Just curious.
Has anyone come across a hack for the US Cellular 2.3.5 sbf to allow a flash back to the Sprint sbf?
This would be fantabulous since it was just announced that the Photon will be getting the ICS update in a few months. I'd like to get mine back to stock before that update comes out.
Thanks!
treetolber said:
Just curious.
Has anyone come across a hack for the US Cellular 2.3.5 sbf to allow a flash back to the Sprint sbf?
This would be fantabulous since it was just announced that the Photon will be getting the ICS update in a few months. I'd like to get mine back to stock before that update comes out.
Thanks!
Click to expand...
Click to collapse
The US Cellular Electrify will get it at the same time if not sooner.
themac79 said:
The US Cellular Electrify will get it at the same time if not sooner.
Click to expand...
Click to collapse
But I don't want the Electrify sbf. I need it to be back to Sprint. I'm trying to get the OS back to the Sprint Photon sbf so that I can do the OTA to 4.0 when it becomes available.
If you are rooted and unlocked, you might see a downloadable flashable version of the official rom in here shortly after it comes out.
bradleyw801 said:
If you are rooted and unlocked, you might see a downloadable flashable version of the official rom in here shortly after it comes out.
Click to expand...
Click to collapse
That'st the problem. I can't be unlocked with the Electrify 2.3.5 sbf. It's impossible. I have successfully rooted it but can't install a ROM from recovery. Keeps giving an error. Probably because the bootloader is locked and can't be unlocked.
This is exactly the reason why when I had the 2.3.5 Electrify SBF that I didnt make it a public post.
To this day I still haven't posted it.
People PM'd me for it so they could use it, hack it, whatever, and I warned them that it would lock the phone down.. Of course once I let it out, other people spread it....
Lesson learned I guess.
Cythrawl said:
This is exactly the reason why when I had the 2.3.5 Electrify SBF that I didnt make it a public post.
To this day I still haven't posted it.
People PM'd me for it so they could use it, hack it, whatever, and I warned them that it would lock the phone down.. Of course once I let it out, other people spread it....
Lesson learned I guess.
Click to expand...
Click to collapse
I only flashed it in desperation after I had already jacked my bootloader. Before I flashed this sbf, I tried fastboot flashing every img file out there. None worked then I tried flashing sbf file after file and this is the only one that took without erroring out. I didn't load it on purpose to hack or modify it.
I just want my bootloader unlocked so that I can have at least a fighting chance to get one of Sprint's sbf's flashed.
check your pm's
I have the same issue!! I need to get my phone back to Sprint as well!!! I have the USC 2.3.5
I need the stock uscc 2.3.5 sbf because i am rooted and did the ota and now its partially rooted somehow and im having an issue with my phone speaker and need to send it in under warranty. If anyone could please help id owe you my life. Thanks in advance.
Honestly we should start a bounty for this. I would certainly pay to have this thing unlocked so that I can get back to my regularly scheduled programming.
Sent from my MB855 using Tapatalk
If you had backup made with bootstrap cwm then root with torpedo and put back bootstrap then install recovery and restore the backup, that's what I did.
Sent from my Motorola Electrify using XDA App
Related
Although this is my first post, I have been reading hundreds of threads on this site for months now...
I know this post should be in the developer-related forums but being a newbie I am not allowed to post in that section.
My question is can that SBF be flashed over GingerBlur...here is what I am running with a LOCKED bootloader.
Version.4.1.83.MB860.ATT.en.US
Android 2.2.2
Baseband N_01.77.15P
Kernel 2.63.9-00007-g527fe10
Build GingerBlur 4
Please respond ASAP I just OTA Gingerbread onto my girlfriend's Atrix because she doesn't want to fool around with all this and am DYING to get my hands on a rooted, unlocked Gingerbread Atrix!
At least if you want an unlock bootloader the only option so far for an AT&T unit is flashing pudding no matter what version you have (1.83 or 2.3.4/4.5.91)
cwburns32 said:
Although this is my first post, I have been reading hundreds of threads on this site for months now...
I know this post should be in the developer-related forums but being a newbie I am not allowed to post in that section.
My question is can that SBF be flashed over GingerBlur...here is what I am running with a LOCKED bootloader.
Version.4.1.83.MB860.ATT.en.US
Android 2.2.2
Baseband N_01.77.15P
Kernel 2.63.9-00007-g527fe10
Build GingerBlur 4
Please respond ASAP I just OTA Gingerbread onto my girlfriend's Atrix because she doesn't want to fool around with all this and am DYING to get my hands on a rooted, unlocked Gingerbread Atrix!
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
Seems like this question is asked a lot and I want to know the "straight" answer too. Would downgrading to deodexed 1.8.3 via recovery from Gingerblur be enough in order to flash SBF gingerbread and unlock? Or should I SBF back to an old AT&T version and update to 1.8.3 before going to Gingerbread? Thanks.
LivingChampion said:
Seems like this question is asked a lot and I want to know the "straight" answer too. Would downgrading to deodexed 1.8.3 via recovery from Gingerblur be enough in order to flash SBF gingerbread and unlock? Or should I SBF back to an old AT&T version and update to 1.8.3 before going to Gingerbread? Thanks.
Click to expand...
Click to collapse
I'd use this SBF to flash GB:
http://forum.xda-developers.com/showthread.php?t=1182526
LivingChampion said:
Seems like this question is asked a lot and I want to know the "straight" answer too. Would downgrading to deodexed 1.8.3 via recovery from Gingerblur be enough in order to flash SBF gingerbread and unlock? Or should I SBF back to an old AT&T version and update to 1.8.3 before going to Gingerbread? Thanks.
Click to expand...
Click to collapse
Exactly!! And can it be done over GingerBlur or CherryBlur as I have seen asked on here for the past day or so consistently with no concrete answers.
cwburns32 said:
Exactly!! And can it be done over GingerBlur or CherryBlur as I have seen asked on here for the past day or so consistently with no concrete answers.
Click to expand...
Click to collapse
If you're on 1.8.3 (I don't care what P-ROM you have installed), you can simply flash the above SBF to obtain GB w/o the consequence of not being able to revert to 1.8.3
mpalatsi said:
If you're on 1.8.3 (I don't care what P-ROM you have installed), you can simply flash the above SBF to obtain GB w/o the consequence of not being able to revert to 1.8.3
Click to expand...
Click to collapse
Cheers duude. Just outta curiosity how do you like Ninja Speed Freak v4.5?
cwburns32 said:
Cheers duude. Just outta curiosity how do you like Ninja Speed Freak v4.5?
Click to expand...
Click to collapse
Love it. It's clean, quick, and reliable.
So, using that link will it unlock the bootloader too? P-ROM would be gingerblur correct? I am sorry, I am kind of new to the Atrix scene. Gingerblur was really simple, but the rest is kind of out of my league at the moment.
LivingChampion said:
So, using that link will it unlock the bootloader too? P-ROM would be gingerblur correct? I am sorry, I am kind of new to the Atrix scene. Gingerblur was really simple, but the rest is kind of out of my league at the moment.
Click to expand...
Click to collapse
That's right, it will unlock your bootloader if you were on 1.8.3.
Make sure you have a full battery before flashing!
Charged that baby all night, today was the day I got Gingerbread. I just wanted to make sure everything is in order before flashing.
Just finished installing it, holy crap. Every app is saved. It seems I'm still rooting too. How do I tell if I'm unlocked?
edit: Ah, nevermind I'm not rooted. Guess thats something I'm going to have to do now.
I updated with the official OTA to 2.3 and I've been reading a ton about the hardbrick mess that has surfaced along with the 2.3 update. Basically, I'm wondering what are my options as far as rooting, unlocking, and roms. Or am I SOL for the time being?
rooting, unlocking and roms are available for you. I OTA'd as well..couple days ago I unlocked my Atrix. Only thing you CAN'T do ..now that you've OTA'd.. is you CANNOT downgrade with RSD. That will cause a hardbrick.
Sent from my MB860 using XDA App
Okay, that's as far as my understanding of the matter went haha.
It may seem like a noob question, but what is the need to downgrade?
Hardbricks are from downgrading to a previous firmware.
Sent from my MB860 using XDA App
Yes, I'm aware of that. I want to know why I would need to downgrade?
thezoolander said:
Yes, I'm aware of that. I want to know why I would need to downgrade?
Click to expand...
Click to collapse
sometimes things go wrong when modding your phone. downgrading will restore your phone back to a factory state.
Okay, that's what I was thinking. So couldn't we just create a back up of our 2.3 OTA and revert back to that if something went wrong?
from what i understand you can sbf 4.5.91
"You can sbf 4.5.91 because it has the same identical bl bp pass"
quoted from here..right under the picture.
http://forum.xda-developers.com/showthread.php?t=1160408
thezoolander said:
Okay, that's what I was thinking. So couldn't we just create a back up of our 2.3 OTA and revert back to that if something went wrong?
Click to expand...
Click to collapse
That's the correct way of doing things without hardbricking, yes.
Unlock the BL, install CWM and create a backup of you system before modding.
Whatever you do DO NOT SBF back to earlier build.
Wow! This is the best answer I've been looking for for two days! There should be a lot of deleting and simplifying on this forum. People are going to mess up their phones. Just saying.
thezoolander said:
Yes, I'm aware of that. I want to know why I would need to downgrade?
Click to expand...
Click to collapse
For AT&T users, we had some good hacks that recommended that you went down to original stock Froyo.
Something like that is not an option anymore...
Makes sense, but I do prefer GB over Froyo in so many ways so its worth it for me, and hopefully new hacks and what not will surface in time. I'm patient lol.
well, some people also like to downgrade cause they like Froyo (huh?! who?!) and some people want back fingerprint (but im a patient one, so I won't ditch my gingerbread for something so silly =P). Like everyone said, if you DO need to SBF, just SBF back to 4.5.91. If you have an unlocked bootloader and flashed Tenfar's CWM, however, just eat your Fruitcakes and you'll be good to go. Those are totally safe (as far as I know =D Mmmmmmmm)
Happy upgrading! =]
~jojojohnson7410~
I may have to return my ATRIX due to Let'sTalk horrible customer service, but I was wondering if there is anyway to re-lock the Bootloader, or to hide the fact that it says, Unlocked. Thank you in advanced
Also, I'm sorry if this is in the wrong section, as this is urgent to me and I have yet to see any otherpost relating this topic.
There is another topic like this.
No you can't re-lock and no you can't "hide" the unlock wording. Sorry.
Sent from my AWESOME Atrix
Assume you installed 2.3 using CWM, if that is the case, you can flash the stock 1.8.3. Because the bootloader is not compatible with the unlocked phones, it won't show the "unlocked" text when you turn on the phone. I have tried it when I was trying to get rid if the unlocked text.
The down side is, you won't be able to flash custom ROM until you flash a compatible bootloader.
Sent from my Motorola Atrix 4G MB860 using XDA App
But downgrading will hard brick the phone.be very very carefully.
Reflash To Stock
Unfortunately, there is no way to relock a bootloader. Hence all of the warnings when you committed
but, if you use 4.5.91 the software at the address below should reinstall the newest stock software...
direct.motorola.com/hellomoto/motosupport/source/SoftwareUpdateSelect.asp?country=USA&language=ENS
be careful because Im not sure how motorola update will react to an unlocked bootloader. Ask around...do so at your own risk.
If you want to try a harder, albeit, safer method, and you are sure that you do not have a phone running 4.1.5.91, you can restore your phone to a factory SBF with this process:
briefmobile.com/motorola-atrix-4g-system-boot-file-sbf-leaked
DO NOT UNDER ANY CIRCUMSTANCES TRY TO RESTORE A 4.5.91 system to stock with RSD LITE.
To go to any of the blue webaddresses above, copy-paste them into your browser. Sorry, but I am not allowed to post links yet.
I wonder why nobody has created a CWM downgrade for US Atrixes. NFHimself made one for Bell or international users to go to 2.2.2 Bell and it works really well. Pretty much every partition is replaced. Great for masking that your boot loader is unlocked. Someone should probably do that for ATT to make downgrading less risky than flashing an sbf again...
drpratik said:
But downgrading will hard brick the phone.be very very carefully.
Click to expand...
Click to collapse
The downgrading and hard brick problem stems from using the OTA update, so you won't hard brick if for example you upgraded with KP's 4.5.91.
You also should be able to flash the 4.5.91 SBF. You just can't downgrade. There are other threads about this.
Sent from my Alienated Atrix
maledyris said:
I wonder why nobody has created a CWM downgrade for US Atrixes. NFHimself made one for Bell or international users to go to 2.2.2 Bell and it works really well. Pretty much every partition is replaced. Great for masking that your boot loader is unlocked. Someone should probably do that for ATT to make downgrading less risky than flashing an sbf again...
Click to expand...
Click to collapse
The reason the fruitcakes were created and deemed safe by the devs were because it didn't touch the BL, which people believe to be the culprit behind the hard bricks. NFhimself was brave enough to testing flashing the BL via cwm in his gobstopper on international phones, but I don't think any other devs are willing to risk hard bricking their phones by testing that theory on US phones.
There also isn't enough "reward" for doing so because if people want to downgrade they can use a fruitcake. The only gain is to get rid of the "unlock" text. But if you were really that concerned about it despite reading all the warnings of this will void you warranty, you shouldn't have unlocked in the first place.
maledyris said:
I wonder why nobody has created a CWM downgrade for US Atrixes. NFHimself made one for Bell or international users to go to 2.2.2 Bell and it works really well. Pretty much every partition is replaced. Great for masking that your boot loader is unlocked. Someone should probably do that for ATT to make downgrading less risky than flashing an sbf again...
Click to expand...
Click to collapse
Hi,
One of the reasons I did up a default CWM of 2.2.2 is to have a means of doing a reset after trying all ATT/ORANGE/TELSTRA/MOVIESTAR/etc firmwares out there which may have side effects or accumulated side effects. Hence the inclusion of the stock bootloader and radio and a write of the extra partitions to clean up whatever mix and match leftovers are in there from the various carriers. The other big one is just to be able to get a Bell OTA applied when it comes out, it will probably be similar to the leak, but best to be safe.
This is more of a Bell/Intl issue as ATT folks tend to run just ATT firmware or flash just boot and system via CWM/fastboot and don't have the same issues as flashing a sbf file.
Both the stock 2.2.2 and leaked ap20 OTA bootloaders from Bell are safe to flash after IHOP, this is not the case with ATT bootloaders and may be the case for any included in a sbf file. Finding out the hard way is not an option.
Cheers!
ken218 said:
Assume you installed 2.3 using CWM, if that is the case, you can flash the stock 1.8.3. Because the bootloader is not compatible with the unlocked phones, it won't show the "unlocked" text when you turn on the phone. I have tried it when I was trying to get rid if the unlocked text.
The down side is, you won't be able to flash custom ROM until you flash a compatible bootloader.
Sent from my Motorola Atrix 4G MB860 using XDA App
Click to expand...
Click to collapse
Say I unlocked it at 1.8.3 should I go down to 1.5.7? Is that safe?
moto helper update relocked mine flashed it to 4.5.91 and i had to reunlock and root agin i thought i was getting a driver update not ota.I was on rom homebase + extras but my win 7 64 bit wasent seeing my phone so i reinstalled drivers and updated drivers and updated moto helper and in the process flashed my phone to stock that pissed me off had to start over..I rebooted the phone several times and never seen unlocked on boot tried to fastboot into android recovery and got the triangle im all good now back on homebase ext4 just thought id share that you realy can relock at least it dont say unlocked i beleve its locked
defnow said:
and no you can't "hide" the unlock wording. Sorry.
Click to expand...
Click to collapse
Err...............yes you can!
care to share how?
Scolis said:
care to share how?
Click to expand...
Click to collapse
Read the thread from the start. It's already been said!
CaelanT said:
Read the thread from the start. It's already been said!
Click to expand...
Click to collapse
Trying this today. Seems like my vibrator motor quit working. Phone is 6 months old I should be under the year warranty or so right?
leperkuan said:
Trying this today. Seems like my vibrator motor quit working. Phone is 6 months old I should be under the year warranty or so right?
Click to expand...
Click to collapse
When I was at school 6 months < 1 year so yes!
This is where you need to look:
http://forum.xda-developers.com/showthread.php?t=1163009
CaelanT said:
When I was at school 6 months < 1 year so yes!
This is where you need to look:
http://forum.xda-developers.com/showthread.php?t=1163009
Click to expand...
Click to collapse
Lol well I wasn't sure it had a one year warranty. Found out my vibrator does work. Just sometimes doesn't on cm7. Weird. Well I may try this anyways. Tired of custom Roms.
Sent from my MB860 using Tapatalk
leperkuan said:
Found out my vibrator does work.
Click to expand...
Click to collapse
Think you should go to another site other than XDA with this. Something in the XXX domain should work for you. Too much information for me! LOL................
assuming it is still in warranty
hard brick the phone and return it
just tell them you was doing a software update and your kid unplugged the phone while doing so
Unlocking a stock USCC Electrify tonight using Pudding.
Plan on installing CWM or TWRP (after doing more research or heeding advice).
Not many ROMs say Electrify compatibility is included. Is anyone having any luck flashing these to their Electrify? Is there a universal conversion zip a la the ones used in the D2/DX days?
Mills00013 said:
Unlocking a stock USCC Electrify tonight using Pudding.
Plan on installing CWM or TWRP (after doing more research or heeding advice).
Not many ROMs say Electrify compatibility is included. Is anyone having any luck flashing these to their Electrify? Is there a universal conversion zip a la the ones used in the D2/DX days?
Click to expand...
Click to collapse
it's the same phone minus 4g. everything is compatible with one another. no mods needed. just flash away.
be sure to flash this for eri/roaming fix. it's recommended.
http://forum.xda-developers.com/showthread.php?t=1675772
you can also check out my site below for some electrify info.
good luck on unlocking. not many people have an electrify that they can unlock.
na7q said:
it's the same phone minus 4g. everything is compatible with one another. no mods needed. just flash away.
be sure to flash this for eri/roaming fix. it's recommended.
http://forum.xda-developers.com/showthread.php?t=1675772
you can also check out my site below for some electrify info.
good luck on unlocking. not many people have an electrify that they can unlock.
Click to expand...
Click to collapse
Thanks for the tips, this is exactly what I figured!
I'm not to nervous about the unlocking process, and I know the device I'll be working with this evening is a completely bone stock 2.3.5 USCC device which appears (from my limited reading) to have the best of chances. Any further tips I should know before this? I'm no novice, so feel free to talk as high level as you want.
And your site looks extremely helpful. I'll read through it in it's entirety by the time I attempt the procedure tonight. Thanks for the heads up!
Mills00013 said:
And your site looks extremely helpful. I'll read through it in it's entirety by the time I attempt the procedure tonight. Thanks for the heads up!
Click to expand...
Click to collapse
well 2.3.4 is fully unlockable. 2.3.5 is only unlockable if you have a device that was shipped with 2.3.5. if it was updated or flashed to it you will not be able to unlock it. it's basically permanently locked. no way around it.
good luck!
na7q said:
well 2.3.4 is fully unlockable. 2.3.5 is only unlockable if you have a device that was shipped with 2.3.5. if it was updated or flashed to it you will not be able to unlock it. it's basically permanently locked. no way around it.
good luck!
Click to expand...
Click to collapse
Wait, 2.3.5 is unlockable if the phone came with it? Has this always been the case? Did I miss a memo?
Acvice said:
Wait, 2.3.5 is unlockable if the phone came with it? Has this always been the case? Did I miss a memo?
Click to expand...
Click to collapse
this has always been the case for the electrify. not the photon.
i don't know what took so long for the photon users to get 2.3.5 but the electrify has had it since nov/dec.
Acvice said:
Wait, 2.3.5 is unlockable if the phone came with it? Has this always been the case? Did I miss a memo?
Click to expand...
Click to collapse
If the electrify is shipped with 2.3.5. Its sv1 so you can unlock it. But if it was updated via ota to 2.3.5. Then its sv2 and unlockable.
Sent from my MB855 using xda app-developers app
mof9336 said:
If the electrify is shipped with 2.3.5. Its sv1 so you can unlock it. But if it was updated via ota to 2.3.5. Then its sv2 and unlockable.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Is there a quick way to check the SV level? I assume it might tell me in the bootloader itself?
And thanks for the tips and help again to everyone, very helpful.
Mills00013 said:
Is there a quick way to check the SV level? I assume it might tell me in the bootloader itself?
And thanks for the tips and help again to everyone, very helpful.
Click to expand...
Click to collapse
IIRC, it will error out, harming nothing, if it can't be unlocked. That's what it says in the instructions I received, though.
My Electrify was shipped with 2.3.5, and I'm running Jelly Bean now. I've flashed more ROMs than I can count in the last week alone.
As for the boot loaders (recoveries), CWM-Recovery that comes with the Electrify.zip unlock pack is the same as Joker's v3, and is your standard text-based, no-touch recovery. You navigate with volume and Power is your Enter. TWRP is all-touch, nice as hell. Both should work for you. TWRP is just nicer looking.
I don't know for sure if this is relevant or not, but I know I have an unlocked Electrify that I bought with 2.3.5 on it and unlocked using the files mentioned Here.
If anyone has a 2.3.5 locked photon or electrify that would be willing to test this I would appreciate it. I posted this post in General, but I would hate for some newb bozo to try this and screw up their phone.
My Electrify worked perfectly and it is now retired, If there is an interested dev that could use it I would be happy to let it go as a donation if it would really help. Otherwise I would like to hold onto it.
I hope someone takes the time to try this out.
Thanks
This was done on a USCC Electrify, I don't know what any of these files really contain, ie; radio or what so if you use your phone you may want to be careful
dtrud0h said:
I don't know for sure if this is relevant or not, but I know I have an unlocked Electrify that I bought with 2.3.5 on it and unlocked using the files mentioned Here.
If anyone has a 2.3.5 locked photon or electrify that would be willing to test this I would appreciate it. I posted this post in General, but I would hate for some newb bozo to try this and screw up their phone.
My Electrify worked perfectly and it is now retired, If there is an interested dev that could use it I would be happy to let it go as a donation if it would really help. Otherwise I would like to hold onto it.
I hope someone takes the time to try this out.
Thanks
This was done on a USCC Electrify, I don't know what any of these files really contain, ie; radio or what so if you use your phone you may want to be careful
Click to expand...
Click to collapse
I have a Photon running 2.3.5 that was locked out when I got it. I'm not sure if it was purchased with that version or OTA. I attempted the above and got the normal error when trying unlock that we are all use to. I then tried to SBF to electrify 2.3.5 (got it booted up and running) then attempted again. Same result just errors and no unlock. If any one else tries and ends with different results for the photon please share what you did! Also thanks for sharing dtrud0h!