I may have to return my ATRIX due to Let'sTalk horrible customer service, but I was wondering if there is anyway to re-lock the Bootloader, or to hide the fact that it says, Unlocked. Thank you in advanced
Also, I'm sorry if this is in the wrong section, as this is urgent to me and I have yet to see any otherpost relating this topic.
There is another topic like this.
No you can't re-lock and no you can't "hide" the unlock wording. Sorry.
Sent from my AWESOME Atrix
Assume you installed 2.3 using CWM, if that is the case, you can flash the stock 1.8.3. Because the bootloader is not compatible with the unlocked phones, it won't show the "unlocked" text when you turn on the phone. I have tried it when I was trying to get rid if the unlocked text.
The down side is, you won't be able to flash custom ROM until you flash a compatible bootloader.
Sent from my Motorola Atrix 4G MB860 using XDA App
But downgrading will hard brick the phone.be very very carefully.
Reflash To Stock
Unfortunately, there is no way to relock a bootloader. Hence all of the warnings when you committed
but, if you use 4.5.91 the software at the address below should reinstall the newest stock software...
direct.motorola.com/hellomoto/motosupport/source/SoftwareUpdateSelect.asp?country=USA&language=ENS
be careful because Im not sure how motorola update will react to an unlocked bootloader. Ask around...do so at your own risk.
If you want to try a harder, albeit, safer method, and you are sure that you do not have a phone running 4.1.5.91, you can restore your phone to a factory SBF with this process:
briefmobile.com/motorola-atrix-4g-system-boot-file-sbf-leaked
DO NOT UNDER ANY CIRCUMSTANCES TRY TO RESTORE A 4.5.91 system to stock with RSD LITE.
To go to any of the blue webaddresses above, copy-paste them into your browser. Sorry, but I am not allowed to post links yet.
I wonder why nobody has created a CWM downgrade for US Atrixes. NFHimself made one for Bell or international users to go to 2.2.2 Bell and it works really well. Pretty much every partition is replaced. Great for masking that your boot loader is unlocked. Someone should probably do that for ATT to make downgrading less risky than flashing an sbf again...
drpratik said:
But downgrading will hard brick the phone.be very very carefully.
Click to expand...
Click to collapse
The downgrading and hard brick problem stems from using the OTA update, so you won't hard brick if for example you upgraded with KP's 4.5.91.
You also should be able to flash the 4.5.91 SBF. You just can't downgrade. There are other threads about this.
Sent from my Alienated Atrix
maledyris said:
I wonder why nobody has created a CWM downgrade for US Atrixes. NFHimself made one for Bell or international users to go to 2.2.2 Bell and it works really well. Pretty much every partition is replaced. Great for masking that your boot loader is unlocked. Someone should probably do that for ATT to make downgrading less risky than flashing an sbf again...
Click to expand...
Click to collapse
The reason the fruitcakes were created and deemed safe by the devs were because it didn't touch the BL, which people believe to be the culprit behind the hard bricks. NFhimself was brave enough to testing flashing the BL via cwm in his gobstopper on international phones, but I don't think any other devs are willing to risk hard bricking their phones by testing that theory on US phones.
There also isn't enough "reward" for doing so because if people want to downgrade they can use a fruitcake. The only gain is to get rid of the "unlock" text. But if you were really that concerned about it despite reading all the warnings of this will void you warranty, you shouldn't have unlocked in the first place.
maledyris said:
I wonder why nobody has created a CWM downgrade for US Atrixes. NFHimself made one for Bell or international users to go to 2.2.2 Bell and it works really well. Pretty much every partition is replaced. Great for masking that your boot loader is unlocked. Someone should probably do that for ATT to make downgrading less risky than flashing an sbf again...
Click to expand...
Click to collapse
Hi,
One of the reasons I did up a default CWM of 2.2.2 is to have a means of doing a reset after trying all ATT/ORANGE/TELSTRA/MOVIESTAR/etc firmwares out there which may have side effects or accumulated side effects. Hence the inclusion of the stock bootloader and radio and a write of the extra partitions to clean up whatever mix and match leftovers are in there from the various carriers. The other big one is just to be able to get a Bell OTA applied when it comes out, it will probably be similar to the leak, but best to be safe.
This is more of a Bell/Intl issue as ATT folks tend to run just ATT firmware or flash just boot and system via CWM/fastboot and don't have the same issues as flashing a sbf file.
Both the stock 2.2.2 and leaked ap20 OTA bootloaders from Bell are safe to flash after IHOP, this is not the case with ATT bootloaders and may be the case for any included in a sbf file. Finding out the hard way is not an option.
Cheers!
ken218 said:
Assume you installed 2.3 using CWM, if that is the case, you can flash the stock 1.8.3. Because the bootloader is not compatible with the unlocked phones, it won't show the "unlocked" text when you turn on the phone. I have tried it when I was trying to get rid if the unlocked text.
The down side is, you won't be able to flash custom ROM until you flash a compatible bootloader.
Sent from my Motorola Atrix 4G MB860 using XDA App
Click to expand...
Click to collapse
Say I unlocked it at 1.8.3 should I go down to 1.5.7? Is that safe?
moto helper update relocked mine flashed it to 4.5.91 and i had to reunlock and root agin i thought i was getting a driver update not ota.I was on rom homebase + extras but my win 7 64 bit wasent seeing my phone so i reinstalled drivers and updated drivers and updated moto helper and in the process flashed my phone to stock that pissed me off had to start over..I rebooted the phone several times and never seen unlocked on boot tried to fastboot into android recovery and got the triangle im all good now back on homebase ext4 just thought id share that you realy can relock at least it dont say unlocked i beleve its locked
defnow said:
and no you can't "hide" the unlock wording. Sorry.
Click to expand...
Click to collapse
Err...............yes you can!
care to share how?
Scolis said:
care to share how?
Click to expand...
Click to collapse
Read the thread from the start. It's already been said!
CaelanT said:
Read the thread from the start. It's already been said!
Click to expand...
Click to collapse
Trying this today. Seems like my vibrator motor quit working. Phone is 6 months old I should be under the year warranty or so right?
leperkuan said:
Trying this today. Seems like my vibrator motor quit working. Phone is 6 months old I should be under the year warranty or so right?
Click to expand...
Click to collapse
When I was at school 6 months < 1 year so yes!
This is where you need to look:
http://forum.xda-developers.com/showthread.php?t=1163009
CaelanT said:
When I was at school 6 months < 1 year so yes!
This is where you need to look:
http://forum.xda-developers.com/showthread.php?t=1163009
Click to expand...
Click to collapse
Lol well I wasn't sure it had a one year warranty. Found out my vibrator does work. Just sometimes doesn't on cm7. Weird. Well I may try this anyways. Tired of custom Roms.
Sent from my MB860 using Tapatalk
leperkuan said:
Found out my vibrator does work.
Click to expand...
Click to collapse
Think you should go to another site other than XDA with this. Something in the XXX domain should work for you. Too much information for me! LOL................
assuming it is still in warranty
hard brick the phone and return it
just tell them you was doing a software update and your kid unplugged the phone while doing so
Related
I updated with the official OTA to 2.3 and I've been reading a ton about the hardbrick mess that has surfaced along with the 2.3 update. Basically, I'm wondering what are my options as far as rooting, unlocking, and roms. Or am I SOL for the time being?
rooting, unlocking and roms are available for you. I OTA'd as well..couple days ago I unlocked my Atrix. Only thing you CAN'T do ..now that you've OTA'd.. is you CANNOT downgrade with RSD. That will cause a hardbrick.
Sent from my MB860 using XDA App
Okay, that's as far as my understanding of the matter went haha.
It may seem like a noob question, but what is the need to downgrade?
Hardbricks are from downgrading to a previous firmware.
Sent from my MB860 using XDA App
Yes, I'm aware of that. I want to know why I would need to downgrade?
thezoolander said:
Yes, I'm aware of that. I want to know why I would need to downgrade?
Click to expand...
Click to collapse
sometimes things go wrong when modding your phone. downgrading will restore your phone back to a factory state.
Okay, that's what I was thinking. So couldn't we just create a back up of our 2.3 OTA and revert back to that if something went wrong?
from what i understand you can sbf 4.5.91
"You can sbf 4.5.91 because it has the same identical bl bp pass"
quoted from here..right under the picture.
http://forum.xda-developers.com/showthread.php?t=1160408
thezoolander said:
Okay, that's what I was thinking. So couldn't we just create a back up of our 2.3 OTA and revert back to that if something went wrong?
Click to expand...
Click to collapse
That's the correct way of doing things without hardbricking, yes.
Unlock the BL, install CWM and create a backup of you system before modding.
Whatever you do DO NOT SBF back to earlier build.
Wow! This is the best answer I've been looking for for two days! There should be a lot of deleting and simplifying on this forum. People are going to mess up their phones. Just saying.
thezoolander said:
Yes, I'm aware of that. I want to know why I would need to downgrade?
Click to expand...
Click to collapse
For AT&T users, we had some good hacks that recommended that you went down to original stock Froyo.
Something like that is not an option anymore...
Makes sense, but I do prefer GB over Froyo in so many ways so its worth it for me, and hopefully new hacks and what not will surface in time. I'm patient lol.
well, some people also like to downgrade cause they like Froyo (huh?! who?!) and some people want back fingerprint (but im a patient one, so I won't ditch my gingerbread for something so silly =P). Like everyone said, if you DO need to SBF, just SBF back to 4.5.91. If you have an unlocked bootloader and flashed Tenfar's CWM, however, just eat your Fruitcakes and you'll be good to go. Those are totally safe (as far as I know =D Mmmmmmmm)
Happy upgrading! =]
~jojojohnson7410~
Is there a way to remove the text that says unlocked when you boot.
Sent from my MB860 using Tapatalk
The Pudding thread talks about if 1.8.3 is flashed after pudding then the "reboot" text will no longer appear. However, be very careful with this because many have bricked their phone by flashing 1.8.3 over a GB build. See the sticky threads in the developer forum.
czausmouse said:
Is there a way to remove the text that says unlocked when you boot.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
flash 1.2.6 from here http://forum.xda-developers.com/showthread.php?t=991072
but like that other guy mentioned make sure u r not on GB OTA...
I've installed aura but no otas. Just want to make sure I wouldn't get bricked
Sent from my ATRIX via tapatalk
deziguy420 said:
flash 1.2.6 from here http://forum.xda-developers.com/showthread.php?t=991072
but like that other guy mentioned make sure u r not on GB OTA...
Click to expand...
Click to collapse
Umm no great idea for the people that are not sure how got running GB.... is better always to be on the safe line
Sent from my MB860 using XDA App
czausmouse said:
I've installed aura but no otas. Just want to make sure I wouldn't get bricked
Sent from my ATRIX via tapatalk
Click to expand...
Click to collapse
if you have never updated to GB OTA then use the link that i gave you...and flash 1.2.6..
I have flashed 1.2.6 then rooted, unlocked bootloader, flashed CWM..flashed three different GB ROMs...didn't like it..then I flashed 1.2.6 again using RSD..as long as you have never upgraded to GB via OTA..i think you should be fine...
any solution for those that are running GB OTA?
You can probably flash the 4.5.91 SBF. My understanding is that you just can still flash GB just not Froyo. Hunt around. I think there are other threads about this.
Sent from my Alienated Atrix
lauterm said:
You can probably flash the 4.5.91 SBF. My understanding is that you just can still flash GB just not Froyo. Hunt around. I think there are other threads about this.
Sent from my Alienated Atrix
Click to expand...
Click to collapse
I'v searched around quite a bit, but still couldnt find the answer. I did originaly do the GB OTA. I am currently unlocked running CM7 Beta. My stupid LED flash burnt out again (SECOND FREAKING PHONE) so now i need to take it back within my 30 day's.I would just fix it my self but their are no parts out their for the flash. Im not worried about them going throught the phone logs to see if im unlocked. I just need to hide the text long enough to get past their cursory inspection. From what i have read, it is safe to to do 4.5.91 SBF flash just cannot go lower than that. Just want to make 100% sure before i go along this path.
lauterm said:
You can probably flash the 4.5.91 SBF. My understanding is that you just can still flash GB just not Froyo. Hunt around. I think there are other threads about this.
Sent from my Alienated Atrix
Click to expand...
Click to collapse
Flashing the 4.5.91 SBF is as safe as anything (with normal flashing caveats) and will remove the "unlocked" text from the BL. However, there is a register that can be queried that will show that the bootloader has been unlocked.
If you flash the 1.8.3 SBF you will brick yerself.
You can't "relock" the bootloader.
Source: personal experience (I did the 4.5.91 flash yesterday)
It did work, thank you guys so much.
kyleallen5000 said:
It did work, thank you guys so much.
Click to expand...
Click to collapse
What worked? Flashing with a GB SBF?
which SBF did you use?
Did you get rid of "unlocked" text?
How did you get rid of the 'unlocked' text?, where did you find the official 4.5.91 sbf ?
I want to get rid of mine because I am retentive (is all)!
Do you think we can flash Tenfar/ROMRacer recovery after we are rid of that bane of "unlocked" enunciation?
Do you think we can install the CM7 ?
kyleallen5000 said:
It did work, thank you guys so much.
Click to expand...
Click to collapse
anangphatak said:
How did you get rid of the 'unlocked' text?, where did you find the official 4.5.91 sbf ?
I want to get rid of mine because I am retentive (is all)!
Do you think we can flash Tenfar/ROMRacer recovery after we are rid of that bane of "unlocked" enunciation?
Do you think we can install the CM7 ?
Click to expand...
Click to collapse
you can flash a GINGERBREAD SBF file with RSD lite, but it will revert you back to complete stock.
you will lose the ability to install a custom recovery, and lose the ability to install custom ROMs.
Just curious.
Has anyone come across a hack for the US Cellular 2.3.5 sbf to allow a flash back to the Sprint sbf?
This would be fantabulous since it was just announced that the Photon will be getting the ICS update in a few months. I'd like to get mine back to stock before that update comes out.
Thanks!
treetolber said:
Just curious.
Has anyone come across a hack for the US Cellular 2.3.5 sbf to allow a flash back to the Sprint sbf?
This would be fantabulous since it was just announced that the Photon will be getting the ICS update in a few months. I'd like to get mine back to stock before that update comes out.
Thanks!
Click to expand...
Click to collapse
The US Cellular Electrify will get it at the same time if not sooner.
themac79 said:
The US Cellular Electrify will get it at the same time if not sooner.
Click to expand...
Click to collapse
But I don't want the Electrify sbf. I need it to be back to Sprint. I'm trying to get the OS back to the Sprint Photon sbf so that I can do the OTA to 4.0 when it becomes available.
If you are rooted and unlocked, you might see a downloadable flashable version of the official rom in here shortly after it comes out.
bradleyw801 said:
If you are rooted and unlocked, you might see a downloadable flashable version of the official rom in here shortly after it comes out.
Click to expand...
Click to collapse
That'st the problem. I can't be unlocked with the Electrify 2.3.5 sbf. It's impossible. I have successfully rooted it but can't install a ROM from recovery. Keeps giving an error. Probably because the bootloader is locked and can't be unlocked.
This is exactly the reason why when I had the 2.3.5 Electrify SBF that I didnt make it a public post.
To this day I still haven't posted it.
People PM'd me for it so they could use it, hack it, whatever, and I warned them that it would lock the phone down.. Of course once I let it out, other people spread it....
Lesson learned I guess.
Cythrawl said:
This is exactly the reason why when I had the 2.3.5 Electrify SBF that I didnt make it a public post.
To this day I still haven't posted it.
People PM'd me for it so they could use it, hack it, whatever, and I warned them that it would lock the phone down.. Of course once I let it out, other people spread it....
Lesson learned I guess.
Click to expand...
Click to collapse
I only flashed it in desperation after I had already jacked my bootloader. Before I flashed this sbf, I tried fastboot flashing every img file out there. None worked then I tried flashing sbf file after file and this is the only one that took without erroring out. I didn't load it on purpose to hack or modify it.
I just want my bootloader unlocked so that I can have at least a fighting chance to get one of Sprint's sbf's flashed.
check your pm's
I have the same issue!! I need to get my phone back to Sprint as well!!! I have the USC 2.3.5
I need the stock uscc 2.3.5 sbf because i am rooted and did the ota and now its partially rooted somehow and im having an issue with my phone speaker and need to send it in under warranty. If anyone could please help id owe you my life. Thanks in advance.
Honestly we should start a bounty for this. I would certainly pay to have this thing unlocked so that I can get back to my regularly scheduled programming.
Sent from my MB855 using Tapatalk
If you had backup made with bootstrap cwm then root with torpedo and put back bootstrap then install recovery and restore the backup, that's what I did.
Sent from my Motorola Electrify using XDA App
Unlocking a stock USCC Electrify tonight using Pudding.
Plan on installing CWM or TWRP (after doing more research or heeding advice).
Not many ROMs say Electrify compatibility is included. Is anyone having any luck flashing these to their Electrify? Is there a universal conversion zip a la the ones used in the D2/DX days?
Mills00013 said:
Unlocking a stock USCC Electrify tonight using Pudding.
Plan on installing CWM or TWRP (after doing more research or heeding advice).
Not many ROMs say Electrify compatibility is included. Is anyone having any luck flashing these to their Electrify? Is there a universal conversion zip a la the ones used in the D2/DX days?
Click to expand...
Click to collapse
it's the same phone minus 4g. everything is compatible with one another. no mods needed. just flash away.
be sure to flash this for eri/roaming fix. it's recommended.
http://forum.xda-developers.com/showthread.php?t=1675772
you can also check out my site below for some electrify info.
good luck on unlocking. not many people have an electrify that they can unlock.
na7q said:
it's the same phone minus 4g. everything is compatible with one another. no mods needed. just flash away.
be sure to flash this for eri/roaming fix. it's recommended.
http://forum.xda-developers.com/showthread.php?t=1675772
you can also check out my site below for some electrify info.
good luck on unlocking. not many people have an electrify that they can unlock.
Click to expand...
Click to collapse
Thanks for the tips, this is exactly what I figured!
I'm not to nervous about the unlocking process, and I know the device I'll be working with this evening is a completely bone stock 2.3.5 USCC device which appears (from my limited reading) to have the best of chances. Any further tips I should know before this? I'm no novice, so feel free to talk as high level as you want.
And your site looks extremely helpful. I'll read through it in it's entirety by the time I attempt the procedure tonight. Thanks for the heads up!
Mills00013 said:
And your site looks extremely helpful. I'll read through it in it's entirety by the time I attempt the procedure tonight. Thanks for the heads up!
Click to expand...
Click to collapse
well 2.3.4 is fully unlockable. 2.3.5 is only unlockable if you have a device that was shipped with 2.3.5. if it was updated or flashed to it you will not be able to unlock it. it's basically permanently locked. no way around it.
good luck!
na7q said:
well 2.3.4 is fully unlockable. 2.3.5 is only unlockable if you have a device that was shipped with 2.3.5. if it was updated or flashed to it you will not be able to unlock it. it's basically permanently locked. no way around it.
good luck!
Click to expand...
Click to collapse
Wait, 2.3.5 is unlockable if the phone came with it? Has this always been the case? Did I miss a memo?
Acvice said:
Wait, 2.3.5 is unlockable if the phone came with it? Has this always been the case? Did I miss a memo?
Click to expand...
Click to collapse
this has always been the case for the electrify. not the photon.
i don't know what took so long for the photon users to get 2.3.5 but the electrify has had it since nov/dec.
Acvice said:
Wait, 2.3.5 is unlockable if the phone came with it? Has this always been the case? Did I miss a memo?
Click to expand...
Click to collapse
If the electrify is shipped with 2.3.5. Its sv1 so you can unlock it. But if it was updated via ota to 2.3.5. Then its sv2 and unlockable.
Sent from my MB855 using xda app-developers app
mof9336 said:
If the electrify is shipped with 2.3.5. Its sv1 so you can unlock it. But if it was updated via ota to 2.3.5. Then its sv2 and unlockable.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Is there a quick way to check the SV level? I assume it might tell me in the bootloader itself?
And thanks for the tips and help again to everyone, very helpful.
Mills00013 said:
Is there a quick way to check the SV level? I assume it might tell me in the bootloader itself?
And thanks for the tips and help again to everyone, very helpful.
Click to expand...
Click to collapse
IIRC, it will error out, harming nothing, if it can't be unlocked. That's what it says in the instructions I received, though.
My Electrify was shipped with 2.3.5, and I'm running Jelly Bean now. I've flashed more ROMs than I can count in the last week alone.
As for the boot loaders (recoveries), CWM-Recovery that comes with the Electrify.zip unlock pack is the same as Joker's v3, and is your standard text-based, no-touch recovery. You navigate with volume and Power is your Enter. TWRP is all-touch, nice as hell. Both should work for you. TWRP is just nicer looking.
Will unlocked version of sprint get an OTA
aukhan said:
Will unlocked version of sprint get an OTA
Click to expand...
Click to collapse
Do you mean "bumped," with TWRP recovery?
If so, you'll still get notified about the OTA. The OTA should fail to run, but on my last device some people had the KitKat update run even though they had a custom recovery, and it screwed up all sorts of things. So don't accept the OTA if you get it.
To make sure you don't get the OTA, see this thread: http://forum.xda-developers.com/lg-g3/development/psa-stop-taking-ota-updates-update-t2909412
If by "unlocked" you mean something else, please explain.
As long as the phones system is totally original with no mods or deleted files you should get ota...depends on how it was unlocked.
Sent from rotary technology Phone
meyerweb said:
Do you mean "bumped," with TWRP recovery?
If so, you'll still get notified about the OTA. The OTA should fail to run, but on my last device some people had the KitKat update run even though they had a custom recovery, and it screwed up all sorts of things. So don't accept the OTA if you get it.
To make sure you don't get the OTA, see this thread: http://forum.xda-developers.com/lg-g3/development/psa-stop-taking-ota-updates-update-t2909412
If by "unlocked" you mean something else, please explain.
Click to expand...
Click to collapse
Droid2drummer said:
As long as the phones system is totally original with no mods or deleted files you should get ota...depends on how it was unlocked.
Sent from rotary technology Phone
Click to expand...
Click to collapse
I am basically getting a used device from a Friend of mine who got it from US and now in India its a Sprint variant and he is currently using it here, Where as he is not in to Rooting and Customizing, Where as I am so Ill be getting the device today evening, I need to know if its unlocked CAN it be locked again by Sprint (Not sure how it was unlocked) if its locked again can i use Bump and Unlock.
aukhan said:
I am basically getting a used device from a Friend of mine who got it from US and now in India its a Sprint variant and he is currently using it here, Where as he is not in to Rooting and Customizing, Where as I am so Ill be getting the device today evening, I need to know if its unlocked CAN it be locked again by Sprint (Not sure how it was unlocked) if its locked again can i use Bump and Unlock.
Click to expand...
Click to collapse
Im sure if its unlocked it can still get ota by flashtool. If system is changed. But as far as root or bump. Certainly can. It can be bumped stumped etc. And flashtool back for ota. Depending how it was unlocked. Meaning if it was rooted to unlock then will have to flashtool back im almost sure. Again if your wanting to make sure it stays unlocked usually once unlocked it will stay. I guess it will depend how. And if oem unlocked then im sure re locking is not much of an option. However you should be fine from many of these worries. Hope not to confuse you. Im very tired. Lol. Trying to cover all bases. There are many ways to unlock many devices on many carriers so its really hard to say. But there are mostly generalized options one would believe.
Sent from rotary technology Phone
Droid2drummer said:
Im sure if its unlocked it can still get ota by flashtool. If system is changed. But as far as root or bump. Certainly can. It can be bumped stumped etc. And flashtool back for ota. Depending how it was unlocked. Meaning if it was rooted to unlock then will have to flashtool back im almost sure. Again if your wanting to make sure it stays unlocked usually once unlocked it will stay. I guess it will depend how. And if oem unlocked then im sure re locking is not much of an option. However you should be fine from many of these worries. Hope not to confuse you. Im very tired. Lol. Trying to cover all bases. There are many ways to unlock many devices on many carriers so its really hard to say. But there are mostly generalized options one would believe.
Sent from rotary technology Phone
Click to expand...
Click to collapse
Thanks for such a detailed answer,
Now when I get the bhone should i be unlocking Bootloader ?
Please suggest me an easy way to ROOT this device?
Which is the most customizied Rom available on this Sprint Thread, I am sure I should not be flashing any other Carrier Roms or International Version of ROM which may Brick the device.
My Friend is claiming that is factory unlocked,Is there a way to find if device is Factory unlocked ??