Hello guys,
I must admit I am an absolute noob a bit out of my depth and panicking a little bit now. I successfully rooted and flashed my phone with a custom rom, the resurrection ics v9.2 however I wanted to go back to stock vodafone rom. So i downloaded BUKE1 vodafone firmware and flashed it using ODIN. Now my phone is stuck in a bootloop with the galaxy S II logo repeatedly appearing. I have just left it as is as I am now too scared to do anything :/
Any advice on what I can do? I know you guys have been over this a million times but I am freaking out.
I have read the boot loop thread above and it says to flash a stock rom using odin but that is what I had already done...
Any help would be greatly appreciated.
Jake
Try wiping all possible things in recovery.
And don't worry, atleast some1 pro will help you to get your phone to boot, also can you get to recovery and download mode
Sent from my sgs2 running cm9 using xda app
Hey thanks for the quick reply, I can get to recovery mode definitely. I just went in and wiped user data / factory reset option. Do you think I should try flashing a different stock vodafone rom?
Ok after wiping user data it now appears to be fine. I'm sorry for wasting your time.
it is recommended that you wipe everything after flashing in order to avoid boot loops or similar errors
glad it worked out for ya
Related
Hi okay so my phone keeps booting to the samsung galaxy s2 screen (the black one in the start)..and then it just shuts off and then goes on again...
I just flashed a new rom. This has happened to me with some other roms too and i thought it was cuz of the rom but this is happening with mulitple roms.
before flash i wiped data/cache, wiped davlik cache
I don't know what hte problem is, but it just keeps looping to the starting black screen..
Please help me flash the batista ics rom!
Do a wipe AFTER you flash the ROM, not before. Good luck.
Sent from my GT-I9100 using XDA
http://forum.xda-developers.com/showthread.php?t=1108499&highlight=loop
Alternatively to any other suggestions, see the thread that is stickied near the very top of the Q&A section called "[READ THIS] Got a Boot Loop? Don't post a New Thread!".
yeah thanks,
not really useful though
can't get into recovery.
I can go into download mode but not recovery.
While i can flash another rom, I really want to flash the batista rom but i keep getting this problem. Is there something else that may be wrong thats not allowing me to install the rom on the phone?
No idea. And frankly, if you want to fix your phone, it's not important right now.
If you can only get into download mode & not recovery, the only way you're fixing this is with an Odin flash. You need to go back to stock, then try a fresh/clean install of whatever rom you were trying to install.
wadokai said:
Is there something else that may be wrong thats not allowing me to install the rom on the phone?
Click to expand...
Click to collapse
Hi got a galaxy tab 10.1 ive got the Kang CM9 ICS rom on it, worked fine for about a month then suddenly just started crashing
did a hard reset device powers on charges starts to load boot image then freezes and crashes.
im able to launch recovery mode, tried doing factory reset and it wouldnt go through.
tried cache whipe was able to complete and the boot logo lasted longer then froze and crashed again.
not sure what happened and im thinking the only thing left to try is a full reflash
has anyone else experianced this?
thanks in advance
alstylez said:
Hi got a galaxy tab 10.1 ive got the Kang CM9 ICS rom on it, worked fine for about a month then suddenly just started crashing
did a hard reset device powers on charges starts to load boot image then freezes and crashes.
im able to launch recovery mode, tried doing factory reset and it wouldnt go through.
tried cache whipe was able to complete and the boot logo lasted longer then froze and crashed again.
not sure what happened and im thinking the only thing left to try is a full reflash
has anyone else experianced this?
thanks in advance
Click to expand...
Click to collapse
I've not experienced this because I haven't messed much with Kang CM9 ICS, but my first suggestion would to be restore from nandroid backup. If you're like me, in the past, you didn't do one or can't access it. So a full reflash or possibly going back to stock and then a reflash would be my suggestion.
If you decide to go back to stock first, or still need to after a reflash, the overcome ROM thread is a good place to lead you to 7500 & 7510 stock ROMs. You'll find a link to a guide outside xda there where towards the bottom part of the guide it says Restocking yer system.
Sent from my GT-P7510 using XDA Premium HD app
thanks Benzoman was able to reflash the stock rom from rogers using ODIN after which it got stuck in a bootloop. then tried data wipe in recovery mode and it booted up like normal.
any idea what could have caused it?
Depends if you had HC 3.1 as a base firmware, more likely to crash, then another would be what version of ICS you used, because the kang is at milestone 4, the current stable march edition.
major problem.
i flashed team perfection objection ics rom. felt that i wanted to go back to stock and thats when the problem showed up.
i havent flashed any other custom rom before the objection ics. i came from stock rooted telus.
tried flashing the tar file from this thread
[STOCK][ODIN][GB][Telus] For those who wish to revert to stock Telus
http://forum.xda-developers.com/showthread.php?p=27508953#post27508953
- sometimes odin freezes but when it doesnt and actually finishes flashing, phone wouldnt start up after the automatic reboot. (how long should i wait for the initial boot to start? i wait for about 2-3 minutes of nothing but black screen before resetting)
i tried flashing the backup files from this thread
[ROOT]For TELUS Note (i717D) - No Flash Counter
http://forum.xda-developers.com/showthread.php?t=1585440&highlight=telus+rooted+system
- after flashing, boots but gets stuck at the "touch the android screen to begin"
anybody have an idea whats going on?
tried 2 different stock tar files through odin and i cant get any of them to work.
i flashed back to the objection rom through cwm to make sure that my phone isnt bricked or anything. seems to be working fine. havent tried any other custom roms though.
any help would be appreciated.
thanks
Hi you may have a partition that is corrapted or there may be something wrong with that telus Odin flash. Go to dev section. There is another Odin flash for telus. It is a stock telus rom rooted that is flashed through Odin. It does work, I hav e used: t before. I will send you a link when I get home from work.
Sent from my SAMSUNG-SGH-I717 using xda premium
I use to have a telus note now I have a rogers note. I may still have a back up of a telus rom. Will check my computure when I get home
Sent from my SAMSUNG-SGH-I717 using xda premium
I may have found your problem. When using Odin, and flashing a backup file, it does not format your phone partitions. So you first have to go into cwm and do a factory wipe, wipe dalvik and go into advance and wipe the other dalvik . Do a battery pull, and now put your phone into download for Odin. I have telus kernel, telus modem and telus stock recovery that can be flashed in cwm. Just not sure if I have the stock from still. Pm me if you have any questions
Sent from my SAMSUNG-SGH-I717 using xda premium
Just a update wipe data, wipe cache and wipe dalvik cache before you use Odin to flash a rom. I told you partly wrong in precise post
Sent from my SAMSUNG-SGH-I717 using xda premium
thanks for the help guys
thanks for the help guys.
i dont know if its a partition problem though but it really got me worried.
for some reason i got it to flash properly and it booted up with no problems.
now im thinking thats its the odin software that was causing the problems. the first one that i used to root my phone a couple of weeks back had an "evo 4g" title at the top. it didnt gave me any problems back then so i ignored it. and thats the same one ive been busting to use last night to flash back to stock. anyhow, i tried using a different odin3 that has "android+slp" label on it and i noticed that it was freezing less and actually finishes the flashing but the bootup still has some problems. i get stuck at the bootup logo for a couple of tries. after sometime i just flashed it over and over again until i hit the jackpot.
is there anyway that i can check if my partitions are still broken? im thinking that i wont be doing any flashing until the update comes in july. the ics roms arent stable enough for me anyway.
oh what do i do if wanna get the official ics update? i have stock system, i think, but its rooted. do i just flash stock kernel and unroot it?
i found an article in lockermikedotcom that allows you to unroot using a batchfile. i was wondering if you guys can point me in the right direction. thanks
If you have a stock rom but it is rooted, flashing a stock kernel usually does not remove root. You would have to install stock recovery first and then you adb to remove the superuser and busbox files from your phone to get it totally stock like it was before you rooted it. This batch file DooMLord_v1_unrooting_zip will unroot your phone .It work on the Rogers Note anyways. http://www.mediafire.com/download.php?7ysrb3v7tfu9t1a
Hey guys, I'm hoping someone can help me out. I've tried searching the forums and using different methods to recover it, but none have worked so far.
SO I flashed the ICS Domination theme over Diet ICS rom, stuff was continuously force closing, so I factory wiped with the intention of re-flashing just the rom... after a reset the phone was stuck on the samsung boot screen.
I've tried using Odin to load the stock Rogers rom, it says it worked, but trying to boot the phone up its stuck on the samsung boot screen.
Am I missing something? Is there anything you guys can suggest I try??
EDIT: Oops, wrong forum, meant to put this in the AT&T forum
Snap my phone is stuck on samsung screen for awhile now, it's not doing anything at all
Wipe everything in recovery and flash a rom from either recovery or odin..
Sent from my GT-I9300 using xda premium
Hey there,
Today I received an MHL-adapter for my Galaxy S3 and wanted to try it out. Since it didn't work in combination with Slim Bean I decided to flash another rom (more on the sammy side of things). Coming across a thread with a guy pointing out a so called Chameleon crossover rom, I decided to give it a go, downloaded and flashed it. I shat bricks as I saw that, in my euphoria to try the adapter, I flashed a rom that was meant to be for the Galaxy S2!
So I restarted into recovery and tried to perform a full wipe, which didn't work, because it wasn't able to load the partitions (data etc.) then I tried to flash on a recent backup of Slim Bean, which was only partly succsessfull, meaning, that it flashed but couldn't wipe because of the reason mentioned above.
Booting into system doesn't work either, I just get a bootloop.
Right now im not quite sure, which step to take. Shall i flash on a clean stock-image via Odin or maybe try out something like One-Click UnBrick?
All your help and suggestions are highly appreciated!
rockband said:
Hey there,
Today I received an MHL-adapter for my Galaxy S3 and wanted to try it out. Since it didn't work in combination with Slim Bean I decided to flash another rom (more on the sammy side of things). Coming across a thread with a guy pointing out a so called Chameleon crossover rom, I decided to give it a go, downloaded and flashed it. I shat bricks as I saw that, in my euphoria to try the adapter, I flashed a rom that was meant to be for the Galaxy S2!
So I restarted into recovery and tried to perform a full wipe, which didn't work, because it wasn't able to load the partitions (data etc.) then I tried to flash on a recent backup of Slim Bean, which was only partly succsessfull, meaning, that it flashed but couldn't wipe because of the reason mentioned above.
Booting into system doesn't work either, I just get a bootloop.
Right now im not quite sure, which step to take. Shall i flash on a clean stock-image via Odin or maybe try out something like One-Click UnBrick?
All your help and suggestions are highly appreciated!
Click to expand...
Click to collapse
Odion stock. If that fails you'll need to find and flash with a PIT
rootSU said:
Odion stock. If that fails you'll need to find and flash with a PIT
Click to expand...
Click to collapse
Thank you so much for the quick response, I'm going to check whether it works and report back after it's done! :good:
G'Luck
Problem solved, thanks rootSU!
So, if someone is following this thread, I just want to share with you guys what I did and how it turned out:
I flashed the original firmware, according to region etc. via Odin, the procedure was succsessfull and I rebooted.
At first I had a bootloop, so I went into the stock recovery and hit "wipe /data and /cache", which was succsessfull as well, meaning that the previous problem with not being able to mount the partitions was resolved. So I went ahead and rebooted again aaand it booted!
Everything is working fine as far as i can tell, no misfunctions, hot reboots or anything similar.
Thanks very much for the quick response rootSU, which prevented me from hyperventilating .
I've rooted, unlocked bootloader and flashed stuff on my former phones (Htc Wildfire, Galaxy S) and I've never done anything like that before and nothing like that ever happened to me. So to anyone reading this, I highly encourage you not to be as dumb as me and to doublecheck what rom you're flashing and not to flash while being overly exicted about anything .
Does your adapter now work?
Sent from my GT-I9300 using xda app-developers app
Never panic. Read lots and dont do anything you don't understand. That's my advice when you're in an S3 pickle
Sent from my GT-I9300 using Tapatalk 2
Very good advice
Sent from my GT-I9300 using xda app-developers app