Hello to all!!! After a long time spent on this forum and on google searching solutions to my problem i didn't find anything yet. I have updated my SGA with Kies to ver.2.3.6 build XWKT7 and tried to root again failing.... some videos on youtube.com assure that i can root my phone with "upd_1.zip" package used also in 2.3.3/2.3.4/2.3.5 versions, result the following code:
Code:
Opening update package....
installing update...
assert failed: getprop("ro.product.device") == "GT-S5830" || getprop("ro.build.product") == "GT-S5830" || getprop("ro.product.device") == "GT-S5570" || getprop("ro.build.product") == "GT-S5570" || getprop("ro.product.device") == "GT-S5670" || getprop("ro.build.product") == "GT-S5670" || getprop("ro.product.device") == "GT-B7510" || getprop("ro.build.product") == "GT-B7510"
E:Error in sdcard/upd_1.zip (Status 7)
Installation aborted.
Also tried with DoomLord's Zerglings exploit but failed (Hellions with BLUE flames), anyone could help me? is there the possibility to root again the device?
I have the exact same problem. Any solution yet?
root
Hey Guy`s... i have tiered an rom and flsh it via odin... soo no root probs... or take te cwm and install it.. it must bee root after install..
else
use root prog... there are many in these forum..
good luck..
Related
I cannot boot into my rom but I can boot into CWM however when i try to flash a rom i get this read out:
assert failed: getprop("ro.product.device") == "x10i" || getprop("ro.build.product") == "x10i" || getprop("ro.product.board") == "x10i" || getprop("ro.product.device") == "x10a" || getprop("ro.build.product") == "x10a" || getprop("ro.product.board") == "x10a" || getprop("ro.product.device") == "es209ra" || getprop("ro.build.product") == "es209ra" || getprop("ro.product.board") == "es209ra"
E:Error in /sdcard/update-cm-7.1.0-xperia-x10i-KANG-signed.zip
(status 7)
Installation aborted
What have I done wrong?
flash the stock rom - format sdcard on the phone (dont forget backup), and then once more again.
Quercus1 said:
flash the stock rom - format sdcard on the phone (dont forget backup), and then once more again.
Click to expand...
Click to collapse
Ta for the help do i flash stock ROM using flashtool then if CWM is bust?
yes - make your phone "virgin"
sorted almost worried for a sec there, nice to know the XDA communities always there for a noob
Hi,
I just tried to install this rom on my i9100p (the one with NFC) but failed the initial test... looks like it can be installed only on plain 9100, 9100M and T but not P... why is that? i've read that apart from the NFC it's just the same (in fact i had no problem installing CWM and after that when the phone boots it says i9100)...
i tried to search for the piece of code that it show on the screen as an error, but unfortunately I couldn't find where it is... the error is:
assert failed: getprop("ro.product.device") == "galaxys2" || getprop("ro.build.product") == "galaxys2" || getprop("ro.product.device") == "i9100" || getprop("ro.build.product") == "i9100" || getprop("ro.product.device") == "i9100M" || getprop("ro.build.product") == "i9100M" || getprop("ro.product.device") == "i9100T" || getprop("ro.build.product") == "i9100T"
so it should be matter of adding a couple ORs and voila... or maybe is there a way to change my model name somewhere?
Mmm some info. here, maybe help http://forum.xda-developers.com/showthread.php?t=1465816
GaboWinter said:
Mmm some info. here, maybe help http://forum.xda-developers.com/showthread.php?t=1465816
Click to expand...
Click to collapse
wel thank you, it did help, cause i understood that i had to modify the updater-script!
but now i get another error it just says error in .zip and (status 6), before it was status 7...
but i'm not really sure if i'm doing it correctly... when i'm in recovery mode, i go to install zip from sdcard->choose zip from sdcard and then i choose update-cm-9...zip
instructions only say "flash cm9"...
i have rooted the phone with CWS and nothing else...
Hi every one
i've got a SE wt19i
currently i'm trying to install a new ROM into my phone, but all the ROM's i've tryied give me the error message (STATUS 7)
I always install the new kernel that comes with the rom file but now i'm stuck on this issue....
i can't even rollback the installation.....
here's an output:
Code:
Preparing filesystem...
about to run program [/tmp/backuptool.sh] with 2 args
grep: /system/build.prop: No such file or directory
Not backing up files from incompatible version.
run_program: child exited with status 127
Installing LwW files
script aborted: assert failed: getprop("ro.product.device") == "WT19i" || getprop("ro.build.product") == "WT19i" ||
getprop("ro.product.device") == "WT19a" || getprop("ro.build.product") == "WT19a" ||
getprop("ro.product.device") == "coconut" || getprop("ro.build.product") == "coconut"
assert failed: getprop("ro.product.device") == "WT19i" || getprop("ro.build.product") == "WT19i" ||
getprop("ro.product.device") == "WT19a" || getprop("ro.build.product") == "WT19a" ||
getprop("ro.product.device") == "coconut" || getprop("ro.build.product") == "coconut"
Installer Error (Status 7)
So for my point of view :
grep: /system/build.prop: No such file or directory ---------> IS THIS CORRECT?
Not backing up files from incompatible version.
run_program: child exited with status 127
Thanks all
i figured it out, problem solved.
Here's the solution:
- problem is on "/system/build.prop (file is missing, therefore CWM can't install custom ROMS because there's no device information)
- Install SE stock ROM (WT19i GB_4.0.2.A.0.58_1254-1868 (CUSTOMIZED UK WORLD I)) using flash tools
- install custom kernell & rom (FXP139 + CM9.1)
everything is working now
:good:
Hi everyone,
Im using a Xperia Neo and have flashed the CM10-Kernel with Flashtool.
When i try to install the Rom I get the Message :
assert failed: getprop("ro.product.device") == "MT15i" || getprop("ro.build.product") == "MT15i" ||
getprop("ro.product.device") == "MT15a" || getprop("ro.build.product") == "MT15a" ||
getprop("ro.product.device") == "hallon" || getprop("ro.build.product") == "hallon";
E:Error in sdcard/CM10/FXP141_cm-10-20121007-UNOFFICIAL-hallon.zip
(Status 7)
Installation Aborted
I read that i should delete all getprop lines from the update script. Now i get this message:
E:Error sdcard/CM10/cm10getprop.zip
(Status 6)
Installation Aborted
I redownloaded the file but the Installation still gets aborted.
Does anyone know how to solve this?
Thank you in advance!
Akiix said:
Hi everyone,
Im using a Xperia Neo and have flashed the CM10-Kernel with Flashtool.
When i try to install the Rom I get the Message :
assert failed: getprop("ro.product.device") == "MT15i" || getprop("ro.build.product") == "MT15i" ||
getprop("ro.product.device") == "MT15a" || getprop("ro.build.product") == "MT15a" ||
getprop("ro.product.device") == "hallon" || getprop("ro.build.product") == "hallon";
E:Error in sdcard/CM10/FXP141_cm-10-20121007-UNOFFICIAL-hallon.zip
(Status 7)
Installation Aborted
I read that i should delete all getprop lines from the update script. Now i get this message:
E:Error sdcard/CM10/cm10getprop.zip
(Status 6)
Installation Aborted
I redownloaded the file but the Installation still gets aborted.
Does anyone know how to solve this?
Thank you in advance!
Click to expand...
Click to collapse
Search in the cm10 thread and on the github, solution already exists, you just need to search.
Goto the cm10 thread and use the search button to search for "status 7"
my mobile is "htc wildfire s" and it has rooted.. now i am trying to install new rom to my mobile. i tried to install two latest roms but it doesn't complete successfully. An error message is showing -"script aborted: assert failed: getprop("ro.product.device") == "marvel" || getprop("ro.build.product") == "marvel"
assert failed: getprop("ro.product.device") == "marvel" || getprop("ro.build.product") == "marvel"
Installer Error (Status 7)"
can anybody help me why this happening..