HELP: Dead phone LG P500 - Optimus One, P500, V General

Sorry if a topic in the wrong section ...
The problem is this: After a failed firmware phone, my phone will not run at all, tried to include a variety of ways, there is no reaction at all, black screen does not work ... do not turn on ..
Is there a solution how to cure a dead mode?

thats pretty vague. looks like you have a bricked phone but describe what you did

update the phone via KDZ. KDZ has written a mistake, still gleaming yellow screen, turned off the phone and all ... more it is not included ... help ....

http://forum.xda-developers.com/showthread.php?t=1183579

emergency mode not included....

Manitikyl said:
emergency mode not included....
Click to expand...
Click to collapse
what do you mean not included !?
read this >>
http://forum.xda-developers.com/showthread.php?t=1197111

Manitikyl said:
emergency mode not included....
Click to expand...
Click to collapse
i believe emergency mode is back+volume up+power

telephone does not ring at all the reactions ...

Please don't use google translate! It sucks!

sweetnsour said:
i believe emergency mode is back+volume up+power
Click to expand...
Click to collapse
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App

InfiniteRisen said:
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
Be careful, one of those key combination will reset the phone to factory defaults.
And it doesn't ask for permission when it does...

InfiniteRisen said:
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
this is to boot into recovery. im talking about emergency mode

Da_Android said:
Be careful, one of those key combination will reset the phone to factory defaults.
And it doesn't ask for permission when it does...
Click to expand...
Click to collapse
a factory reset will be performed if you dont have a custom recovery. if you do have one, this is the combo to boot into it

from my thread >>>
Hello,
- i'm the proud owner of an LG P500, i mannaged to "kill" it alot of times, one time i bricked it so bad the power button was useless. I'm going to tell you how i always manneged to fix it.
1. - install the USB DRIVERS for LG P500 Download LINK
2. - extract the KDZ archive , install msxml.msi, Download LINK, Download Froyo 2.2.2. v10E.kdz after that open >> KDZ_FW_UPD.exe, select type 3GQCT and mode DIAG (select this only if your phone starts when you connect the USB and the battery charging logo apears) if the phone starts in Emergency Mode or dosen't start at all >> remove battery and while holding the BACK and volume UP buttons connect the USB, the phone should start in Emergency Mode, after that select in KDZ, MODE > EMERGENCY, select file > V10E_00.kdz and press the "Launch software update" .
- wait for KDZ to do it's job ( until it says FINISHED) after it is finished it will reset the phone (alot of times the phone wolden't start after reset and i had to start it manualy @power button) an LG logo should apear , then an Android logo, wait about 5 - 10 min (the phone should start and you will have froyo 2.2.2. working), but if the Android LOGO stops or lags for 2,3 seconds then you must remove battery , put it back , and power on the phone. if it dose the same thing , then you must reflash your phone. Usualy it works with the battery on and simply flashing under DIAG mode.
- after reflashing if you have the same problem , you must remove battery and try installing it DIAG mode. if it still dosen't work enter emergency mode ( UP + BACK + connect USB (or press the power button)) and reflash using KDZ , MODE >>> EMERGENCY.
- when phone is connected go to COMPUTER > PROPERTIES > DEVICE MANAGER > MODEMS > and disable LGE Modem.. (some say it helps i diden't saw any difference.)
- as i was saying i killed my phone alot of times, KDZ always helped me bring it back to life , be patient.. and if you get alot of errors and flash meny times the phone gets hot , leave it to cool for a while and then try again.
be patient !! hope this will help you ..
sorry for my bad english !!

you really need to stop posting that without giving proper credits
these links cover exactly what youve said
http://forum.xda-developers.com/showthread.php?t=1060121
http://forum.xda-developers.com/showthread.php?t=875881
Sent from my LG-P500 using XDA Premium App

Related

got stuck on android screen after update,plz help

help me plz,,,,,
i updated my phone to v20c and restarted but it got stuck on android screen (android animation working) almost 20mins are up but nothing proceeds further.plz help me urgent
Do a factory reset.
Turn phone off, then press and hang these 3 buttons:
"Vol down"; Power; Home.
After that everything should be fine.
so my phone is not dead?
do i have to worry,i dont know anything plz tell me?
btw i did what u said and still it is acting in that manner
thanx bro,thank you very much
working fine now
btw how can i restore my phone to previous version?
As long as it is turning on, you don't have to worry.
Take the battery out and put it back in. Start the phone in emergency mode by holding the back button + vol down and then power. You should have an orange yellowish screen with "emergency mode!!" On it.
Reflash the kdz but this time choose 3gqct and emergency instead of diag.
This time wait until it says upgrade finished. Don't unplug it even if it restarts. Until "==== update finished ===="
Edit: got that solved already.
Sent from my LG-P500 using XDA App
gurpreet9080 said:
thanx bro,thank you very much
working fine now
btw how can i restore my phone to previous version?
Click to expand...
Click to collapse
You can downgrade it via KDZ updater tool.
Here.
Dr.Alani said:
As long as it is turning on, you don't have to worry.
Take the battery out and put it back in. Start the phone in emergency mode by holding the back button + vol down and then power. You should have an orange yellowish screen with "emergency mode!!" On it.
Reflash the kdz but this time choose 3gqct and emergency instead of diag.
This time wait until it says upgrade finished. Don't unplug it even if it restarts. Until "==== update finished ===="
Edit: got that solved already.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
bro,do i need to download a v10e file for restoration??
and do i have to ennable usb debugging mode again in the above case of restoration ??
Re-download the same kdz you wanted or anyone else (anything p500).
If you switch to emergency mode there is no need to enable debug.
Sent from my LG-P500 using XDA App
Dr.Alani said:
Re-download the same kdz you wanted or anyone else (anything p500).
If you switch to emergency mode there is no need to enable debug.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
But.. if you booted into emergency mode, do you need to change "Phone Mode" in KDZ updater to EMERGENCY?
droidaem said:
But.. if you booted into emergency mode, do you need to change "Phone Mode" in KDZ updater to EMERGENCY?
Click to expand...
Click to collapse
Yes.
Sent from my LG-P500 using XDA App

return to V10h with 2.3.3 to 2.2.2

LG P500
I Advancement through
impossible to go back to the V20F V10h
or from 2.3.3 to 2.2.2 with KDZ ​​and I put everything comes to an end, but when I turn on the LG-P500 on the boot and stay in the boot nemoze to convert to the main screen WHY. my English is desperate
make hard-reset:
a) Turn off the phone. If Power Off not working, remove the battery.
b) Press and hold ‘Home’ key and ‘Volume Down’ key.
c) With these 2 keys pressed, press Power button and hold till phone starts to boot in reset mode.
rajko34 said:
LG P500
I Advancement through
impossible to go back to the V20F V10h
or from 2.3.3 to 2.2.2 with KDZ ​​and I put everything comes to an end, but when I turn on the LG-P500 on the boot and stay in the boot nemoze to convert to the main screen WHY. my English is desperate
Click to expand...
Click to collapse
So is Google translate too.
Sent from my LG-P500 using XDA Premium App
whether it will then work through V10h returned in this way
if u have flash sucessfully than switch off ur phn and PRESS 3 BUTTON COMBO ( HOME + VOL DOWN +POWER BUTTON ) and it will boot fine .
if not than raed downgrading ur phn in thread
http://forum.xda-developers.com/showthread.php?t=1038338
it will work same way wth the 1 u want to downgrade if it stuck at android logo
rockvoid said:
make hard-reset:
a) Turn off the phone. If Power Off not working, remove the battery.
b) Press and hold ‘Home’ key and ‘Volume Down’ key.
c) With these 2 keys pressed, press Power button and hold till phone starts to boot in reset mode.
Click to expand...
Click to collapse
Thank you a lot of combinations of 3 booton Home, Volume Down, Power solve the problem thank you very much
I would really like to return to Froyo, but... I don't understand what rajko34 did.
Like, the v10 baseband is available but where I can get a stock froyo rom to flash with the LGMDP.exe?
If I flash with KDZ, the baseband is flashed/downgraded too?
Thanks in advance
rajko34 said:
LG P500
I Advancement through
impossible to go back to the V20F V10h
or from 2.3.3 to 2.2.2 with KDZ ​​and I put everything comes to an end, but when I turn on the LG-P500 on the boot and stay in the boot nemoze to convert to the main screen WHY. my English is desperate
Click to expand...
Click to collapse
Hi,
I am replying to this post just want that other should aware about the facts that Downgrading from 2.3.3 (V20) to 2.2.2 (V10) is possible and is successful using KDZ. You just have to take care of some below Points before flashing:
I AM NOT RESPONSIBLE FOR ANYTHING GOES WRONG TO YOUR DEVICE. TRY ON YOUR OWN RISK
1. Always Use latest driver from LG and make sure that your device is disconnected and any previous version of drivers should be uninstalled from "add and remove programs" using Windows XP SP3 system (Including LGE Virtual Modem,etc. etc. ..!!! (The one who already have latest drivers and clean PC won't find "Virtual Modem" in the device manager, So just Chill ) ..Check device manager and uninstall if they still there and also uninstall drivers from other vendors like Nokia, samsung, etc.
2. After uninstalling drivers , restart your system and make sure that your user is an administrator and then install New LG drivers from the LG official website (Just Google== LG P500 drivers ). and Disable LGE Virtual Modem if still its appearing in the device manager.
3. Always make sure that USB Debugging is enabled on the device and your system supports USB 2.0 (High Speed), so notification like "Hi-Speed device is plugged into Non Hi-speed USB" should not appear.!!
3. Extract KDZ_FW_UPD_EN.zip and Install msxml.msi and reboot your system again.!
4. Again you need administrator.!
5. Now Plugged the Device via USB.!, System will install drivers for your device. Wait let the system completes the driver installation .!
6. Unplugged the USB from the phone and Restart the Phone.
7. Wait for the phone to Boot and load completely (Approx 5 minutes).
8. Set Display Brightness timeout to 30 minutes and ensure USB debugging is ON.
9. Plug the device again and keep it at a place where it will not get disturbed. (Also ensure that You have Good working Data Cable, Hope Your Original one is still alive )
10. Open KDZ_FW_UPD.exe, select type "3GQCT" and phonemode "DIAG"
11. Click browse and select "V10E_00.kdz" file from where you have download it, I have used Indian version because I have Indian LG O1. (I recommend V10E_00.kdz because i used it twice and it works lika a charm :victory: )
12. Now the Flashing Part .! :fingers-crossed: ...!!. Click Launch Software Update.!
13. The phone will goes to Emergency Mode (Don't panic).! and the flashing process will start.. ! wait for flashing to complete.! Ensure that your system will not goes on Standby or sleep.! And If you are using a Laptop I suggest you to plug in the power first.!
14. I always make my mouse moving while flashing process is in progress. It make me feel better . So you can also try this
15. The flashing process may take 5-10 minutes to complete. and you phone will restart itself indicating the offline battery charging screen.!
16. Wait until KDZ prompt "FINISHED" in the end of the log.
17. Unplug the USB and wait for 5 seconds and press and hold Home+VolumeUp+Power simultaneously for Hard resetting the phone .
18. When The screen Shows LG Logo leave the buttons and Hard reset will take half a minute to complete.
19. Wait and Let the device Boots ups completely. (First Boot will take 5 minutes to get you to the lock screen)
20. Done.!! Congratulations.! You are now Downgraded to 2.2.2 . :highfive:
Good Luck :good:
IF anything went wrong during the flashing process or KDZ gave you any error in between the process.! Please DONT pull the battery out from the Phone. Else It will HARD BRICK YOUR PHONE.! And u are not even able to get the phone Power on..I mean Dead! Just Find Support on XDA and try and try again.! (Also suggest you to do not unplug the data cable, it may also lead to HARD brick the phone.)
In this situation ensure that you have a right flashing KDZ file. and IF you have the right one use different "phonemode" like Emergency, Emergency_CS, etc and try and try again.!
IF still wont work try to shake your phone and touch the screen again and again and try to launch the software upgrade
If still device is not responding try lgmdp method and try to flash a recovery and Image.
If nothing works restart you system and then again launch the software update in emergency mode.! (This option works for me once but i recommend you to try it as a last choice)
Don't pull the battery out and ask for support on xda.! Might be someone save your phone's life.
If the phone is still stucked you have to get it to the service centre. (If your phone is in warranty they will replace the PCB free of cost)

[Q] Unbrickable?

Hey!
Sorry for creating a new post, but im geting lost...im not a p500 user, just helping my friend to unbrick his p500.
I tried anything kdz method with KDZ_FW_UPD also tried LGMDP, still the only thing we can do is access to emergency mode.
KDZ_FW_UPD shows error, i tried anything possible (ofc installed drivers, disabled lg modem etc...I ALSO TRIED THE SHAKE METHOD )
LGMDP (after extracting, encryptng offical kdz) simply stucks...
any idea?
voga06 said:
Hey!
Sorry for creating a new post, but im geting lost...im not a p500 user, just helping my friend to unbrick his p500.
I tried anything kdz method with KDZ_FW_UPD also tried LGMDP, still the only thing we can do is access to emergency mode.
KDZ_FW_UPD shows error, i tried anything possible (ofc installed drivers, disabled lg modem etc...I ALSO TRIED THE SHAKE METHOD )
LGMDP (after extracting, encryptng offical kdz) simply stucks...
any idea?
Click to expand...
Click to collapse
When lgmdp stucks.u can try again by closing and restarting lgmdp.than it will start from where it stuck.this might help.try out
cure25 said:
When lgmdp stucks.u can try again by closing and restarting lgmdp.than it will start from where it stuck.this might help.try out
Click to expand...
Click to collapse
I tried it many times, but it always started from the beginning. Am I doing something wrong? (it can only be closed from task manager)
is it possible to get a backed up nv and a working dz file?
Lgmdp rocks, if you can access emergency mode then use lgmdp just to flash a custom recovery, then boot to recovery with combo buttons and flash a ROM
Roqu3 said:
Lgmdp rocks, if you can access emergency mode then use lgmdp just to flash a custom recovery, then boot to recovery with combo buttons and flash a ROM
Click to expand...
Click to collapse
I have found a flash image (http://androidforums.com/getitnowmarketing/221388-custom-recovery-optimus-one-p500-thunderg.html) how should i flash it with cmdp? if i try select image, i just get a ton of errors, and the image becomes completely unusable
i cant reach it with adb
Make sure the image is in a extracted folder (not in zip form)..I always get 4 or 5 errors just close each box and then push downolad or start.The top line will stay.Run it anyway if you browsed to the right folder it will flash..wait for DOWNLOAD COMPLETE message DO NOT ABORT at any time before that (up to 10 mins max).usually less.
i miss partition table wich is needed for all other settings, so i get about 10 errors and nothing remains selected
i have a flash_image (without extension)
tried recovery-RA-GNM-thunderg-1.1.0 and AmonRa_3.06_Recovery_ThunderG
still dont know what im missing, any idea?
If u r able to access emergency mode then use kdz updater n flash using android 2.2.2 v20e .just google lg p500 rom link. The only thing u have to do is to select EMERGENCY instead of DIAG.. n do a factory reset after flash..
Press THANKS if i help u..
Sent from my LG-P500 using XDA App
Dont flash a recovery image YET.Flash a p-500 rom first to restore phone. then flash a recovery after.
Bhawan said:
If u r able to access emergency mode then use kdz updater n flash using android 2.2.2 v20e .just google lg india p500 rom link. The only thing u have to do is to select EMERGENCY instead of DIAG.. n do a factory reset after flash..
Press THANKS if i help u..
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
lg download links are unavailable, their site is completely unusable...
i tried to flash v10e with kdz updater, but no matter what i tried, i got an error
(i could easily do it with my p970)
ur6beersaway said:
Dont flash a recovery image YET.Flash a p-500 rom first to restore phone. then flash a recovery after.
Click to expand...
Click to collapse
tried to flash v10e with lgmdp, but it stucked, got error with kdz update
voga06 said:
i miss partition table wich is needed for all other settings, so i get about 10 errors and nothing remains selected
i have a flash_image (without extension)
tried recovery-RA-GNM-thunderg-1.1.0 and AmonRa_3.06_Recovery_ThunderG
still dont know what im missing, any idea?
Click to expand...
Click to collapse
Try TWRP 1.1.1.1XL ? with LGDMP
---------- Post added at 03:31 PM ---------- Previous post was at 03:24 PM ----------
voga06 said:
i miss partition table wich is needed for all other settings, so i get about 10 errors and nothing remains selected
i have a flash_image (without extension)
tried recovery-RA-GNM-thunderg-1.1.0 and AmonRa_3.06_Recovery_ThunderG
still dont know what im missing, any idea?
Click to expand...
Click to collapse
Try TWRP 1.1.1.1 xl with LGDMP. http://lg-p500.zrusit.eu/forum/downloads.php?view=detail&df_id=135
ur6beersaway said:
Try TWRP 1.1.1.1 xl with LGDMP. http://lg-p500.zrusit.eu/forum/downloads.php?view=detail&df_id=135
Click to expand...
Click to collapse
same as before, lots of errors, no partition table
you suggested to flash a rom first, but what if it stucks burning amss?
try to connect the phone at lgmp without battery in emerceny mode.
NEXTevolution said:
try to connect the phone at lgmp without battery in emerceny mode.
Click to expand...
Click to collapse
That is how i was doing it (with battery its bootlooping and i cant connect)
Have u select emergency mode while flashing. If nothing works then remove battery ,sim n sd card wait for some time( 5-10 min). ( install msxml.msi package from the kdz updater zip archive n restart ur pc) after that open kdz updater n then press n hold home+volume down+power after connecting to usb. This will let u enter in emergency mode. Press n hold back key n volume down key for forcefully detect the phone. Be sure that u have kdz updater already opened. Selest 3GQCT in type and EMERGENCY in mode tab. Select ur .kdz official rom n then flash...
Press THANKS if I help you...
Sent from my [email protected] OpTiMu$ On€ [email protected]
BTW phone goes to emergency mode even with battery on and nothing pressed but power button
Bhawan said:
Have u select emergency mode while flashing. If nothing works then remove battery ,sim n sd card wait for some time( 5-10 min). ( install msxml.msi package from the kdz updater zip archive n restart ur pc) after that open kdz updater n then press n hold home+volume down+power after connecting to usb. This will let u enter in emergency mode. Press n hold back key n volume down key for forcefully detect the phone. Be sure that u have kdz updater already opened. Selest 3GQCT in type and EMERGENCY in mode tab. Select ur .kdz official rom n then flash...
Press THANKS if I help you...
Sent from my [email protected] OpTiMu$ On€ [email protected]
Click to expand...
Click to collapse
you didnt mention disabling lg modem, but its needed, isnt it?

Help me fix my phone?

Afternoon guys, so today, I finally found my phone. I moved out this previous weekend and I left it at my old place, my friends figured it'd be hilarious to post something on Facebook or send people texts from my phone, but locked themselves out, and then apparently attempted to restart in recovery mode. Now it's stuck on the LG logo, it's not seen by my computer by LG's software, or KDZ, and I don't want to take it back to the shop and get it replaced because it has all of my stuff on it (And it was rooted with Cyanogenmod installed) Anyone have any other suggestions? Do you think the store will find out or even care if I had Cyanogen installed?
Cheers, Chris.
Also, I apologize in advance if this thread is in the wrong place.
1.does it boot in recovery or not. If it does there is no problem
2.Have you tried wiping dalvik cache and data.
3.you can flash another rom it boots in recovery
Attempt Further
Try all SWISS ARMY methods ;-)
Can you get into RECOVERY???
If so try wiping CACHE,DALVIK,BAT STATS then reboot..else
You can use option MOUNT USB STORAGE(when connected to pc)
and COPY files from sd to pc.
After that Flash a new ROM after a HARD RESET
rishabho1 said:
1.does it boot in recovery or not. If it does there is no problem
2.Have you tried wiping dalvik cache and data.
3.you can flash another rom it boots in recovery
Click to expand...
Click to collapse
No, doesn't boot at all, stuck on the LG logo.
I haven't wiped any caches, I don't have a clue how.
I can get it into Emergency Mode, but KDZ isn't finding the phone, with the modem disabled. The LG software wont update, says there's a problem with the connection between the phone and the computer (My guess would be that it doesn't like Emergency Mode). Does it want a recovery image to be on the SD card?It'd be my first point of call, but I don't have an SD card reader on hand, but if that's all it wants, I could probably find one around.
I usually work with computers, not phones, and to my understanding, this could all be resolved by resetting the bios/removing the CMOS battery for 5 minutes, is there a way to do this on my phone?
do you have lg united drivers because kdz updater picks up the phone even while booting and also if phone is off .
dont use the computer scienve in phones..
what mode are u using in kdz updater
thank me please....
chart75 said:
No, doesn't boot at all, stuck on the LG logo.
I haven't wiped any caches, I don't have a clue how.
I can get it into Emergency Mode, but KDZ isn't finding the phone, with the modem disabled. The LG software wont update, says there's a problem with the connection between the phone and the computer (My guess would be that it doesn't like Emergency Mode). Does it want a recovery image to be on the SD card?It'd be my first point of call, but I don't have an SD card reader on hand, but if that's all it wants, I could probably find one around.
I usually work with computers, not phones, and to my understanding, this could all be resolved by resetting the bios/removing the CMOS battery for 5 minutes, is there a way to do this on my phone?
Click to expand...
Click to collapse
HARD RESET is like removing CMOS battery... but it reverts phone back to ORIGINAL STATE n you will lose all your data and apps..
So Backup all data in SD then PERFORM Hard Reset by:
Pressing Home+Vol.Down+Power
(CAUTION:HARD RESET DELETE ALL USER DATA
rishabho1 said:
do you have lg united drivers because kdz updater picks up the phone even while booting and also if phone is off .
dont use the computer scienve in phones..
what mode are u using in kdz updater
Click to expand...
Click to collapse
Yep, LG United Drivers.
I'm using;
Type: 3GQCT
And Phonetype: Emergency
I still get;
17:29:03 : Launching SW update
17:29:03 : Unpacking KDZ
17:29:06 : KDZ file extraced
17:29:08 : Files were extracted.
17:29:08 : LGMobileDL Load.
17:29:08 : Port = -1
17:29:08 : Connecting to phone
17:29:13 : PHONE WAS NOT FOUND!
17:29:15 : ===FINISHED===
I've read the other threads, and they all say that it's usually the Modem driver, but I've made sure that it's disabled, and the battery's out, so it's getting power from the USB, so I don't think it can be the cable.
u didnt explain what is happening
1when you press power button it gets stuck on lg or what
2 when you press vol up + home + power what happens
you didnt tell correctly
rishabho1 said:
u didnt explain what is happening
1when you press power button it gets stuck on lg or what
2 when you press vol up + home + power what happens
you didnt tell correctly
Click to expand...
Click to collapse
Its like removing CMOS battery of your pc.
But in PC, BIOS Settings are reverted to DEFAULT and OS is not harmed.
Here, Your phone will appear as if you just powered it up after FLASHING CM7
CHECK OUT HERE:
http://forum.xda-developers.com/showthread.php?t=1257134
Press Thanks If I Helped You! ;-)
rishabho1 said:
u didnt explain what is happening
1when you press power button it gets stuck on lg or what
2 when you press vol up + home + power what happens
you didnt tell correctly
Click to expand...
Click to collapse
Sorry I was vague, it gets stuck on the LG symbol. With Vol up , home and power it sits on the LG screen as well.
chart75 said:
Sorry I was vague, it gets stuck on the LG symbol. With Vol up , home and power it sits on the LG screen as well.
Click to expand...
Click to collapse
My mistake it was Vol.down..
thank you. i will try it later
chart75 said:
Yep, LG United Drivers.
I'm using;
Type: 3GQCT
And Phonetype: Emergency
I still get;
17:29:03 : Launching SW update
17:29:03 : Unpacking KDZ
17:29:06 : KDZ file extraced
17:29:08 : Files were extracted.
17:29:08 : LGMobileDL Load.
17:29:08 : Port = -1
17:29:08 : Connecting to phone
17:29:13 : PHONE WAS NOT FOUND!
17:29:15 : ===FINISHED===
I've read the other threads, and they all say that it's usually the Modem driver, but I've made sure that it's disabled, and the battery's out, so it's getting power from the USB, so I don't think it can be the cable.
Click to expand...
Click to collapse
dont take out the battery and use rear usb port and shake ur phone hard to make it detect usually shaking helps
Have you tried shaking the phone?:
http://forum.xda-developers.com/showthread.php?t=883314
laz3r69 said:
My mistake it was Vol.down..
Click to expand...
Click to collapse
Still just that damn LG symbol.
Try These:
http://forum.xda-developers.com/showthread.php?t=1257134
http://forum.xda-developers.com/showthread.php?t=883314
One thing you can always do is brick your phone and take it to lg ppl and say i was playing a game suddenly my phone switched off do this only if in warranty!
or
DO NOT PLUG IN YOUR PHONE UNTIL STEP 3!
1. Went to system restore in windows(you'll find it under Backup and Restore in the Control Panel) and restore your computer to a state before installing any drivers for your phone.
2. After everything had completed, installed LG Mobile update. There is an option to install general USB drivers for your phone, DO NOT do it! Go to Customer Support > Application, Manual & USB driver download. Input your IMEI number from behind the battery in the back of your phone(or just select the "Read your phone" option if you can get it to read your phone). It will search and return the correct drivers for your exact phone. Download and install your USB drivers.
3. Keep your phone disconnected from your PC, and start up LG mobile update again. Connect your phone, LG mobile update should verify the connection by trying to connect to your phone, checking software versions, etc. It will connect even if you are stuck at the LG screen.
4. If everything checks out run KDZ updater and flash your phone back to original specs.
try this this uses lg updater instead of kdz updater
have you flashed a .32 kernel on .35 rom or vice versa?
Press thanx if i helped you..
Sent from LG-P500 using xda premium

[Q] LG Optimus L3 E400 Problem

I tried rooting my LG Optimus L3 E400, and it was successful, so I tried installing CM9 . . . I followed the instructions and it went well . . . but on the part where this robot thing with the blasting blue background appeared . . . it took a long time for it to boot . So I decided to remove the battery since it won't turn off . Then I when I turned it on, the robot booting logo continued . Then I tried turned on normally, but the graphics had a high saturation and the fonts weren't clear anymore . The Superuser was removed, but the ROM Manager was still there . Then I tried KDZ update thing but I always get this error ' Upgrade error WParam: 100, LParam: 6 ' . It said that it would make my phone boot normally, but it didn't . Now I can't charge, the USB logo won't appear, and ask me which USB connection mode to choose .
Got a possible solution!
kayeeah said:
I tried rooting my LG Optimus L3 E400, and it was successful, so I tried installing CM9 . . . I followed the instructions and it went well . . . but on the part where this robot thing with the blasting blue background appeared . . . it took a long time for it to boot . So I decided to remove the battery since it won't turn off . Then I when I turned it on, the robot booting logo continued . Then I tried turned on normally, but the graphics had a high saturation and the fonts weren't clear anymore . The Superuser was removed, but the ROM Manager was still there . Then I tried KDZ update thing but I always get this error ' Upgrade error WParam: 100, LParam: 6 ' . It said that it would make my phone boot normally, but it didn't . Now I can't charge, the USB logo won't appear, and ask me which USB connection mode to choose .
Click to expand...
Click to collapse
Well , i got the sam problem at the moment , and i've been searching the internet for days now to find how to fix it... since i'm not very experienced i can't just go to modifying something in my phone but completely change the rom. With my previous experience with an LG P500 i've found a very good solution using KDZ installer so i've jut googled KDZ LG L3 and apparently it will work on L3 too ... Now i dont know if i'm allowed to post a link , but anyway even with ban it will be worthy if it helps you. The LINK* wow i'm new so i cant post outside links* or if it doesn't work (this is the direct link) : (lg-phones.org/lg-optimus-l3-v10d-firmware-download.html) put www before.
Good Luck! I'm trying this method on my own right now.
mircea98ro said:
Well , i got the sam problem at the moment , and i've been searching the internet for days now to find how to fix it... since i'm not very experienced i can't just go to modifying something in my phone but completely change the rom. With my previous experience with an LG P500 i've found a very good solution using KDZ installer so i've jut googled KDZ LG L3 and apparently it will work on L3 too ... Now i dont know if i'm allowed to post a link , but anyway even with ban it will be worthy if it helps you. The LINK* wow i'm new so i cant post outside links* or if it doesn't work (this is the direct link) : (lg-phones.org/lg-optimus-l3-v10d-firmware-download.html) put www before.
Good Luck! I'm trying this method on my own right now.
Click to expand...
Click to collapse
Uhm, I don't quite understand the instructions . . . can you help me out ?
Is it your USB cable that's broken? Can your computer still detect the phone? And most importantly can you still turn the phone on?
Bloodscythe said:
Is it your USB cable that's broken? Can your computer still detect the phone? And most importantly can you still turn the phone on?
Click to expand...
Click to collapse
No, my friend had an LG Optimus L5 . . . she borrowed my charger yesterday and it charged . . . My phone can't connect to the computer . . . and yes It can turn on . . . but the LG start up logo is broken . . . The part where there's a pink and violet wave . . . it's like a broken television signal .
Unless you can connect your phone to the computer, it'll be really tough to fix... Okay, are you able to launch these things: 1. Emergency Mode: Make sure phone is off. Hold Volume up + down + power button. You should get a yellow screen with the words emergency mode on it.
2. Can you still run Clockworkmod recovery?
3. Try a factory reset. Volume up + Home button + Power button.
This ones tricky if you have CWM installed. Hold down the three buttons until the vibration comes along and quickly let go. It might take a few tries.
Bloodscythe said:
Unless you can connect your phone to the computer, it'll be really tough to fix... Okay, are you able to launch these things: 1. Emergency Mode: Make sure phone is off. Hold Volume up + down + power button. You should get a yellow screen with the words emergency mode on it.
2. Can you still run Clockworkmod recovery?
3. Try a factory reset. Volume up + Home button + Power button.
This ones tricky if you have CWM installed. Hold down the three buttons until the vibration comes along and quickly let go. It might take a few tries.
Click to expand...
Click to collapse
I can make it go to Emergency Mode . . . and yes, I can still run Clockworkmod recovery excpet for Factory Reset . When I press Volume up + Home Button + Power Button . . . it just flashes then turns off . How do you hold down three buttons ? is it Volume buttons + Home button + Power button ?
kayeeah said:
I can make it go to Emergency Mode . . . and yes, I can still run Clockworkmod recovery excpet for Factory Reset . When I press Volume up + Home Button + Power Button . . . it just flashes then turns off . How do you hold down three buttons ? is it Volume buttons + Home button + Power button ?
Click to expand...
Click to collapse
If you can still make it into emergency mode and CWM, that's good. Okay, first, go into CWM and WIPE EVERYTHING. Data, cache, dalvik cache. Wipe them all. Then, put your phone into emergency mode. Try to connect your phone to your computer and try to use the Kdz flasher again. IF this fails then download this:
http://www.shabbypenguin.com/OUDstuff/LG-E400/stockrom+.zip
And flash it in CWM. It's probably in a different country then yours but it's better than nothing.
Bloodscythe said:
If you can still make it into emergency mode and CWM, that's good. Okay, first, go into CWM and WIPE EVERYTHING. Data, cache, dalvik cache. Wipe them all. Then, put your phone into emergency mode. Try to connect your phone to your computer and try to use the Kdz flasher again. IF this fails then download this:
And flash it in CWM. It's probably in a different country then yours but it's better than nothing.
Click to expand...
Click to collapse
After wiping them all, will I reboot ?
kayeeah said:
After wiping them all, will I reboot ?
Click to expand...
Click to collapse
No. Turn off your phone then launch emergency mode.
Bloodscythe said:
No. Turn off your phone then launch emergency mode.
Click to expand...
Click to collapse
How do you use stockrom+ ?
kayeeah said:
How do you use stockrom+ ?
Click to expand...
Click to collapse
That one is kinda tough. Unless you know how to use ADB there's not really a way to get it on to your phone. Its like the CM9 installation. Just install exactly the same way as you did for CM9. Try fixing your phone with kdz flasher first. Don't forget to put in 3QCT and Emergency modes first.
Bloodscythe said:
That one is kinda tough. Unless you know how to use ADB there's not really a way to get it on to your phone. Its like the CM9 installation. Just install exactly the same way as you did for CM9. Try fixing your phone with kdz flasher first. Don't forget to put in 3QCT and Emergency modes first.
Click to expand...
Click to collapse
I clicked on Launch Software Update and it didn't work ):
Actually, are you using the CM9 rom or did you restore a backup? Also, try mounting your phone in CWM, connect your phone to computer and see if your computer picks up anything. What does it say when you launch software update anyway?
Bloodscythe said:
Actually, are you using the CM9 rom or did you restore a backup? Also, try mounting your phone in CWM, connect your phone to computer and see if your computer picks up anything. What does it say when you launch software update anyway?
Click to expand...
Click to collapse
Yes, and I dunno how to mount CWM . . . and It says the same error . . . Param: 6 . . .
In CWM, there is a menu named mounts and storage. In there will be a sub menu called mount USB storage. Go into it. You'll see the only option in there is BACK. At this point, connect phone to computer. See if you have connection. I have to ask, do you know how to use KDZ flasher. Please tell me step by step as to what you did.
Hi!
My LG L3 E400 is bricked. When i try to turn it on,it vibrates and the LG logo appears and thats it. Hard reset,recovery mode or anything else is not possible to do. The only thing i can do is emergency mode. I was trying with software update kdz with stock .kdz files (V10G_00.kdz and V10A_00.kdz) but i got an error (Wparam 100 Lparam 2) Same thing on two different computers (Xp and 7,drivers installed...).
Is there any other way to make him alive?
Sorry for my bad English. :good:
kayeeah said:
After wiping them all, will I reboot ?
Click to expand...
Click to collapse
I cant get in clockworkmod... What should I do?
Hello i have a lg e400r and iam try to flash firmware v10N_00.kdz with kdz updater
and i hqve problems i cant flash firmware the kdz show me error on 99percent the phone reatarts and it stays on lg logo and a white screen dont boot normaly
i cant get to cmw and i cant do a hard reset but the phone it turn on
what i need to do to fix it??
Anyone an idea.?

Categories

Resources