see it now in 2.3.6 and am not sure if I had it there back when I was on 2.3.4
I didn't unroot before updating to 2.3.6 and now I can't get it to work. I keep getting the error "cp: write error: No space left on device", what should I do now?
Thanks.
sillyshyme said:
is there an one click root 2.3.6 for the atrix? I tried the 2 programes but none of them seemed to work?
Click to expand...
Click to collapse
what i did ...
UPDATE FROM STOCK 4.2.91 UNLOCKED BOOTLOADER AND ROOTED ATRIX 4G
try using OTA keeper from the market , before trying the OTA update , this is what i did
1 ) i unlocked my atrix 4g (2.3.4 all stock) with AUTOMATIC_UNLOCK_V4.2 and rooted with PetesMotorolaRootTools_v1.07 after that i installed CWM recovery
2 ) Make a Full backup of you rom using CWM and Titaniumbackup (never is enough)
3 ) MANY people say that using RSD LITE is not good , i just take the risk , because anyways the touch of my atrix is not doing good so i will be sending it to warranty soon anyways , i take the risk , i flash my atrix with RSD Lite 5.5 and this sbf
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
i don´t know any other people but i did not loose any data or apps from my atrix it was everything there , unlocked sign erased , CWM recovery partition erased , ROOT was there it is like everything go back to stock ... almost everything my data part was untoched.
4 ) download from the market OTA Root Keeper make a backup of your root and then press unroot temp
5 ) with that done I started to download and install the OTA update
6 ) after this point the phonewill reboot to stock recovery mode and start to upgrade it took almost 10 min to do the update after finishing copying files, it restarted 2 times on the moto logo then started booting , it take a longtime to pass the att boot image be patience mine took almost 5 min after that the phonestarted with everything loaded my apps , photos videos etc.
I think this could be a workaround (it work for me) for updating to .141 , also the baseband was updated to N_01.77.37P_usa_att
The only thing that was untoched was the webtop part , it stays on WT 1.2, ireally don´t use it , but i think if im already on 2.3.6 i can RDS the full SBF to get Webtop upgraded also the kernel say 2.6.32.9 is that the correct kernel for 2.3.6 i read that kernel is for a Froyo sbf not pretty sure
The thing now is , i wanna try installing CWM recovery and see if im already "unlocked" and try fruitcakes to downgrade 2.3.4 but i am not pretty sure about this i think i will get a brick
Also , you can try investigate to downgrade of wait for a generous dev to take out of the oven the fruitcake for 2.3.6 and try the method above
I TAKE no responsibility with this mini-tuto for anything that could happen to your atrix it on you own do this , i take the risk and it works !!!
thanks everyone