got stuck on android screen after update,plz help - Optimus One, P500, V General

help me plz,,,,,
i updated my phone to v20c and restarted but it got stuck on android screen (android animation working) almost 20mins are up but nothing proceeds further.plz help me urgent

Do a factory reset.
Turn phone off, then press and hang these 3 buttons:
"Vol down"; Power; Home.
After that everything should be fine.

so my phone is not dead?
do i have to worry,i dont know anything plz tell me?
btw i did what u said and still it is acting in that manner

thanx bro,thank you very much
working fine now
btw how can i restore my phone to previous version?

As long as it is turning on, you don't have to worry.
Take the battery out and put it back in. Start the phone in emergency mode by holding the back button + vol down and then power. You should have an orange yellowish screen with "emergency mode!!" On it.
Reflash the kdz but this time choose 3gqct and emergency instead of diag.
This time wait until it says upgrade finished. Don't unplug it even if it restarts. Until "==== update finished ===="
Edit: got that solved already.
Sent from my LG-P500 using XDA App

gurpreet9080 said:
thanx bro,thank you very much
working fine now
btw how can i restore my phone to previous version?
Click to expand...
Click to collapse
You can downgrade it via KDZ updater tool.
Here.

Dr.Alani said:
As long as it is turning on, you don't have to worry.
Take the battery out and put it back in. Start the phone in emergency mode by holding the back button + vol down and then power. You should have an orange yellowish screen with "emergency mode!!" On it.
Reflash the kdz but this time choose 3gqct and emergency instead of diag.
This time wait until it says upgrade finished. Don't unplug it even if it restarts. Until "==== update finished ===="
Edit: got that solved already.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
bro,do i need to download a v10e file for restoration??
and do i have to ennable usb debugging mode again in the above case of restoration ??

Re-download the same kdz you wanted or anyone else (anything p500).
If you switch to emergency mode there is no need to enable debug.
Sent from my LG-P500 using XDA App

Dr.Alani said:
Re-download the same kdz you wanted or anyone else (anything p500).
If you switch to emergency mode there is no need to enable debug.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
But.. if you booted into emergency mode, do you need to change "Phone Mode" in KDZ updater to EMERGENCY?

droidaem said:
But.. if you booted into emergency mode, do you need to change "Phone Mode" in KDZ updater to EMERGENCY?
Click to expand...
Click to collapse
Yes.
Sent from my LG-P500 using XDA App

Related

LG Optimus one p500 struck in Emergency mode

Hi,
I tried to flash it from the KDZ software but it left the phone in emergency mode. I tried taking the battery out but no luck.
Please help.
Do you still have the custom recovery?
http://forum.xda-developers.com/showthread.php?p=10268452#post10268452
post 53....good luck
http://forum.xda-developers.com/showthread.php?t=883314
I'm not sure about, but if you failed in flashing, it's better don't turn phone off (removing battery). It can happen that it will never boot up! Just try flash it again with some other modes (recovery should be right, but some people say, that also another type of communication worked).
Same thing happened for me. PC was not detecting the phone. Then I removed battery and plugged data cable, then came to normal
Sent from my LG-P500 using XDA App
vivu.vivek said:
Same thing happened for me. PC was not detecting the phone. Then I removed battery and plugged data cable, then came to normal
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
If you don't started flashing in emergency mode yet, than yes, you can restart it as you want, but if you already started flash some data in recovery mode and it fails, it will be definitely better to try do that again without turning off, because there is high possibility of braking of device.
Boots straight into emergency Mode
Hi guys, I tried to update the phone using the LG Mobile Update and for some unknown reason it was stuck at 4% and the update process interrupted itself. The phone had emergency Mode in it, I removed the battery, placed it back the phone turned on fine, checked out the version and it was on 2.2.1 (the version I had, didn't update).
I decided to retry (stupid decision) and the same thing happened except that now. I remove the battery and it goes straight into Emergency Mode. Tried updating through the KDZ Tool and it does not recognize the phone, there doesn't seem to be a "Handshake" between the PC and the Phone.
Is there anyway that maybe I can force the Phone to mount (on a Linux Box maybe) and use some other Tool to flash it?? Or did I just turn my phone into Paperweight?.
BTW, this is my girlfriend's phone and I kind of got her into giving me her phone to update it, so yeah... I feel like **** for doing this.
Forgot to mention,
Tried:
Removing the battery for a while (15 min +)
Turning on the phone while holding "Home + Volume Down" and "Home + Volume Down + Search"
Thanks in advance.

Emergency Mode??

My girlfriend has an LG Optimus T and she has a consistant issue with it entering Emergency Mode. She will shut it down, but when restarting, it goes directly into Emergency Mode. She has to pull the battery for at least 5 min, sometimes 10 before she can reboot normally. Any ideas what is going on? Thanks in advance.
Sent from my SGH-T959 using XDA App
the only chance is to use kdz http://forum.xda-developers.com/showthread.php?t=883314 or if you have a custom recovery installed flash another rom
The phone just randomly boots into emergency mode by itself? To get in, you need to press up and back button during the LG home screen so maybe there is a problem with corrupted rom, is it rooted/custom recovery? Has there been any modification to it or is it on stock?
AzNxJoHnNy said:
The phone just randomly boots into emergency mode by itself? To get in, you need to press up and back button during the LG home screen so maybe there is a problem with corrupted rom, is it rooted/custom recovery? Has there been any modification to it or is it on stock?
Click to expand...
Click to collapse
No it doesn't do it randomly by itself. Just when she manually powers off her phone. It will shut down and power off okay, but when restarting it goes directly into Emergency Mode and won't boot normally unless the battery is pulled for at least 5 min. If we try and put the battery back in too soon it just goes directly back into Emergency Mode... have to wait it out. Phone is rooted, and no custom rom.
Sent from my SGH-T959 using XDA App
I'd try to switch into emergency mode manually. I have no idea if this helps, but you can try...
Sent from my LG-P500 using XDA App
I have the same problem! I use Void Echo, but i used to have stock rom and still get that boot error... My guess is that it's a bootloader error, so maybe uninstalling the custom recovery and reinstalling it will fix this.

HELP: Dead phone LG P500

Sorry if a topic in the wrong section ...
The problem is this: After a failed firmware phone, my phone will not run at all, tried to include a variety of ways, there is no reaction at all, black screen does not work ... do not turn on ..
Is there a solution how to cure a dead mode?
thats pretty vague. looks like you have a bricked phone but describe what you did
update the phone via KDZ. KDZ has written a mistake, still gleaming yellow screen, turned off the phone and all ... more it is not included ... help ....
http://forum.xda-developers.com/showthread.php?t=1183579
emergency mode not included....
Manitikyl said:
emergency mode not included....
Click to expand...
Click to collapse
what do you mean not included !?
read this >>
http://forum.xda-developers.com/showthread.php?t=1197111
Manitikyl said:
emergency mode not included....
Click to expand...
Click to collapse
i believe emergency mode is back+volume up+power
telephone does not ring at all the reactions ...
Please don't use google translate! It sucks!
sweetnsour said:
i believe emergency mode is back+volume up+power
Click to expand...
Click to collapse
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
InfiniteRisen said:
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
Be careful, one of those key combination will reset the phone to factory defaults.
And it doesn't ask for permission when it does...
InfiniteRisen said:
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
this is to boot into recovery. im talking about emergency mode
Da_Android said:
Be careful, one of those key combination will reset the phone to factory defaults.
And it doesn't ask for permission when it does...
Click to expand...
Click to collapse
a factory reset will be performed if you dont have a custom recovery. if you do have one, this is the combo to boot into it
from my thread >>>
Hello,
- i'm the proud owner of an LG P500, i mannaged to "kill" it alot of times, one time i bricked it so bad the power button was useless. I'm going to tell you how i always manneged to fix it.
1. - install the USB DRIVERS for LG P500 Download LINK
2. - extract the KDZ archive , install msxml.msi, Download LINK, Download Froyo 2.2.2. v10E.kdz after that open >> KDZ_FW_UPD.exe, select type 3GQCT and mode DIAG (select this only if your phone starts when you connect the USB and the battery charging logo apears) if the phone starts in Emergency Mode or dosen't start at all >> remove battery and while holding the BACK and volume UP buttons connect the USB, the phone should start in Emergency Mode, after that select in KDZ, MODE > EMERGENCY, select file > V10E_00.kdz and press the "Launch software update" .
- wait for KDZ to do it's job ( until it says FINISHED) after it is finished it will reset the phone (alot of times the phone wolden't start after reset and i had to start it manualy @power button) an LG logo should apear , then an Android logo, wait about 5 - 10 min (the phone should start and you will have froyo 2.2.2. working), but if the Android LOGO stops or lags for 2,3 seconds then you must remove battery , put it back , and power on the phone. if it dose the same thing , then you must reflash your phone. Usualy it works with the battery on and simply flashing under DIAG mode.
- after reflashing if you have the same problem , you must remove battery and try installing it DIAG mode. if it still dosen't work enter emergency mode ( UP + BACK + connect USB (or press the power button)) and reflash using KDZ , MODE >>> EMERGENCY.
- when phone is connected go to COMPUTER > PROPERTIES > DEVICE MANAGER > MODEMS > and disable LGE Modem.. (some say it helps i diden't saw any difference.)
- as i was saying i killed my phone alot of times, KDZ always helped me bring it back to life , be patient.. and if you get alot of errors and flash meny times the phone gets hot , leave it to cool for a while and then try again.
be patient !! hope this will help you ..
sorry for my bad english !!
you really need to stop posting that without giving proper credits
these links cover exactly what youve said
http://forum.xda-developers.com/showthread.php?t=1060121
http://forum.xda-developers.com/showthread.php?t=875881
Sent from my LG-P500 using XDA Premium App

bricked my phone??

Someone Please help me! I tried rooting my phone using the no flash counter methos. Long story short my computer froze and I did not know what to do, I unplugged my phone. Now it says "firmware upgrade encountered an issue. please select recovery mode in kies and try again" At this point i dont care about my data, i just want my phone to work again! can anyone please help me, i only havce access to a computer for the next 4 hours!
Go into download mode and use Odin to get into the stock tar file then u should be cool. Check out the dev section
Sent from my SAMSUNG-SGH-I717 using xda premium
Try this
http://forum.xda-developers.com/showthread.php?t=1696443
Sent from my SAMSUNG-SGH-I717 using xda premium
how do i get into download mode when it is stuck on this screen that says "firmware upgrade encountered an issue. PLease select recovery mode in kies and try again" please help me!
if anyone can help i would greatly appreciate it! pretty much if i pull the battery and try to get it into download mode, and press volume up, it gets stuck on the screen i posted above, what can i do??
Its hold volume DOWN...and and hold power button....then when it comes on let go of power then releaseing volume ..that's download.. a menu will pop up
pull battery..get into download mode and reflash..or
http://forum.xda-developers.com/showthread.php?t=1483113
use Da_g method and worry about the counter reset at some other point in time!!
wish777 said:
Its hold volume DOWN...and and hold power button....then when it comes on let go of power then releaseing volume ..that's download.. a menu will pop up
Click to expand...
Click to collapse
i think i am doing it correctly, it says warning a custom os etc etc. volume up continue, volume down, cancel. i press volume up then i get the screen firmware error.
can u get to cwm? press and hold power button and both volume up and ..upon first vibrste release power button
mejori said:
can u get to cwm?
Click to expand...
Click to collapse
please mejori please help me. how do i get to cwm? all i know is that when i hold power and volume down it asks if i want to instal a custom os. i hit volume up, then it gets stuck on the screen that says "firmware upgrade encountered an issue. please select recovery mode in kies and try again" What should i do? can anyone else help me or chat with me? i really need to fix my phone!
take it easy ... try pulling battery and getting into download mode again like wish777 described ..if that works then follow the link i posted..
does odin still recognize the phone???
I can't speak from experience because I've never owned the note but over in tmobile Galaxy S II theres a thread like this. Is it black screen with red font on it saying firmware error? If so its the same unrecoverable boot loop I saw.
Sent from my SGH-T989 using xda premium
mejori said:
take it easy ... try pulling battery and getting into download mode again like wish777 described ..if that works then follow the link i posted..
does odin still recognize the phone???
Click to expand...
Click to collapse
like i said i dont think it cant get into download mode, the poster above this stated its an endless loop, i think thats whats happening to me
Rileyrealz said:
I can't speak from experience because I've never owned the note but over in tmobile Galaxy S II theres a thread like this. Is it black screen with red font on it saying firmware error? If so its the same unrecoverable boot loop I saw.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
i think this is what i am having. is there any solution on that thread?
The mode your describing is download mode but you'll have to vol up to go into the mode. As for your cwm question, try a battery pull then insert while holding up and down and power, when you feel the first vibration let go of power and continue to hold the Vol buttons until your recovery opens,if it will. I would be pleased to know download mode works and forget about cwm of its not working. Odin back to stock then try again. Also when you think your phone or computer "freezes" give it more time to finish processes. Don't be hasty.
Sent from my SAMSUNG-SGH-I717 using XDA
you might be stuck fixing this for a while!! ..try these links..you will have to do some research .. these links are for international note DO NOT FLASH ANYTHING FROM THOSE LIKNS!!! its just to guide you in the right direction (hopefully)
http://forum.xda-developers.com/showthread.php?t=1515379&page=3
tyler79durdan said:
The mode your describing is download mode but you'll have to vol up to go into the mode. As for your cwm question, try a battery pull then insert while holding up and down and power, when you feel the first vibration let go of power and continue to hold the Vol buttons until your recovery opens,if it will. I would be pleased to know download mode works and forget about cwm of its not working. Odin back to stock then try again. Also when you think your phone or computer "freezes" give it more time to finish processes. Don't be hasty.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
i tried what you stated but i keep getting stuck in the first screen. how can i tell if odin recognizes the phone? is it when the yellow box comes up with the com? if i see that, what can i do to fix this?
if the yellow box comes up with a port number than yes it recognizes the phone..follow the odin instructions carefully ..
take your time !!!
mejori said:
if the yellow box comes up with a port number than yes it recognizes the phone..follow the odin instructions carefully ..
Click to expand...
Click to collapse
ok so odin is up and it is yellow, and says 0:[COM4] what are the next steps?
**edit** do i need to download any files?
Yes you do!!
appdroid said:
how to root your note????
There are two root methods for your att galaxy note!
1 which uses kernel to root.
2 this one flash with odin but in system level not boot kernel.
#1 root by da_g!
#2 root by mashi!
Click to expand...
Click to collapse

[Q] Help..brick or what,show LG logo and restart

Hello everyone!! Have problem with my E970...everything was ok before I try to flash new rom ATT-Stock-E97020j, on 50% installation phone has turned off...after he only show LG logo and black screen and restart all the time!! i Try to repair him with Tennybin and flash with LGNPST (evrerything go well, slick) but my phone again only show lg logo and restart all the time. I can only put him into download mod when he is connect on usb, can't go into recovery mode, when I disconnect him from usb no sign of life...
Rooted, unlocked, I have TWRP backup but can't go into recovery :crying:
Sorry for my bad english!!
Thanks
EDIT: something is happened when I try with teenybin(alt) file, red light is blinking, vibrate on power key press, when I push power+vol up I see recovey mod on few seconds but he make restart again and red light is blinking all time ...all this is happened when is phone connect on usb, after disconnect he is dead... Is maybe some problem with battery
Dony28 said:
Hello everyone!! Have problem with my E970...everything was ok before I try to flash new rom ATT-Stock-E97020j, on 50% installation phone has turned off...after he only show LG logo and black screen and restart all the time!! i Try to repair him with Tennybin and flash with LGNPST (evrerything go well, slick) but my phone again only show lg logo and restart all the time. I can only put him into download mod when he is connect on usb, can't go into recovery mode, when I disconnect him from usb no sign of life...
Rooted, unlocked, I have TWRP backup but can't go into recovery :crying:
Sorry for my bad english!!
Thanks
Click to expand...
Click to collapse
Use the "alt teenybin" in LGNPST. You should then be able to get into recovery by pressing vol up + power.
Sent from my Optimus G using xda app-developers app
mikeylikey said:
Use the "alt teenybin" in LGNPST. You should then be able to get into recovery by pressing vol up + power.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
Yes I was try with "alt teenybin"...you can see my edit post up!
- teenybin - no change
-"alt teenybin"- vibrate on power, red light blinking, recovery mode on vol up +pwr but restart again
- ATT E970 20j Stock .bin: LGE970ATT-V20j-Stock.bin.zip with LGNPST - NO CHANGE
Thanks
Dony28 said:
Yes I was try with "alt teenybin"...you can see my edit post up!
- teenybin - no change
-"alt teenybin"- vibrate on power, red light blinking, recovery mode on vol up +pwr but restart again
- ATT E970 20j Stock .bin: LGE970ATT-V20j-Stock.bin.zip with LGNPST - NO CHANGE
Thanks
Click to expand...
Click to collapse
Sounds like a dead battery. Plug it into the wall charger for at least a couple of hours and then see if you can get into recovery. Worse case, may need to do a battery pull. It can be done and is fairly easy...you just need the proper tool.
Sent from my Optimus G using xda app-developers app
mikeylikey said:
Sounds like a dead battery. Plug it into the wall charger for at least a couple of hours and then see if you can get into recovery. Worse case, may need to do a battery pull. It can be done and is fairly easy...you just need the proper tool.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
I will try this, don't see any other solution!!
http://forum.xda-developers.com/showthread.php?t=2039707
Dony28 said:
Yes I was try with "alt teenybin"...you can see my edit post up!
- teenybin - no change
-"alt teenybin"- vibrate on power, red light blinking, recovery mode on vol up +pwr but restart again
- ATT E970 20j Stock .bin: LGE970ATT-V20j-Stock.bin.zip with LGNPST - NO CHANGE
Thanks
Click to expand...
Click to collapse
Yes if you can sit in recovery mode, your battery *should* charge there.
[r.]GimP said:
Yes if you can sit in recovery mode, your battery *should* charge there.
Click to expand...
Click to collapse
I can't, he restart immediately. Only download mode when I connect him on usb
Heh i FIX my phone!!! Thanks to xj220gt for useful post " Unbrick phone part: Rapidly Flashing Red Light."
I was disconnect battery on 15 min and after that I was able to enter in recovery

Categories

Resources