http://rootzwiki.com/topic/18843-releasealpha2-cyanogenmod-9-touchpad/
I downloaded a modded hulu plus apk and It works on my Touchpad.
Sent from my Touchpad using xda premium
What does a modded hulu plus do?
Another day another ROM, I love the amount of dev support this thing has.
Does it support HD video?
choor said:
Does it support HD video?
Click to expand...
Click to collapse
Yes, it does.
Switching from CN to CM9
I am running CN ICS v3 and want to flash CM9 A2. Can I just wipe dalvik, cache and factory reset and flash the zip from CWM or do I have to do a complete uninstall and then install because of the different kernals? Thanks
hollafront1314 said:
What does a modded hulu plus do?
Click to expand...
Click to collapse
it supports any Android device and let's you connect to your hulu plus account the version from the market doesn't support the touchpad.
Sent from my ADR6425LVW using xda premium
travisross69 said:
I am running CN ICS v3 and want to flash CM9 A2. Can I just wipe dalvik, cache and factory reset and flash the zip from CWM or do I have to do a complete uninstall and then install because of the different kernals? Thanks
Click to expand...
Click to collapse
I think you can just CWM the new CM9 A2 over your current ICS install. It will overwrite your current kernel.
Just make sure you do full wipe, cache and Dalvik cache wipe before you do the flash within CWM.
I just flashed mine from CM9 A.6 and so far so good... Have not tested the Netflix but it seems nice so far and no SODs for the last 4 hours since the flash... I hope never but will see...
cvcduty said:
I think you can just CWM the new CM9 A2 over your current ICS install. It will overwrite your current kernel.
Just make sure you do full wipe, cache and Dalvik cache wipe before you do the flash within CWM.
I just flashed mine from CM9 A.6 and so far so good... Have not tested the Netflix but it seems nice so far and no SODs for the last 4 hours since the flash... I hope never but will see...
Click to expand...
Click to collapse
Did you have Classicnerd loaded? I heard that if you don't do an uninstall it will leave parts of the kernal. I was hoping to do a very good wipe, wipe, wipe and wipe... and wipe some more. Or I can wait for CN to catch up. I do like Leo and the gang.
Thanks for your help.
travisross69 said:
I am running CN ICS v3 and want to flash CM9 A2. Can I just wipe dalvik, cache and factory reset and flash the zip from CWM or do I have to do a complete uninstall and then install because of the different kernals? Thanks
Click to expand...
Click to collapse
I just did
Wipe factory data, wipe cache, wipe dalvik cache each twice. Reboot. Wipe again. Then flash
Do not restore data inky case, YouTube does not work when I tried to restore from CWM. Restore from TB selectively.
Sound seems to be broken. I get no sound from keyboard and the volume rocker cannot control volume. The volume is either mute or maximum.
---------- Post added at 05:21 AM ---------- Previous post was at 05:07 AM ----------
Never mind, a reboot fix the sound problem.
travisross69 said:
I am running CN ICS v3 and want to flash CM9 A2. Can I just wipe dalvik, cache and factory reset and flash the zip from CWM or do I have to do a complete uninstall and then install because of the different kernals? Thanks
Click to expand...
Click to collapse
Do a full wipe then flash uImage remover zip found on classic nerd site, under ics betas folder, then flash cm9 and gapps.
That is exactly what I did and it works great. I wiped three time of each Dalvik, cache and factory reset, flashed the moboot kernal remover, flashed CM9 v2, gapps and rebooted. Went very smooth. From what I understand is that if you don't get rid if the old kernals and you flash over them they cause problems and that is why you flash the moboot kernal remover.
After I logged in I used TB to reinstall my apps and all is well. Very well. The CM team did an outstanding job.
Thank you all for your advice.
Related
so do i need to wipe b4 a flash even if after the last ROM loaded i immediately re-flashed cuz i hated the the ROM? also is wipe necessary if TB really wipes every re-boot?
CleveRuse said:
so do i need to wipe b4 a flash even if after the last ROM loaded i immediately re-flashed cuz i hated the the ROM? also is wipe necessary if TB really wipes every re-boot?
Click to expand...
Click to collapse
I always wipe. Period. I just find it more reliable that way. Just use Titanium Backup Pro and it makes your life very easy.
Edit: and a lot of ROM makers want you to wipe data/davlik/cache before you report a bug.
k ive been using CRW n wiping cache/factory reset then wiping dalvik wut does "wipe cache partition" do? also how does CWM recovery work as it doesn't seem to work from rom manager_ oh it seems i figured it out ,sorry stiil a little fresh
Hey guys, quick question. I am currently running CM7 on my V but it is to unstable for me, too many FC's and reboots. I would like to flash That Ain't Sense ROM, found here:
http://androidforums.com/optimus-v-all-things-root/312747-rom-theme-wait-aint-sense-4-6-2011-a.html
Under the directions, it says:
how to flash:
put gapps and rom on sdcard
wipe the hell out of your phone
flash both and reboot
enjoy
Click to expand...
Click to collapse
When it says, wipe the hell out of the phone, what specifically do I have to wipe, and at what time during the process? Since I am moving to an entirely new ROM, what do I need to wipe?
P.S. I am running thunderc recovery.
Data, cache, system, dalvik cache and something else i can't remember. If am i not wrong, ROMManager doesn't work on the V, so you can't switch back and forth freely, unless there is another method.
RavenSEAL said:
Data, cache, system, dalvik cache and something else i can't remember. If am i not wrong, ROMManager doesn't work on the V, so you can't switch back and forth freely, unless there is another method.
Click to expand...
Click to collapse
Okay do I wipe all of that before flashing or after or what? Its been a while since my last flash.
Sent from my VM670 using XDA App
You wanna wipe before flashing a new ROM. I wipe data/cache, then Dalvik cache then flash ROM, then gapps file
dingermtb said:
You wanna wipe before flashing a new ROM. I wipe data/cache, then Dalvik cache then flash ROM, then gapps file
Click to expand...
Click to collapse
Is that all I have to wipe? I made a nandroid backup but I just want to make sure I'm doing this right.
Sent from my VM670 using XDA App
This should be in Q&A
That's all I wipe. Wiping everything won't hurt though. Just don't do a factory reset through the settings with the phone booted up. Do it through the recovery.
Sent from my LG-VM670 using XDA Premium App
Dear XDAérs,
I recently rommed by SG2 with: Resurrection Remix ics v9.3 black edition XXLPH 4.0.3 FULL-Wipe. However my wifi aint working at all.. i do a wifi scan and enter password for my Wifi and then it says: saved but when i press on it and choose: connect it wont let me connect to it.. Any solutions on this problem? Thanks in advice.
Greetings,
Xanji
Post in the relevant thread: http://forum.xda-developers.com/showthread.php?t=1436854
did you follow the exact steps one page one?
Sent from my GT-I9100 using xda premium running We scrip 9.3 Black edition
drherdman said:
did you follow the exact steps one page one?
Sent from my GT-I9100 using xda premium running We scrip 9.3 Black edition
Click to expand...
Click to collapse
Yeah i did but somehow it doesnt let me use wifi propery..
eSche said:
Post in the relevant thread: http://forum.xda-developers.com/showthread.php?t=1436854
Click to expand...
Click to collapse
Woops sorry
Connect with your computer to the phone using "adb shell" and check with "dmesg" why it fails...
ill recommend a full wipe again and reflash the rom, i used to have a similar problem with both Resurrection and Wanamlite roms, usually after another wipe/clear dalvik it worked like a charm
RorixRebel said:
ill recommend a full wipe again and reflash the rom, i used to have a similar problem with both Resurrection and Wanamlite roms, usually after another wipe/clear dalvik it worked like a charm
Click to expand...
Click to collapse
Hmm i have a normal CMW kernal installed, i cannot find te wipe/clear dalvik on it..
xanji said:
Hmm i have a normal CMW kernal installed, i cannot find te wipe/clear dalvik on it..
Click to expand...
Click to collapse
go into CWM mode and theres an option
wipe data/factory reset
advanced -> wipe dalvik cache
reflash the rom if you are still inside CWM
and test it again
or with a simple wipe on both data and dalvik, without reflashing the rom
try that
RorixRebel said:
go into CWM mode and theres an option
wipe data/factory reset
advanced -> wipe dalvik cache
reflash the rom if you are still inside CWM
and test it again
or with a simple wipe on both data and dalvik, without reflashing the rom
try that
Click to expand...
Click to collapse
tryed it but didnt helped..
Similar problem happened to me several times when i was using MIUI and CM7.
have you tried reboot your router or join some other wireless network?Maybe it's not a ROM related problem.
i installed the STABLE CM9 on GT i9300. It booted fine but when i flashed the Gapps, filemanager etc did not appear after the reboot. I should mention that when flashing CM9 i first wiped the data and then cache using CWM recovery. But i did not wipe data and cache before flashing Gapps.
I need some help please.
Arslanaj said:
i installed the STABLE CM9 on GT i9300. It booted fine but when i flashed the Gapps, filemanager etc did not appear after the reboot. I should mention that when flashing CM9 i first wiped the data and then cache using CWM recovery. But i did not wipe data and cache before flashing Gapps.
I need some help please.
Click to expand...
Click to collapse
File manager is not included in gaaps package..it only consists of Google applications..you will have download that from the market..
And this is not the place to post your questions..try q/a
Sent from my GT-I9300 using xda app-developers app
so how do i get the stock manager etc, apps not included in Gapps?
Arslanaj said:
so how do i get the stock manager etc, apps not included in Gapps?
Click to expand...
Click to collapse
dude, download another one from gplay, it's the same, even better.
hey please help me, i have download the latest version(aroma) but i cant set the face unlock, when i set it up it show black screen (like the front camera not work) any fix.about this? (sorry for my bad english )
please help im really need face unlock
brotherhood13 said:
hey please help me, i have download the latest version(aroma) but i cant set the face unlock, when i set it up it show black screen (like the front camera not work) any fix.about this? (sorry for my bad english )
please help im really need face unlock
Click to expand...
Click to collapse
Did you do a full wipe when installing? Have you tried wiping cache and dalvik and fixing permissions from recovery?
Acvice said:
Did you do a full wipe when installing? Have you tried wiping cache and dalvik and fixing permissions from recovery?
Click to expand...
Click to collapse
Yes, that means wiping /system, /data, /cache, /dalvik-cache, and fixing permissions in recovery.
Or better yet, download Th3Bill's Full Wipe .zip from jokers website.
JustWorksTechnology said:
Yes, that means wiping /system, /data, /cache, /dalvik-cache, and fixing permissions in recovery.
Or better yet, download Th3Bill's Full Wipe .zip from jokers website.
Click to expand...
Click to collapse
I think Acvice means to select full wipe option inside aroma installer. if you do a full wipe before flashing a rom with an aroma installer it will fail because it needs a working rom as a base.
Sent from my MB855 using Tapatalk 2
jrebo said:
I think Acvice means to select full wipe option inside aroma installer. if you do a full wipe before flashing a rom with an aroma installer it will fail because it needs a working rom as a base.
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
Your right, my bad... But if he was installing a new rom without Aroma; He would want to do what I mentioned.
JustWorksTechnology said:
Your right, my bad... But if he was installing a new rom without Aroma; He would want to do what I mentioned.
Click to expand...
Click to collapse
jrebo said:
I think Acvice means to select full wipe option inside aroma installer. if you do a full wipe before flashing a rom with an aroma installer it will fail because it needs a working rom as a base.
Click to expand...
Click to collapse
That is what i meant. But to my knowledge, you 'can' do a full wipe before Aroma, but during the install process you would need to use the volume buttons to select options as the touchscreen won't work. It's just kindof redundant as you get the option to do a full wipe within Aroma anyway.