Hi there,
I rooted my phone. I've installed Cyanogenmod 7 and enjoyed it. However, it is SIM locked. I purchased an unlock code... but now I can't enter it.
This person had the same problem:
http://forum.xda-developers.com/showthread.php?t=1313393
Cyanogenmod does not prompt to unlock even with a foreign SIM card.
The solution was to revert to a stock firmware. Which is great... except for the fact that my phone's model number is:
i5500m.
It's the dreaded Canadian version. I can't find firmware for it anywhere. I've tried Check FUS:
Product Code: GT-I5500YKMVMC
No firmware info retrieved for given data.
Generally it seems like I only have two solutions... and one failure.
The first solution is to find a stock firmware for this phone. Or receive a backup from someone who has the stock firmware with Clockworkmod.
The second solution is to enter the unlock code without the prompt. Is there a way, an app, or a hack to do something like this?
My failure is to accept that there's no reverting. But I don't really want to do that.
Oh, and thank you for welcoming me into your forums. XDA Developers is a really amazing site. I've thanked it plenty of times for saving my ass.
Thanks for your time,
Sacrosaint.
Your answer may be found here:
http://forum.xda-developers.com/showthread.php?t=1149110
Look closely at the latest changelog and notice that point 12 states -
"Network: SIM lock messages will no longer be ignored. This may help people who have problems using SIM cards that require a PIN unlock."
Good luck
________________________________________________
Please press "Thanks" if you found me helpful.
i5500
CM7 1.9 hf3
I5500BVJJP9
Thank you so much! I missed that update by only two days. I'm sure this will help many people.
I'll edit this post with my results once completed.
Thanks again!
Sacrosaint.
---------------------------------
Results:
So I updated the ROM. I did not do a data-wipe. I inserted a foreign SIM card. It says it's connected but I'm not getting any service... I don't believe it's unlocked, as I haven't entered a code yet.
Perhaps I should do a data-wipe and retry. I'll repost afterward.
---------------------------------
Potential Final Update:
Odd! I inserted a Rogers SIM card into my phone running CyanogenMod and although no unlock code appeared... it worked. Also known as: my phone is unlocked.
Some interesting thoughts concerning this:
My phone model is i5500m. It comes locked to Bell or Virgin Mobile in Canada.
Upon trying the bml5 unlock method, my code came up as "01234567." Others experiencing this problem concluded that the phone was hard locked.
However, it would appear that flashing this ROM effectively removed the SIM lock. That means that originally, the SIM lock was a part of the firmware. That is slightly scary. I wish I would have come to this conclusion earlier, however, as I paid a premium of $40 dollars to unlock it (at least I supported a local business.)
So: for i5500m or Canadian Samsung Galaxy 5 users to unlock their phones, they must simply root and flash a custom ROM. Originally mine was from Bell, and it has worked with a Rogers SIM card. I'll possibly update this tomorrow when I try the phone with a Koodo SIM.
Hope this helps someone out there.
Sacrosaint
Sacrosaint,
I have an unlocked GT-I5503YKAINU running baseband I5500LUYJP2 and ROM CyanogenMod-7.2.0-RC0-galaxy5-v1.9. I inserted a Virgin Mobile Canada SIM card and do not get Service. With a Rogers SIM card, I do get Service. I spoke to people at Virgin and they said it's because my phone doesn't support HSPA+. The reason it works with Rogers is because it supports GSM.
I'm wonder if there's a way to install the baseband firmware from GT-I5500YKMVMC and still use CyanogenMod-7.2.0-RC0-galaxy5-v1.9?
asawrup said:
Sacrosaint,
I have an unlocked GT-I5503YKAINU running baseband I5500LUYJP2 and ROM CyanogenMod-7.2.0-RC0-galaxy5-v1.9. I inserted a Virgin Mobile Canada SIM card and do not get Service. With a Rogers SIM card, I do get Service. I spoke to people at Virgin and they said it's because my phone doesn't support HSPA+. The reason it works with Rogers is because it supports GSM.
I'm wonder if there's a way to install the baseband firmware from GT-I5500YKMVMC and still use CyanogenMod-7.2.0-RC0-galaxy5-v1.9?
Click to expand...
Click to collapse
What the representative said was true.
Virgin is both HSPA+ and CDMA. The Galaxy 5 IS a GSM phone. Its radio will not work with other frequencies.
You will want to go with Bell, Rogers, Telus, Fido, or Koodo, the GSM suppliers, my friend.
Related
Hello all
I recently got a great deal for a Vibrant (150$ contract free, looking brand new ).
I live in Europe and I already own a Galaxy S, so I thought "hacking" the Vibrand would be a piece of cake... well it wasn't Finally after reading a ton of stuff here on the forums I managed to beat it using Odin.
After finally getting root the first thing I did was to download Galaxy S unlocker from the Market so I could use it with a local SIM card... and it failed. The app couldn't find any codes? and neither the root or non-root method worked.
The Vibrant recognizes that there's a SIM card, and even asks me for a PIN on boot... then nothing happens. When I try to make a call, "Data network not available" is displayed.
The network here is GSM 900/1800.
I'm currently on the deodexed KB5 2.2 ROM flashed via CWM.
Any help would be greatly appreciated
Hmm...I believe there was another method to unlocking it other than the Galaxy S unlocker program you have. It will require root which you have.
Search around the Vibrant forums, I think it was from at least a few months back.
}{Alienz}{ said:
Hmm...I believe there was another method to unlocking it other than the Galaxy S unlocker program you have. It will require root which you have.
Search around the Vibrant forums, I think it was from at least a few months back.
Click to expand...
Click to collapse
Yes, I found it but I'm not sure wheter it's a lock issue (it said "no codes found") or I have to flash an European modem or something. I'll try it anyway and report any results.
No luck
All the methods work for 2.1 and I'm on Froyo KB5.
Plus it's not really an unlock code issue..
It's rather... the SIM card doing nothing.
- Is it insearted?
Yes
- Does the phone recognize there's a SIM card?
Yes
- If you have a PIN, does it ask for it on boot?
Yes
- Well what's wrong then?
I can't do anything else with the SIM... not even join a network
Did you per any chance lock your SIM card with a PIN code?
Cause if you did, it is asking for the code that you locked it with. . .
Try another, UNLOCKED SIM card just to be sure that's not the issue.
The phone SHOULD ask you for an unlock code only. A pin code request (unless you are reading the unlock code as a pin code) means the SIM card is locked.
The card was unlocked, I put the PIN on purpose later, just to see if it'd recognize that
Then what is the issue? Without the PIN, it recognizes the SIM and loads up fine but doesn't get on any network?
Yes!
And that way it's just a VERY overpowered iPod touch. Would be nice if I could actually make phone calls from it, but if not - whatever.
I remember anything above 2.1 theres an issue with the SGS unlocker on the market. I had to use a different method, and I don't remember where I received the instructions from, but I did find this for you on youtube. Please do watch the whole video as the person has the same problem, but runs you through the steps to unlocking by using a different method.
http://www.youtube.com/watch?v=Swe5O5pChyo
gosh... no dice.
The phone never asks me for any unlock code, just stuck on "Searching"
Try a different modem. If not then try a different rom..may be?
Why not just odin back to stock,reroot, and try to unlock it before flashing a rom
Sent from my GT-I9000 using XDA Premium App
Will try that in the evening and report outcome ^^
Hey guys hope you can help me.
I bought the code to unlock the network on my galaxy i9100, currently is locked to telcel mexico.
The thing is that I put in an AT&T sim card and no imput is displayed to enter the unlock code, when I put a T-Mobil sim card a blue lock is displayed saying Network Lock and a button sayin dismiss but no input to capture the code.
So what should I do? I was seaching in several posts and I think that changing the rom to another not from telcel can allows me to capture the unlock code, do you know if that is true? if so, can you tel me, what ROM is compatible to my samsung galaxy I9100 from Mexico ?
Thanks.
SIM Unlock SGS2 Telcel
Hi, I got last week my SGS2 for Telcel and I'm afraid you waste your money with the code, don't worry I also bought an usefulness code.
I did these steps:
DIAL *#SIMLOCK# (7465625) you will have a popup displaying Personalization status, the option NETWORK LOCK [YES] means your mobile is locked for TELCEL, the other options displays OFF.
IF you have NETWORK LOCK [OFF] means your mobile is SIM unlocked.
First you need to root your device, look in the forum how to do that and download busybox.
Well to unlock download from the market the app Galaxy_S Unlock market.android.com/details?id=com.helroz.galaxysunlock (it works with S and SII)
Open the app and follow steps, WARNING there are two steps for number two, I used second one.
Once finished, reboot the mobile and dial one more time *#SIMLOCK# you will have now NETWORK LOCK [OFF]
However I installed a SIM from IUSACELL it doesn't work, what worked for me was downgrade the the version to 2.3.3 reboot with IUSACELL simcard adn voila it is working. After IUSACELL simcard is accepted I upgraded to 2.3.6
You can change the version, root, no matter which change, even restore to Telcel image and the mobile will continue unlocked.
I hope it works for you, if you have any problem just let me know via DM or my twitter @D4N13L0G
hugeband said:
Hi, I got last week my SGS2 for Telcel and I'm afraid you waste your money with the code, don't worry I also bought an usefulness code.
I did these steps:
DIAL *#SIMLOCK# (7465625) you will have a popup displaying Personalization status, the option NETWORK LOCK [YES] means your mobile is locked for TELCEL, the other options displays OFF.
IF you have NETWORK LOCK [OFF] means your mobile is SIM unlocked.
First you need to root your device, look in the forum how to do that and download busybox.
Well to unlock download from the market the app Galaxy_S Unlock market.android.com/details?id=com.helroz.galaxysunlock (it works with S and SII)
Open the app and follow steps, WARNING there are two steps for number two, I used second one.
Once finished, reboot the mobile and dial one more time *#SIMLOCK# you will have now NETWORK LOCK [OFF]
However I installed a SIM from IUSACELL it doesn't work, what worked for me was downgrade the the version to 2.3.3 reboot with IUSACELL simcard adn voila it is working. After IUSACELL simcard is accepted I upgraded to 2.3.6
You can change the version, root, no matter which change, even restore to Telcel image and the mobile will continue unlocked.
I hope it works for you, if you have any problem just let me know via DM or my twitter @D4N13L0G
Click to expand...
Click to collapse
Thanks a lot for answer my question, I will root my device then.
Can you tell me, where did you get the roms? to downgrade to 2.3.3 and the other to upgrade 2.3.6.
Thanks.
pzyklone said:
Thanks a lot for answer my question, I will root my device then.
Can you tell me, where did you get the roms? to downgrade to 2.3.3 and the other to upgrade 2.3.6.
Thanks.
Click to expand...
Click to collapse
you can find them in this thread.
http://forum.xda-developers.com/showthread.php?t=1075278
Cosmic Blue said:
you can find them in this thread.
http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
Thanks for your help guys
What ROM is compatible, I downloaded one from the link above, one from telcel, and works fine the problem is that when I switch the sim card it says that is network locked, so I need another ROM but i dont know what is compatible with telcel, any help?
Thanks
thanks to hugeband here is the guide that he sent to me to downgrade the galaxy s2(telcel), the only proble, that I had, was that i return to android 2.3.6 from telcel, and the Rom is locking the sim card again....
to get the guide please send me a PM or to hugeband and we will send you the URL.
There's something odd, I unlock the galaxy s2 with the method described here and I am pretty sure that it is woking, since my GS2 is using now a T-Mobile sim card, well, the odd thing is when I switch the sim card for an AT&T sim card, the GS2 is still displaying the sim card error message.... I don't have the telcel rom anymore but this message is still happening. Odd thing.
Similar problem
Hi i have a similar problem. my network block is off but I still can't use my iusacell sim. The problem is that i am already in 2.3.3. What should I do?
The problem is that Telcel's modem is a locked one, so even if your device is "technically" unlocked, the modem file will keep popping that annoying lock thing.
1) Dial this from your phone*#7465625#
2) If you have the network lock off, go to next step, otherwise try to follow the second post of this threat until your network lock is off.
3) Flash any rom (or modem file if you wish to keep telcel's crappy apps) from here http://forum.xda-developers.com/showthread.php?t=1075278 After carefully reading the guide posted by Intratech and then try to switch sim cards again.
*As always be very careful before flashing anything and read all of the instructions. No one can take responsibility if you mess something up except for yourself... If you follow the instructions to the letter you should have no problems, as myself and others have done this before.
*If you have any more questions please post them in this threat so more people can learn, I will not respond to PMs.
http://forum.xda-developers.com/show....php?t=1075278 Not working anyother links or forum?? i cant seem to unlock mines, same telcel i tried helroz method but still cudnt work but wen i dial *#7465625# everthing is off
Hi, and firstly, thanks to any and all who offer their knowledge to assist my conundrum.
I recently purchased a Bell Canada version of the SG Note 2 (i317), I am on Telus so I attempted to Unlock the phone. I looked online and found people were having success unlocking these phones for free using the *#197327640# method, (whereby you go into the service mode, turn off the PERSHO_256 and then INITIALLIZ).
I tried this method and the phone then seemed to work with my telus sim, but only for voice, not data. When I put in a Bell SIM from a friend, both voice and data worked fine - which tells me its not a hardware (radio) issue. I also tried using another friends Telus SIM and had the same results as mine - which tells me it's not a SIM error. Also, all the settings in the mobile network area appeared to be correctly set up.
So, my next step was to try and reflash the phone to the stock Bell ROM and then just buy an Unlock code. I downloaded the stock ROM (2 different ones actually) and used Odin 3.07 to reload the ROM. I've tried it several times now, with both Bell ROMs and each time it says it's been successful, but the phone remains in the same, partially unlocked state.
It seems as though by using the PERSHO_256 method I have permanently, PARTIALLY unlocked the phone. I can't seem to re-lock it by installing the stock Bell ROM, and since it's unlocked, I can't get the foreign SIM error to come up to enable me to put in my purchased unlock code.
If anyone has any insights, it would be GREATLY appreciated. Thanks!
-Luke
You should ask questions about a specific device in its own Q&A. (unless it doesn't have one). Cuz people there have the same phone and will know exactly what to do.
LIFE! IT'S WHAT YOU MAKE OUT OF IT!
Will do, thanks for the tip!
Hey guys - so my brother-in-law gave me an 'unlocked' i717 that was running the stock AT&T Android (he says he was using it with another carrier). I did some research and used CWM to put CM Android 4.2.2 on there. Thinking I'm all good, I ordered a SIM card from Ting and ported over my Verizon number to it. I go to use the SIM card and the phone prompts me for a SIM unlock code! In doing some more research, I found that I should have a Baseband Version, but that currently reads as 'unknown'. I DO have a IMEI number, though.
So what are my options? I've found a few threads about flashing a radio, would that clear up the SIM unlock problem or just give me a Baseband version? Again, according to my brother-in-law he has used this on other carriers than AT&T.
Thanks in advance!
A modem flash and adjustment of your APN settings may do the trick....
Those two items are required for a carrier change...g
Hi, i have been trying to find an answer to this after hours of searching i've come up short and confused.
I recently switched from tmobile to verizon, and i paid off my tmobile s9+ and had it sim unlocked. When i put my verizon sim in it, nothing really happens. either it tells me that it can't register on the network or to insert a tmobile sim card.
I have tried using reset and factory reset. I have also tried the method of holding the volume bixby and power and doing a factory reset, then putting the sim in, rebooting, etc. That doesn't work either.
I see several people trying to go from verizon to tmobile, but i haven't been able to find anyone going from tmobile to verizon, and what method i need to do to get this to work, if its possible at all. Any help would be so much appreciated!
gigatigga said:
Hi, i have been trying to find an answer to this after hours of searching i've come up short and confused.
I recently switched from tmobile to verizon, and i paid off my tmobile s9+ and had it sim unlocked. When i put my verizon sim in it, nothing really happens. either it tells me that it can't register on the network or to insert a tmobile sim card.
I have tried using reset and factory reset. I have also tried the method of holding the volume bixby and power and doing a factory reset, then putting the sim in, rebooting, etc. That doesn't work either.
I see several people trying to go from verizon to tmobile, but i haven't been able to find anyone going from tmobile to verizon, and what method i need to do to get this to work, if its possible at all. Any help would be so much appreciated!
Click to expand...
Click to collapse
Use Odin to flash U1 and then go back to U. Just leave the SIM in. Don't use HOME CSC.
CrazyApe18 said:
Use Odin to flash U1 and then go back to U. Just leave the SIM in. Don't use HOME CSC.
Click to expand...
Click to collapse
That still may not help, remember Verizon is still CDMA and the T Mobile branded phone does not have CDMA bands activated and they may not even be on the phone, I don't know. Granted band 13 should work fine, being LTE, but could the sim be looking for a CDMA radio and that is why it is not working?
uzupan said:
That still may not help, remember Verizon is still CDMA and the T Mobile branded phone does not have CDMA bands activated and they may not even be on the phone, I don't know. Granted band 13 should work fine, being LTE, but could the sim be looking for a CDMA radio and that is why it is not working?
Click to expand...
Click to collapse
The hardware is identical for all US Galaxy S9 phones. Any bands that may be missing will be resolved by flashing firmware. OP could also just stay with U1 if they want unlocked, and all bands would still be there.
CrazyApe18 said:
The hardware is identical for all US Galaxy S9 phones. Any bands that may be missing will be resolved by flashing firmware. OP could also just stay with U1 if they want unlocked, and all bands would still be there.
Click to expand...
Click to collapse
That is good to know, I sure hope it works for him.
Thank you for the replies, i will try this and post back!
Well sadly with the u1 firmware files, i get an auth error SW REV CHECK FAIL. =/
CrazyApe18 said:
The hardware is identical for all US Galaxy S9 phones. Any bands that may be missing will be resolved by flashing firmware. OP could also just stay with U1 if they want unlocked, and all bands would still be there.
Click to expand...
Click to collapse
As per Samsung chat support, I've asked if the dual sim version (international) will work with Verizon. I've also asked the rep if I can switch carriers with a locked phone. They said that essentially, all phones were manufactured with the CDMA and GSM band compatibility, it just needs to be unlocked and the US versions will work on any carrier in the US and the international version (dual sim) needs to be unlocked and it will work with any carrier in any country.
That said, it seems that you're just having an unlocking issue - which is good and bad. I hope you figure this out. Try using Odin 3.13, get the CORRECT firmware for U1 or U(VZW) to flash your phone
eyewin said:
As per Samsung chat support, I've asked if the dual sim version (international) will work with Verizon. I've also asked the rep if I can switch carriers with a locked phone. They said that essentially, all phones were manufactured with the CDMA and GSM band compatibility, it just needs to be unlocked and the US versions will work on any carrier in the US and the international version (dual sim) needs to be unlocked and it will work with any carrier in any country.
That said, it seems that you're just having an unlocking issue - which is good and bad. I hope you figure this out. Try using Odin 3.13, get the CORRECT firmware for U1 or U(VZW) to flash your phone
Click to expand...
Click to collapse
Only one small correction to what they told you: The 965F (international), will not have CDMA capabilities. That might not be a problem on some US carriers. But if you can't get VoLTE working on VZW with 965F, then you're dead in the water, since you don't have 1x CDMA calling to fall back on. It becomes a data-only device. I don't have experience with it, but I wouldn't be surprised if the VoLTE doesn't work on US carriers. For GDM/WCDMA carriers, you'd probably be just fine with 965F. Even if VoLTE doesn't work, you'd still be able to call.
Hope this helps.
eyewin said:
That said, it seems that you're just having an unlocking issue - which is good and bad. I hope you figure this out. Try using Odin 3.13, get the CORRECT firmware for U1 or U(VZW) to flash your phone
Click to expand...
Click to collapse
Thanks for your reply, any idea where to get these? I'm seeing all kinds of universal stuff and people saying carrier specific don't exist, etc etc. If you happen to know i'd be extremely grateful
gigatigga said:
Thanks for your reply, any idea where to get these? I'm seeing all kinds of universal stuff and people saying carrier specific don't exist, etc etc. If you happen to know i'd be extremely grateful
Click to expand...
Click to collapse
Step 1
Can you find out the exact model number?
For T-Mobile, it will be one of these :
SM-G965UZKATMB (Midnight Black)
SM-G965UZBATMB (Coral Blue)
SM-G965UZPATMB (Lilac Purple)
The U is the important part, as a previous poster explained that the F models do not have CDMA support (forget what that actually means, just know its necessary for verizon)
Step 2
Next, make sure that the carrier version is correct.
Example: SM-G965UZKATMB
BST Boost
VZW Verizon
ATT ATT
USC US Cellular
ACG C Spire
TMK MetroPCS
VMU Virgin Mobile
TFN Tracfone
XAS Sprint
TMB T-Mobile
XAA Unlocked US
SPR Sprint
CCT Xfinity Mobile
Essentially, you need the firmware that starts with SM-G965U and ends with VZW
Step 3
I'm not 100% sure on how to flash from carrier to carrier but there will be a list of directions. You may need to do some research there to see if it will void samsung warranty (aka 'trip knox') or anything like that, if that matters to you. I think only a modified version of Odin will be able to do this.
Download Odin v3.13.1
Extract the firmware file you just downloaded. You should get 5 files:
AP (System & Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_OXM (OXM CSC file, will wipe your phone)
HOME_CSC_OXM (OXM CSC file, will NOT wipe your phone)
Add each file to it's respective field in Odin v3.13.1. Use CSC_OXM if you want to do a clean flash and HOME_CSC OXM if you want to keep your apps and data.
Reboot your phone in Download / Odin mode with the following button combo: POWER + VOLUME DOWN + BIXBY
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a blue box will show up with the COM port number.
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS'. Once the flash is complete, your phone will reboot.
Click to expand...
Click to collapse
Step 4
To download firmwares, google "SAMMOBILE website: /firmwares/galaxy-s9-plus/SM-G965U"
Looks like the latest verizon firmware is here: SAMMOBILE website /firmwares/galaxy-s9-plus/SM-G965U/VZW/download/G965USQS2ARF4/223287
(I'm not yet allowed to post links)
Hey thanks a bunch, I’ll give this a shot when I get home tonight. It very well may be that the rom I got wasn’t the right one. Other threads I’ve read seemed to indicate that everything was universal now and by having the SIM card in the phone while flashing, it would download the carrier specific stuff automatically. That part at least doesn’t appear to be the case since the phone wouldn’t accept it. But I’ll download some of the carrier specifics and see what happens. Thanks again!
Did you get it to work after all?
Sorry that i forgot to update! I did get it working, but it required a bit more discussion and help on a reddit discussion someone started. I noticed that someone asked this exact question and i pointed him to this thread where he was able to get it working, then helped me with which roms he used, and i got it working as well! I've been using it daily for almost a month now. Thanks so much for everyones help, i hope that if anyone else is trying to do this, between the two threads it can help. Heres the link to the reddit thread https://old.reddit.com/r/verizon/comments/909iag/tmobile_s9_on_verizon/
gigatigga said:
Sorry that i forgot to update! I did get it working, but it required a bit more discussion and help on a reddit discussion someone started. I noticed that someone asked this exact question and i pointed him to this thread where he was able to get it working, then helped me with which roms he used, and i got it working as well! I've been using it daily for almost a month now. Thanks so much for everyones help, i hope that if anyone else is trying to do this, between the two threads it can help. Heres the link to the reddit thread https://old.reddit.com/r/verizon/comments/909iag/tmobile_s9_on_verizon/
Click to expand...
Click to collapse
Awesome gigatigga - thanks for getting back. I'm on the verge of trying this. I owe some money on my S9 plus on t-mobile but before i paid it off wanted to make sure all is good.
How are the speeds? Everything working ok? Thanks again! :good::good:
Edit: I was all set to do this and during the signup - I found out that my imei wouldn't work in Verizon's system so they used one from another phone. He advised that if I wanted to pay for insurance, if I make a claim it could be an issue because the imei numbers won't match up. Seemed like a big red flag to me. So I didn't go through with it. Wonder how others are handling this?
I just switched from the ATT firmware to ARF4 on T-Mobile, but it says there is no update available, while the newest T-Mobile update is ARF7. Does anyone know how to get updates OTA?
zman441 said:
I just switched from the ATT firmware to ARF4 on T-Mobile, but it says there is no update available, while the newest T-Mobile update is ARF7. Does anyone know how to get updates OTA?
Click to expand...
Click to collapse
Right here bro. You'll need to sign up with Sam Mobile first then download it. It's slow but it'll get there in about 4 hours or so
https://www.sammobile.com/firmwares/galaxy-s9-plus/SM-G965U/TMB/download/G965USQU2ARF7/225597/
glensta said:
Right here bro. You'll need to sign up with Sam Mobile first then download it. It's slow but it'll get there in about 4 hours or so
https://www.sammobile.com/firmwares/galaxy-s9-plus/SM-G965U/TMB/download/G965USQU2ARF7/225597/
Click to expand...
Click to collapse
use updato, much faster
Invalid SIM Card
elliwigy said:
use updato, much faster
Click to expand...
Click to collapse
Can someone help me?
I cannot network unlock a T-mobile Samsung Galaxy 9 plus which has never been active on any plan. When I insert my Verizon SIM card a system notification says "Invalid SIM card. Network Locked SIM card inserted".
I want to bring this phone to Verizon where I have an active plan. I don't have a plan with Tmobile and my friend gifted me this phone. I flashed it to Samsung stock firmware and bought an unlock code from DoctorSim. The code applied successfully however the phone doesn't unlock completely and continues to prompt for the unlock code when I insert the Verizon Sim card. When I called Tmobile they said only a phone active for 40 days on their network can be unlocked using the phone app and that my friend would have to call them to unlock the phone.
jon westerman said:
Can someone help me?
I cannot network unlock a T-mobile Samsung Galaxy 9 plus which has never been active on any plan. When I insert my Verizon SIM card a system notification says "Invalid SIM card. Network Locked SIM card inserted".
I want to bring this phone to Verizon where I have an active plan. I don't have a plan with Tmobile and my friend gifted me this phone. I flashed it to Samsung stock firmware and bought an unlock code from DoctorSim. The code applied successfully however the phone doesn't unlock completely and continues to prompt for the unlock code when I insert the Verizon Sim card. When I called Tmobile they said only a phone active for 40 days on their network can be unlocked using the phone app and that my friend would have to call them to unlock the phone.
Click to expand...
Click to collapse
i dont do network unlocks.. you need to pay ur phone off and use the tmobile unlock apk
Sent from my SM-N960U using Tapatalk