i have wet dream 1.4.4 and i flashed with elite 1.4ghz over the current 1.45ghz now the phone freezes alot, reboot loops.. how can i revert that ?
Flash fuax123s 1.45 OC unified kearnel easily be found in the ATRIX 4g development page
Don't forget to thank and gl
Sent from my ics+darkside multiboot mb860 using xda premium
thanks does this mean its not compatible or i cant go higher or what?
There are 1.6GHz overclocks out there right now so it isn't an issue of speed, but it may have just been a bad flash or there could be something else with the build you are using and the kernel's problems are un-related.
I wouldn't worry, but just flash a new kernel and give it a go. You can always go back.
antmiu2 said:
thanks does this mean its not compatible or i cant go higher or what?
Click to expand...
Click to collapse
The problem is that is wasn't compatible WD is a AT&T build so use faux123 kernels and the elite that you were flashing is for cm7 builds this is a problem btwn AT&T and international for example I own international and to use old WD I had to either flash a unified kernel or use the "Ramfix" b4 it would run on mine but feel free to play around with it maybe try using the elite with the "Ramfix" let me know if that works just keep a backup of the working kernel so you can always go back and you'll be fine gl
Sent from my ics+darkside multiboot mb860 using xda premium
antmiu2 said:
thanks does this mean its not compatible or i cant go higher or what?
Click to expand...
Click to collapse
Many phones just can't handle that much of an OC. Read the Faux or Clemsyn kernel threads and you will see this. Very few people have been able to run the higher OC kernels because like a PC, all hardware is not the same. If you experience boot loops, freezes, etc., you need to flash a lower clocked kernel.
And yes, make sure you flash one which is compatible.
Related
I rooted my TB via the one click method offered by Captiankrtek and flashed Das Bamf 1.3.1. Then downloaded setcpu, autodetected speeds, tried disabling perflock (which it says was not needed) and then tried overclocking past 1024MHz, but alas, that is my highest setting. So I though maybe I need to flash the kernel. Went to Rom Manager and have tried every kernel under Mr. Bobrowitz's section. In the software information it clearly states the custom kernels but setCPU is still sticking to 1024. I tried uninstalling setCPU and reinstalling but nothing is working. Any thoughts? Thanks in advance.
Unless you have a overclock kernal you won't be able to overclock. Sounds to me you have a stock kernal.
Sent from my Samsung Vibrant
Blkegk said:
Unless you have a overclock kernal you won't be able to overclock. Sounds to me you have a stock kernal.
Sent from my Samsung Vibrant
Click to expand...
Click to collapse
I am running the kernel that is included in the Das BAMF rom. setCPU shows the smartass setting and everything, but 1024 is as high as I can go
You do not have an overclocking kernel. You cannot overclock in this one. That is the problem. Look in development for an OC kernel.
Sent from my ADR6400L using XDA Premium App
Blkegk said:
Unless you have a overclock kernal you won't be able to overclock. Sounds to me you have a stock kernal.
Sent from my Samsung Vibrant
Click to expand...
Click to collapse
ProTekk said:
You do not have an overclocking kernel. You cannot overclock in this one. That is the problem. Look in development for an OC kernel.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
I am a borderline retard I guess. I thought it came with his 1.2 kernel. Also, I tried to flash the 1.9 kernel via CWR last night but I see that link is gone today so maybe that was broken when I tried last night. Anywhootles, I just flashed the 1.2 Kernel by Adrynalyne and it works perfectly. Thanks for not bashing me for my stupidity.
the cdogg said:
I am a borderline retard I guess. I thought it came with his 1.2 kernel. Also, I tried to flash the 1.9 kernel via CWR last night but I see that link is gone today so maybe that was broken when I tried last night. Anywhootles, I just flashed the 1.2 Kernel by Adrynalyne and it works perfectly. Thanks for not bashing me for my stupidity.
Click to expand...
Click to collapse
download this...put on your sd.card....and install
http://forum.xda-developers.com/showthread.php?t=1016916
great speeds
Bamf 1.3.1 does include his 1.2ghz oc kernel, "--New kernel: 1.2ghz, smartass (heavily tweaked this time) as default governor, GPU+ patch."
can R800x model be overclock
Erm,not really sure.Do YOU have R00T? you can make it slightly faster using SETCPU/NOfrills
Yes i have root
download SetCPU/NoFrills
it should make it slightly faster
ATM DooMkernel (dont quote me on this,and find out yourself )doesnt work with R8OOx .If it did,it would be REALLY fast
Set cpu and no Frills does not overclock the play.
Sent from my XPlay using XDA App.
Deoxlar said:
Set cpu and no Frills does not overclock the play.
Sent from my XPlay using XDA App.
Click to expand...
Click to collapse
what about wireless tether on R800x model
Deoxlar said:
Set cpu and no Frills does not overclock the play.
Sent from my XPlay using XDA App.
Click to expand...
Click to collapse
what would happen if you set it to the MAXXXXXXXXXX!
plus it is atleast some improvement !
You can get a nice boost if you bump the minimum and change the governor with NoFrills/SetCPU.
Cat_On_Droid said:
download SetCPU/NoFrills
it should make it slightly faster
ATM DooMkernel (dont quote me on this,and find out yourself )doesnt work with R8OOx .If it did,it would be REALLY fast
Click to expand...
Click to collapse
R800X with doomkernel v03 and FTSv05. OC's to 1.5 and undervolted. Kernel allows for up to 1.9 Check out the their threads and see if your system runs it... i have some minor hiccups but overall experience this phone is flying with this set up.
Order of steps:
Get root
Run cwr via freexperia fastboot (see thread)
Clear data and cache (i didn't but can't hurt)
Reboot into fastboot
Flash doomkernel thru fastboot
Flash fts rom thru fastboot
Run cdma patch thru cwr update.zip
Run Facebook patch thru cwr update.zip
Run gapps patch thru cwr update.zip
Download setcpu and incredicontrol from market, overclock, undervolt and enjoy!
Eu
Sent from my R800x using Tapatalk
er?i have R8OOI and am using DooMkernel,i think your reffering to the OP right?
When using stock kernel no Frills only show 1024mgz as max speed
Sent from my XPlay using XDA App.
nick4nick said:
what about wireless tether on R800x model
Click to expand...
Click to collapse
negative sir i have a rooted play and installed a few tethering programs and everytime u boot it up the stock hotspot crap pops up
you can connect to a device and itll say internet access but you fire up a browser and dont have a hotspot package itll say please upgrade to a hotspot plan blah blah
unless anyone knows what to remove from a stock rom to get rid of the built in hotspot software
Deoxlar said:
When using stock kernel no Frills only show 1024mgz as max speed
Sent from my XPlay using XDA App.
Click to expand...
Click to collapse
Stock kernel maxes at 1024... You need a custom kernel to overclock... You can still use setcpu to underclock the stock kernel if you're rooted.
Sent from my R800x using Tapatalk
edokassiah said:
negative sir i have a rooted play and installed a few tethering programs and everytime u boot it up the stock hotspot crap pops up
you can connect to a device and itll say internet access but you fire up a browser and dont have a hotspot package itll say please upgrade to a hotspot plan blah blah
unless anyone knows what to remove from a stock rom to get rid of the built in hotspot software
Click to expand...
Click to collapse
I saw someone post you could get tethering to work if you fooled it to think you had a different model phone. Nexus perhaps. Probably something to do with editing the info in the build.prop file but i haven't looked into it. Check out the other threads here to see if you can find a description...
Sent from my R800x using Tapatalk
There is no custom kernel for just the stock r800x that will allow overclocking with out incurring numerous bugs. The only way you can overclock without multiple issues is to flash a custom kernel and one of the custom roms. Nofrills or a similar app will allow you to increase the cpu minimum speed with the stock kernel so that it will respond faster from an idle state, but no actual overclocking will occur.
Also this should be posted in the general section as it is a question.
rmreagle said:
R800X with doomkernel v03 and FTSv05. OC's to 1.5 and undervolted. Kernel allows for up to 1.9 Check out the their threads and see if your system runs it... i have some minor hiccups but overall experience this phone is flying with this set up.
Order of steps:
Get root
Run cwr via freexperia fastboot (see thread)
Clear data and cache (i didn't but can't hurt)
Reboot into fastboot
Flash doomkernel thru fastboot
Flash fts rom thru fastboot
Run cdma patch thru cwr update.zip
Run Facebook patch thru cwr update.zip
Run gapps patch thru cwr update.zip
Download setcpu and incredicontrol from market, overclock, undervolt and enjoy!
Eu
Sent from my R800x using Tapatalk
Click to expand...
Click to collapse
Did this last night and it worked great. You should really create a write up because there are no simple instructions to follow in any
other thread.
Sent from my R800x using xda premium
can u post the things i need to get started or the files i need
rmreagle said:
R800X with doomkernel v03 and FTSv05. OC's to 1.5 and undervolted. Kernel allows for up to 1.9 Check out the their threads and see if your system runs it... i have some minor hiccups but overall experience this phone is flying with this set up.
Order of steps:
Get root
Run cwr via freexperia fastboot (see thread)
Clear data and cache (i didn't but can't hurt)
Reboot into fastboot
Flash doomkernel thru fastboot
Flash fts rom thru fastboot
Run cdma patch thru cwr update.zip
Run Facebook patch thru cwr update.zip
Run gapps patch thru cwr update.zip
Download setcpu and incredicontrol from market, overclock, undervolt and enjoy!
Eu
Sent from my R800x using Tapatalk
Click to expand...
Click to collapse
dude I've been trying this for the past 45 minutes to no avail...I can't get it started...which doom kernel do we download? I'm 3.0.1.E.O.88
also which freexperia threat: which fastboot?
the rest of the files?
Dyelon said:
dude I've been trying this for the past 45 minutes to no avail...I can't get it started...which doom kernel do we download? I'm 3.0.1.E.O.88
also which freexperia threat: which fastboot?
the rest of the files?
Click to expand...
Click to collapse
You should find everything you need here :
http://forum.xda-developers.com/showthread.php?t=1140540
just wanting to know whats the best way to install superclean 3. currently on a debloated rom ed01.
Droidstyles guide in general section
Sent from my SCH-I500 using XDA App
sweet thanks, that guide gives me everything i need. appreciate leading me to it
im looking for the atlas file in this gude:
[GUIDE] Installing a Rom/CWM recovery/Root or going back to Stock
but its no longer avialable... any other way to get it??
alope441 said:
im looking for the atlas file in this gude:
[GUIDE] Installing a Rom/CWM recovery/Root or going back to Stock
but its no longer avialable... any other way to get it??
Click to expand...
Click to collapse
??? every link in the guide works when I click on them...
thanks, i forgot to edit my post, i had to use the other links to get the download since some didnt work... would u be able to answer this for me.... i going to download KGB kernels and flash thru cwm but do I'm new to using custom kernals and I'm wondering if i actually have to change the settings or does it have a default setting?
alope441 said:
thanks, i forgot to edit my post, i had to use the other links to get the download since some didnt work... would u be able to answer this for me.... i going to download KGB kernels and flash thru cwm but do I'm new to using custom kernals and I'm wondering if i actually have to change the settings or does it have a default setting?
Click to expand...
Click to collapse
Change what setting? The kernal will come with its default settings when you flash it
ok, i just was confused, since i have seen alot of comments about changing their voltage setting to over clock and under clock. i wasnt sure if they had a default automatically. kernels are the one thing that confuses me.
Kernels will have default voltage settings and (usually) are not over, or under-clocked by default. If you want to change those values you'll need an app like voltage control.
thanks i'll look into it. would it be best to read through the posts under the SC3 Rom to see what would be a good voltage setting to run with?
alope441 said:
thanks, i forgot to edit my post, i had to use the other links to get the download since some didnt work... would u be able to answer this for me.... i going to download KGB kernels and flash thru cwm but do I'm new to using custom kernals and I'm wondering if i actually have to change the settings or does it have a default setting?
Click to expand...
Click to collapse
I have been running SC3 milestone2 (AWESOME btw) for a while as my daily until the bugs get worked out on ICS. I use Leankernel however because my phone had display (color and lines) with KGB. LK comes overclocked at 1.2ghz. It is fixed, whereas KGB can be overclocked more (up to 1.7 but you most likely wont get past 1.3 or 1.4 and be stable).
If you want to flash kernels an wasy way to do it is with SGS Kernel Flasher (free in the market). It will back up you current kernel so it makes trying different kernels easy.
awedel said:
I have been running SC3 milestone2 (AWESOME btw) for a while as my daily until the bugs get worked out on ICS. I use Leankernel however because my phone had display (color and lines) with KGB. LK comes overclocked at 1.2ghz. It is fixed, whereas KGB can be overclocked more (up to 1.7 but you most likely wont get past 1.3 or 1.4 and be stable).
If you want to flash kernels an wasy way to do it is with SGS Kernel Flasher (free in the market). It will back up you current kernel so it makes trying different kernels easy.
Click to expand...
Click to collapse
what bugs are you experiencing on ics keeping you from using it as a daily? im running ths 6.1 with no major issues at all. only mi.or thing i notice is the browser will hang up on a white screen sometimes but a refresh fixes it.
awedel said:
I have been running SC3 milestone2 (AWESOME btw) for a while as my daily until the bugs get worked out on ICS. I use Leankernel however because my phone had display (color and lines) with KGB. LK comes overclocked at 1.2ghz. It is fixed, whereas KGB can be overclocked more (up to 1.7 but you most likely wont get past 1.3 or 1.4 and be stable).
If you want to flash kernels an wasy way to do it is with SGS Kernel Flasher (free in the market). It will back up you current kernel so it makes trying different kernels easy.
Click to expand...
Click to collapse
thanks i will look into that app and the kernel u mentioned. i have been meaning to look into overclocking but still new at it and want to be careful.
So Im trying to OC my Evo to play n64oid(yessss)
and Im flashing the Silverneedle kernel using Kernel Manager Lite and it hangs on the Flashing Kernel screen.The wheel just keeps turning,am I doing something wrong?I've waited over 5 minutes and it still hasn't completed,am I just impatient or what?lolI've backed up the stock ROM,do I need to change my ROM?
Please help I really need to get N64oid working as thats one of the bigger reasons why Im keeping this phone,the 1.2ghz CPU is just too tempting to not OC and N64oid lags currently,but some people have it playing perfectly on there Evo3d's?I did a kill on all unnecessary apps and it still lags,idk but I need my n64 games
I don't think that kernel plays well on the latest 2.17 build.
Sent from my PG86100 using xda premium
Ah which one would you suggest then?
Keep in mind I must be able to OC
OK good news:I sucessfully flashed a Antrhrax Kernel
Bad news:Wont let me OC or install another one.
Kernel manager just keeps going back to the list of roms after I attempt it,what gives?
matt_irepair said:
OK good news:I sucessfully flashed a Antrhrax Kernel
Bad news:Wont let me OC or install another one.
Kernel manager just keeps going back to the list of roms after I attempt it,what gives?
Click to expand...
Click to collapse
If you are wanting to run oc you will need to find a kernel that is built to run on the current software your phone is on.. Such are you 2.17 or 2.08? Are you rooted running a stock rom ?
What does it take to overclock the normal cm7 kernel? The newest nightly kernel is by far the best kernel i have used and it overclocked would make it perfect. Any help is appreciated.
You can't overclock those kernels. Only goes up to 1 ghz. You need fauxs kernels to overclock past 1 ghz.
Sent from my MB860 using XDA
andrew.cambridge said:
You can't overclock those kernels. Only goes up to 1 ghz. You need fauxs kernels to overclock past 1 ghz.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
they were asking how to overclock... an answer saying 'you can't overclock' and then telling them how to overclock might be a little confusing.
@pfoxdizzle download the 1.3 kernel and place it in your internal as you did for CM7 and then install zip and reboot. You should then be overclocked. I have looked around and this is the only link I can find for you
http://forum.xda-developers.com/showthread.php?t=1156040
You might also find it helpful to install a CPU app (free) so you can adjust overclock. Hope this helps.
barry_ said:
they were asking how to overclock... an answer saying 'you can't overclock' and then telling them how to overclock might be a little confusing.
@pfoxdizzle download the 1.3 kernel and place it in your internal as you did for CM7 and then install zip and reboot. You should then be overclocked. I have looked around and this is the only link I can find for you
http://forum.xda-developers.com/showthread.php?t=1156040
You might also find it helpful to install a CPU app (free) so you can adjust overclock. Hope this helps.
Click to expand...
Click to collapse
I believe I said you can't overclock those kernels (stock kernel because that's what he wanted to OC) And then told him to use fauxs kernel. You just repeated what I said, but if it makes you sleep at night, fine.
Sent from my MB860 using XDA