Hey!
Sorry for creating a new post, but im geting lost...im not a p500 user, just helping my friend to unbrick his p500.
I tried anything kdz method with KDZ_FW_UPD also tried LGMDP, still the only thing we can do is access to emergency mode.
KDZ_FW_UPD shows error, i tried anything possible (ofc installed drivers, disabled lg modem etc...I ALSO TRIED THE SHAKE METHOD )
LGMDP (after extracting, encryptng offical kdz) simply stucks...
any idea?
voga06 said:
Hey!
Sorry for creating a new post, but im geting lost...im not a p500 user, just helping my friend to unbrick his p500.
I tried anything kdz method with KDZ_FW_UPD also tried LGMDP, still the only thing we can do is access to emergency mode.
KDZ_FW_UPD shows error, i tried anything possible (ofc installed drivers, disabled lg modem etc...I ALSO TRIED THE SHAKE METHOD )
LGMDP (after extracting, encryptng offical kdz) simply stucks...
any idea?
Click to expand...
Click to collapse
When lgmdp stucks.u can try again by closing and restarting lgmdp.than it will start from where it stuck.this might help.try out
cure25 said:
When lgmdp stucks.u can try again by closing and restarting lgmdp.than it will start from where it stuck.this might help.try out
Click to expand...
Click to collapse
I tried it many times, but it always started from the beginning. Am I doing something wrong? (it can only be closed from task manager)
is it possible to get a backed up nv and a working dz file?
Lgmdp rocks, if you can access emergency mode then use lgmdp just to flash a custom recovery, then boot to recovery with combo buttons and flash a ROM
Roqu3 said:
Lgmdp rocks, if you can access emergency mode then use lgmdp just to flash a custom recovery, then boot to recovery with combo buttons and flash a ROM
Click to expand...
Click to collapse
I have found a flash image (http://androidforums.com/getitnowmarketing/221388-custom-recovery-optimus-one-p500-thunderg.html) how should i flash it with cmdp? if i try select image, i just get a ton of errors, and the image becomes completely unusable
i cant reach it with adb
Make sure the image is in a extracted folder (not in zip form)..I always get 4 or 5 errors just close each box and then push downolad or start.The top line will stay.Run it anyway if you browsed to the right folder it will flash..wait for DOWNLOAD COMPLETE message DO NOT ABORT at any time before that (up to 10 mins max).usually less.
i miss partition table wich is needed for all other settings, so i get about 10 errors and nothing remains selected
i have a flash_image (without extension)
tried recovery-RA-GNM-thunderg-1.1.0 and AmonRa_3.06_Recovery_ThunderG
still dont know what im missing, any idea?
If u r able to access emergency mode then use kdz updater n flash using android 2.2.2 v20e .just google lg p500 rom link. The only thing u have to do is to select EMERGENCY instead of DIAG.. n do a factory reset after flash..
Press THANKS if i help u..
Sent from my LG-P500 using XDA App
Dont flash a recovery image YET.Flash a p-500 rom first to restore phone. then flash a recovery after.
Bhawan said:
If u r able to access emergency mode then use kdz updater n flash using android 2.2.2 v20e .just google lg india p500 rom link. The only thing u have to do is to select EMERGENCY instead of DIAG.. n do a factory reset after flash..
Press THANKS if i help u..
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
lg download links are unavailable, their site is completely unusable...
i tried to flash v10e with kdz updater, but no matter what i tried, i got an error
(i could easily do it with my p970)
ur6beersaway said:
Dont flash a recovery image YET.Flash a p-500 rom first to restore phone. then flash a recovery after.
Click to expand...
Click to collapse
tried to flash v10e with lgmdp, but it stucked, got error with kdz update
voga06 said:
i miss partition table wich is needed for all other settings, so i get about 10 errors and nothing remains selected
i have a flash_image (without extension)
tried recovery-RA-GNM-thunderg-1.1.0 and AmonRa_3.06_Recovery_ThunderG
still dont know what im missing, any idea?
Click to expand...
Click to collapse
Try TWRP 1.1.1.1XL ? with LGDMP
---------- Post added at 03:31 PM ---------- Previous post was at 03:24 PM ----------
voga06 said:
i miss partition table wich is needed for all other settings, so i get about 10 errors and nothing remains selected
i have a flash_image (without extension)
tried recovery-RA-GNM-thunderg-1.1.0 and AmonRa_3.06_Recovery_ThunderG
still dont know what im missing, any idea?
Click to expand...
Click to collapse
Try TWRP 1.1.1.1 xl with LGDMP. http://lg-p500.zrusit.eu/forum/downloads.php?view=detail&df_id=135
ur6beersaway said:
Try TWRP 1.1.1.1 xl with LGDMP. http://lg-p500.zrusit.eu/forum/downloads.php?view=detail&df_id=135
Click to expand...
Click to collapse
same as before, lots of errors, no partition table
you suggested to flash a rom first, but what if it stucks burning amss?
try to connect the phone at lgmp without battery in emerceny mode.
NEXTevolution said:
try to connect the phone at lgmp without battery in emerceny mode.
Click to expand...
Click to collapse
That is how i was doing it (with battery its bootlooping and i cant connect)
Have u select emergency mode while flashing. If nothing works then remove battery ,sim n sd card wait for some time( 5-10 min). ( install msxml.msi package from the kdz updater zip archive n restart ur pc) after that open kdz updater n then press n hold home+volume down+power after connecting to usb. This will let u enter in emergency mode. Press n hold back key n volume down key for forcefully detect the phone. Be sure that u have kdz updater already opened. Selest 3GQCT in type and EMERGENCY in mode tab. Select ur .kdz official rom n then flash...
Press THANKS if I help you...
Sent from my [email protected] OpTiMu$ On€ [email protected]
BTW phone goes to emergency mode even with battery on and nothing pressed but power button
Bhawan said:
Have u select emergency mode while flashing. If nothing works then remove battery ,sim n sd card wait for some time( 5-10 min). ( install msxml.msi package from the kdz updater zip archive n restart ur pc) after that open kdz updater n then press n hold home+volume down+power after connecting to usb. This will let u enter in emergency mode. Press n hold back key n volume down key for forcefully detect the phone. Be sure that u have kdz updater already opened. Selest 3GQCT in type and EMERGENCY in mode tab. Select ur .kdz official rom n then flash...
Press THANKS if I help you...
Sent from my [email protected] OpTiMu$ On€ [email protected]
Click to expand...
Click to collapse
you didnt mention disabling lg modem, but its needed, isnt it?
Related
Sorry if a topic in the wrong section ...
The problem is this: After a failed firmware phone, my phone will not run at all, tried to include a variety of ways, there is no reaction at all, black screen does not work ... do not turn on ..
Is there a solution how to cure a dead mode?
thats pretty vague. looks like you have a bricked phone but describe what you did
update the phone via KDZ. KDZ has written a mistake, still gleaming yellow screen, turned off the phone and all ... more it is not included ... help ....
http://forum.xda-developers.com/showthread.php?t=1183579
emergency mode not included....
Manitikyl said:
emergency mode not included....
Click to expand...
Click to collapse
what do you mean not included !?
read this >>
http://forum.xda-developers.com/showthread.php?t=1197111
Manitikyl said:
emergency mode not included....
Click to expand...
Click to collapse
i believe emergency mode is back+volume up+power
telephone does not ring at all the reactions ...
Please don't use google translate! It sucks!
sweetnsour said:
i believe emergency mode is back+volume up+power
Click to expand...
Click to collapse
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
InfiniteRisen said:
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
Be careful, one of those key combination will reset the phone to factory defaults.
And it doesn't ask for permission when it does...
InfiniteRisen said:
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
this is to boot into recovery. im talking about emergency mode
Da_Android said:
Be careful, one of those key combination will reset the phone to factory defaults.
And it doesn't ask for permission when it does...
Click to expand...
Click to collapse
a factory reset will be performed if you dont have a custom recovery. if you do have one, this is the combo to boot into it
from my thread >>>
Hello,
- i'm the proud owner of an LG P500, i mannaged to "kill" it alot of times, one time i bricked it so bad the power button was useless. I'm going to tell you how i always manneged to fix it.
1. - install the USB DRIVERS for LG P500 Download LINK
2. - extract the KDZ archive , install msxml.msi, Download LINK, Download Froyo 2.2.2. v10E.kdz after that open >> KDZ_FW_UPD.exe, select type 3GQCT and mode DIAG (select this only if your phone starts when you connect the USB and the battery charging logo apears) if the phone starts in Emergency Mode or dosen't start at all >> remove battery and while holding the BACK and volume UP buttons connect the USB, the phone should start in Emergency Mode, after that select in KDZ, MODE > EMERGENCY, select file > V10E_00.kdz and press the "Launch software update" .
- wait for KDZ to do it's job ( until it says FINISHED) after it is finished it will reset the phone (alot of times the phone wolden't start after reset and i had to start it manualy @power button) an LG logo should apear , then an Android logo, wait about 5 - 10 min (the phone should start and you will have froyo 2.2.2. working), but if the Android LOGO stops or lags for 2,3 seconds then you must remove battery , put it back , and power on the phone. if it dose the same thing , then you must reflash your phone. Usualy it works with the battery on and simply flashing under DIAG mode.
- after reflashing if you have the same problem , you must remove battery and try installing it DIAG mode. if it still dosen't work enter emergency mode ( UP + BACK + connect USB (or press the power button)) and reflash using KDZ , MODE >>> EMERGENCY.
- when phone is connected go to COMPUTER > PROPERTIES > DEVICE MANAGER > MODEMS > and disable LGE Modem.. (some say it helps i diden't saw any difference.)
- as i was saying i killed my phone alot of times, KDZ always helped me bring it back to life , be patient.. and if you get alot of errors and flash meny times the phone gets hot , leave it to cool for a while and then try again.
be patient !! hope this will help you ..
sorry for my bad english !!
you really need to stop posting that without giving proper credits
these links cover exactly what youve said
http://forum.xda-developers.com/showthread.php?t=1060121
http://forum.xda-developers.com/showthread.php?t=875881
Sent from my LG-P500 using XDA Premium App
Hey guys plz help me fast i was using mik's cm7 6.5.8 yesterday at night i switched off my phone now today at the morning when i tried to switch it on it showed 0% charge then shut down now when i try to charge it its stuck on the grey lg logo after leaving it for an hour also it is not working even after tryting to reboot its happening.when i booted it into emergency mode it was booting but my phone cannot b detected by my pc to use kdz plz guys help.....
after u plug the charger, switch on and go to custom recovery, leave it for half hour and then reboot
you didn't understood when i plug the charger it turns itself on rather than charging and i can't boot into recovery either only emergency mode can be done
Devil_Dude said:
you didn't understood when i plug the charger it turns itself on rather than charging and i can't boot into recovery either only emergency mode can be done
Click to expand...
Click to collapse
I understood your problem, the fastest way is using LGMDP ( the Russian's LG P500 tool help us to flash baseband ) flash the baseband that your phone is having. EX:
Now your phone have the old baseband , so you just go to LGMDP , choose your phone , and then flash the old baseband .... It should be get out of emergency mode. If the LGMDP Freeze when it's flashing the baseband , you have to use the Task Manager on Windows ( Ctrl + Alt + Delete ) , it should show up the task manager or a board that have the "start task manager" line and you have to click that line. After open the task manager on windows, see on the top, click on the "Processes" Tab , and then find the "LGMDP.exe" and then click on "End Process" . And start LGMDP again
Maybe you should return to the default 2.3.3 and stop using experimental os-es!
@thachtunganh my phone is not detected by pc even after i flashed cm7(this is bull$#!T)
@s0v3r3ign69 i am never gonna do dat...
Hope this might work for u:
1.plug in charger to ur phone without switching plug on.
2.keep vol down and home butoon pressed and then turn on charger(with buttons pressed).
3.Then u should enter into recovery mode.
4.then do fresh install of this rom.
ashishv said:
Hope this might work for u:
1.plug in charger to ur phone without switching plug on.
2.keep vol down and home butoon pressed and then turn on charger(with buttons pressed).
3.Then u should enter into recovery mode.
4.then do fresh install of this rom.
Click to expand...
Click to collapse
nope its not working yet...
but now i can say i have charged the battery by some exteranal source now the problem is that my phone is still not booting up(Its stays on the first Grey LG Logo) neither its detected by my pc in emergency mode....
Devil_Dude said:
nope its not working yet...
but now i can say i have charged the battery by some exteranal source now the problem is that my phone is still not booting up(Its stays on the first Grey LG Logo) neither its detected by my pc in emergency mode....
Click to expand...
Click to collapse
cant u enter recovery mode???
i can but my phone is not detected by my pc...
In recovery,enter mass storage mode and ur phone will be detected.Then copy zip file of rom and flash it.
I dun know if this helps i had mine stuck in emergency mode no matter what i did when i power up after the lg logo it goes into emergency mode n also not recognise by pc so i use the kdz updater and instead of DIAG i set it in emergency and i updated stock rom and it works of course i rooted it straight away ...hope u had yr problem solved by the time u read this cheers
Sent from my LG-P500 using xda premium
Sorry i forgpt remove yr battery when u connect to pc and just before the kdz finishes insert yr battery done
Sent from my LG-P500 using xda premium
Devil_Dude said:
i can but my phone is not detected by my pc...
Click to expand...
Click to collapse
If you can boot into custom recovery then y dont you flash mik's rom 6.5.8 again over the present one without erasing anything, try it your problem might be solved
i can boot into only emergency and there is some problem with my phone's usb port whenever i flash any unofficial rom its not detected by my pc anymore....
and guys if my phone was ever detected by my pc i could have used kdz by now cause i have flashed more than 30 times using that and 4 times to unbrick my phone yet....
ashishv said:
In recovery,enter mass storage mode and ur phone will be detected.Then copy zip file of rom and flash it.
Click to expand...
Click to collapse
In recovery go to mounts and storage and in the select mount USB and boom ur phone will be detected in PC now u can reflash the rom after copying the file to sd..remove to wipe everything befpre u do that !!enjoy! N press thanks..
Sent from my LG-P500 using xda premium
Devil_Dude said:
@thachtunganh my phone is not detected by pc even after i flashed cm7(this is bull$#!T)
@s0v3r3ign69 i am never gonna do dat...
Click to expand...
Click to collapse
WTF? ..... i think your PC have the problems.... check the driver in device manager....
---------- Post added at 02:56 PM ---------- Previous post was at 02:44 PM ----------
androidusero1p500 said:
In recovery go to mounts and storage and in the select mount USB and boom ur phone will be detected in PC now u can reflash the rom after copying the file to sd..remove to wipe everything befpre u do that !!enjoy! N press thanks..
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
What are you talkinh about? the PC can not detected his phone , it mean this problem is causing by the driver on PC or his phone... and what can mount usb can do, the option mounts usb mass storage doesn't help anything , it just can like mount usb mass storage when your phone is on....
i have reisntalled all the driver again but its not wokring yet buti think its time to goto the F**king service center **** this i cannot even flash a official rom
dude
you can enter into emergency mode right??
so restart your phone(press power button+volume up+back button and enter into emergency mode)
then in kdz instead of DIAG select Emergency/CS_Emergency
and try
it should work!!
EDIT:going through the above posts looks like your phone's USB port isnt working
maybe its better you give the phone to LG for repair :/
thachtunganh said:
and what can mount usb can do, the option mounts usb mass storage doesn't help anything , it just can like mount usb mass storage when your phone is on....
Click to expand...
Click to collapse
What do u mean,his battery is charged man.
Afternoon guys, so today, I finally found my phone. I moved out this previous weekend and I left it at my old place, my friends figured it'd be hilarious to post something on Facebook or send people texts from my phone, but locked themselves out, and then apparently attempted to restart in recovery mode. Now it's stuck on the LG logo, it's not seen by my computer by LG's software, or KDZ, and I don't want to take it back to the shop and get it replaced because it has all of my stuff on it (And it was rooted with Cyanogenmod installed) Anyone have any other suggestions? Do you think the store will find out or even care if I had Cyanogen installed?
Cheers, Chris.
Also, I apologize in advance if this thread is in the wrong place.
1.does it boot in recovery or not. If it does there is no problem
2.Have you tried wiping dalvik cache and data.
3.you can flash another rom it boots in recovery
Attempt Further
Try all SWISS ARMY methods ;-)
Can you get into RECOVERY???
If so try wiping CACHE,DALVIK,BAT STATS then reboot..else
You can use option MOUNT USB STORAGE(when connected to pc)
and COPY files from sd to pc.
After that Flash a new ROM after a HARD RESET
rishabho1 said:
1.does it boot in recovery or not. If it does there is no problem
2.Have you tried wiping dalvik cache and data.
3.you can flash another rom it boots in recovery
Click to expand...
Click to collapse
No, doesn't boot at all, stuck on the LG logo.
I haven't wiped any caches, I don't have a clue how.
I can get it into Emergency Mode, but KDZ isn't finding the phone, with the modem disabled. The LG software wont update, says there's a problem with the connection between the phone and the computer (My guess would be that it doesn't like Emergency Mode). Does it want a recovery image to be on the SD card?It'd be my first point of call, but I don't have an SD card reader on hand, but if that's all it wants, I could probably find one around.
I usually work with computers, not phones, and to my understanding, this could all be resolved by resetting the bios/removing the CMOS battery for 5 minutes, is there a way to do this on my phone?
do you have lg united drivers because kdz updater picks up the phone even while booting and also if phone is off .
dont use the computer scienve in phones..
what mode are u using in kdz updater
thank me please....
chart75 said:
No, doesn't boot at all, stuck on the LG logo.
I haven't wiped any caches, I don't have a clue how.
I can get it into Emergency Mode, but KDZ isn't finding the phone, with the modem disabled. The LG software wont update, says there's a problem with the connection between the phone and the computer (My guess would be that it doesn't like Emergency Mode). Does it want a recovery image to be on the SD card?It'd be my first point of call, but I don't have an SD card reader on hand, but if that's all it wants, I could probably find one around.
I usually work with computers, not phones, and to my understanding, this could all be resolved by resetting the bios/removing the CMOS battery for 5 minutes, is there a way to do this on my phone?
Click to expand...
Click to collapse
HARD RESET is like removing CMOS battery... but it reverts phone back to ORIGINAL STATE n you will lose all your data and apps..
So Backup all data in SD then PERFORM Hard Reset by:
Pressing Home+Vol.Down+Power
(CAUTION:HARD RESET DELETE ALL USER DATA
rishabho1 said:
do you have lg united drivers because kdz updater picks up the phone even while booting and also if phone is off .
dont use the computer scienve in phones..
what mode are u using in kdz updater
Click to expand...
Click to collapse
Yep, LG United Drivers.
I'm using;
Type: 3GQCT
And Phonetype: Emergency
I still get;
17:29:03 : Launching SW update
17:29:03 : Unpacking KDZ
17:29:06 : KDZ file extraced
17:29:08 : Files were extracted.
17:29:08 : LGMobileDL Load.
17:29:08 : Port = -1
17:29:08 : Connecting to phone
17:29:13 : PHONE WAS NOT FOUND!
17:29:15 : ===FINISHED===
I've read the other threads, and they all say that it's usually the Modem driver, but I've made sure that it's disabled, and the battery's out, so it's getting power from the USB, so I don't think it can be the cable.
u didnt explain what is happening
1when you press power button it gets stuck on lg or what
2 when you press vol up + home + power what happens
you didnt tell correctly
rishabho1 said:
u didnt explain what is happening
1when you press power button it gets stuck on lg or what
2 when you press vol up + home + power what happens
you didnt tell correctly
Click to expand...
Click to collapse
Its like removing CMOS battery of your pc.
But in PC, BIOS Settings are reverted to DEFAULT and OS is not harmed.
Here, Your phone will appear as if you just powered it up after FLASHING CM7
CHECK OUT HERE:
http://forum.xda-developers.com/showthread.php?t=1257134
Press Thanks If I Helped You! ;-)
rishabho1 said:
u didnt explain what is happening
1when you press power button it gets stuck on lg or what
2 when you press vol up + home + power what happens
you didnt tell correctly
Click to expand...
Click to collapse
Sorry I was vague, it gets stuck on the LG symbol. With Vol up , home and power it sits on the LG screen as well.
chart75 said:
Sorry I was vague, it gets stuck on the LG symbol. With Vol up , home and power it sits on the LG screen as well.
Click to expand...
Click to collapse
My mistake it was Vol.down..
thank you. i will try it later
chart75 said:
Yep, LG United Drivers.
I'm using;
Type: 3GQCT
And Phonetype: Emergency
I still get;
17:29:03 : Launching SW update
17:29:03 : Unpacking KDZ
17:29:06 : KDZ file extraced
17:29:08 : Files were extracted.
17:29:08 : LGMobileDL Load.
17:29:08 : Port = -1
17:29:08 : Connecting to phone
17:29:13 : PHONE WAS NOT FOUND!
17:29:15 : ===FINISHED===
I've read the other threads, and they all say that it's usually the Modem driver, but I've made sure that it's disabled, and the battery's out, so it's getting power from the USB, so I don't think it can be the cable.
Click to expand...
Click to collapse
dont take out the battery and use rear usb port and shake ur phone hard to make it detect usually shaking helps
Have you tried shaking the phone?:
http://forum.xda-developers.com/showthread.php?t=883314
laz3r69 said:
My mistake it was Vol.down..
Click to expand...
Click to collapse
Still just that damn LG symbol.
Try These:
http://forum.xda-developers.com/showthread.php?t=1257134
http://forum.xda-developers.com/showthread.php?t=883314
One thing you can always do is brick your phone and take it to lg ppl and say i was playing a game suddenly my phone switched off do this only if in warranty!
or
DO NOT PLUG IN YOUR PHONE UNTIL STEP 3!
1. Went to system restore in windows(you'll find it under Backup and Restore in the Control Panel) and restore your computer to a state before installing any drivers for your phone.
2. After everything had completed, installed LG Mobile update. There is an option to install general USB drivers for your phone, DO NOT do it! Go to Customer Support > Application, Manual & USB driver download. Input your IMEI number from behind the battery in the back of your phone(or just select the "Read your phone" option if you can get it to read your phone). It will search and return the correct drivers for your exact phone. Download and install your USB drivers.
3. Keep your phone disconnected from your PC, and start up LG mobile update again. Connect your phone, LG mobile update should verify the connection by trying to connect to your phone, checking software versions, etc. It will connect even if you are stuck at the LG screen.
4. If everything checks out run KDZ updater and flash your phone back to original specs.
try this this uses lg updater instead of kdz updater
have you flashed a .32 kernel on .35 rom or vice versa?
Press thanx if i helped you..
Sent from LG-P500 using xda premium
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
not screwed
promoking said:
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
Click to expand...
Click to collapse
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
hope he follows up with a thank you.
milindchitale said:
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
Click to expand...
Click to collapse
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hii,
Finally I reached on TWRP. Can I copy the Stock ROM Zip file in Memory Card and then install memory card on phone. And from Install in TWRP I can go the SD Card location and install it from there? Possible ?
Actually there was no battery on phone that is why the phone was not booting up to TWRP mode. Now I'm in TWRP and downloading Stock ROM. Hope it get fixed soon.
Many Thanks and Regards
promoking said:
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Click to expand...
Click to collapse
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
adfurgerson said:
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
Click to expand...
Click to collapse
Hi,
Now I'm downloading ...
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
I guess this is original ATT LG E970 Firmware. I will copy it into my external Memory Card and then will insert into phone. After that using TWRP I'll be going to use this Zip file and after that factory reset. Am I correct ? Do I need to follow different steps ?
Let me know. Moreover do I need to unlock Phone again? When I received it was already in Unlocked State. So installing the above link firmware will lock it again? Or should I proceed with the link I posted earlier, I mean this ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
And Rename File to .bin instead of .tot and Make ZIP it again ?
Please let me know.
PS ; I'm still Downloading The firmware from Ist link.
Regards
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hi, I tried these ROMS,
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
and downloaded today ..
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
Both are not working. ON TWRP it is saying ..
MD5 File NOT FOUND
ZIP File Signature VERIFICATION FAILED
Error in Flashing Zip
Please help?
Edit : I also tried Unticking ZIP File Verification. But still it says .. "Error in Flashing Zip"
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
pottyvick said:
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
Click to expand...
Click to collapse
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
promoking said:
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
Click to expand...
Click to collapse
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
pottyvick said:
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
Click to expand...
Click to collapse
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
promoking said:
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
Click to expand...
Click to collapse
in fast boot, what happens when you push the volume down button?
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
promoking said:
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
Click to expand...
Click to collapse
push the volume buttons, it will change the recovery mode to other options... Push the volume buttons on the handset...
pottyvick said:
in fast boot, what happens when you push the volume down button?
Click to expand...
Click to collapse
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
promoking said:
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
Click to expand...
Click to collapse
sorry, you're right... have you tried to manually get into download mode?
Poweroff phone>connect usb cable to phone (not to computer yet)>hold down (both) volume up/volume down>connect usb to computer (while holding down volume buttons)
pottyvick said:
It gives you only those 4 options? there is no other option>?
Click to expand...
Click to collapse
No Sir, I get only these 4 options above that Green Figure.
promoking said:
No Sir, I get only these 4 options above that Green Figure.
Click to expand...
Click to collapse
I edited my comment sorry...
I've just fixed fliped screen bug of this cwm on this phone.
Its not longer get bootlop when battery pull off.
Need superuser permission
Download and upack Archive
Install the program Gscript.apk on your phone
Put file boothack-cwm.sh on /storage/sdcard0/gscript /
Put APPSSBL.bin and recovery.img on the path /storage/external_SD/
Run Gscript
Press softkey menu > Add Script > Load file > boothack-cwm.sh
Click on loaded script boothack-cwm
Done (Yours phone will be restart to recovery mode) :good:
Now you can go to recovery via gscript or press power button + vol down + hot key button(quick memo)
Update 26/07/14
Fixing issue cant mount mass storage,
Update 27/07/14
Fixing issue cant restore on update 26/07/14,
Add ADB support on recovery mode
Update 31/07/14
Update hackbootloader (because i put wrong hackbootloader on update 26/07 and 27/07)
Known issues at the moment:
Screen upside down on AromaFM
Big Thank to [email protected] for fixed bootloader
PS: Sorry for my bad english
Thanks and a question
riskey95 said:
I've just fixed fliped screen bug of this cwm on this phone.
Need superuser permission
Download and upack rchive from attachment
Install the program Gscript.apk on your phone
Put file boothack-cwm.sh on /storage/sdcard0/gscript /
Put APPSSBL.bin and recovery.img on the path /storage/external_SD/
Run Gscript
Press softkey menu > Add Script > Load file > boothack-cwm.sh
Click on loaded script boothack-cwm
Done (Yours phone will be restart to recovery mode) :good:
Known issues at the moment:
nope
PS: Sorry for my bad english
Click to expand...
Click to collapse
Thanks for the update.
3 questions:
1. I guess it should work on all L7 II series, right? I'm asking this as I have the P714 device.
2. Please elaborate on step 6, not sure I understand it.
3. Any risk to brick the phone? If so, what's the way to recover?
Cheers,
D.
Works on my rooted LG P713 L7 II.
Suwun bro.
Digdis said:
Thanks for the update.
3 questions:
1. I guess it should work on all L7 II series, right? I'm asking this as I have the P714 device.
2. Please elaborate on step 6, not sure I understand it.
3. Any risk to brick the phone? If so, what's the way to recover?
Cheers,
D.
Click to expand...
Click to collapse
Never mind my questions, figured everything out. CWM successfully installed on my P714. :good:
Big cheers!
D.
I have a doubt:
you say that the phone will restart on recovery mode ¿ will this happens every time I boot the phone or only through this program?
I'm willing to install it on a p712
nehuy said:
I have a doubt:
you say that the phone will restart on recovery mode ¿ will this happens every time I boot the phone or only through this program?
I'm willing to install it on a p712
Click to expand...
Click to collapse
Only on the steps provided.
Once it's installed, and your on recovery restart it and yours phone will boot normally.
Sent from my LG-p705 using Tapatalk
nehuy said:
I have a doubt:
you say that the phone will restart on recovery mode ¿ will this happens every time I boot the phone or only through this program?
I'm willing to install it on a p712
Click to expand...
Click to collapse
Only once, after applying these steps.
another doubt:
¿is there anything you can flash on the L7 II, or what's the purpose of using cwm at this point?
has anyone tried backup and restore, wiping battery stats? which other features that can be used at this stage are provided? p715/v10i/india/vroot1.7.6
Also works on P710 (L7 2). Didn't run the script pushed APPSSBL.bin and recovery on sd then put them in dev/block/. Works good i can make backup, restore and flash but there is a problem. If i leave the phone off for some hours when i start it it will go into a bootloop. To stop this I need to take battery out and open the phone using external charger.
christi9503 said:
Also works on P710 (L7 2). Didn't run the script pushed APPSSBL.bin and recovery on sd then put them in dev/block/. Works good i can make backup, restore and flash but there is a problem. If i leave the phone off for some hours when i start it it will go into a bootloop. To stop this I need to take battery out and open the phone using external charger.
Click to expand...
Click to collapse
try latest update, i just fixed.
christi9503 said:
Also works on P710 (L7 2). Didn't run the script pushed APPSSBL.bin and recovery on sd then put them in dev/block/. Works good i can make backup, restore and flash but there is a problem. If i leave the phone off for some hours when i start it it will go into a bootloop. To stop this I need to take battery out and open the phone using external charger.
Click to expand...
Click to collapse
To stop this (bootloop) you need to take battery out, and then put battery back, connect external charger, and press power button... Right?
Bootloop Persists
riskey95 said:
try latest update, i just fixed.
Click to expand...
Click to collapse
Hello Riskey,
I flashed your lastest version yesterday.. The bootloop issue still persists! Worst part, I cant come out of it!! from any of the above methods!!
Regards
maxx_hr said:
To stop this (bootloop) you need to take battery out, and then put battery back, connect external charger, and press power button... Right?
Click to expand...
Click to collapse
No to stop the bootloop i do this. Plug out battery for 1 minute. Start the phone with charger only. If it doesn't work wait until a yellow triangle and battery comes then push battery in and open phone. But i flashed the appssbl again using adb from that rar and i didn't get bootloop.
ashhem said:
Hello Riskey,
I flashed your lastest version yesterday.. The bootloop issue still persists! Worst part, I cant come out of it!! from any of the above methods!!
Regards
Click to expand...
Click to collapse
i dont get bug like this
Flashed Stock ROM to recover!
riskey95 said:
i dont get bug like this
Click to expand...
Click to collapse
Hello Riskey,
Unfortunately I did.. And the method mention below by Christi also did NOT work. Whenever I plug the charger to the phone, it shows LG symbol and goes to CWM recovery.. However I flashed stock Rom on my P715 and its fine now. The problem I think qas an update.. The phone took an update from LG which said 1 app to be updated.. And when I restarted the phone this isaue occurred.. Maybe this will help you?!
Regards
christi9503 said:
No to stop the bootloop i do this. Plug out battery for 1 minute. Start the phone with charger only. If it doesn't work wait until a yellow triangle and battery comes then push battery in and open phone. But i flashed the appssbl again using adb from that rar and i didn't get bootloop.
Click to expand...
Click to collapse
Hi Christi,
I tried to do whatever you told but alas nothing worked.. As I said above, it went into a loop after that OTA update.. However thanks for the help :angel:
Regards
ashhem said:
Hello Riskey,
Unfortunately I did.. And the method mention below by Christi also did NOT work. Whenever I plug the charger to the phone, it shows LG symbol and goes to CWM recovery.. However I flashed stock Rom on my P715 and its fine now. The problem I think qas an update.. The phone took an update from LG which said 1 app to be updated.. And when I restarted the phone this isaue occurred.. Maybe this will help you?!
Regards
Hi Christi,
I tried to do whatever you told but alas nothing worked.. As I said above, it went into a loop after that OTA update.. However thanks for the help :angel:
Regards
Click to expand...
Click to collapse
Sorry man maybe it is different problem because I am running it on a p710 with latest firmware the 10j one. Anyway you can always recover bootlop with Kdz flasher. For those that don't know how. Pull battery out. Wait 1 minute or so then press Volume-Down and hold it while you insert your usb. There will be a yellow screen (Emergency Mode). Be sure to have all drivers download the firmware for your phone, run Kdz Flasher Type: 3GQCT - Phone Mode: Emergency and run start. You will recover the bootloops.
OK, so I tried to see if this fixed the bootloop problem (do I have a death wish or what?). With the previous version of CWM, I booted to recovery mode from power down - got the bootloop (recovered with battery out and charger plugged + home).
Now, flashed the new image. Succesfully got to CWM via reset to recovery from power menu. However, when trying to get to CWM via button combination (power, vol up & down, home), I never get to CWM but only to regular boot sequence. Tried maybe ten times, always the same. Anyone can explain?
Sent from my LG-P714 using Tapatalk
Digdis said:
OK, so I tried to see if this fixed the bootloop problem (do I have a death wish or what?). With the previous version of CWM, I booted to recovery mode from power down - got the bootloop (recovered with battery out and charger plugged + home).
Now, flashed the new image. Succesfully got to CWM via reset to recovery from power menu. However, when trying to get to CWM via button combination (power, vol up & down, home), I never get to CWM but only to regular boot sequence. Tried maybe ten times, always the same. Anyone can explain?
Sent from my LG-P714 using Tapatalk
Click to expand...
Click to collapse
Hi ,i have the same model,does this recovery works fine? i mean ,does it have bootloops problems? and to answer your quesrion,try using this combination:
Power button + up volume + button home
after the vivration just release the power button and keep pressing the other 2 until you reach the recovery screen.
Tell me if its works,and also if the recovery is stable for the p714,thanks
kalel29 said:
Hi ,i have the same model,does this recovery works fine? i mean ,does it have bootloops problems? and to answer your quesrion,try using this combination:
Power button + up volume + button home
after the vivration just release the power button and keep pressing the other 2 until you reach the recovery screen.
Tell me if its works,and also if the recovery is stable for the p714,thanks
Click to expand...
Click to collapse
Thanks mate. :good: This combination brought me to the recovery menu. Don't know why I didn't think about it - was the same with the Samsung device I previously had.
And I can confirm that this fixes the bootloop issue. We have CWM for this device.