Hi, i have been trying to find an answer to this after hours of searching i've come up short and confused.
I recently switched from tmobile to verizon, and i paid off my tmobile s9+ and had it sim unlocked. When i put my verizon sim in it, nothing really happens. either it tells me that it can't register on the network or to insert a tmobile sim card.
I have tried using reset and factory reset. I have also tried the method of holding the volume bixby and power and doing a factory reset, then putting the sim in, rebooting, etc. That doesn't work either.
I see several people trying to go from verizon to tmobile, but i haven't been able to find anyone going from tmobile to verizon, and what method i need to do to get this to work, if its possible at all. Any help would be so much appreciated!
gigatigga said:
Hi, i have been trying to find an answer to this after hours of searching i've come up short and confused.
I recently switched from tmobile to verizon, and i paid off my tmobile s9+ and had it sim unlocked. When i put my verizon sim in it, nothing really happens. either it tells me that it can't register on the network or to insert a tmobile sim card.
I have tried using reset and factory reset. I have also tried the method of holding the volume bixby and power and doing a factory reset, then putting the sim in, rebooting, etc. That doesn't work either.
I see several people trying to go from verizon to tmobile, but i haven't been able to find anyone going from tmobile to verizon, and what method i need to do to get this to work, if its possible at all. Any help would be so much appreciated!
Click to expand...
Click to collapse
Use Odin to flash U1 and then go back to U. Just leave the SIM in. Don't use HOME CSC.
CrazyApe18 said:
Use Odin to flash U1 and then go back to U. Just leave the SIM in. Don't use HOME CSC.
Click to expand...
Click to collapse
That still may not help, remember Verizon is still CDMA and the T Mobile branded phone does not have CDMA bands activated and they may not even be on the phone, I don't know. Granted band 13 should work fine, being LTE, but could the sim be looking for a CDMA radio and that is why it is not working?
uzupan said:
That still may not help, remember Verizon is still CDMA and the T Mobile branded phone does not have CDMA bands activated and they may not even be on the phone, I don't know. Granted band 13 should work fine, being LTE, but could the sim be looking for a CDMA radio and that is why it is not working?
Click to expand...
Click to collapse
The hardware is identical for all US Galaxy S9 phones. Any bands that may be missing will be resolved by flashing firmware. OP could also just stay with U1 if they want unlocked, and all bands would still be there.
CrazyApe18 said:
The hardware is identical for all US Galaxy S9 phones. Any bands that may be missing will be resolved by flashing firmware. OP could also just stay with U1 if they want unlocked, and all bands would still be there.
Click to expand...
Click to collapse
That is good to know, I sure hope it works for him.
Thank you for the replies, i will try this and post back!
Well sadly with the u1 firmware files, i get an auth error SW REV CHECK FAIL. =/
CrazyApe18 said:
The hardware is identical for all US Galaxy S9 phones. Any bands that may be missing will be resolved by flashing firmware. OP could also just stay with U1 if they want unlocked, and all bands would still be there.
Click to expand...
Click to collapse
As per Samsung chat support, I've asked if the dual sim version (international) will work with Verizon. I've also asked the rep if I can switch carriers with a locked phone. They said that essentially, all phones were manufactured with the CDMA and GSM band compatibility, it just needs to be unlocked and the US versions will work on any carrier in the US and the international version (dual sim) needs to be unlocked and it will work with any carrier in any country.
That said, it seems that you're just having an unlocking issue - which is good and bad. I hope you figure this out. Try using Odin 3.13, get the CORRECT firmware for U1 or U(VZW) to flash your phone
eyewin said:
As per Samsung chat support, I've asked if the dual sim version (international) will work with Verizon. I've also asked the rep if I can switch carriers with a locked phone. They said that essentially, all phones were manufactured with the CDMA and GSM band compatibility, it just needs to be unlocked and the US versions will work on any carrier in the US and the international version (dual sim) needs to be unlocked and it will work with any carrier in any country.
That said, it seems that you're just having an unlocking issue - which is good and bad. I hope you figure this out. Try using Odin 3.13, get the CORRECT firmware for U1 or U(VZW) to flash your phone
Click to expand...
Click to collapse
Only one small correction to what they told you: The 965F (international), will not have CDMA capabilities. That might not be a problem on some US carriers. But if you can't get VoLTE working on VZW with 965F, then you're dead in the water, since you don't have 1x CDMA calling to fall back on. It becomes a data-only device. I don't have experience with it, but I wouldn't be surprised if the VoLTE doesn't work on US carriers. For GDM/WCDMA carriers, you'd probably be just fine with 965F. Even if VoLTE doesn't work, you'd still be able to call.
Hope this helps.
eyewin said:
That said, it seems that you're just having an unlocking issue - which is good and bad. I hope you figure this out. Try using Odin 3.13, get the CORRECT firmware for U1 or U(VZW) to flash your phone
Click to expand...
Click to collapse
Thanks for your reply, any idea where to get these? I'm seeing all kinds of universal stuff and people saying carrier specific don't exist, etc etc. If you happen to know i'd be extremely grateful
gigatigga said:
Thanks for your reply, any idea where to get these? I'm seeing all kinds of universal stuff and people saying carrier specific don't exist, etc etc. If you happen to know i'd be extremely grateful
Click to expand...
Click to collapse
Step 1
Can you find out the exact model number?
For T-Mobile, it will be one of these :
SM-G965UZKATMB (Midnight Black)
SM-G965UZBATMB (Coral Blue)
SM-G965UZPATMB (Lilac Purple)
The U is the important part, as a previous poster explained that the F models do not have CDMA support (forget what that actually means, just know its necessary for verizon)
Step 2
Next, make sure that the carrier version is correct.
Example: SM-G965UZKATMB
BST Boost
VZW Verizon
ATT ATT
USC US Cellular
ACG C Spire
TMK MetroPCS
VMU Virgin Mobile
TFN Tracfone
XAS Sprint
TMB T-Mobile
XAA Unlocked US
SPR Sprint
CCT Xfinity Mobile
Essentially, you need the firmware that starts with SM-G965U and ends with VZW
Step 3
I'm not 100% sure on how to flash from carrier to carrier but there will be a list of directions. You may need to do some research there to see if it will void samsung warranty (aka 'trip knox') or anything like that, if that matters to you. I think only a modified version of Odin will be able to do this.
Download Odin v3.13.1
Extract the firmware file you just downloaded. You should get 5 files:
AP (System & Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_OXM (OXM CSC file, will wipe your phone)
HOME_CSC_OXM (OXM CSC file, will NOT wipe your phone)
Add each file to it's respective field in Odin v3.13.1. Use CSC_OXM if you want to do a clean flash and HOME_CSC OXM if you want to keep your apps and data.
Reboot your phone in Download / Odin mode with the following button combo: POWER + VOLUME DOWN + BIXBY
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a blue box will show up with the COM port number.
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS'. Once the flash is complete, your phone will reboot.
Click to expand...
Click to collapse
Step 4
To download firmwares, google "SAMMOBILE website: /firmwares/galaxy-s9-plus/SM-G965U"
Looks like the latest verizon firmware is here: SAMMOBILE website /firmwares/galaxy-s9-plus/SM-G965U/VZW/download/G965USQS2ARF4/223287
(I'm not yet allowed to post links)
Hey thanks a bunch, I’ll give this a shot when I get home tonight. It very well may be that the rom I got wasn’t the right one. Other threads I’ve read seemed to indicate that everything was universal now and by having the SIM card in the phone while flashing, it would download the carrier specific stuff automatically. That part at least doesn’t appear to be the case since the phone wouldn’t accept it. But I’ll download some of the carrier specifics and see what happens. Thanks again!
Did you get it to work after all?
Sorry that i forgot to update! I did get it working, but it required a bit more discussion and help on a reddit discussion someone started. I noticed that someone asked this exact question and i pointed him to this thread where he was able to get it working, then helped me with which roms he used, and i got it working as well! I've been using it daily for almost a month now. Thanks so much for everyones help, i hope that if anyone else is trying to do this, between the two threads it can help. Heres the link to the reddit thread https://old.reddit.com/r/verizon/comments/909iag/tmobile_s9_on_verizon/
gigatigga said:
Sorry that i forgot to update! I did get it working, but it required a bit more discussion and help on a reddit discussion someone started. I noticed that someone asked this exact question and i pointed him to this thread where he was able to get it working, then helped me with which roms he used, and i got it working as well! I've been using it daily for almost a month now. Thanks so much for everyones help, i hope that if anyone else is trying to do this, between the two threads it can help. Heres the link to the reddit thread https://old.reddit.com/r/verizon/comments/909iag/tmobile_s9_on_verizon/
Click to expand...
Click to collapse
Awesome gigatigga - thanks for getting back. I'm on the verge of trying this. I owe some money on my S9 plus on t-mobile but before i paid it off wanted to make sure all is good.
How are the speeds? Everything working ok? Thanks again! :good::good:
Edit: I was all set to do this and during the signup - I found out that my imei wouldn't work in Verizon's system so they used one from another phone. He advised that if I wanted to pay for insurance, if I make a claim it could be an issue because the imei numbers won't match up. Seemed like a big red flag to me. So I didn't go through with it. Wonder how others are handling this?
I just switched from the ATT firmware to ARF4 on T-Mobile, but it says there is no update available, while the newest T-Mobile update is ARF7. Does anyone know how to get updates OTA?
zman441 said:
I just switched from the ATT firmware to ARF4 on T-Mobile, but it says there is no update available, while the newest T-Mobile update is ARF7. Does anyone know how to get updates OTA?
Click to expand...
Click to collapse
Right here bro. You'll need to sign up with Sam Mobile first then download it. It's slow but it'll get there in about 4 hours or so
https://www.sammobile.com/firmwares/galaxy-s9-plus/SM-G965U/TMB/download/G965USQU2ARF7/225597/
glensta said:
Right here bro. You'll need to sign up with Sam Mobile first then download it. It's slow but it'll get there in about 4 hours or so
https://www.sammobile.com/firmwares/galaxy-s9-plus/SM-G965U/TMB/download/G965USQU2ARF7/225597/
Click to expand...
Click to collapse
use updato, much faster
Invalid SIM Card
elliwigy said:
use updato, much faster
Click to expand...
Click to collapse
Can someone help me?
I cannot network unlock a T-mobile Samsung Galaxy 9 plus which has never been active on any plan. When I insert my Verizon SIM card a system notification says "Invalid SIM card. Network Locked SIM card inserted".
I want to bring this phone to Verizon where I have an active plan. I don't have a plan with Tmobile and my friend gifted me this phone. I flashed it to Samsung stock firmware and bought an unlock code from DoctorSim. The code applied successfully however the phone doesn't unlock completely and continues to prompt for the unlock code when I insert the Verizon Sim card. When I called Tmobile they said only a phone active for 40 days on their network can be unlocked using the phone app and that my friend would have to call them to unlock the phone.
jon westerman said:
Can someone help me?
I cannot network unlock a T-mobile Samsung Galaxy 9 plus which has never been active on any plan. When I insert my Verizon SIM card a system notification says "Invalid SIM card. Network Locked SIM card inserted".
I want to bring this phone to Verizon where I have an active plan. I don't have a plan with Tmobile and my friend gifted me this phone. I flashed it to Samsung stock firmware and bought an unlock code from DoctorSim. The code applied successfully however the phone doesn't unlock completely and continues to prompt for the unlock code when I insert the Verizon Sim card. When I called Tmobile they said only a phone active for 40 days on their network can be unlocked using the phone app and that my friend would have to call them to unlock the phone.
Click to expand...
Click to collapse
i dont do network unlocks.. you need to pay ur phone off and use the tmobile unlock apk
Sent from my SM-N960U using Tapatalk
Related
Hi there,
I rooted my phone. I've installed Cyanogenmod 7 and enjoyed it. However, it is SIM locked. I purchased an unlock code... but now I can't enter it.
This person had the same problem:
http://forum.xda-developers.com/showthread.php?t=1313393
Cyanogenmod does not prompt to unlock even with a foreign SIM card.
The solution was to revert to a stock firmware. Which is great... except for the fact that my phone's model number is:
i5500m.
It's the dreaded Canadian version. I can't find firmware for it anywhere. I've tried Check FUS:
Product Code: GT-I5500YKMVMC
No firmware info retrieved for given data.
Generally it seems like I only have two solutions... and one failure.
The first solution is to find a stock firmware for this phone. Or receive a backup from someone who has the stock firmware with Clockworkmod.
The second solution is to enter the unlock code without the prompt. Is there a way, an app, or a hack to do something like this?
My failure is to accept that there's no reverting. But I don't really want to do that.
Oh, and thank you for welcoming me into your forums. XDA Developers is a really amazing site. I've thanked it plenty of times for saving my ass.
Thanks for your time,
Sacrosaint.
Your answer may be found here:
http://forum.xda-developers.com/showthread.php?t=1149110
Look closely at the latest changelog and notice that point 12 states -
"Network: SIM lock messages will no longer be ignored. This may help people who have problems using SIM cards that require a PIN unlock."
Good luck
________________________________________________
Please press "Thanks" if you found me helpful.
i5500
CM7 1.9 hf3
I5500BVJJP9
Thank you so much! I missed that update by only two days. I'm sure this will help many people.
I'll edit this post with my results once completed.
Thanks again!
Sacrosaint.
---------------------------------
Results:
So I updated the ROM. I did not do a data-wipe. I inserted a foreign SIM card. It says it's connected but I'm not getting any service... I don't believe it's unlocked, as I haven't entered a code yet.
Perhaps I should do a data-wipe and retry. I'll repost afterward.
---------------------------------
Potential Final Update:
Odd! I inserted a Rogers SIM card into my phone running CyanogenMod and although no unlock code appeared... it worked. Also known as: my phone is unlocked.
Some interesting thoughts concerning this:
My phone model is i5500m. It comes locked to Bell or Virgin Mobile in Canada.
Upon trying the bml5 unlock method, my code came up as "01234567." Others experiencing this problem concluded that the phone was hard locked.
However, it would appear that flashing this ROM effectively removed the SIM lock. That means that originally, the SIM lock was a part of the firmware. That is slightly scary. I wish I would have come to this conclusion earlier, however, as I paid a premium of $40 dollars to unlock it (at least I supported a local business.)
So: for i5500m or Canadian Samsung Galaxy 5 users to unlock their phones, they must simply root and flash a custom ROM. Originally mine was from Bell, and it has worked with a Rogers SIM card. I'll possibly update this tomorrow when I try the phone with a Koodo SIM.
Hope this helps someone out there.
Sacrosaint
Sacrosaint,
I have an unlocked GT-I5503YKAINU running baseband I5500LUYJP2 and ROM CyanogenMod-7.2.0-RC0-galaxy5-v1.9. I inserted a Virgin Mobile Canada SIM card and do not get Service. With a Rogers SIM card, I do get Service. I spoke to people at Virgin and they said it's because my phone doesn't support HSPA+. The reason it works with Rogers is because it supports GSM.
I'm wonder if there's a way to install the baseband firmware from GT-I5500YKMVMC and still use CyanogenMod-7.2.0-RC0-galaxy5-v1.9?
asawrup said:
Sacrosaint,
I have an unlocked GT-I5503YKAINU running baseband I5500LUYJP2 and ROM CyanogenMod-7.2.0-RC0-galaxy5-v1.9. I inserted a Virgin Mobile Canada SIM card and do not get Service. With a Rogers SIM card, I do get Service. I spoke to people at Virgin and they said it's because my phone doesn't support HSPA+. The reason it works with Rogers is because it supports GSM.
I'm wonder if there's a way to install the baseband firmware from GT-I5500YKMVMC and still use CyanogenMod-7.2.0-RC0-galaxy5-v1.9?
Click to expand...
Click to collapse
What the representative said was true.
Virgin is both HSPA+ and CDMA. The Galaxy 5 IS a GSM phone. Its radio will not work with other frequencies.
You will want to go with Bell, Rogers, Telus, Fido, or Koodo, the GSM suppliers, my friend.
Hello, I'm wondering if there is a guide or any info at all about rooting the KDDI's SGS3 LTE. I saw a bunch of thread for the NTT DoCoMo version but none about the KDDI version. No idea if they use the same hardware or not.
Root success by flashing CWM recovery and sgs3_rooting_supersu_v3.zip. Those tools are specified for Galaxy S3 NTT Docomo (SC-06D) but they also worked for Galaxy S3 Progre from AU KDDI (SCL21).
Just wondering how to unlock this SCL21, if anybody knows, please share.
brong said:
Root success by flashing CWM recovery and sgs3_rooting_supersu_v3.zip. Those tools are specified for Galaxy S3 NTT Docomo (SC-06D) but they also worked for Galaxy S3 Progre from AU KDDI (SCL21).
Just wondering how to unlock this SCL21, if anybody knows, please share.
Click to expand...
Click to collapse
I am also trying to find out a way to root my SCL21 but am having no luck. I have tried many of the "Universal 4.0.4 rooting methods" but have had no luck. Brong, would you mind sharing exactly what you did? The threads here http://forum.xda-developers.com/showthread.php?t=1999024 and here http://forum.xda-developers.com/showthread.php?t=1996940&page=2 warn about using the docomo method because it bricks the phone. Nothing seems to work with our model. Any help would be appriciated. Thanks.
madj1 said:
I am also trying to find out a way to root my SCL21 but am having no luck. I have tried many of the "Universal 4.0.4 rooting methods" but have had no luck. Brong, would you mind sharing exactly what you did? The threads here http://forum.xda-developers.com/showthread.php?t=1999024 and here http://forum.xda-developers.com/showthread.php?t=1996940&page=2 warn about using the docomo method because it bricks the phone. Nothing seems to work with our model. Any help would be appriciated. Thanks.
Click to expand...
Click to collapse
Hi,
First step is flash the CWM recovery via Odin. You can download CWM recovery from here:
https://docs.google.com/folder/d/0B...ZhbUE/edit?docId=0B98X7HyfoaGaNzNvR052dUp0Wmc
Choose this file: SC06D-JB-KBC-CWM-V6.0.1.2_r10-recovery-odin.tar.md5
Flash that file in Odin, choose the PDA in Odin.
I assume you already know how to flash via Odin, if you dont know just ask me again or try to browse other thread.
Step two is run the CWM recovery. Also, I assume you already know to get into recovery mode. Make backup first in recovery mode, you need to insert external SD card and save the backup in the card.
Step three, download this file sgs3_rooting_supersu_v3.zip from here:
https://docs.google.com/folder/d/0B...ZhbUE/edit?docId=0B98X7HyfoaGaR21wdXZweDdYSXM and save it to the external SD card that you used before.
Step four, run the recovery mode again and choose install from SD card, then choose external sd card and choose the file you donwloaded (sgs3_rooting_supersu_v3.zip). After completing all, reboot your phone and you will see the Super User app. Make sure you download root checker in Play store so you can check whether the phone are rooted or not.
Note: If you run the recovery, the screen will reverse. Dont worry, it works eventhough the screen reverses.
Thats all. I am looking the way to unlock this phone, *#197328640# doesnt work. If you have a clue, please let me know.
---------- Post added at 09:42 AM ---------- Previous post was at 09:27 AM ----------
madj1 said:
I am also trying to find out a way to root my SCL21 but am having no luck. I have tried many of the "Universal 4.0.4 rooting methods" but have had no luck. Brong, would you mind sharing exactly what you did? The threads here http://forum.xda-developers.com/showthread.php?t=1999024 and here http://forum.xda-developers.com/showthread.php?t=1996940&page=2 warn about using the docomo method because it bricks the phone. Nothing seems to work with our model. Any help would be appriciated. Thanks.
Click to expand...
Click to collapse
I see a Vietnam website with video on youtube. It shows that this phone has been unlocked.
http://choimobile.vn/threads/unlock-samsung-s3-scl21-au-kddi-nhat-ban.2699/
Any idea how to SIM unlock this phone?, really appreciate any help.
Thanks.
Updated:
I found a new thing regarding this phone. This phone doesn't support non LTE sim card, even you have micro sim (3G) card from AU KDDI. I am trying to find other LTE sim card from other carrier in order to check whether this phone works on that sim or not.
May be somebody can explain why this phone doesn't support non LTE sim. In case of Galaxy s3 LTE from NTT Docomo, it works when I used 3G sim (FOMA). I cut the 3G sim to fit the micro slot.
unlock for this phone
well, my purpose is/was to unlock this phone so I followed the samsung galaxy s3/note unlock method from here: http://forum.xda-developers.com/showthread.php?t=2014982
(I have/had this S3 Progre SCL21, the same phone in this thread)
I can access all the menu and procedure from that thread below, despite this phone being stock Android 4.04!
----------------
"Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone..."
---------------
I put 3G/2G sim card and the phone shows no service. I even put CDMA network sim, no luck. I don't know if this phone is unlocked. I'm wondering if this phone works only with LTE/4g sim. Right now, there's no 4G/LTE in my region
I assume the phone must support all other bands, if properly unlocked.
Now, I'm wandering through the threads and googling.
So far, I'm looking for Jelly Bean 4.1.1 for this phone, which doesn't seem to be available anywhere, even on samfirmware, only stock firmware
Root/flash CWM recovery and try some other unlock method from out there, (after making a backup Stock ROM and sensitive IMEI/NV data of course)
Please keep everyone updated and keep the spirit alive
aabhash said:
well, my purpose is/was to unlock this phone so I followed the samsung galaxy s3/note unlock method from here: http://forum.xda-developers.com/showthread.php?t=2014982
(I have/had this S3 Progre SCL21, the same phone in this thread)
I can access all the menu and procedure from that thread below, despite this phone being stock Android 4.04!
----------------
"Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone..."
---------------
I put 3G/2G sim card and the phone shows no service. I even put CDMA network sim, no luck. I don't know if this phone is unlocked. I'm wondering if this phone works only with LTE/4g sim. Right now, there's no 4G/LTE in my region
I assume the phone must support all other bands, if properly unlocked.
Now, I'm wandering through the threads and googling.
So far, I'm looking for Jelly Bean 4.1.1 for this phone, which doesn't seem to be available anywhere, even on samfirmware, only stock firmware
Root/flash CWM recovery and try some other unlock method from out there, (after making a backup Stock ROM and sensitive IMEI/NV data of course)
Please keep everyone updated and keep the spirit alive
Click to expand...
Click to collapse
So do I, It's hard to unlock
Thanh_GSM said:
So do I, It's hard to unlock
Click to expand...
Click to collapse
As its not a I9300 nothing from this forum is of use .
Suggest a Google search .
jje
Actually this phone, SCL21 can be used with LTE sim card only. I already tried to use non LTE sim card from KDDI AU with no luck.
What I am thinking is actually this phone maybe unlock-able by using the procedure as you mentioned (NW Lock NV Data INITIALLIZ). Since the phone can only be used with LTE sim card, we need to try LTE sim card from other carrier in order to test.
The problem is I dont have other carrier LTE sim card right now, if you have you can try it.
Update: Also I am wondering how to make this phone works with not only LTE/4G but also with 3G/CDMA. I changed the band to automatic, but there is no luck. I think this phone is locked to be used only with LTE/4G sim card. So, if somebody knows how to deal with this matter (make the phone not only accepts LTE/4G sim card, but also 3G/CDMA sim card) please share with us here.
aabhash said:
well, my purpose is/was to unlock this phone so I followed the samsung galaxy s3/note unlock method from here: http://forum.xda-developers.com/showthread.php?t=2014982
(I have/had this S3 Progre SCL21, the same phone in this thread)
I can access all the menu and procedure from that thread below, despite this phone being stock Android 4.04!
----------------
"Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone..."
---------------
I put 3G/2G sim card and the phone shows no service. I even put CDMA network sim, no luck. I don't know if this phone is unlocked. I'm wondering if this phone works only with LTE/4g sim. Right now, there's no 4G/LTE in my region
I assume the phone must support all other bands, if properly unlocked.
Now, I'm wandering through the threads and googling.
So far, I'm looking for Jelly Bean 4.1.1 for this phone, which doesn't seem to be available anywhere, even on samfirmware, only stock firmware
Root/flash CWM recovery and try some other unlock method from out there, (after making a backup Stock ROM and sensitive IMEI/NV data of course)
Please keep everyone updated and keep the spirit alive
Click to expand...
Click to collapse
Hi everyone ^_^
I just got the SCL21 about two weeks ago. I think it's really strange that even on the Japanese forums, there is very little info on rooting this model. From everything I've found, some Japanese sites also both say it's OKAY to root using the Docomo SC-06D recovery and Superuser zip while others say that it's NOT safe to use that same method and it will result in a bricked phone. Really odd, conflicting messages I think.
What is even more strange is the apparent issue with the screen "reversing"? One of the Japanese sites literally said the screen becomes "upside down" after flashing the SC-06D recovery.
Brong, since you got the root to work successfully , could you please elaborate on the "reversing" of the screen? Is the image upside down and only during the recovery mode? Also, do you know if the root caused you to lose the "osaifu Keitai" touch feature?
Thanks a lot to Brong and everyone else helping out with this model phone!!
Sent from my SCL21 using xda app-developers app
Status of SIM access
Hi,
I tested both a 3G micro SIM and a 4G LTE nano SIM from Softbank in this phone and neither card is recognized. The phone acts as though no SIM is inserted at all. (Complete with the "no smoking" symbol (circle with diagonal line through it) instead of a signal meter. I have confirmed that this phone is indeed sold already SIM unlocked from the factory as the MSL is 000000 just like the Verizon Galaxy S III which is also sold without a SIM lock. Additionally, KDDI lists the SCL21 and all other LTE phones they are selling since the debut last winter as being SIM unlocked devices.
According to some Japanese forums, they are suspecting that this phone has some type of hardware lock (hard locked?)... I contacted the only known person who was successful at using a 3rd party SIM on the Vietnamese Viettel GSM network as in a YouTube video. He wouldn't give me any details except that he must have the phone physically in his shop to modify it and it can't be done remotely. This individual also has screenshots showing the stock ROM version running in Vietnamese which makes me believe that he flashed something to the stock ROM to gain SIM detection of 3rd party cards.. Anyone have any ideas about such a hardware locking mechanism?
brong said:
Actually this phone, SCL21 can be used with LTE sim card only. I already tried to use non LTE sim card from KDDI AU with no luck.
What I am thinking is actually this phone maybe unlock-able by using the procedure as you mentioned (NW Lock NV Data INITIALLIZ). Since the phone can only be used with LTE sim card, we need to try LTE sim card from other carrier in order to test.
The problem is I dont have other carrier LTE sim card right now, if you have you can try it.
Update: Also I am wondering how to make this phone works with not only LTE/4G but also with 3G/CDMA. I changed the band to automatic, but there is no luck. I think this phone is locked to be used only with LTE/4G sim card. So, if somebody knows how to deal with this matter (make the phone not only accepts LTE/4G sim card, but also 3G/CDMA sim card) please share with us here.
Click to expand...
Click to collapse
decoding samsung galaxy s3 scl21
hello guys!!!! im a new member here ... i registered on this site for one reason and that is to help those people who have samsung galaxy s3 scl21 ... because i also got 1. I`ve been searching for months on how to unlock this phone so i could use it in my country (Philippines). I was almost loosing my hope because i was really eager to use this phone because of its features, a nice looking phone and its very expensive here in my country.
Few days ago i was browsing the net, i came across with this code *#197328640# that opened the window for me on how i could use the phone with any kind of sim card wether its LTE or 3G ..Im telling you guys the answers are all in that code
pinoyakooo said:
hello guys!!!! im a new member here ... i registered on this site for one reason and that is to help those people who have samsung galaxy s3 scl21 ... because i also got 1. I`ve been searching for months on how to unlock this phone so i could use it in my country (Philippines). I was almost loosing my hope because i was really eager to use this phone because of its features, a nice looking phone and its very expensive here in my country.
Few days ago i was browsing the net, i came across with this code *#197328640# that opened the window for me on how i could use the phone with any kind of sim card wether its LTE or 3G ..Im telling you guys the answers are all in that code
Click to expand...
Click to collapse
can you share step by step?
my phone need to unlock, please help
He's referring to the service mode. In that case, here are the steps to perform an unlock using the service mode (tested to work ONLY on the docomo models SC-06D and SC-03E; NO GUARANTEE IT WILL WORK ON THE SCL21):
1. Enter service mode by dialing the code in the dialer.
2. Press "UMTS".
3. Press "Debug Screen".
4. Press "Phone Control".
5. Press "Network Lock".
6. Press "Perso SHA256 Off".
7. Menu->Back (if the menu button turns up nothing, then just push "back") then wait 30 seconds.
8. Press "NW Lock NV Data Initallliz" then wait around one minute.
9. Reboot the phone and it SHOULD be unlocked. Works great on the SC-06D and SC-03E, no guarantees with the SCL21. And with the SC-03E newer basebands either hid it away or blocked it out so an older one needs to be flashed in before it will show up for unlocking.
Anyone looking to get one should only do so when they've got a trip to Vietnam in their future (to go get it done in a shop there; they still seem to be the only country with shops doing it) or be using au in Japan.
s3 scl21
that`s the first instruction i found when i was browsing the net and tried it but unfortunately it didnt work...... there are still settings in the service menu and all you have to do is click everything that has something to do with the wcdma to gsm..gsm to wcdma or g to wcdma something like that. There`s also a setting that tells somethin like resetting cant remember the exact word and you have to wait for 90 or 60 secs.and restart the phone .and then go back to changing gsm to wcdma .,there`s a setting also that you have to change the frequency .cant remember the step by step guide but because of my eagerness to use the phone i clicked everthing in the service menu and searched every command listed in there.(dont worry it will not brick your phone).After doing all that... this is what happened .. i thought i failed again because the no smoking sign was still there ...so what i did was i clicked the settings and i was so surprised that the menu for mobile network comes out meaning to say that i was able to unlock the settings on the network ..im telling you guys this is what vietnamese unlockers have been doing to unlock this phone that is why they need the phone physically....thats all thanks
And it never prompted for a SIM unlock PIN again? Somebody really needs to go through this carefully and document it; an SCL21 is only 24-25k yen in Japan; I've heard of people paying more to fix broken screens on their international/American S3s.
scl21
as far as i know this particular phone model (s3 scl21) from AU KDDI is not sim locked . The first time i inserted the 3g simcard, it didnt ask for a pin code or anything ...what i could see was the no smoking sign and the simcard icon is there in the apps menu.
it's diffcult to unlock... i can't use in my country... please help
pinoyakooo said:
as far as i know this particular phone model (s3 scl21) from AU KDDI is not sim locked . The first time i inserted the 3g simcard, it didnt ask for a pin code or anything ...what i could see was the no smoking sign and the simcard icon is there in the apps menu.
Click to expand...
Click to collapse
Hi im from philippine also. Please help me on how to unlock samsung Galaxy s3 progre scl21. Thanks in ADVANCE.
Please help
i need stock rom for SCL21 ...
Please help me link
help
pinoyakooo said:
that`s the first instruction i found when i was browsing the net and tried it but unfortunately it didnt work...... there are still settings in the service menu and all you have to do is click everything that has something to do with the wcdma to gsm..gsm to wcdma or g to wcdma something like that. There`s also a setting that tells somethin like resetting cant remember the exact word and you have to wait for 90 or 60 secs.and restart the phone .and then go back to changing gsm to wcdma .,there`s a setting also that you have to change the frequency .cant remember the step by step guide but because of my eagerness to use the phone i clicked everthing in the service menu and searched every command listed in there.(dont worry it will not brick your phone).After doing all that... this is what happened .. i thought i failed again because the no smoking sign was still there ...so what i did was i clicked the settings and i was so surprised that the menu for mobile network comes out meaning to say that i was able to unlock the settings on the network ..im telling you guys this is what vietnamese unlockers have been doing to unlock this phone that is why they need the phone physically....thats all thanks
Click to expand...
Click to collapse
can you list out the step you taken ? i have 2 phones.
Hi Guys!
Does any of you know how to sim unlock the specified phone? (GT-S7275R)
Do i need to root the device? Which is the best rooting program/method?
Or i just need a code to sim unlock the phone?
If someone can help me i would be very happy
Thanks!
Molnardani84 said:
Hi Guys!
Does any of you know how to sim unlock the specified phone? (GT-S7275R)
Do i need to root the device? Which is the best rooting program/method?
Or i just need a code to sim unlock the phone?
If someone can help me i would be very happy
Thanks!
Click to expand...
Click to collapse
Sim unlock usually don't matter which phone its in.
The SIM only is locked.
Try using the wrong password untill it requests for PUK code, then get your PUK code handy.
Usually sim providers can give you your PUK code.
UNLESS YOU STOLE IT
Then you're a nigga**** !
XD
JK
Let me know if it helps.
Tre91 said:
Sim unlock usually don't matter which phone its in.
The SIM only is locked.
Try using the wrong password untill it requests for PUK code, then get your PUK code handy.
Usually sim providers can give you your PUK code.
UNLESS YOU STOLE IT
Then you're a nigga**** !
XD
JK
Let me know if it helps.
Click to expand...
Click to collapse
I want to use my phone with a vodafone SIM, but the phone is locked to T-Mobile.
Of course i know the PUK code I did not stole the phone or the SIM card
With this method I can use the phone with my Vodafone SIM?
The phone is rooted by the way.
When I enter my PIN code for the SIM, the phone asks for the network unlock code. That is my problem. And I can't use it with my Vodafone SIM card
Any solution for this?
Molnardani84 said:
I want to use my phone with a vodafone SIM, but the phone is locked to T-Mobile.
Of course i know the PUK code I did not stole the phone or the SIM card
With this method I can use the phone with my Vodafone SIM?
The phone is rooted by the way.
When I enter my PIN code for the SIM, the phone asks for the network unlock code. That is my problem. And I can't use it with my Vodafone SIM card
Any solution for this?
Click to expand...
Click to collapse
Maybe ?
I can only think of re-formatting the phones firmware.
Know how to use odin and flash a new firmware ?
Tre91 said:
Maybe ?
I can only think of re-formatting the phones firmware.
Know how to use odin and flash a new firmware ?
Click to expand...
Click to collapse
I have odin, but if you can send me instructions how to do what you just wrote that would be very nice of you
Do i have to download n original firmware? And flash via odin? Or how? I am very curious abou it
Thanks
Molnardani84 said:
I have odin, but if you can send me instructions how to do what you just wrote that would be very nice of you
Do i have to download n original firmware? And flash via odin? Or how? I am very curious abou it
Thanks
Click to expand...
Click to collapse
No worries mate.
So first to download is the original firmware.
Go here -> http://www.samsungis.com/Firmwares/GT-S7275R.html
Choose based on country+mobile.
Hover the mouse over the words and it will show the country name if you're unsure.
So for example im in Malaysia and the latest firmware is XME, S7275RXXUANA3.
Once downloaded, the file is a single file. Extact it and you'll get an md5 file.
Use whatever odin version u have. I used odin 3.07
And select 'PDA' only. Then go to the downloaded file.
Proceed with flashing. Click start and wait for the phone to be installed.
Once install, phone should be brand new.
If phone stuck at boot screen, enter recovery and wipe cache and partition.
Let me know how it goes. !
Tre91 said:
No worries mate.
So first to download is the original firmware.
Go here -> http://www.samsungis.com/Firmwares/GT-S7275R.html
Choose based on country+mobile.
Hover the mouse over the words and it will show the country name if you're unsure.
So for example im in Malaysia and the latest firmware is XME, S7275RXXUANA3.
Once downloaded, the file is a single file. Extact it and you'll get an md5 file.
Use whatever odin version u have. I used odin 3.07
And select 'PDA' only. Then go to the downloaded file.
Proceed with flashing. Click start and wait for the phone to be installed.
Once install, phone should be brand new.
If phone stuck at boot screen, enter recovery and wipe cache and partition.
Let me know how it goes. !
Click to expand...
Click to collapse
And if I do this, my phone will be SIM unlocked? How the recovery comes tom my phone? i only just rooted my phone, but on other orum I read that there is no CWM for the phone.
Molnardani84 said:
And if I do this, my phone will be SIM unlocked? How the recovery comes tom my phone? i only just rooted my phone, but on other orum I read that there is no CWM for the phone.
Click to expand...
Click to collapse
I cannot confirm if the phone will be unlocked. But its worth a try.
But many websites charge you to get it unlocked and im not sure if there's a cheaper method.
But i can confirm that there is no CWM recovery for our phone yet.
Its the normal samsung official recovery i was speaking of.
Turn off phone, press 3 buttons at once (On/off button + home button + volume up button) .
Tre91 said:
I cannot confirm if the phone will be unlocked. But its worth a try.
But many websites charge you to get it unlocked and im not sure if there's a cheaper method.
But i can confirm that there is no CWM recovery for our phone yet.
Its the normal samsung official recovery i was speaking of.
Turn off phone, press 3 buttons at once (On/off button + home button + volume up button) .
Click to expand...
Click to collapse
Okay, i will give it a try, but i think it won't work
I'm looking for a cheap method, i like to tinker with my phone
Is there an official Ace 3 forum?
Molnardani84 said:
Okay, i will give it a try, but i think it won't work
I'm looking for a cheap method, i like to tinker with my phone
Is there an official Ace 3 forum?
Click to expand...
Click to collapse
There are plenty of forums but there's no specific Ace 3 forum yet :/
Oh and i think you should really give it a try.
So i can confirm if it really works
Tre91 said:
There are plenty of forums but there's no specific Ace 3 forum yet :/
Oh and i think you should really give it a try.
So i can confirm if it really works
Click to expand...
Click to collapse
I upgraded the firmware, but the only thing that happened is i don't get the T-mobile logo at startup. The phone still locked to t-mobil
Molnardani84 said:
I upgraded the firmware, but the only thing that happened is i don't get the T-mobile logo at startup. The phone still locked to t-mobil
Click to expand...
Click to collapse
Where do you live ?
And what line do you wanna use the phone with ?
Lemme see if i can get that particular firmware.
Tre91 said:
Where do you live ?
And what line do you wanna use the phone with ?
Lemme see if i can get that particular firmware.
Click to expand...
Click to collapse
I live in Hungary, and I want use it with a vodafone Sim card. I upgraded the firmware, but firmware update doesn't remove sim lock.
Molnardani84 said:
I live in Hungary, and I want use it with a vodafone Sim card. I upgraded the firmware, but firmware update doesn't remove sim lock.
Click to expand...
Click to collapse
Did you download the Hungary - S7275RXXUAML1 ?
Not Hungary (Telenor) - S7275RXXUAML1 ..
Tre91 said:
Did you download the Hungary - S7275RXXUAML1 ?
Not Hungary (Telenor) - S7275RXXUAML1 ..
Click to expand...
Click to collapse
Yes, and the phone works, when it boots, i don't get the t-mobile logo any mor fortunately. But the sim is locked
Molnardani84 said:
Yes, and the phone works, when it boots, i don't get the t-mobile logo any mor fortunately. But the sim is locked
Click to expand...
Click to collapse
Awww that sucks.
Well buddy - > http://unlock.canadagsm.ca/samsung/Samsung-Galaxy-Ace-III-network-unlock-code/
Thats what i got after google search.
If this doesnt work, its time to take it to the shop :3
downgrade gt s7275r
I don't really know where to look but im finding it hard to find hard to find firmware for gt s7275r im currently running xxuanb2 rooted - android vers: 4.2.2 with cwm recovery, but I was wondering is there any way possible I could downgrade to 4.2.1??. ive tried looking everywhere but no success and woud really appreciate some help in this matter , and point me the right way on xda so I know where to post for advice as im a noobie on this foruim.
Molnardani84 said:
Does any of you know how to sim unlock the specified phone? (GT-S7275R)
Click to expand...
Click to collapse
Use ChimeraTool. It supports.
Hi - those firmware links are now dead (not the website, but the download links within that). Any alternative locations? Thanks, Geoff
Note: Flashing different firmware will NOT unlock a phone that is locked to a particular service providers sim you will need to get the unlock code from your provider or from one of the online services.
There are several online providers that can unlock GT-S7275 series phones online. The best ones will use a client software package that you download and install on your computer. You then need to pay them for the unlock before you can unlock the phone. Part of the process is changing your phone to Diag mode by setting the USB to DM+MODEM+ADB this is done by dialing *#0808# however on some S7275 Phones like the Telstra Australia GT-S7275Y dialing this code will not access the needed menu however it can still be accessed.
For Telstra Australia GT-S7275Y and similar phones you need to open the stock calculator app and type (+30012012732+ (note that the ( and the + signs must be typed) this will then open the Factory Mode dialler you can then type *#0808# and the menu will appear.
Don't forget to put your phone back to MTP+ADB (the default setting after unlocking).
I purchase a like-new condition Samsung Galaxy S9+ phone from Amazon Warehouse for international travel coming up in couple days. I figured I would have a better chance of getting an authentic phone from Amazon than from ebay sellers. I received the phone yesterday, and here is the situation with the phone:
- The box of the phone says "unlocked by Samsung"
- The sticker on the back of the phone has the model # SM-G965UZBAXAA and IMEI number of a factory unlocked phone
- The actual IMEI of the phone however shows model # SM-G965UZBAATT, which corresponds to the AT&T carrier locked phone
- When I turn on the phone, it shows T-mobile screen and has T-mobile apps on it
How do I determine whether this is a AT&T phone, or a T-mobile phone or something else? Unfortunately, I do not have either TMO or ATT sim cards that I can use to check which network the phone works on. How do I know whether this phone is unlocked and if it is will work internationally? I am not sure how to explain the imei of the phone coming up with ATT model number, yet the phone shows TMO screen.
Please help as I need to get this resolved today, and don't have time to purchase another phone. Thanks much in advance!!
prince_a1 said:
I purchase a like-new condition Samsung Galaxy S9+ phone from Amazon Warehouse for international travel coming up in couple days. I figured I would have a better chance of getting an authentic phone from Amazon than from ebay sellers. I received the phone yesterday, and here is the situation with the phone:
- The box of the phone says "unlocked by Samsung"
- The sticker on the back of the phone has the model # SM-G965UZBAXAA and IMEI number of a factory unlocked phone
- The actual IMEI of the phone however shows model # SM-G965UZBAATT, which corresponds to the AT&T carrier locked phone
- When I turn on the phone, it shows T-mobile screen and has T-mobile apps on it
How do I determine whether this is a AT&T phone, or a T-mobile phone or something else? Unfortunately, I do not have either TMO or ATT sim cards that I can use to check which network the phone works on. How do I know whether this phone is unlocked and if it is will work internationally? I am not sure how to explain the imei of the phone coming up with ATT model number, yet the phone shows TMO screen.
Please help as I need to get this resolved today, and don't have time to purchase another phone. Thanks much in advance!!
Click to expand...
Click to collapse
put any sim in it and it should work these phones are multi carrier means all the us models are the same if its att imei id say its unlocked since obviously last used was t mobile but if you put any sim in it other than att it should accept it and not say unnsuported sim and or ask for unlock code
to further this as i said the us models are all the same. They have a file called CSC which determines carrier based settings you can put in a tmobile sim and it will repersonalize for tmobile then swap to att and att will show up..
Its the way of the future and actually quite nice as one firmware pretty much covers all carriers other than specific user data which is that carriers apps
it may be unlocked obviously the listing was wrong but xaa is factory unlocked for sims, You can reflash xaa if it is unlocked for non carrier branding,But id put any sim in and see
TheMadScientist said:
They have a file called CSC which determines carrier based settings you can put in a tmobile sim and it will repersonalize for tmobile then swap to att and att will show up..
Click to expand...
Click to collapse
Thanks for your response. So if the previous owner put a T-mobile sim in the AT&T phone, then would it show the T-mobile screen at startup, and also have the T-mobile branded apps?
prince_a1 said:
Thanks for your response. So if the previous owner put a T-mobile sim in the AT&T phone, then would it show the T-mobile screen at startup, and also have the T-mobile branded apps?
Click to expand...
Click to collapse
Yes the csc files are multi carrier the phone will do a New sim inserted please reboot to apply new carrier configuration
and it will reboot and install the inserted sims carrier based bloat apps
TheMadScientist said:
Yes the csc files are multi carrier the phone will do a New sim inserted please reboot to apply new carrier configuration
and it will reboot and install the inserted sims carrier based bloat apps
Click to expand...
Click to collapse
Thanks again! Is it safe for me to do a factory reset on the phone? I wasn't sure if it was rooted and whether a factory reset might brick it. If I do a factory reset, what would it restore to - the AT&T or TMO configuration, or something else?
prince_a1 said:
Thanks again! Is it safe for me to do a factory reset on the phone? I wasn't sure if it was rooted and whether a factory reset might brick it. If I do a factory reset, what would it restore to - the AT&T or TMO configuration, or something else?
Click to expand...
Click to collapse
Yes its safe go into settings and account backup restore it should show factory data reset Thats the proper way to get rig of a google account on the device It will stay as is until a new sim is inserted factory resets have nothing to do with it
TheMadScientist said:
Yes its safe go into settings and account backup restore it should show factory data reset Thats the proper way to get rig of a google account on the device It will stay as is until a new sim is inserted factory resets have nothing to do with it
Click to expand...
Click to collapse
Thank you so much for the information! Highly appreciated!!
TheMadScientist said:
Yes the csc files are multi carrier the phone will do a New sim inserted please reboot to apply new carrier configuration
and it will reboot and install the inserted sims carrier based bloat apps
Click to expand...
Click to collapse
I downloaded the phoneinfo app, and here it what it shows:
Firmware's CSC code: XAA
Active CSC code: TMB
IMEI check shows model ending in: ATT
That made me highly confused as to whether this was a AT&T phone, a T-mobile phone or whether it was originally sold as factory unlocked.
prince_a1 said:
I downloaded the phoneinfo app, and here it what it shows:
Firmware's CSC code: XAA
Active CSC code: TMB
IMEI check shows model ending in: ATT
That made me highly confused as to whether this was a AT&T phone, a T-mobile phone or whether it was originally sold as factory unlocked.
Click to expand...
Click to collapse
So originally it was a att device. Who ever used it used it on tmobile but on xaa which is debloated unlocked
TheMadScientist said:
So originally it was a att device. Who ever used it used it on tmobile but on xaa which is debloated unlocked
Click to expand...
Click to collapse
Under Service Provider SW ver., it shows TMB/XAA/ATT
I am trying to understand what this means, why would it show TMB, XAA and ATT? Does it mean the phone was originally AT&T, then someone installed XAA firmware on it and used it on T-mobile. If that is true, is there a way for me to verify whether the current installed firmware is XAA?
prince_a1 said:
Under Service Provider SW ver., it shows TMB/XAA/ATT
I am trying to understand what this means, why would it show TMB, XAA and ATT? Does it mean the phone was originally AT&T, then someone installed XAA firmware on it and used it on T-mobile. If that is true, is there a way for me to verify whether the current installed firmware is XAA?
Click to expand...
Click to collapse
That is correct. You see it now. The third csc code is the original device. The second is what csc you have running. And the first is or was sim inserted.
Look in settings about phone and software info. At the bottom somewhere it should show you
TheMadScientist said:
That is correct. You see it now. The third csc code is the original device. The second is what csc you have running. And the first is or was sim inserted.
Look in settings about phone and software info. At the bottom somewhere it should show you
Click to expand...
Click to collapse
Yes, what I pasted above is from about phone->software info. It shows the service provider sw version as TMB/XAA/ATT. Thank you!!
Hi,
Can someone post the carrier policy files of the LG V60 LMV600EA version ?
I need this files to enable carrier aggregation on my canadian V60.
Thanks
leptdre said:
Hi,
Can someone post the carrier policy files of the LG V60 LMV600EA version ?
I need this files to enable carrier aggregation on my canadian V60.
Thanks
Click to expand...
Click to collapse
I would like to help you but i have no idea where to find that file. i have the european v60.
[email protected] said:
I would like to help you but i have no idea where to find that file. i have the european v60.
Click to expand...
Click to collapse
Thank you so much for offering your help.
Actually, it is not a difficult process to extract that file.
First thing needed is to install QPST and enable the phone serial port.
After that, you need to open a program called EFS Explorer and then extract the files.
You can find a video that explains the process here
LG-V60 - Google Drive
drive.google.com
leptdre said:
Thank you so much for offering your help.
Actually, it is not a difficult process to extract that file.
First thing needed is to install QPST and enable the phone serial port.
After that, you need to open a program called EFS Explorer and then extract the files.
You can find a video that explains the process here
LG-V60 - Google Drive
drive.google.com
Click to expand...
Click to collapse
Done! hopefully it helps in your process!!
what was this for?
Hi, can you please chare your rfnv files as it is shown in this video ? https://drive.google.com/drive/folders/1YeDpBC-mxATynh7ue3nxKuC3uf6hFMKx
Thank you
[email protected] said:
Done! hopefully it helps in your process!!
Click to expand...
Click to collapse
Hi there would you be able to upload the files somewhere please? Or send them to me if possibe?
@leptdre , were you able to use the files to enable carrier aggregation? Would you be able to upload them somewhere?
Thanks
leptdre said:
Thank you so much for offering your help.
Actually, it is not a difficult process to extract that file.
First thing needed is to install QPST and enable the phone serial port.
After that, you need to open a program called EFS Explorer and then extract the files.
You can find a video that explains the process here
LG-V60 - Google Drive
drive.google.com
Click to expand...
Click to collapse
How are you enabling the V60 serial port. I'm having issues getting it to show up as diag
ebowen 747 said:
How are you enabling the V60 serial port. I'm having issues getting it to show up as diag
Click to expand...
Click to collapse
After installing the Qualcomm drivers, you will see LG Diagnostic Port, and LG Serial Port in device manager. Manually update/replace the serial port driver with Qualcomm HS-USB Diagnostics 9025. Then in the phone hidden menu you have to turn off the diag port under SVC, Port Check Test as shown in the video above. Then it should show up in QPST and EFS explorer
cheesyzombie said:
After installing the Qualcomm drivers, you will see LG Diagnostic Port, and LG Serial Port in device manager. Manually update/replace the serial port driver with Qualcomm HS-USB Diagnostics 9025. Then in the phone hidden menu you have to turn off the diag port under SVC, Port Check Test as shown in the video above. Then it should show up in QPST and EFS explorer
Click to expand...
Click to collapse
Is this with the device in regular boot or edl?
ebowen 747 said:
Is this with the device in regular boot or edl?
Click to expand...
Click to collapse
Regular
cheesyzombie said:
Regular
Click to expand...
Click to collapse
Thank you for your help
leptdre said:
Hi,
Can someone post the carrier policy files of the LG V60 LMV600EA version ?
I need this files to enable carrier aggregation on my canadian V60.
Thanks
Click to expand...
Click to collapse
I have all the carrier_policy.xml files, TM VM EA. But I have some questions first. In which country and what is the name of the Carrier? The only reason I'm asking is: As far as I know, nobody in the US has crossflashed (most have been crossflashing the lmv600am) and really been able to get a 5G signal. Yes, I know it may have the 5G moniker on the taskbar but using Netmonster tells a different story, as do other tools. It's 4g masquerading as 5g. For example, on the v50/v60 on tmob network, using b66 shows it's 5g when it really isn't. When you crossflash with a KDZ the efs partition is not overwritten nor should it be because it contains imei info. Any file (carrier_policy.xml as an example) in the efs to be change has to be DL from the efs partition using Qspt, edit, and then reloaded. Show are you really getting a 5g band on your phone??????
hooutoo said:
I have all the carrier_policy.xml files, TM VM EA. But I have some questions first. In which country and what is the name of the Carrier? The only reason I'm asking is: As far as I know, nobody in the US has crossflashed (most have been crossflashing the lmv600am) and really been able to get a 5G signal. Yes, I know it may have the 5G moniker on the taskbar but using Netmonster tells a different story, as do other tools. It's 4g masquerading as 5g. For example, on the v50/v60 on tmob network, using b66 shows it's 5g when it really isn't. When you crossflash with a KDZ the efs partition is not overwritten nor should it be because it contains imei info. Any file (carrier_policy.xml as an example) in the efs to be change has to be DL from the efs partition using Qspt, edit, and then reloaded. Show are you really getting a 5g band on your phone??????
Click to expand...
Click to collapse
I've been trying forever to get this to work with my ATT with stock FW and when crossflashed to EA, and you're right, I think it just doesn't, regardless of fw version installed. I've pulled the EA EFS policy files as well as the ATT ones, modified them, reuploaded and 5G just will not turn on. I've persisted so long because this method worked fine on my V50, however that one is a V500N (korean variant) whereas this is a V600AM (US/ATT variant), so I think that may have something to do with it. Have tried adding MCC-MNC, editing the rf_band lists, all sorts of combinations. I have a feeling that when the sim is inserted the phone doesn't even look at the modified xml files in the EFS partition and just generates it's own with the american models, but this is just speculation.
The other thing I noticed is that when I edit my ftm file to regain my serial number and remove the NT code error, the outer screen on the dual screen attachment works again, but then I lose 4G altogether and revert to 3G without data.
On my V50 all I had to do was add '5G' to some band lists and it worked, however, that unit is not crossflashed and still has stock korean firmware.
I'm in UK on Hutchison 3 network
cheesyzombie said:
I've been trying forever to get this to work with my ATT with stock FW and when crossflashed to EA, and you're right, I think it just doesn't, regardless of fw version installed. I've pulled the EA EFS policy files as well as the ATT ones, modified them, reuploaded and 5G just will not turn on. I've persisted so long because this method worked fine on my V50, however that one is a V500N (korean variant) whereas this is a V600AM (US/ATT variant), so I think that may have something to do with it. Have tried adding MCC-MNC, editing the rf_band lists, all sorts of combinations. I have a feeling that when the sim is inserted the phone doesn't even look at the modified xml files in the EFS partition and just generates it's own with the american models, but this is just speculation.
The other thing I noticed is that when I edit my ftm file to regain my serial number and remove the NT code error, the outer screen on the dual screen attachment works again, but then I lose 4G altogether and revert to 3G without data.
On my V50 all I had to do was add '5G' to some band lists and it worked, however, that unit is not crossflashed and still has stock korean firmware.
I'm in UK on Hutchison 3 network
Click to expand...
Click to collapse
Well I can tell you that there's a running discussion on a lot of the points you just made not the least of which is whether or not the modem is being provisioned at activation and if so what exactly and how much.
I have 2 lmv600am which I got off Ebay. Both had been crossed to EA fw when I got them. Since I'm on Google Fi, I went to the AT&T unlocking site and Sim unlocked. I then put my G-Fi sim into 1 of my v60 and sure enough I get a 5G moniker on my taskbar. Now during this time period Tmob is changing their policies on LG phones, mainly since LG is no longer in business. For example, lmv450 no longer actives on Tmob nor any of it's mvno's and I believe the same is happening for all Sprint phones plus all LG non-tmob phones. They're checking by imei.
So it didn't take long and bam, I wasn't even getting a 5g moniker. I call G-Fi and asked, WTF. I was told that G-Fi is now only allowing Google and Samsung phones to activate with 5G services, only 4g for V600am. Once again imei strikes. BTW you can page thru modem protocols here; *#546368#*600#>field test>modem settings>engineering mode to see if you even have the 5g protocol loaded. I use to but now I only have 2g, 3g, hspa and lte.
The only reason I'm bringing all this up is because Carrier Policies are changing with LG phones so It's worth a tech support call/chat with your carrier to see what's what on their side.
The next step would be to use a serious network app to verify what really going on. I think in your area the G-Mon app is being used a lot. I use Netmonster in the US. I saw a screen shot from a guy in Poland, I believe, that thought he was getting 5g only to find out that it was really lte+ 3xCA. He was getting 727.3 Mbps on the DL which is absolutely screaming. That’s faster than 99.9 % of the phones in the US.
hooutoo said:
Well I can tell you that there's a running discussion on a lot of the points you just made not the least of which is whether or not the modem is being provisioned at activation and if so what exactly and how much.
I have 2 lmv600am which I got off Ebay. Both had been crossed to EA fw when I got them. Since I'm on Google Fi, I went to the AT&T unlocking site and Sim unlocked. I then put my G-Fi sim into 1 of my v60 and sure enough I get a 5G moniker on my taskbar. Now during this time period Tmob is changing their policies on LG phones, mainly since LG is no longer in business. For example, lmv450 no longer actives on Tmob nor any of it's mvno's and I believe the same is happening for all Sprint phones plus all LG non-tmob phones. They're checking by imei.
So it didn't take long and bam, I wasn't even getting a 5g moniker. I call G-Fi and asked, WTF. I was told that G-Fi is now only allowing Google and Samsung phones to activate with 5G services, only 4g for V600am. Once again imei strikes. BTW you can page thru modem protocols here; *#546368#*600#>field test>modem settings>engineering mode to see if you even have the 5g protocol loaded. I use to but now I only have 2g, 3g, hspa and lte.
The only reason I'm bringing all this up is because Carrier Policies are changing with LG phones so It's worth a tech support call/chat with your carrier to see what's what on their side.
The next step would be to use a serious network app to verify what really going on. I think in your area the G-Mon app is being used a lot. I use Netmonster in the US. I saw a screen shot from a guy in Poland, I believe, that thought he was getting 5g only to find out that it was really lte+ 3xCA. He was getting 727.3 Mbps on the DL which is absolutely screaming. That’s faster than 99.9 % of the phones in the US.
Click to expand...
Click to collapse
Forgot to mention that I noticed that after a fresh flash, the xml files present in the EFS are different before and after inserting my sim.
Interesting but also disappointing to hear about the IMEI checking :/
I've been through hidden menu settings, and depending on which firmware I have installed I can see different bands and modem protocols available/activated, but can still never turn 5G on with my american V60's.
I had so much hope for this handset since firehose was made available!
Which reminds me, I even bootloader unlocked and rooted my crossflashed at&t unit. Successfully install Magisk etc, but couldn't enable r/w on system partition, even after generating and flashing a modified super partition. Something else going on here.
YOU need to check out the v60 group over on Discord.
cheesyzombie said:
Forgot to mention that I noticed that after a fresh flash, the xml files present in the EFS are different before and after inserting my sim.
Interesting but also disappointing to hear about the IMEI checking :/
I've been through hidden menu settings, and depending on which firmware I have installed I can see different bands and modem protocols available/activated, but can still never turn 5G on with my american V60's.
I had so much hope for this handset since firehose was made available!
Which reminds me, I even bootloader unlocked and rooted my crossflashed at&t unit. Successfully install Magisk etc, but couldn't enable r/w on system partition, even after generating and flashing a modified super partition. Something else going on here.
Click to expand...
Click to collapse
Increase the partition expansion to 300 or 400
hooutoo said:
YOU need to check out the v60 group over on Discord.
Click to expand...
Click to collapse
Hah I'm in the group, noticed a couple of your messages after the last post. I'm zobocop
ebowen 747 said:
Increase the partition expansion to 300 or 400
Click to expand...
Click to collapse
How do you change partition sizes?