Hi all, I'm from Argentina and I have been reading the forum for at least 5 complete days now !!
My phone is Xperia Mini Pro SK17a
I have done so far:
+Updated Stock Firmware to .58 (not .62 because of not knowing how to root it)
+Rooted the phone
+Installed Flashtool 0.6.7.0 in PC and check good connectivity successfully
+Unlocked the phone bootloader with S1Tool (using the testpoint method) successfully
+Installed CWM 5.0.2.7 in phone successfully
+Downloaded ROM CM7.2 (boot.img + update.zip)
I'm stuck in
-How should I install the boot.img with flashtool ?
-Cant't find the answer: Is absolutely necessary having the .62 stock version before updating to CM7.2 or I can stay with .58 already rooted? if so, how to root .62 in understandable steps?
Hope I'm not committing the crime of repost already answered questions. Too much I have read in the previous days and my brain is a little burnt out ! haha
thank you guys your work is the best !
regards,
Pablo
I used this guide when I installed CM7.1 on my phone some month ago:
http://wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Mini_Pro:_Full_Update_Guide
Upgraded to baseband ...64 ( http://uploaded.to/folder/yrqfhn ) a few weeks ago, with Flashtool while I had CM7.2 installed and nothing happens to your CM7.2 installation, it is "only" the radio firmware that gets upgraded, and it will stay rooted afterwards.
Yo te contesto en español :
Mira este tutorial en español
http://www.htcmania.com/showthread.php?t=330599
Pero actualizar a la versión .62 no es tan importante , yo tengo la versioon .58 y he flashedo cyanogen , pero cyanogen mod 7 no te lo recomiendo del todo por que no funciona el teclado y , no puedes modificarle las cosas mejor prueba la nerodroid rom o hybrom ,o si quieres probrar ice cream sándwich busca ahy hay varias rom , pero aún están en prueba , por que tiene muchos bugs
Espero haberte ayudado
Pd . Nunca actualizes tu teléfono vía ota (on the air)
Jamás Desde el teléfono !!
Enviado desde mi SK17i usando Tapatalk
pablo.alonso said:
Hi all, I'm from Argentina and I have been reading the forum for at least 5 complete days now !!
My phone is Xperia Mini Pro SK17a
I have done so far:
+Updated Stock Firmware to .58 (not .62 because of not knowing how to root it)
+Rooted the phone
+Installed Flashtool 0.6.7.0 in PC and check good connectivity successfully
+Unlocked the phone bootloader with S1Tool (using the testpoint method) successfully
+Installed CWM 5.0.2.7 in phone successfully
+Downloaded ROM CM7.2 (boot.img + update.zip)
I'm stuck in
-How should I install the boot.img with flashtool ?
-Cant't find the answer: Is absolutely necessary having the .62 stock version before updating to CM7.2 or I can stay with .58 already rooted? if so, how to root .62 in understandable steps?
Hope I'm not committing the crime of repost already answered questions. Too much I have read in the previous days and my brain is a little burnt out ! haha
thank you guys your work is the best !
regards,
Pablo
Click to expand...
Click to collapse
i made a hole post for that here:http://forum.xda-developers.com/showthread.php?t=1500226
Hi hnl_dk !
can you elaborate a little more about this topic of baseband .64 ? I haven't found enough information to connect the dots in the process of understanding what's that you mention and how will help me.
Also the guide you suggested is written for using java+googleADB SDK and I'm trying to do it with flashtool.
Hola Edwarddd !
Muchas gracias por la consideracion del idioma, aunque me manejo bastante fluido en ingles. Voy a hecharle un vistazo a las roms que me sugieres, la verdad es que me incline por probar primero la cyanogen porque considero que es un proyecto basetante serio, con mantenimiento regular y bien documentado.
Podrias contarme un poco mas acerca de las ventajas de los dos nombres que me sugeris? Incluso me interesaria escuchar cual usas tu? Gracias Amigo
Hi akshay13071990
Your answer and 'original' post are flawless, my thanks to you.
Only one little issue maybe you can help me further... When I tray to enter in Flashtool in FastBoot Mode, look what happens:
20/016/2012 00:16:44 - INFO - <- This level is successfully initialized
20/016/2012 00:16:44 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
20/016/2012 00:16:44 - INFO - You can drag and drop ftf files here to start flashing them
20/016/2012 00:16:50 - INFO - Device connected with USB debugging on
20/016/2012 00:16:50 - INFO - Connected device : SK17
20/016/2012 00:16:50 - INFO - Installed version of busybox : BusyBox v1.18.4 (2011-04-04 18:40:20 CDT) multi-call binary.
20/016/2012 00:16:50 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf
20/016/2012 00:16:51 - INFO - Root Access Allowed
20/019/2012 00:19:06 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
20/019/2012 00:19:06 - INFO - Device Status: ADB mode
20/020/2012 00:20:22 - INFO - Please wait device is rebooting into fastboot mode (via ADB)
20/020/2012 00:20:24 - INFO - Device will soon enter fastboot mode
20/020/2012 00:20:25 - INFO - Device disconnected
20/020/2012 00:20:45 - INFO - Device connected with USB debugging off
20/020/2012 00:20:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
20/020/2012 00:20:46 - INFO - Device disconnected
20/020/2012 00:20:47 - INFO - Device connected with USB debugging on
20/020/2012 00:20:48 - INFO - Connected device : SK17
20/020/2012 00:20:48 - INFO - Installed version of busybox : BusyBox v1.18.4 (2011-04-04 18:40:20 CDT) multi-call binary.
20/020/2012 00:20:48 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf
20/021/2012 00:21:10 - INFO - Root Access Allowed
20/023/2012 00:23:12 - INFO - Please wait device is rebooting into fastboot mode (via ADB)
20/023/2012 00:23:14 - INFO - Device will soon enter fastboot mode
20/023/2012 00:23:15 - INFO - Device disconnected
20/023/2012 00:23:32 - INFO - Device connected with USB debugging off
20/023/2012 00:23:32 - INFO - For 2011 devices line, be sure you are not in MTP mode
20/023/2012 00:23:36 - INFO - Device disconnected
20/024/2012 00:24:11 - INFO - Device disconnected
20/024/2012 00:24:28 - INFO - Device connected with USB debugging off
20/024/2012 00:24:28 - INFO - For 2011 devices line, be sure you are not in MTP mode
20/024/2012 00:24:32 - INFO - Device disconnected
20/024/2012 00:24:34 - INFO - Device connected with USB debugging on
20/024/2012 00:24:34 - INFO - Connected device : SK17
20/024/2012 00:24:34 - INFO - Installed version of busybox : BusyBox v1.18.4 (2011-04-04 18:40:20 CDT) multi-call binary.
20/024/2012 00:24:34 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf
I have tried several times and there is no way to enter fastboot mode....
I have even used manually level up key while in the rebooting process and only I get to reach is CWM 5.0.2.7 that I have installed. And in that step, no flashtool connection.
Any Idea what to do or what could I be missing ?
Thank you all,
regards
Pablo
pablo.alonso said:
Hi hnl_dk !
can you elaborate a little more about this topic of baseband .64 ? I haven't found enough information to connect the dots in the process of understanding what's that you mention and how will help me.
Also the guide you suggested is written for using java+googleADB SDK and I'm trying to do it with flashtool.
Hola Edwarddd !
Muchas gracias por la consideracion del idioma, aunque me manejo bastante fluido en ingles. Voy a hecharle un vistazo a las roms que me sugieres, la verdad es que me incline por probar primero la cyanogen porque considero que es un proyecto basetante serio, con mantenimiento regular y bien documentado.
Podrias contarme un poco mas acerca de las ventajas de los dos nombres que me sugeris? Incluso me interesaria escuchar cual usas tu? Gracias Amigo
Hi akshay13071990
Your answer and 'original' post are flawless, my thanks to you.
Only one little issue maybe you can help me further... When I tray to enter in Flashtool in FastBoot Mode, look what happens:
20/016/2012 00:16:44 - INFO - <- This level is successfully initialized
20/016/2012 00:16:44 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
20/016/2012 00:16:44 - INFO - You can drag and drop ftf files here to start flashing them
20/016/2012 00:16:50 - INFO - Device connected with USB debugging on
20/016/2012 00:16:50 - INFO - Connected device : SK17
20/016/2012 00:16:50 - INFO - Installed version of busybox : BusyBox v1.18.4 (2011-04-04 18:40:20 CDT) multi-call binary.
20/016/2012 00:16:50 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf
20/016/2012 00:16:51 - INFO - Root Access Allowed
20/019/2012 00:19:06 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
20/019/2012 00:19:06 - INFO - Device Status: ADB mode
20/020/2012 00:20:22 - INFO - Please wait device is rebooting into fastboot mode (via ADB)
20/020/2012 00:20:24 - INFO - Device will soon enter fastboot mode
20/020/2012 00:20:25 - INFO - Device disconnected
20/020/2012 00:20:45 - INFO - Device connected with USB debugging off
20/020/2012 00:20:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
20/020/2012 00:20:46 - INFO - Device disconnected
20/020/2012 00:20:47 - INFO - Device connected with USB debugging on
20/020/2012 00:20:48 - INFO - Connected device : SK17
20/020/2012 00:20:48 - INFO - Installed version of busybox : BusyBox v1.18.4 (2011-04-04 18:40:20 CDT) multi-call binary.
20/020/2012 00:20:48 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf
20/021/2012 00:21:10 - INFO - Root Access Allowed
20/023/2012 00:23:12 - INFO - Please wait device is rebooting into fastboot mode (via ADB)
20/023/2012 00:23:14 - INFO - Device will soon enter fastboot mode
20/023/2012 00:23:15 - INFO - Device disconnected
20/023/2012 00:23:32 - INFO - Device connected with USB debugging off
20/023/2012 00:23:32 - INFO - For 2011 devices line, be sure you are not in MTP mode
20/023/2012 00:23:36 - INFO - Device disconnected
20/024/2012 00:24:11 - INFO - Device disconnected
20/024/2012 00:24:28 - INFO - Device connected with USB debugging off
20/024/2012 00:24:28 - INFO - For 2011 devices line, be sure you are not in MTP mode
20/024/2012 00:24:32 - INFO - Device disconnected
20/024/2012 00:24:34 - INFO - Device connected with USB debugging on
20/024/2012 00:24:34 - INFO - Connected device : SK17
20/024/2012 00:24:34 - INFO - Installed version of busybox : BusyBox v1.18.4 (2011-04-04 18:40:20 CDT) multi-call binary.
20/024/2012 00:24:34 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf
I have tried several times and there is no way to enter fastboot mode....
I have even used manually level up key while in the rebooting process and only I get to reach is CWM 5.0.2.7 that I have installed. And in that step, no flashtool connection.
Any Idea what to do or what could I be missing ?
Thank you all,
regards
Pablo
Click to expand...
Click to collapse
ok..first open flashtool(newer version)..now power of your phone..hold volume up button and connect via usb cable..flashtool will say connected in fastboot mode..now just click on flash..then there will be two options..flasboot mode and fastboot mode..click on fastboot mode..then click on select kernel to flash..navigate to where your flash file is located(boot.img)..double click on that boot.img file..after installation boot.img click on reboot device into system..and u are on the custom kernel
akshay13071990 said:
ok..first open flashtool(newer version)..now power of your phone..hold volume up button and connect via usb cable..flashtool will say connected in fastboot mode..now just click on flash..then there will be two options..flasboot mode and fastboot mode..click on fastboot mode..then click on select kernel to flash..navigate to where your flash file is located(boot.img)..double click on that boot.img file..after installation boot.img click on reboot device into system..and u are on the custom kernel
Click to expand...
Click to collapse
I cannot find a way of getting into fastboot mode....
is there something more I might be missing.... drivers, or something ?
If I press volume-up key when the blue light is on the phone enters in CWM Recovery. If I leave it pressed the phone enters in the charging battery state... Flashtool only says :
20/004/2012 01:04:49 - INFO - Device connected with USB debugging off
20/004/2012 01:04:49 - INFO - For 2011 devices line, be sure you are not in MTP mode
I have found an option in Help (Check Drivers):
20/005/2012 01:05:49 - INFO - List of connected devices (Device Id) :
20/005/2012 01:05:49 - INFO - - USB\VID_0FCE&PID_E166\42583930324B374A4D31 Driver installed : true
20/005/2012 01:05:49 - INFO - List of ADB devices :
20/005/2012 01:05:49 - INFO - - none
20/005/2012 01:05:49 - INFO - List of fastboot devices :
20/005/2012 01:05:49 - INFO - - none
is this OK?
thanks again!
Pablo
pablo.alonso said:
I cannot find a way of getting into fastboot mode....
is there something more I might be missing.... drivers, or something ?
If I press volume-up key when the blue light is on the phone enters in CWM Recovery. If I leave it pressed the phone enters in the charging battery state... Flashtool only says :
20/004/2012 01:04:49 - INFO - Device connected with USB debugging off
20/004/2012 01:04:49 - INFO - For 2011 devices line, be sure you are not in MTP mode
I have found an option in Help (Check Drivers):
20/005/2012 01:05:49 - INFO - List of connected devices (Device Id) :
20/005/2012 01:05:49 - INFO - - USB\VID_0FCE&PID_E166\42583930324B374A4D31 Driver installed : true
20/005/2012 01:05:49 - INFO - List of ADB devices :
20/005/2012 01:05:49 - INFO - - none
20/005/2012 01:05:49 - INFO - List of fastboot devices :
r 20/005/2012 01:05:49 - INFO - - none
is this OK?
thanks again!
Pablo
Click to expand...
Click to collapse
try another method of flashing custom kernel..did you install all drivers properly..adb drivers..they are important
Personally I do not power on the phone first...
What I do, with a powered off phone...
I "just" hold the volume up button down, while I connect the phone with the USB cable. Then when the LED has turned blue, do I let the volume up button go and it is in fastboot mode. I do not touch the power button.
OK guys some problem with fastboot mode is going on here....
I have unlocked phone using Testpoint method OK, but for some reason fastboot mode do not occur.
I attach here an image: (forum rulz don't let me the usual way)
www shama com ar / xperia / screenshot_1980-01-06_0004.png
As the image says "bootloader unlock allow: NO", maybe this is the problem.
I have tried almost a hundred of times, and see videos and read lots of stuff....
But nothing!!! When I do the procedure, blue led light just keeps 3 secs and then nothing, it turns green and starts charging or go off if I press while still blue a few times level up or down button enters CWM Recovery (5.0.2.7).
Any other suggestion to unlock fastboot mode, highly appreciated!
best regards,
Pablo
PS. Yes I have installed ADB Drivers and tried this two guides:
+http://unlockbootloader.sonyericsson.com/instructions
+http://www.theandroidsoul.com/how-to-unlock-bootloader-xperia-arc-play-neo-pro/
Mira yo era un noob en android , pero luego de desbloquear el bootloader , perdí el miedo de hacer lo que yo quisiera , por que aunque no me lo creas siempre tiene solución , si lo brickeas ya sea por cualquier motivo
Mira con respecto a cyanogen mod 7 , no esta tan perfeccionada , tiene muchos problemas con el teclado
No queda 100% funcional, no funciona la tecla SYM , las letras no están en orden , yo lo he flasheado con ánimos de quedarmela pero no me funciona , yo lo uso mucho para mandar mensajes e-mail , entonces necesito funcionando el teclado al 100%
Para mi la mejor rom es
nerodroid rom v5+ la rage kerneL
La rage kerneL es la mejor de todas por que no se reinicia con el overclock
He probado casi todas las rom , hybrom , nerodroid, cyanogen mod 7 , cyanogen mod 9, mini ICS la rom de kamarush , lewa os etc.. Etc
Pero la mejor es nerodroid , es muy fluida , mucha ram (250 mb) libres , con uso normal ronda los 200 , puedes jugar sin lags , pruebala te la recomiendo
pablo.alonso said:
OK guys some problem with fastboot mode is going on here....
I have unlocked phone using Testpoint method OK, but for some reason fastboot mode do not occur.
I attach here an image: (forum rulz don't let me the usual way)
www shama com ar / xperia / screenshot_1980-01-06_0004.png
As the image says "bootloader unlock allow: NO", maybe this is the problem.
I have tried almost a hundred of times, and see videos and read lots of stuff....
But nothing!!! When I do the procedure, blue led light just keeps 3 secs and then nothing, it turns green and starts charging or go off if I press while still blue a few times level up or down button enters CWM Recovery (5.0.2.7).
Any other suggestion to unlock fastboot mode, highly appreciated!
best regards,
Pablo
PS. Yes I have installed ADB Drivers and tried this two guides:
+http://unlockbootloader.sonyericsson.com/instructions
+http://www.theandroidsoul.com/how-to-unlock-bootloader-xperia-arc-play-neo-pro/
Click to expand...
Click to collapse
Si te dice bootloader unlock allow:no
Es por que no lo tienes liberado el teléfono y no puedes continuar , si quieres tendrás que pagar , métete a htcmanía.com ahí busca la sección xperia mini pro sk17i , ahí encontrarás el tutorial con omnius , que te lo libera y desbloquea el bootloader , aunque son 15 euros a pagar !
Hola Edwarddd, gracias por todos los datos que me aportas, voy a probar a pleno la rom que me estas recomendando ni bien pueda acceder a ese condenado modo fastboot.
De que pais eres tu, españa?
Esta muy interesante el foro de htc, pero tampoco encontre nada demasiado util por ahora, podrias facilitarme el link que mencionas puede ayudarme en el camino del fastboot.
gracias !
saludos,
Pablo
pablo.alonso said:
Hola Edwarddd, gracias por todos los datos que me aportas, voy a probar a pleno la rom que me estas recomendando ni bien pueda acceder a ese condenado modo fastboot.
De que pais eres tu, españa?
Esta muy interesante el foro de htc, pero tampoco encontre nada demasiado util por ahora, podrias facilitarme el link que mencionas puede ayudarme en el camino del fastboot.
gracias !
saludos,
Pablo
Click to expand...
Click to collapse
Ya te mandé el Link anterior donde , tienes que instalar los driver correpondientes para activar el modo fastboot ,
Pd.. Yo soy de Guatemala !!
Enviado desde mi SK17i usando Tapatalk
Ah! si ahora lo veo, pero sucede que no tiene ninguna informacion adicional a lo que ya intente....
Definitely I need to find a way to make the phone able to enter fastboot mode!.....
Why company's do this with our phones.... I have now so much time invested in reading and trying stuff, I feel so frustrated.....
Problem fixed. Thanks Jinx13 !
pablo.alonso said:
Problem fixed. Thanks Jinx13 !
Click to expand...
Click to collapse
Please let us know HOW?
Related
I have unlocked my bootloader and install custom kernels and diferent roms, but I need to go back to stock. So, I downloaded the ftf stock, ics and gb, but the messege is always the same. Could you please help me? I have no problems to install kernel on fastboot mode and roms with cwm, but I want to go back to stock now, and the ftf are not working for me.
21/009/2013 19:09:58 - INFO - <- This level is successfully initialized
21/009/2013 19:09:58 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
21/009/2013 19:09:58 - INFO - You can drag and drop ftf files here to start flashing them
21/010/2013 19:10:03 - INFO - Device disconnected
21/010/2013 19:10:05 - INFO - Selected WT19a_Movistar Argentina _4.0.2.A.0.62.ftf
21/010/2013 19:10:05 - INFO - Preparing files for flashing
21/010/2013 19:10:07 - INFO - Please connect your device into flashmode.
21/010/2013 19:10:15 - INFO - Device connected in flash mode
21/010/2013 19:10:16 - INFO - Opening device for R/W
21/010/2013 19:10:16 - INFO - Reading device information
21/010/2013 19:10:16 - INFO - Phone ready for flashmode operations.
21/010/2013 19:10:16 - INFO - Current device : WT19i - BX902U194P - 1254-9461_R2I - 1250-5829_4.1.B.0.431 - WORLD-a_4.1.B.0.587
21/010/2013 19:10:16 - INFO - Start Flashing
21/010/2013 19:10:16 - INFO - Processing loader
21/010/2013 19:10:16 - INFO - Using an unofficial loader
21/010/2013 19:10:16 - INFO - Ending flash session
21/010/2013 19:10:16 - ERROR - C:\Flashtool\devices\WT19\loader_unlocked.sin (El sistema no puede encontrar el archivo especificado)
21/010/2013 19:10:16 - ERROR - Error flashing. Aborted
21/010/2013 19:10:17 - INFO - Device connected in flash mode
21/010/2013 19:10:18 - INFO - Device disconnected
21/010/2013 19:10:20 - INFO - Device connected in flash mode
21/011/2013 19:11:00 - INFO - Device disconnected
eli_porto said:
I have unlocked my bootloader and install custom kernels and diferent roms, but I need to go back to stock. So, I downloaded the ftf stock, ics and gb, but the messege is always the same. Could you please help me? I have no problems to install kernel on fastboot mode and roms with cwm, but I want to go back to stock now, and the ftf are not working for me.
21/009/2013 19:09:58 - INFO - <- This level is successfully initialized
21/009/2013 19:09:58 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
21/009/2013 19:09:58 - INFO - You can drag and drop ftf files here to start flashing them
21/010/2013 19:10:03 - INFO - Device disconnected
21/010/2013 19:10:05 - INFO - Selected WT19a_Movistar Argentina _4.0.2.A.0.62.ftf
21/010/2013 19:10:05 - INFO - Preparing files for flashing
21/010/2013 19:10:07 - INFO - Please connect your device into flashmode.
21/010/2013 19:10:15 - INFO - Device connected in flash mode
21/010/2013 19:10:16 - INFO - Opening device for R/W
21/010/2013 19:10:16 - INFO - Reading device information
21/010/2013 19:10:16 - INFO - Phone ready for flashmode operations.
21/010/2013 19:10:16 - INFO - Current device : WT19i - BX902U194P - 1254-9461_R2I - 1250-5829_4.1.B.0.431 - WORLD-a_4.1.B.0.587
21/010/2013 19:10:16 - INFO - Start Flashing
21/010/2013 19:10:16 - INFO - Processing loader
21/010/2013 19:10:16 - INFO - Using an unofficial loader
21/010/2013 19:10:16 - INFO - Ending flash session
21/010/2013 19:10:16 - ERROR - C:\Flashtool\devices\WT19\loader_unlocked.sin (El sistema no puede encontrar el archivo especificado)
21/010/2013 19:10:16 - ERROR - Error flashing. Aborted
21/010/2013 19:10:17 - INFO - Device connected in flash mode
21/010/2013 19:10:18 - INFO - Device disconnected
21/010/2013 19:10:20 - INFO - Device connected in flash mode
21/011/2013 19:11:00 - INFO - Device disconnected
Click to expand...
Click to collapse
Look in the directory folder FlashTool
Ex: C:\FlashTool\devices\R800
and copy the file loader_unlocked to the folder WT19 (from what I saw is that your device)
try flash again
you are my hero!!!
Thanks Gustavo!!! Gracias!!! It worked!!!
eli_porto said:
Thanks Gustavo!!! Gracias!!! It worked!!!
Click to expand...
Click to collapse
for nothing
Att Gustavo RD78
Enviado de meu ST15i usando o Tapatalk 2
Hi!
First I apologize for my English, I am writing with the help of Google translator.
Was using Stock Rom JB (6.2.A.0.400) on my Xperia P when I decided to install the Rom Fidelity JB v1.0. Then installed the THP kernel via fastboot and then installed the rom Fidelity JB v1.0, however my phone does not turn over. When I connect the charger the red led lights up but the screen does not turn on, but when I turn on the pc the Sony PC Companion does not recognize but wondershare mobile go recolhece as the X8 (e15i). :sillyAFUQ!!!
When I try to put another rom or another kernel through Flashtool the following message appears:
01/027/2013 17:27:39 - INFO - <- This level is successfully initialized
01/027/2013 17:27:39 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
01/027/2013 17:27:39 - INFO - You can drag and drop ftf files here to start flashing them
01/027/2013 17:27:44 - INFO - Device connected in flash mode
01/027/2013 17:27:56 - INFO - Selected 6.2.A.0.400LT22I.7z.ftf
01/027/2013 17:27:56 - INFO - Preparing files for flashing
01/027/2013 17:27:57 - INFO - Please connect your device into flashmode.
01/027/2013 17:27:57 - INFO - Opening device for R/W
01/027/2013 17:27:58 - INFO - Reading device information
01/028/2013 17:28:07 - INFO - Unable to read from phone after having opened it.
01/028/2013 17:28:07 - INFO - trying to continue anyway
01/028/2013 17:28:07 - INFO - Start Flashing
01/028/2013 17:28:07 - INFO - Processing loader
01/028/2013 17:28:07 - INFO - Checking header
01/035/2013 17:35:46 - INFO - Ending flash session
01/035/2013 17:35:46 - ERROR - Error in processHeader : 995 : A operação de E/S foi anulada devido a uma saída de thread ou a uma requisição de aplicativo.
01/035/2013 17:35:46 - ERROR - Error flashing. Aborted
The device is one time loading the pc and then the green LED lights up, after a while he turned back to stay with the red LED. Already disconnected the battery and connected again but the problem persists!
:crying: Could someone give me some solution? Any help and welcome!
Seem like your ftf file is corrupt, flash log show that "Error in process Header", redownload another.
GVN.Gallus said:
Seem like your ftf file is corrupt, flash log show that "Error in process Header", redownload another.
Click to expand...
Click to collapse
I did it!!
I had downloaded another file but still wrong!
I used a rubber band to keep pressing the volume + button and connected the xperia on pc. So I could install another kernel, and so after that I could install the FTF again!
Thanks for the help!
i follow guide by LoOpy!:
here his thread
LoOpy! said:
DISCLAIMER: I AM NOT RESPONSIBLE FOR BRICKING YOUR PHONE, or anything for that matter.
Tested 2x R800a. Please let me know if it doesn't work on your device!
THIS WILL WIPE YOUR DEVICE!
So you have a R800 that can't be unlocked officially i.e:
Code:
Bootloader unlock Status: [B]No[/B]
:crying:
What this means is that while we can get the device's bootloader unlocked(TP method), it will not enable fastboot access.
So we lack the ability to flash kernels, in .img formats...but why not just make a FTF packed kernel, which we can flash through flashmode?
I'm actually not sure to tell you the truth(*insert conspiracies*), but that was the solution this whole time...
Note: I have only made FTF versions of Turbo Kernel v3.1 by CosmicDan (R800x/R800a/i/at) I have vouch for the R800a to be working, others will need testing....(just have stock FTF ready to go:fingers-crossed
Requirements
Flashtool
GSM ONLY: Vendor-Unlocked Partition layout
Dev-Host link by fma965
Google Doc's link from [URL="forum.xda-developers.com/showthread.php?t=1817548"]CosmicDan Turbo Kernel [/URL]
Ability to use Flashtool... Read Flashing A FTF by fma965
Paperclip or pin + wire for Testpoint (if BL not unlocked)
S1tool for Testpoint (if BL not unlocked)
STEP 1: BL Unlock Via Test Point method (Locked BL Only)
If your bootloader is currently LOCKED:
Read TP Guide by DragonClawsAreSharp...If you don't feel comfortable doing this...stop reading.
If you are comfortable with unlocking the bootloader then go ahead and do it.
Here is R800 TP location(quick google search): Here, and with red dot...you can use a paperclip and hold it to the (-) battery terminal to achieve the same results as the TP cable the guide shows.
In Flashtool (if you ever noticed):
Code:
S1_Loader_Root_773f - Version : R4A066 / Bootloader status : NOT_ROOTABLE ([I]lies[/I])
will now become:
Code:
S1_Loader_Root_773f,S1_Loader_test_Root_xxxx - Version : r4A069 / Bootloader status : ROOTED ([I]huehue[/I])
STEP 2: Prepare for Kernel
For GSM Only: Flash R800i_4.0.2.A.0.62_phoenixvendor.ftf with Flashtool. Let device fully boot to language selection page.
Read through Turbo Kernel (or what ever kernel.ftf you plan to use)
Grab a rom, look at the compatibility section on the kernel page.
Copy rom over to root directory of phone memory card.
Prepare your body?
STEP 3: Kernel Time + Rom
R800a/at/i Turbo Kernel 3.1 Download
R800x Turbo Kernel 3.1 Download
More Kernels!! Thanks denisfgn
Flash via Flashtool in flashmode.
Unplug usb....press and hold power button until 1 vibration....wait...wait...:victory:
Wait for the blue LED + vibration?, then press Volume Up. You should enter a sexy recovery...
Select: "Slot 1" > "TWRP Recovery" > "Wipe" > Wipe Cache, Dalvik Cache, System, then Factory Reset.
Go back to main page (hit back button), then select "Install", scroll down to the Rom you copied to the device, select and install it.
If you forgot rom: plug phone into computer, then in TWRP Select "Mount"> "Mount USB Storage" copy rom over to phone then install it
Reboot. Done.
This method should work for all Xperia 2011 devices that lack fastboot, but can be/are unlock via testpoint (anyone that can test let me know). Just need kernel to be in packed as a .ftf...
HAS THIS BEEN DONE BEFORE?? Maybe I can't search properly...
References
DragonClawsAreSharp for TP Guide
CosmicDan for Kernel
fma965 for FTF Guide
Flashtool Dev's
wedgess for Kernels
DooMLoRD for Kernel
Yay!! 1st post ever on XDA...
Click to expand...
Click to collapse
but I did these steps:
imauri1990 said:
I'm happy ! it succeeds in my xperia mini pro ( SK17 [ 12w19 ] Unlock Bootloader allowed : no) now have pacman 4.4.2
the steps were followed :
1.First , I unlocked my bootloader with testpoint .
2 . Then , I converted to boot.img That Loopy ftf with tools provided . tools: http://www.mediafire.com/download/u3ez1ud7sfcdcqd/img-to-ftf+%27Axel%27.rar
and a tutorial: https://www.youtube.com/watch?v=ykeRIEaqK8o
if u get error , remember when u install cygwin select "cpio" and "perl".
3 This is VERY IMPORTANT - I copied loader_unlocked.sin from Flashtool/devices/R800 to Flashtool/devices/SK17
4 . Kernel.ftf I flashed I made the
(Note you need to have copied from Flashtool/devices/R800 to Flashtool/devices/SK17 loader_unlocked.sin otherwise you will get the following error ! :
09/004/2013 18:04:12 - INFO - Selected Xperia MiniPro ( SK17i ) / 4.0.2.A.0.42 / HU
09/004/2013 18:04:12 - INFO - Preparing files for flashing
09/004/2013 18:04:15 - INFO - Please connect your device into Flashmode .
09/004/2013 18:04:17 - INFO - Device disconnected
09/004/2013 18:04:26 - INFO - Device connected in flash mode
09/004/2013 18:04:26 - INFO - Opening device for R / W
09/004/2013 18:04:26 - INFO - Reading device information
09/004/2013 18:04:26 - INFO - Phone Flashmode ready for operations .
09/004/2013 18:04:26 - INFO - Current device: SK17a - BX902SQQ7Q - 1250- 1736_R9D - 1244- 7088_4.0.2.A.0.58 - WORLD- a_4.0.2.A.0.58
09/004/2013 18:04:27 - INFO - Start Flashing
09/004/2013 18:04:27 - INFO - Using an unofficial loader
09/004/2013 18:04:27 - INFO - Device loader has not Been identified. Using the one from the bundle
09/004/2013 18:04:27 - INFO - Processing loader.sin
09/004/2013 18:04:27 - INFO - Checking header
09/004/2013 18:04:27 - INFO - Flashing data
09/004/2013 18:04:28 - INFO - Loader : S1_Loader_Root_773f - Version: R4A066 / Boot version: r9A029 / Bootloader status : ROOTED
09/004/2013 18:04:29 - INFO - Processing kernel.sin
09/004/2013 18:04:29 - INFO - Checking header
09/004/2013 18:04:29 - INFO - Ending flash session
09/004/2013 18:04:29 - ERROR - ERR_SEVERITY = " MAJOR " ; ERR_CLASS = " SECURITY_CLASS " ; ERR_STATIC = " SIN_HEAD_VER " ; ERR_DYNAMIC = "Failed to Verify without header" ;
09/004/2013 18:04:29 - ERROR - Error flashing . Aborted
09/004/2013 18:04:29 - INFO - Device connected in flash mode
09/004/2013 18:04:30 - INFO - Device disconnected
09/004/2013 18:04:32 - INFO - Device connected in flash mode)
5 . The next thing I did was start in recovery mode. I flashed the ROM and Gapps .
6 .And after 2 days of intense work and break my head finally enjoying kit kat
:good::good::fingers-crossed::highfive:
Click to expand...
Click to collapse
Do you think there's a chance for my WT19a 12w31 with "bootloader unlock allowed: no"?
Could you share the resulting .ftf? I tried to, but it fails everytime. I don't know, maybe I'm missing something or it only works with the mini pro sk17.
I´ve been trying with my girlfriends mini st15 (already unlocked bootloader via test point) and just can´t make it work.
Does someone have a jellybean ftf kernel for the ST15?? Thank you...
ciran said:
Could you share the resulting .ftf? I tried to, but it fails everytime. I don't know, maybe I'm missing something or it only works with the mini pro sk17.
I´ve been trying with my girlfriends mini st15 (already unlocked bootloader via test point) and just can´t make it work.
Does someone have a jellybean ftf kernel for the ST15?? Thank you...
Click to expand...
Click to collapse
Cada archivo ftf es unico, cada vez que intentes instalar una nueva rom deberas extraer el archivo boot.img de la rom y convertirlo en ftf , luego ingresar al recovery y instalar la rom.
Each ftf file is unique, every time you try to install a new ROM will have to extract the boot.img file in the ROM and turn it into ftf, then enter the recovery and install the rom.
Snake1405 said:
Do you think there's a chance for my WT19a 12w31 with "bootloader unlock allowed: no"?
Click to expand...
Click to collapse
yup, maybe it works
imauri1990 said:
yup, maybe it works
Click to expand...
Click to collapse
cannot get cygwin to work .........extractboot ....
---------- Post added at 01:17 AM ---------- Previous post was at 12:58 AM ----------
got this error on flashtools
09/014/2015 22:14:01 - INFO - Device connected in flash mode
09/014/2015 22:14:23 - INFO - Selected Bundle for sk17i . FW release : kernel cm9. Customization : FTF For Xperia mini pro
09/014/2015 22:14:23 - INFO - Preparing files for flashing
09/014/2015 22:14:23 - INFO - Please connect your device into flashmode.
09/014/2015 22:14:24 - INFO - Opening device for R/W
09/014/2015 22:14:24 - INFO - Reading device information
09/014/2015 22:14:41 - INFO - Unable to read from phone after having opened it.
09/014/2015 22:14:41 - INFO - trying to continue anyway
09/014/2015 22:14:41 - INFO - Start Flashing
09/014/2015 22:14:41 - INFO - Processing loader.sin
09/014/2015 22:14:41 - INFO - Checking header
09/014/2015 22:14:41 - ERROR - Processing of loader.sin finished with errors.
09/014/2015 22:14:41 - INFO - Ending flash session
09/014/2015 22:14:41 - ERROR - Error in processHeader : 22 : El dispositivo no reconoce el comando.
09/014/2015 22:14:41 - ERROR - Error flashing. Aborted
09/014/2015 22:14:41 - INFO - Device disconnected
error proces header..... i have no idea........
contame bien que pasos hiciste y capaz te puedo ayudar.
Did you unlock using the official Sony page?
Or you unlock it using the "TP Guide by DragonClawsAreSharp"?
Edit: already did it. Unlocked successfully. Thanks for the tutorial.
It doesn't work for me. When I'm trying to flash the kernel, it gives me this error:
Code:
26/007/2015 07:07:19 - INFO - Processing loader_unlocked.sin
26/007/2015 07:07:19 - INFO - Checking header
26/007/2015 07:07:19 - INFO - Flashing data
26/007/2015 07:07:19 - INFO - Processing of loader_unlocked.sin finished.
26/007/2015 07:07:20 - INFO - Loader : S1_Loader_Root_773f,S1_Loader_test_Root_xxxx - Version : r4A069 / Boot version : r9A021 / Bootloader status : ROOTED
26/007/2015 07:07:21 - INFO - No bootdelivery to send
26/007/2015 07:07:21 - INFO - Processing kernel.sin
26/007/2015 07:07:21 - INFO - Checking header
26/007/2015 07:07:21 - INFO - Flashing data
26/007/2015 07:07:21 - ERROR - Processing of kernel.sin finished with errors.
26/007/2015 07:07:21 - INFO - Ending flash session
26/007/2015 07:07:21 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="IMAGE_ADDRESS_RANGE";ERR_DYNAMIC="SIN-block eraseblock mismatch";
I've tried to convert a kernel boot.img to ftf like 10 times, I've even tried another kernels, but I get the same error everytime I try to flash. I've followed everything in the tutorials.
I have ST15i by the way.
Could you send me the ftf you've created? So I can test if the ftf was the problem.
After
1. Installing ALL drivers
2. Downloading 29.1.A.0.87 firmware from Xperifirm
3. Creating my .ftf and ftf.torrent from my downloaded firmware with flashTool
4. Connecting my device (E5506) in flashing mode (turned off, volume down then usb)
5. Clicking the lighting bolt to flash, selecting the corresponding firmware and clicking flash
I get this:
Code:
18/032/2016 17:32:55 - INFO - Finished Dumping TA partition 2
18/032/2016 17:32:55 - INFO - TA partition 2 saved to C:\Users\maruchan\.flashTool\registeredDevices\WUJ01LESS4\s1ta\2016-01-18_05-32-53\2.ta
18/032/2016 17:32:55 - INFO - Closing TA partition
18/032/2016 17:32:55 - INFO - Parsing boot delivery
18/032/2016 17:32:55 - INFO - No flash script found. Using 0.9.18 flash engine
18/032/2016 17:32:55 - INFO - Opening TA partition 2
18/032/2016 17:32:55 - INFO - Writing TA unit 00002774. Value : [01]
18/032/2016 17:32:55 - INFO - Closing TA partition
18/032/2016 17:32:55 - INFO - Processing partitions.sin
18/032/2016 17:32:55 - INFO - Checking header
18/032/2016 17:32:55 - INFO - Flashing data
18/032/2016 17:32:55 - INFO - Phone boot version : S1_Boot_MT6752_TC9SP_12. Boot delivery version : 1292_1556 S1_Boot_MT6752_TC9SP_106
18/032/2016 17:32:55 - INFO - Going to flash boot delivery
[COLOR="red"]18/032/2016 17:32:55 - ERROR - missing [/COLOR]
18/032/2016 17:32:55 - INFO - Some files are missing from your boot delivery
18/032/2016 17:32:55 - INFO - Opening TA partition 2
18/032/2016 17:32:55 - INFO - Processing boot.sin
18/032/2016 17:32:55 - INFO - Checking header
18/032/2016 17:32:55 - INFO - Flashing data
[COLOR="Red"]18/032/2016 17:32:55 - ERROR - Processing of boot.sin finished with errors.[/COLOR]
18/032/2016 17:32:55 - INFO - Ending flash session
And im unable to continue, my firmware stays the same. I currently have 5.0 and I am trying to install generic latinamerica 5.1. What am I doing wrong?
You have to select USB Max packet size "128K" instead of "devicemax"
Thanks, that solved my problem!
where did you get the generic 5.1 latinoa america? and which carrier?
yo nomas tengo 5.0 telcel
psicopapaito said:
where did you get the generic 5.1 latinoa america? and which carrier?
yo nomas tengo 5.0 telcel
Click to expand...
Click to collapse
Que tal, yo también tengo la 5.0 de Telcel, pero nos vamos a morir antes de que saquen la oficial de telcel 5.1, así que al rato intentaré flashear este Firm y te aviso si funcionan bien los radios del 4G y todo vale?, saludos.
Flashtool by Androxyde v0.9.19.10
8/2016 01:38:41 - INFO - Selected Bundle for Sony Xperia C5 Ultra (E5533). FW release : 29.0.B.0.161. Customization : Customized FR
20/038/2016 01:38:41 - INFO - Preparing files for flashing
20/038/2016 01:38:48 - INFO - Device connected in flash mode
20/039/2016 01:39:19 - INFO - Please connect your device into flashmode.
20/039/2016 01:39:19 - INFO - Opening device for R/W
20/039/2016 01:39:19 - INFO - Reading device information
20/039/2016 01:39:19 - INFO - Phone ready for flashmode operations.
20/039/2016 01:39:19 - INFO - Opening TA partition 2
20/039/2016 01:39:19 - INFO - Current device : E5533 - WUJ01KDVPX - 1298-7059_R1A - 1295-8225_29.0.B.0.161 - GENERIC_29.0.B.0.161
20/039/2016 01:39:19 - INFO - Closing TA partition
20/039/2016 01:39:19 - INFO - Start Flashing
20/039/2016 01:39:20 - INFO - Processing loader.sin
20/039/2016 01:39:20 - INFO - Checking header
20/039/2016 01:39:20 - INFO - Flashing data
20/039/2016 01:39:20 - INFO - Loader : S1_Root_4154 - Version : MT67X2_19 / Boot version : S1_Boot_MT6752_TC9SP_12 / Bootloader status : ROOTED
20/039/2016 01:39:20 - INFO - Max packet size forced to 512K
20/039/2016 01:39:22 - INFO - Making a TA backup
20/039/2016 01:39:22 - INFO - Opening TA partition 1
20/039/2016 01:39:22 - INFO - Start Dumping TA partition 1
Is it normal that it gets stuck in this step? I doesn't go along from this... Any help?
De hecho lo tenia con 5.0 de telcel y baje el 5.1 con Xperifirm y usándolo con telcel va de maravilla. Lte, llamadas todo funciona perfecto. Se corrigieron muchos bugs. Si quieren escribo una guia, yo hasta pude desbloquear el bootloader y hacer root en la 5.1
albertolopezdev said:
De hecho lo tenia con 5.0 de telcel y baje el 5.1 con Xperifirm y usándolo con telcel va de maravilla. Lte, llamadas todo funciona perfecto. Se corrigieron muchos bugs. Si quieren escribo una guia, yo hasta pude desbloquear el bootloader y hacer root en la 5.1
Click to expand...
Click to collapse
Hey una guia estaria bien, yo aun no le he podido hacer el root, menos liberar el bootloader, avientate un manual no? no te pasa que se traba con los videos y se reinicia? ami si, por eso me gustaria actualizarlo, ahi te encargo xD
Hey bro..please use English language in the topic here please.. this is the forum rules.Please OBEY the rules.Thanks
Sent from my E5563 using XDA Premium HD app
BugKiller89 said:
Flashtool by Androxyde v0.9.19.10
8/2016 01:38:41 - INFO - Selected Bundle for Sony Xperia C5 Ultra (E5533). FW release : 29.0.B.0.161. Customization : Customized FR
20/038/2016 01:38:41 - INFO - Preparing files for flashing
20/038/2016 01:38:48 - INFO - Device connected in flash mode
20/039/2016 01:39:19 - INFO - Please connect your device into flashmode.
20/039/2016 01:39:19 - INFO - Opening device for R/W
20/039/2016 01:39:19 - INFO - Reading device information
20/039/2016 01:39:19 - INFO - Phone ready for flashmode operations.
20/039/2016 01:39:19 - INFO - Opening TA partition 2
20/039/2016 01:39:19 - INFO - Current device : E5533 - WUJ01KDVPX - 1298-7059_R1A - 1295-8225_29.0.B.0.161 - GENERIC_29.0.B.0.161
20/039/2016 01:39:19 - INFO - Closing TA partition
20/039/2016 01:39:19 - INFO - Start Flashing
20/039/2016 01:39:20 - INFO - Processing loader.sin
20/039/2016 01:39:20 - INFO - Checking header
20/039/2016 01:39:20 - INFO - Flashing data
20/039/2016 01:39:20 - INFO - Loader : S1_Root_4154 - Version : MT67X2_19 / Boot version : S1_Boot_MT6752_TC9SP_12 / Bootloader status : ROOTED
20/039/2016 01:39:20 - INFO - Max packet size forced to 512K
20/039/2016 01:39:22 - INFO - Making a TA backup
20/039/2016 01:39:22 - INFO - Opening TA partition 1
20/039/2016 01:39:22 - INFO - Start Dumping TA partition 1
Is it normal that it gets stuck in this step? I doesn't go along from this... Any help?
Click to expand...
Click to collapse
Dude..i think your bootloader is unlock when u flashing the firmware..Try to relock the bootloader and flash again..but remember to select the maxfile buffer to 128k not device maxfile size on below..
BugKiller89 said:
Flashtool by Androxyde v0.9.19.10
8/2016 01:38:41 - INFO - Selected Bundle for Sony Xperia C5 Ultra (E5533). FW release : 29.0.B.0.161. Customization : Customized FR
20/038/2016 01:38:41 - INFO - Preparing files for flashing
20/038/2016 01:38:48 - INFO - Device connected in flash mode
20/039/2016 01:39:19 - INFO - Please connect your device into flashmode.
20/039/2016 01:39:19 - INFO - Opening device for R/W
20/039/2016 01:39:19 - INFO - Reading device information
20/039/2016 01:39:19 - INFO - Phone ready for flashmode operations.
20/039/2016 01:39:19 - INFO - Opening TA partition 2
20/039/2016 01:39:19 - INFO - Current device : E5533 - WUJ01KDVPX - 1298-7059_R1A - 1295-8225_29.0.B.0.161 - GENERIC_29.0.B.0.161
20/039/2016 01:39:19 - INFO - Closing TA partition
20/039/2016 01:39:19 - INFO - Start Flashing
20/039/2016 01:39:20 - INFO - Processing loader.sin
20/039/2016 01:39:20 - INFO - Checking header
20/039/2016 01:39:20 - INFO - Flashing data
20/039/2016 01:39:20 - INFO - Loader : S1_Root_4154 - Version : MT67X2_19 / Boot version : S1_Boot_MT6752_TC9SP_12 / Bootloader status : ROOTED
20/039/2016 01:39:20 - INFO - Max packet size forced to 512K
20/039/2016 01:39:22 - INFO - Making a TA backup
20/039/2016 01:39:22 - INFO - Opening TA partition 1
20/039/2016 01:39:22 - INFO - Start Dumping TA partition 1
Is it normal that it gets stuck in this step? I doesn't go along from this... Any help?
Click to expand...
Click to collapse
Make sure your running Flashtool with "admin rights" !!
If it's stuck at that point it's trying to write the TA Backup to your C:/ drive but windows will stop it if it does not have admin rights.
---------- Post added at 01:53 PM ---------- Previous post was at 01:47 PM ----------
skylinestan said:
Dude..i think your bootloader is unlock when u flashing the firmware..Try to relock the bootloader and flash again..but remember to select the maxfile buffer to 128k not device maxfile size on below..
Click to expand...
Click to collapse
Why would you want or need to relock the bootloader unless he is returning the phone to Sony for a warranty repair
bro ayudame yo flashee y se me borro el imei y ahora ya no puedo regresar al ro de telel
Now i have Lollipop 5.1 but my bootloader is now lock, and no allowed to unlock... So, still waiting for the oficial firmware of Telcel. Maybe flashing this, the bootloader can be unlock.
i also have problem in flashing via flashtool i have 5563 model loader.sin processing error then system.bin extract error
i select speed 128K
please tell flashtool version which you r using i m using latest one 0.9.19.10
AnandSadar said:
You have to select USB Max packet size "128K" instead of "devicemax"
Click to expand...
Click to collapse
thanx alot dude.. this just solved my problem too.. my device is E5533 :fingers-crossed::good::highfive:
In wich part do this????
You have to select USB Max packet size "128K" instead of "devicemax"
Hello XDA members !
My CAT S30 is rooted maybe i don't unlock bootloader to use a custom rom.
Fastboot devices => 6278c6cf fastboot
Fastboot oem unlock or fastboot flashing unlock (DC check mode) => "failed <remote : unknow command>
finished. total time : 0.006s"
fastboot oem device-info => "failed <remote : unknow command>
finished. total time : 0.004s"
With app such as Flashify, i used Recovery image and choose a file "Twrp-3.1.1-0-b15q.img" (No img for S30 :silly. When startup on the recovery "Recovery image verification failed".
How to unlock Bootloader CAT S30 ?
Thanks,
Any idea ? Thks.
Nobody ? :crying:
Why ?
Help me please...
You are dead ?
Hi I can't help you for now I am looking to do the same, to root my CAT S30. But after hours don't find anyone who done this...did you try to root with kingroot or towelroot ?
hola, si tu cel funciona, podes sacar una copia de la rom, el mio se queda en el logo
Hola, my Cat S30 works properly. But I don't know how to do a copie rom...
man how did you rooted? help me
I need older firmware 0.017 to root
fefer49 said:
Hello XDA members !
My CAT S30 is rooted maybe i don't unlock bootloader to use a custom rom.
Fastboot devices => 6278c6cf fastboot
Fastboot oem unlock or fastboot flashing unlock (DC check mode) => "failed <remote : unknow command>
finished. total time : 0.006s"
fastboot oem device-info => "failed <remote : unknow command>
finished. total time : 0.004s"
With app such as Flashify, i used Recovery image and choose a file "Twrp-3.1.1-0-b15q.img" (No img for S30 :silly. When startup on the recovery "Recovery image verification failed".
How to unlock Bootloader CAT S30 ?
Thanks,
Click to expand...
Click to collapse
Which firmware?